Share your ROUTE v2.0 Experience
| Note: The last day to take this ROUTE 300-101 exam is February 23, 2020. After this day you have to take new Enterprise exams to get new CCNP Enterprise certification. If you want to find out more about the new exams please visit here. |
The ROUTE 300-101 (ROUTE v2.0) exam has been used to replace the old ROUTE 642-902 exam so this article is devoted for candidates who took this exam sharing their experience.
Please tell with us what are your materials, the way you learned, your feeling and experience after taking the ROUTE v2.0 exam… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note: Posting email is not allowed in the comment section.
Your posts are warmly welcome!
i took exam yesterday passes with good marks 8++/1000.
lots of question are from 477q dump.but they are little tricky..
read carefully the answer and understand properly.
DND:
aaa
dhcp frame relay
frame relay component
adverse network condition:letancy,tcp starvation
gre feature
framerelay lmi
lab:
PBR
EIGRP STUB
EIGRP EVALUATION
OVER ALL ,EXAM IS GOOD SO ,DO NOT WORRY ABOUT It.STUDY HARD.
jeremycisco@
b:generate icmp unreacheble msg for frame
@PAPU
nice, ur good! :)
@Khron
nice, thank you! :)
when do you have exam?
on weekend I try to check your answers.
did you collected them from the topic here, or did u corrected them yourself?
if yes, did you check the whole 477q?
or are these which you notices?
@all: in which dump do we have correct drag and drop answers?
447. A senior network engineer tries to propagate a summary route 209.165.201.0/27 to R2 by redistributing static route on R1, but setup is not working. What is the issue with the configuration on the exhibit.
A. The summary route is on the global routing table.
B. The wildcard bit on network command is incorrect.
C. The redistribute command is on the wring address-family.
D. The route target is missing.
Answer: B or A
Refer to Exhibit
449. Based on the output, which option is the next hop to get to the 130.0.1.0/24 network?
A. 10.30.30.1
B. 10.0.11.1
C. 10.20.20.1
D. 10.10.10.1
Answer: B or A
450. Which feature can mitgate fragmentation issues within oetwork segments that are betweem GRE
endpoints?
A. PMTU
B. ICMP DF bit
C. TCP Fliw Ciotril
D. TCP MSS
Answer: D or C
451. Refer to Exhibit.
The excerpt was taken from the routing table of router SATX. Which option ensures that routes from
51.51.51.1 are preferred over routes from 52.52.52.2?
A. SATX(ciofg-riuter)edistaoce 90 51.51.51.1 0.0.0.0
B. SATX(ciofg-riuter)edistaoce 89.52.52.52.2 0.0.0.0
C. SATX(ciofg-riuter)edistaoce 90.52.52.52.2 0.0.0.0
D. SATX(ciofg-riuter)eadmioistratve distaoce 91 51.51.51 0.0.0.0
E. SATX(ciofg-riuter)edistaoce 89 51.51.51.1 0.0.0.0
F. SATX(ciofg-riuter)eadmioistratve distaoce 91 52.52.52.2 0.0.0.0
Answer: E or B
447. A senior network engineer tries to propagate a summary route 209.165.201.0/27 to R2 by redistributing static route on R1, but setup is not working. What is the issue with the configuration on the exhibit.
A. The summary route is on the global routing table.
B. The wildcard bit on network command is incorrect.
C. The redistribute command is on the wring address-family.
D. The route target is missing.
Answer: B or A
Refer to Exhibit
449. Based on the output, which option is the next hop to get to the 130.0.1.0/24 network?
A. 10.30.30.1
B. 10.0.11.1
C. 10.20.20.1
D. 10.10.10.1
Answer: B or A
450. Which feature can mitgate fragmentation issues within oetwork segments that are betweem GRE
endpoints?
A. PMTU
B. ICMP DF bit
C. TCP Flow Control
D. TCP MSS
Answer: D or C
451. Refer to Exhibit.
The excerpt was taken from the routing table of router SATX. Which option ensures that routes from 51.51.51.1 are preferred over routes from 52.52.52.2?
A. SATX(config-router)#distance 90 51.51.51.1 0.0.0.0
B. SATX(config-router)#distance 89.52.52.52.2 0.0.0.0
C. SATX(config-router)#distance 90.52.52.52.2 0.0.0.0
D. SATX(config-router)#administrator distance 91 51.51.51 0.0.0.0
E. SATX(config-router)#distance 89 51.51.51.1 0.0.0.0
F. SATX(config-router)#admioistratve distance 91 52.52.52.2 0.0.0.0
Answer: E or B
Guys,
who can share them all DND questions? which are valid ones? Thank you
I think
447 – B
449 – I dont know
450 – I dont know
451 – E
Which technology required in an EVN trunk interface?
A. 802.1q
B. NAT
C. VRF-Lite
D. IS-IS
Anwser- VRF-Lite
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/evn/configuration/xe-3s/evn-xe-3s-book.pdf
Edge Interfaces and EVN Trunk Interfaces
User devices are connected to a Layer 2 switch port, which is assigned to a VLAN. A VLAN can be thought
of as a Layer 2 VPN. Customers will group all of the devices that need to be supported in a common Layer
3 VPN in a single VLAN. The point where data traffic is handed off between a VLAN and VRF is called an
edge interface.
• An edge interface connects a user device to the EVN and in effect defines the boundary of the EVN.
Edge interfaces connect end devices such as hosts and servers that are not VRF-aware. Traffic carried
over the edge interface is untagged. The edge interface classifies which EVN the received traffic belongs
to. Each edge interface is configured to belong to only one EVN.
• An EVN trunk interface connects VRF-aware routers together and provides the core with a means to
transport traffic for multiple EVNs. Trunk interfaces carry tagged traffic. The tag is used to de-multiplex
the packet into the corresponding EVN. A trunk interface has one subinterface for each EVN. The vnet
trunk command is used to define an interface as an EVN trunk interface.
Hi gys,
Can Someone send me valid dumps from 477 ?
I am learning only digi ,and I am planning to take exam next week,
thanks
Whats everyone using to study? from what I gather I am going to the use the latest dexter .vce and the updated questions here. Thoughts?
For the NTP question.. how come the answer is A?
A. The router is not syncing with peer, even though the NTP request and response packets are being exchanged?
Is it because the stratum for the +192.168.13.33 and 192.168.13.57 is the same stratum 3?
Hello All,
please advice where we can find the 477 Q dump
Regards,
can you send me that dump please? still looking for an accurate dump.
pch8735 @ naver.com
Hi All
Please send me the dexter and 477 dumps. bhusky1 at gmail dot com
Next week exam.
Kind regards
Bob
@Bob
i added the link for dexter dump on page 93 check that please and let us know if the Qs are still valid once you complete your exam
Passed my exam today. Sims: EIGRP stub, OSPF, EIGRP Eval D n D : Frame relay config, Access list, Frame relay features(LMI, DLCI…). Many of the questions are from 477 dump. Thanks to digitut. Goodluck everyone.
Hi guys,
if there are any answers you think are wrong please share it about 477Q..
@dr.
447. A senior network engineer tries to propagate a summary route 209.165.201.0/27 to R2 by redistributing static route on R1, but setup is not working. What is the issue with the configuration on the exhibit.
A. The summary route is on the global routing table.
B. The wildcard bit on network command is incorrect.
C. The redistribute command is on the wring address-family.
D. The route target is missing.
Answer: B or A
Refer to Exhibit
449. Based on the output, which option is the next hop to get to the 130.0.1.0/24 network?
A. 10.30.30.1
B. 10.0.11.1
C. 10.20.20.1
D. 10.10.10.1
Answer: B or A
@dr.
186. Refer to Exhibit.
Which two reasons for OP SLA tracking failure are likely true? (Choice Two)
A. The source-interface is configured incorrectly.
B. The destination must be 172.30.30.2 for icmp-echo.
C. A route back to the R1 LAN network is missing on R2.
D. The default route has wring next hop OP address.
E. The threshold value is wring.
443. Which two statements about NTP stratum are true? (Choice two)
A. Stratum 15 indicates a device that is nit synchronized
B. Stratum 1 devices receive theory time from a peer that is connected directly to an authoritative time source.
C. The highest stratum level a synchronized device can have is 16.
D. Stratum 2 devices receive their time from a peer that is connected directly to an authoritative time source
E. Stratum 0 devices are connected directly to an authoritative time source
F. Stratum 1 devices are connected directly to an authoritative time source
Answer BF or DF
453. Refer to the exhibit.
Of this configuration is applied to a device that redistributes EIGRP routes into OSPF. which two
statements about the behavior of the device are true? (Choice two).
A. EIGRP routes appears on the routing table as E2 OSPF routes
B. The device router OD is set to Loopback0 automatically
C. The device redistributes all EIGRP networks into OSPF
D. EIGRP routes appears on the routing table as N2 OSPF routes
E. The device redistributes only classful EIGRP networks into OSPF.
F. EIGRP routes appears as type 3 LSAs on the OSPF database.
Answer CE
477. Refer to the Exhibit.
All interfaces on each router are patriating on the EIGRP 100 process. Interface Loopback 2 on HQ- R2 is currently on shutdown mode. An engineer issues the EIGRP stub command on router BR1. Which statements about the query messages sent from router HQ-R2 for a route to reach the 12.12.12.12/32 network is true?
A. Router HQ-R2 sends a query message to the feasible successor for a route to 12.12.12.12/32 network.
B. BR1 receives query messages from HQ-R2 for a route to 12.12.12.12/32 network.
C. Router HQ-R1 receives query messages from HQ-R2 for a route to 12.12.12.12/32 network.
D. Router HQ-R1 and BR1 receives query messages from HQ-R2 for a route to 12.12.12/32 network.
Answer D or C
hi all,
Could you please someone send me the dumps from 477,
I am learning only from digi.
teosoup live com
planning for next week,
many thanks
Hi. Could someone send me dexter dump and .vce? matis1926 at gmail dot com – thank you.
Team,
I came across this site as well:
http://freecram.com/exam/300-101-implementing-cisco-ip-routing-e6956.html
Hi Vince,
Great find but some of the answers are wrong
@ Dri, yes I know; but the content and questions are good. I should have mentioned that some of the answers are wrong.
Update latest stable 2018 CCNP Routing And Switching Dumps.
http://www.ccdedumps.com/dump/route-switch-ccnp.html
For the NTP question.. how come the answer is the following.
Answer: The router is not syncing with peer, even though the NTP request and response packets are being exchanged?
Is it because the stratum for the +192.168.13.33 and 192.168.13.57 is the same stratum 3?
@dr.
186. Refer to Exhibit.
Which two reasons for OP SLA tracking failure are likely true? (Choice Two)
A. The source-interface is configured incorrectly.
B. The destination must be 172.30.30.2 for icmp-echo.
C. A route back to the R1 LAN network is missing on R2.
D. The default route has wring next hop OP address.
E. The threshold value is wring.
443. Which two statements about NTP stratum are true? (Choice two)
A. Stratum 15 indicates a device that is nit synchronized
B. Stratum 1 devices receive theory time from a peer that is connected directly to an authoritative time source.
C. The highest stratum level a synchronized device can have is 16.
D. Stratum 2 devices receive their time from a peer that is connected directly to an authoritative time source
E. Stratum 0 devices are connected directly to an authoritative time source
F. Stratum 1 devices are connected directly to an authoritative time source
Answer BF or DF
453. Refer to the exhibit.
Of this configuration is applied to a device that redistributes EIGRP routes into OSPF. which two
statements about the behavior of the device are true? (Choice two).
A. EIGRP routes appears on the routing table as E2 OSPF routes
B. The device router OD is set to Loopback0 automatically
C. The device redistributes all EIGRP networks into OSPF
D. EIGRP routes appears on the routing table as N2 OSPF routes
E. The device redistributes only classful EIGRP networks into OSPF.
F. EIGRP routes appears as type 3 LSAs on the OSPF database.
Answer CE
477. Refer to the Exhibit.
All interfaces on each router are patriating on the EIGRP 100 process. Interface Loopback 2 on HQ- R2 is currently on shutdown mode. An engineer issues the EIGRP stub command on router BR1. Which statements about the query messages sent from router HQ-R2 for a route to reach the 12.12.12.12/32 network is true?
A. Router HQ-R2 sends a query message to the feasible successor for a route to 12.12.12.12/32 network.
B. BR1 receives query messages from HQ-R2 for a route to 12.12.12.12/32 network.
C. Router HQ-R1 receives query messages from HQ-R2 for a route to 12.12.12.12/32 network.
D. Router HQ-R1 and BR1 receives query messages from HQ-R2 for a route to 12.12.12/32 network.
Answer D or C
kernel March 27th, 2018
hi all,
Could you please someone send me the dumps from 477,
I am learning only from digi.
teosoup live com
I wonder if cisco provides dumps with the wrong answers and then grades those questions more or less….
Die already so many questions with different answers! Tomorrow is my Exam HELP!!!
@dr.
186. Refer to Exhibit.
Which two reasons for OP SLA tracking failure are likely true? (Choice Two)
A. The source-interface is configured incorrectly.
B. The destination must be 172.30.30.2 for icmp-echo.
C. A route back to the R1 LAN network is missing on R2.
D. The default route has wring next hop OP address.
E. The threshold value is wring.
Answer: C,E
443. Which two statements about NTP stratum are true? (Choice two)
A. Stratum 15 indicates a device that is nit synchronized
B. Stratum 1 devices receive theory time from a peer that is connected directly to an authoritative time source.
C. The highest stratum level a synchronized device can have is 16.
D. Stratum 2 devices receive their time from a peer that is connected directly to an authoritative time source
E. Stratum 0 devices are connected directly to an authoritative time source
F. Stratum 1 devices are connected directly to an authoritative time source
Answer: DF
453. Refer to the exhibit.
Of this configuration is applied to a device that redistributes EIGRP routes into OSPF. which two
statements about the behavior of the device are true? (Choice two).
A. EIGRP routes appears on the routing table as E2 OSPF routes
B. The device router OD is set to Loopback0 automatically
C. The device redistributes all EIGRP networks into OSPF
D. EIGRP routes appears on the routing table as N2 OSPF routes
E. The device redistributes only classful EIGRP networks into OSPF.
F. EIGRP routes appears as type 3 LSAs on the OSPF database.
Answer AE
477. Refer to the Exhibit.
All interfaces on each router are patriating on the EIGRP 100 process. Interface Loopback 2 on HQ- R2 is currently on shutdown mode. An engineer issues the EIGRP stub command on router BR1. Which statements about the query messages sent from router HQ-R2 for a route to reach the 12.12.12.12/32 network is true?
A. Router HQ-R2 sends a query message to the feasible successor for a route to 12.12.12.12/32 network.
B. BR1 receives query messages from HQ-R2 for a route to 12.12.12.12/32 network.
C. Router HQ-R1 receives query messages from HQ-R2 for a route to 12.12.12.12/32 network.
D. Router HQ-R1 and BR1 receives query messages from HQ-R2 for a route to 12.12.12/32 network.
Answer D or C ( I not sure )
All interfaces on each router are patriating on the EIGRP 100 process. Interface Loopback 2 on HQ- R2 is currently on shutdown mode. An engineer issues the EIGRP stub command on router BR1. Which statements about the query messages sent from router HQ-R2 for a route to reach the 12.12.12.12/32 network is true?
A. Router HQ-R2 sends a query message to the feasible successor for a route to 12.12.12.12/32 network.
B. BR1 receives query messages from HQ-R2 for a route to 12.12.12.12/32 network.
C. Router HQ-R1 receives query messages from HQ-R2 for a route to 12.12.12.12/32 network.
D. Router HQ-R1 and BR1 receives query messages from HQ-R2 for a route to 12.12.12/32 network.
Answer I strongly believed is C
https://www.cisco.com/c/en/us/td/docs/ios/12_0s/feature/guide/eigrpstb.html
When using the EIGRP Stub Routing feature, you need to configure the distribution and remote routers to use EIGRP, and to configure only the remote router as a stub. Only specified routes are propagated from the remote (stub) router. The router responds to queries for summaries, connected routes, redistributed static routes, external routes, and internal routes with the message “inaccessible.” A router that is configured as a stub will send a special peer information packet to all neighboring routers to report its status as a stub router.
Any neighbor that receives a packet informing it of the stub status will not query the stub router for any routes, and a router that has a stub peer will not query that peer. The stub router will depend on the distribution router to send the proper updates to all peers.
Adding on for Q477:
The EIGRP Stub Routing feature allows a network administrator to prevent queries from being sent to the remote router.
BR1 is eigrp stub enabled, hence it will not receive any updates from the HQ-R1.
@Kitty
can you remember which questions of q477 did u have on the exam
thanks
@rrr
I collected them from the topic here and i tried to find the best answer.
@any kind soul can copy the digitut premium member 7/21 questions with answers? My expired :(
i meant 21st March Update Version
hello friends. why certcollection.org is down? please tell
@ming when is your exam?
how can someone search anything on this site/forum?
(not ctrl+f)
Which value does a point-to-point GRE tunnel use to identify a peer?
A. MAC address
B. configured multicast address
C. DLCI
D. IP address
E. VC ID
Answer: D
If you convert a WAN connection with OSPF from T1 to a Frame Relay circuit, which two actions must you take to enable the connection? (Choose two)
A. Change the OSPF network type to nonbroadcast.
B. Manually configure neighbors in the OSPF process.
C. Manually configure the hello and dead timers.
D. Change the OSPF network type to broadcast.
E. Change the OSPF network type to multipoint nonbroadcast.
Answer: A B
A network engineer wants to baseline the network to determine suitability for real-time voice applications. Which IP SLA operation is best suited for this task?
A. ICMP-echo
B. ICMP-jitter
C. UDP-connect
D. UDP-jitter
E. TCP-connect
F. UDP-echo
Answer: D
Which command do you enter to filter only routing updates that are sent through interface GigabitEthernet0/0?
A. R1(config-if)#passive-interface GigabitEthernet0/0.
B. R1(config-router)#no passive-interface GigabitEthernet0/0
C. R1(config-router)#passive-interface GigabitEthernet0/0
D. R1(config-router)passive-interface default
E. R1(config-if)#passive-interface default
F. R1(config-router)#distribute-list 1 GigabitEthernet0/0 out
Answer: C
If this configuration is applied to a device that redistributes EIGRP routes into OSPF. which two statements about the behavior of the device are true? (Choose two)
A. EIGRP routes appear in the routing table as E2 OSPF routes
B. The device router ID is set to Loopback0 automatically
C. The device redistributes all EIGRP networks into OSPF
D. EIGRP routes appears in the routing table as N2 OSPF routes
E. The device redistributes only classful EIGRP networks into OSPF
F. EIGRP routes appears as type 3 LSAs in the OSPF databas
Answer: C E
Somebody clarify please? from my understand it should be A?
Which statement about stateless and stateful IPv6 autoconfiguration are true?
A. Both stateless and stateful autoconfiguration require additional setup
B. Stateless autoconfiguration requires no additional setup, whereas stateful autoconfiguration requires additional setup
C. Stateless autoconfiguration requires additional setup, whereas stateful autoconfiguration requires no additional setup
D. Both stateless and stateful autoconfiguration require no additional setup
@jeremyCisco
what questions are these?
from where are they?
@dot1q
Answer:D
https://networkengineering.stackexchange.com/questions/21162/stateful-vs-stateless-ipv6
Please share CCNP ROUTE questions
Hi Guys,
which is the correct for this DnD?
+ Address registration – It allows neighboring Cisco devices to exchange management IP addresses
+ Global addressing – It enables the Frame Relay network to identify interfaces in the same manner as a LAN
+ Multicasting – It provides the most efficient transmission of routing protocol messages and supports address resolution
+ Simple flow control – It supports devices that are unable to use congestion notification
+ Virtual circuit status messages – It prevents data from being transmitted into black holes
OR
+ Address registration – It provides the most efficient transmission of routing protocol messages and supports address resolution
+ Global addressing – It allows neighboring Cisco devices to exchange management IP addresses
+ Multicasting – It enables the Frame Relay network to identify interfaces in the same manner as a LAN
+ Simple flow control – It supports devices that are unable to use congestion notification
+ Virtual circuit status messages – It prevents data from being transmitted into black holes
Best materials ever rapidteria . com /8AnX
@asdf
+ Address registration – It allows neighboring Cisco devices to exchange management IP addresses
+ Global addressing – It enables the Frame Relay network to identify interfaces in the same manner as a LAN
+ Multicasting – It provides the most efficient transmission of routing protocol messages and supports address resolution
+ Simple flow control – It supports devices that are unable to use congestion notification
+ Virtual circuit status messages – It prevents data from being transmitted into black holes
I think , this is the correct one..
@vince, thank you sir :)
@dot1q
Which statement about stateless and stateful IPv6 autoconfiguration are true?
A. Both stateless and stateful autoconfiguration require additional setup
B. Stateless autoconfiguration requires no additional setup, whereas stateful autoconfiguration requires additional setup
C. Stateless autoconfiguration requires additional setup, whereas stateful autoconfiguration requires no additional setup
D. Both stateless and stateful autoconfiguration require no additional setup
Answer is B.
i dont really agreed with Answer D as stateful DHCP requires additional parameters like DNS addresses. I understand many questions here are confusing and misleading from different dumps, the only way is to find the truth for ourselves.
http://www.orbit-computer-solutions.com/ipv6-stateful-autoconfiguration-dhcpv6-explained/
@ dot1q
In real exam I will choose B , because
Stateless IPv6 is SLAAC which is not require DHCPv6 to get IPv6 address, it will be get address from RA message link-local router, which is automatic, with command on default router ipv6 address autoconfig
Stateful IPv6 – must only get IPv6 address from DHCPv6 server, and for this reason You need to declare on default router on Host with ipv6 address dhcp, and must declare DHCPv6 server router with address prefix rather than Stateless, so it must be intervation on Stateful in IPv6
For this reason I will choose B