Share your ROUTE v2.0 Experience

can anyone send dexter dumps rjadhav163 at gmail dot com

QUESTION 54
Other than a working EIGRP configuration, which option must be the same on all routers for EIGRP
Dexter ITC
authentication key rolleover to work correctly?
A. SMTP
B. SNMP
C. Passwords
D. Time

which is which? C or D?

i need latest dumps for exam ,can anyone give me the links?

abcd .alian28 @ gmail com

@Marco
QUESTION 54
Other than a working EIGRP configuration, which option must be the same on all routers for EIGRP authentication key rolleover to work correctly?
A. SMTP
B. SNMP
C. Passwords
D. Time

which is which? C or D?

Reference Title: EIGRP Message Authentication Configuration Example
Link: !!!https://www.cisco.com/c/en/us/support/docs/ip/enhanced-interior-gateway-routing-protocol-eigrp/82110-eigrp-authentication.html#maintask1

Question breakdown: note the question reads “…working EIGRP configuration..”, which means that the prerequisites have been met i.e. the time was correctly configured as per the Cisco document. This leaves password to be the remaining piece of the puzzle.

Prerequisites:
Requirements::
1. The time must be properly configured on all routers. Refer to Configuring NTP for more information.
2. A working EIGRP configuration is recommended.

Any challengers?
*those looking for dumps please email @ {email not allowed}/share-your-route-v2-0-experience and please include your name and date of birth in the subject.

question no 459

Based on the output, which option is the next hop to get to the 130.0.1.0/24 network?

A. 10.30.30.1
B. 10.0.11.1
C. 10.20.20.1
D. 10.10.10.1

Answer : c is correct

Router# show ip bgp

BGP table version is 6, local router ID is 10.0.96.2
Status codes: s suppressed, d damped, h history, * valid, > best, i – internal,
r RIB-failure, S Stale, m multipath, b backup-path, x best-external, f RT-Filter, a additional-path
Origin codes: i – IGP, e – EGP, ? – incomplete
RPKI validation codes: V valid, I invalid, N Not found

as per the question show ip bgp output
* valid, > best, i – internal
*>i10.20.20.1 is the next hop to get to the 130.0.1.0/24 network

certcollection.org is down :(

question no 455

A network engineer has configured NTP on a Cisco router, but the time on the router is still incorrect. What is the reason for this problem?

A. The router is not syncing with the peer, even though the NTP request and response packets are being exchanged.
B. The router is not syncing with peer, and the NTP request and response packets are not being exchanged.
C. The router is syncing with the peer, and the NTP request and response packets are being exchanged.
D. The router is dropping all NTP packets.

Answer: D

correct answer :- A

https://www.cisco.com/c/en/us/support/docs/ios-nx-os-software/ios-software-releases-110/15171-ntpassoc.html

A pound sign (#) displayed next to a configured peer in the show ntp associations command output indicates that the router isn’t syncing with the peer even though NTP request and response packets are being exchanged.

Hello
tell me when you buy “Premium Membership”
is it useful?
or just a waste of money?

when will the version of the exam change?

@Tomcat – could you send me Q477 dump? Thank you. matis1926 at gmail dot com

Anyone can send the latest dumps?
bhusky1 at gmail dot com

477q contains quite a lot of wrong answers, even some of the drag and drop questions has wrong answers, that dumps needs to undergo serious quality control.

I faced one issue in Eigrp Sim, i cannot insert command “show eigrp topology” during lab exam. So i used Show ip route in the opposite router finally found FD and made is as AD for the another router

@Tomcat – thanks a lot. Someone has. Vce versions of this dumps? It you have – send me to matis1926 at gmail dot com thanks

Hi all,

Can anyone share is thoughts about the next question?

What are the default timers for RIPng?
A. Update:30 seconds Expire:180 seconds Flush:240 seconds
B. Update:20 seconds Expire:120 seconds Flush:160 seconds
C. Update:10 seconds Expire:60 seconds Flush:80 seconds
D. Update:5 seconds Expire:30 seconds Flush:40 seconds

Both digitaltut and 477Q says that the answer is A, but Cisco documentation says that the flush timer (called “Garbage-collection”) default is 120 seconds.
In 477Q we are talking about Q117

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipv6/command/ipv6-cr-book/ipv6-s6.html

Any one has an idea about the correct answer might be?
Thx for the help

Which option is the minimum logging level that displays a log message when an ACL drops an incoming packet?
A. Level 6
B. Level 5
C. Level 7
D. Level 3

answers ? level 6 or 7?

Hey guys, I’ve just past the exam with 9xx!
There is no need in sharing questions from exam because absolutely every question was from dumps.
I studied digit, dexter, Chinese and new one 470q dumps.
Keep in mind that you must understand the material, because in some questions I gave the different ans from dump, because it was more correct in my opinion.
IMPORTANT NOTE! I had eigrp eval Sim, and in question with load-sharing from R1 to R6 loop we must see 2 routes, BUT there is only one route. I entered “sh ip route X. X. X. X” and everything was OK, two routes with load-sharing 19:80. Keep this in mind.
Good luck!

hi TOMCAT ,
congratulation for your pass CCNP
anyway can u send the lastest dump Q.477 to kuotamartku @ gmail . com

thanks tomcat

Hi guys, can you share the D&D of DHCP Realy Information?

@crouting, sometimes you need to deploy elimination method to get at the right answers.

From the option, there is only one correct HELLO timer, 30 and that leave option A as the best possible answers. Rip send hellos every 30seconds, so regardless of what the other timers may be. By eliminating the wrong Rip Hello timers we are left with A

hello,

can someone send me a vce file?

ccnp7410 gmail com

thanks

@chuks.. you are right, though maybe the answers of this question is wrong.

anyways thanks :)

does anyone have a corrected version of the 477Q dump?

Hi guys…
those 477Q (dexter) are available on Premium?

Q387 is wrong, to disable splithorizon on RIPNG #ipv6 router rip x, (config-rtr) #no split horizon, should be B

Q396,397,400 are all wrong(All drag & drop questions)

Also Q452 answer is wrong.
The CEF table that holds forwading info is both the FIB table and the adjacency table (dumps says its adjacency only)

Q453 is also wrong. External routes should up in the Ospf routing table as E2. it should be AE

457 is also wrong. When Ipv6 filters traffic, it sends an ICMP unreachable message of type 1. Should be D.

460 is wrong, we use UDP jitter to determine suitability real time voice apps not UDP echo(this is for just end to end response).

465 is also wrong.
You cannot use uRPF with both strict and lose mode.
its either one of them not both of them. Correct answer should be B and F. You can only apply uRPF on a per Interface basis. so B,F

467 is also wrong, Noauth NoPriv doesn’t provide encryption in SNMP. Correct answer is D authPriv.

This dump is riddled with lots for errors. There are many more wrong answers but I can’t type them all

the above is referring to the 477 dumps shared on page 89

@chuks

@all

does someone have a software to update or correct the 477q pdf questions?

@rrr You can use Adobe Acrobat (full package not reader) to edit the pdf.
If you edit in any other application or export the PDF to any other format the text is garbled so due to this also not possible to make a vce out of it.

I compared the 477Q file with dexter v1.8 15.12.2017 and noticed only 98 questions are new in it and 3 new DND so use Dexter for easy practice (477Q has too many wrong answers) and practice the new questions only from 477Q

Hi Desi7896…
Dump Q477 is not dexter version ?? I though its same. on what page can I find Dexter version. tha.

Just studied digi and dexter. There were a lot of wrong answers in dexter. Met a lot of new questions today. March 7/21 updates in Digi are valid I think all of them was in my exam. On the other questions I think dumps are wrong I had to understand and answer the questions myself. Dont just memorize the answers but understand the concepts. Had eigrp stub&eval and pbr for labs.

Passed with 8xx/1000

@ Lazy –Congrats!!!!

Would you happen to have the questions from Digi????

@lazy can you please share the Dumps with me (hsnswitch gmail com)

Lazy congrats !!!!!

I am taking exam tommorow,

Do you remember the drag & drop ,labs are from digi,
could you share any new question you faced

teosoup gmail com

thanks

@Lazy, congrats! So worth it now to register here to get a premium membership?

Failed the exam 736/1000 passing 790/1000. DON’T BUY PASS4SURE OR CERTCOLLECTION PREMIUM. ALL GARBAGE. Saw a LOT of questions from that Q477 but not sure if the answers are valid since I failed.

@lazy congratzz man!!
Can you please send me the new dumps in debug12762543+gmail+com. Thanks a lot.

BTW, I got eigrp eval and ospf eval simlet. eigrp stub for lab.

If there are four questions on the simlet (e.g. EIGRP & OSPF) and miss one of the four questions, do you fail the entire simlet?

Hi All

Could anyone send me dumbs for Q477?

bhusky1 at gmail dot com

Got exam in 1 week

Kind Regards

Bob check page 89, the 477 dumps link is there

Hello ALL

Can someone please provide the dexter and 477 dumps or let me know where can i find it

thanks

Hey guys,

i did a search on this forum and found the final dump from Dexter… maybe someone who has the exam on the next days could take a look and let us know if is still valid to pass the exam.

thanks in advance.

https://mega.nz/#F!tNtkSB5A!4Glpa9BrYDbAcAPsbtmDjA

@Lazy

can you send your materials or please post a google drive of your dumps. here’s my email: flashmemento at gmail dot com

Lazy – can you help me out as well please & send dumps to mare_balleza at hotmail dot com?

can anyone post the corrected 477Q dump?

Guys, any update regarding DND. i will take my exam next week..

when a packet is denied by an ipv6 traffic filter,which additional action does the device perform?

A.It scams the rest of ACL for permit entry matching the destination.
B.It generates an ICMP unreachable message for the frame.

what is the correct answer?

@teosoup

how was your exam?

@OldTimer

do you remember questions if you check 477 or dexter, which ones did u have?

I tried to make a compilation of 477Q’s good answers :

Q186 -> AC

Q187 -> AE

Q190 -> AD

Q387 -> B

Q390 -> AB

Q409 -> BCD

Q443 -> DF

Q447 -> A

Q449 -> B

Q450 -> B

Q451 -> B

Q452 -> C

Q453 -> AE

Q455 -> A

Q457 -> D

Q460 -> D

Q465 -> BF

Q467 -> D

Q477 -> C

If you check a bad answer, please tell it