Share your ROUTE v2.0 Experience

I used a lot of materials to study and I did any kind of dumps :-D, but the last question was from

dropbox link at page 88 from @CCNP New questions
and mega.. link at the start of this page from @BinSiddique

@EIGRP Stub_Passed.. congratulations!! Can you please share which dump did you use? Do you have .vce of that dump?

I used dexter vce for test for a long time, but last question from pdf (dropbox link on previous page)

@EIGRP Stub_Passed thanks and congrats :)

Hello everyone

I will start with my studies to be able to pass the route 300-101 exam, I hope I can count on your support and help you as much as I can.

regards

@EIGRP Stub_Passed
Well done bro

@FirePOWDER
How can I help you?
ccienzir$at$gmail$dot$com

@tomcet hi,

Do you have a .vce format file for 477Q?

Thank you

@Dr sorry bro I don’t have

@dr
Sorry I don’t have
just remind you ~ 20 MCQ has different(possibly wrong answer) is 477Q
I’m using the ” Project X – Digital-Tut + CERTbus + PassLeader”
not too bad but new question in Q477 is more useful

I’m using the ( Project X – Digital-Tut + CERTbus + PassLeader- 15.12.2017)

just remind you ~ 20 MCQ has different(possibly wrong answer) is 477Q

@EIGRP Stub_Passed

Congrats,and thanks for sharing experience

Thanks to you all for the support!!

he excerpt was taken from the routing table of router SATX. Which option ensures that routes from 51.51.51.1 are preferred over routes from 52.52.52.2?
A. SATX(config-router)#administrative distance 91 52.52.52.2 0.0.0.0
B. SATX(config-router)#distance 89 51.51.51.1 0.0.0.0
C. SATX(config-router)#distance 89.52.52.52.2 0.0.0.0
D. SATX(config-router)#administrative distance 91 51.51.51 0.0.0.0
E. SATX(config-router)#distance 90 51.51.51.1 0.0.0.0
F. SATX(config-router)#distance 90.52.52.52.2 0.0.0.0

answer – B. SATX(config-router)#distance 89 51.51.51.1 0.0.0.0

I am planning for my exam tomorrow by the will of ALLAH. Will update here once finished
Very well done and explained by EIGRP Stub_Passed. Thanks a lot

@BinSiddique
Good luck

@tomcat,

which answers are wrong? does anyone knows?

@dr
I found 455,457,460,467
but I’m sure it’s more, honestly I’m really busy at work and I have exam in 3 days, but I’ll try to find the all wrong answers and posted here

Thank you for your help tomcat, we are grateful to you @tomcat

Hello, all marked (my answer) are that I corrected, other answer that was not in my exam are:
[Not in Exam] 460 D (my answer)
[Not in Exam] 455 A (my answer)
[Not in Exam] 453 AE (my answer)
[Not in Exam] 450 D ((my answer, if PMTUD la answer A)
[Not in Exam] 447 A (my answer)
[Not in Exam] 443 DF (my answer)
[Not in Exam] 440 B (my answer)
[Not in Exam] 439 A (my answer)

———————–
Another present for you all ;-)
Q with exhibit like q129/q130 (new dump)
Refer to the exhibit. Which option prevents routing updates from being sent to the DHCP router, while still
allowing routing update messages to flow to the Internet router and the distribution switches?

A. core(config)# access-list … deny
core(config)# access-list … permit
core(config-router)# distribute-list .. out

B. core(config)# access-list … deny
core(config)# access-list … permit
core(config-if)# distribute-list .. out

C. DHCP(config)# access-list … deny
DHCP(config)# access-list … permit
core(config-router)# distribute-list .. out

D. core(config)# access-list … deny
core(config)# access-list … permit
DHCP(config-if)# distribute-list .. out

My Answer: A

@EIGRP Stub_Passed
Thank you very much

@tomcast
Please send me skhan1234 at gmail dot com
Will wait for your response
Thanks

@tomcat sent vir to email @EIGRP Stub_Passed

Congrats,and thanks for sharing experience. Thank you Thank you

I will take exam in tomorow. (2nd) I hope we will go through together.

@tomcat
Hello,
Please send the dumbs here
Ahmed (dash) srf (at) hotmail(dot)com

anyone have last dump please send: mohamedatefelgendy at gmail.com

any latest questions guys or anyone taken it recently, share i will update soon

Hey guys,
I want to compile an updated VCE file (will take me quite some time though).
I’m using 477Q PDF for this and I’ll be checking the answers as best as possible.
anyone who took/is taking the exam please share new questions over to my mail.
also, if you have encountered wrong answers (aside from those posted in the last 3 pages), feel free to send over and it will make my work easier.
I’ll share the VCE as soon as I’m done, of course.
Mail –
CRouting300 2 gmail _ com

Thank Alot

Hi All,
Greetings for the day.
Passed Yesterday with 9**/1000. Thanks Digital tut.
Got certain new question.
1) The Neighbor Discovery Protocol in ipv6 is replaced with which discovery protocol in ipv4?
(select One)
A. ARP
B. ICMP
C. UDP
D. TCP

2) Drag and Drop of dhcp in comment section.
3) One question of VRF was there same like yellow type but all the configuraton was given and EIGRP was running on both also option was to select which command you will write in both to make communication happen:-
A R1(Config-vrf)# Route target both
B R1(Config-vrf-af)#Eigrp Autonomous 100
C , D
i choosed Route Target, dont know if write or wrong.

More i cannot recollect.

Yes one more with dhcp along with what option you will choose:-
a) Option b) Scope …..

Study hard its not easy to pass.

@salman rokadia.. Congrats!! what material did you use?
447Q? Dexter’s?

I just pass the Exam.

3 lab questions
PBR
EIGRP EVAL SIM
EIGRP STUB

Q. (This was quite confusing question in exam)
What is the reasons of command: (question like this with public community)
router(config)#snmp-server host 192.168.1.3 traps version 2c CISCORO
A. For network system to management server
B. allow 192.168.1.3 only
C. Alllow 192.168.1.3 to connect with CISCORO community string
D. …

I choosed C..

Use Digital Tut which contain mostly all the question as in dumps.
Latest updated question you can find in the comment question.
Study the concept properly, can rely fully on dumps

In a point-to-multipoint Frame Relay topology, which two methods ensure that all routing updates are received !!! one of the options was enable split horizon. So pay attention. by all EIGRP routers within the Frame Relay network? (Choose Two)
A. Use statically defined EIGRP neighbors on the hub site.
B. Create separate address families.
C. Disable split horizon.
D. Use subinterfaces.
What is the correct answer????

@wilson
C, D

Hi,

I would like to hear your opinion on Q6 in DHCPv6 section.
Consider this scenario. TCP traffic is blocked on port 547 between a DHCPv6 relay agent and a DHCPv6 server that is configured for prefix delegation. Which two outcomes will result when the relay agent is rebooted? (Choose two)
A. Routers will not obtain DHCPv6 prefixes.
B. DHCPv6 clients will be unreachable.
C. Hosts will not obtain DHCPv6 addresses.
D. The DHCPv6 relay agent will resume distributing addresses.
E. DHCPv6 address conflicts will occur on downstream clients.

Answer: A D
===
shouldn’t the answer be A & C?

plz share the latest dumps of CCNP 300-101 abdulrehmandwp@ gmail dot com

@ EIGRP Stub_Passed Congratulations man,

I WOULD LIKE TO HELP US WHICH QUESTIONS ARE WRONG IN DEXTER BESIDE TUT, BECAUSE HAD SOME DIFFERENCE ANSWERS OF SOME QUESTIONS, PLEASE SHARE WITH MARKS WHICH QUESTIONS IN DEXTER ON YOUR OPONION ARE CORRECT AS LIKE YOU DID WITH NEW DUMP?

THANK YOU MAN AND CHEERS
I WISH YOU ALL THE BEST

@anyone having an exam in the next days?

@Someone17

copy here the q-s which are with different answers in the dumps, so we can discuss them

Alhamdulilah
Guys I did it …. I passed P-R today with 9**
It was very difficult exam because of two reasons(10 new questions and very tricky plus different from posted on many sites)
I used Kevin W. book + Kevin W. Video tutorial + Jeremy Video Tutor + Keith Barker Lab
I set up a lab environment with GNS3
Regarding to dumps I covered (PassLeader, Digital-Tut, Dexter, Dokdo and Every Questions posted From Page number 70 upto yesterday)
Guys its not a good time to take the exam but you can pass if you have a good foundation and practice.

I would like to thank Everyone including you
I will post two new questions.

@ EIGRP Stub_Passed and ALL
what is true answer for this DnD because 477Q and Chinese Dmp have different answ\. Need your Clarify Thx

1A.
excessive unicast flooding ————caused by including a host port in STP
out-of-order packets ———————-Potential result of disabling FIFO TCP
starvation—————————— Potential effect of excessive UDP traffic on link
asymmetric routing ———————-Cause of inconsisten traffic patterns
latency—————————————– condition in which packets require an excessive length of time

OR

1B.
out-of-order packets ————caused by including a host port in STP
excessive unicast flooding ———————-Potential result of disabling FIFO
TCP starvation—————————— Potential effect of excessive UDP traffic on link
latency ———————-Cause of inconsisten traffic patterns
asymetric routing—————————————– condition in which packets require an excessive length of time

2A
Tunnel key – A Clear Text password that confirms the peer connection
Keepalive – A configure Value…. the tunnel
mGre – A Technology prevent…stays up
MSS – A technology that support dynamic tunnel endpoint
IPsec – An Encryption protocol

OR

Tunnel key – A Clear Text password that confirms the peer connection
MSS – A configure Value…. the tunnel
Keepalive – A Technology prevent…stays up
mGre – A technology that support dynamic tunnel endpoint
IPsec – An Encryption protocol

@ Enjeru Exactly as what i reckon.

547 are the listen ports on server and relay while 546 is the listen port on client

if 547 is blocked, no request will be made through neither any prefix will be there from server to relay agent. so i reckon A and c are correct.

Passed today 8**/1000, Please follow below link for the dump to see the questions

https://www.dropbox.com/s/b7mzl82ihy0v214/300-101%20%281%29.pdf?dl=0

Q4, Answer (Same as Dump)
Q49, Answer (Same as Dump)
Q143, Answer (Same as Dump)
Q151, Answer (Same as Dump)
Q157, Answer (Same as Dump)
Q171, Answer (Same as Dump)-Not sure about the answer
Q182, Answer (Same as Dump)
Q183, Answer (Same as Dump)
Q186 (Question was not exactly same as it offered to choose 1 answer only and configuration was a little different), Answer (I chose C)
Q190, Answer ( I chose A & D)
Q192, Answer (Same as Dump)
Q202, Answer (Same as Dump)
Q237, Answer (Same as Dump)
Q259, Answer (Same as Dump)
Q260, Answer (Same as Dump)
Q261, Answer (Same as Dump)
Q266, Answer (Same as Dump)
Q268, Answer (Same as Dump)
Q387, Answer (I chose B)
Q388, Answer (Same as Dump)
Q390, Answer (I chose A & B)
Q391, Answer (Same as Dump)
Q409, Answer (I chose B,C & D)
Q415, Answer (Same as Dump)
Q435, Answer (Same as Dump)
Q438, Answer (Same as Dump)
Q439, Answer (Same as Dump)
Q440, Answer (Same as Dump)
Q441, Answer (I chose D & E)-Not sure about the answer
Q442, Answer (Same as Dump)
Q443, Answer (I chose D & F)
Q445, Answer (Same as Dump)
Q446, Answer (Same as Dump)
Q447, Answer ( I chose A)-Not sure about the answer
Q448, Answer (Same as Dump)
Q449, Answer (I chose B)-Not sure about the answer
Q450, Answer (I chose D)
Q451, Not sure about the answer
Q452, Answer (I chose C)
Q453, Answer (I chose A & E)
Q455, Answer (I chose A)
Q456, Answer (Same as Dump)
Q457, Answer (I chose D)
Q458, Answer (Same as Dump)
Q459, Answer (Same as Dump)
Q460, Answer (I chose D)
Q464, Answer (Same as Dump)
Q477 (Options were totally different, can’t remember them)

DND: 1)Frame Relay(FECN,LMI…etc), Q270
2)AAA Authentication, Q444
3)ACL(Reflexive, Standard, Extended …etc), Q454

LABs: 1)EIGRP STUB, Q32
2)EIGRP Evaluation Sim, Q36 to Q40
3)OSPF Evaluation Sim, Q41 to Q44

Passed today 8**/1000, Please follow dumps shared by “CCNP new question” on page 88 to see the questions I faced as below

Q4, Answer (Same as Dump)
Q49, Answer (Same as Dump)
Q143, Answer (Same as Dump)
Q151, Answer (Same as Dump)
Q157, Answer (Same as Dump)
Q171, Answer (Same as Dump)-Not sure about the answer
Q182, Answer (Same as Dump)
Q183, Answer (Same as Dump)
Q186 (Question was not exactly same as it offered to choose 1 answer only and configuration was a little different), Answer (I chose C)
Q190, Answer ( I chose A & D)
Q192, Answer (Same as Dump)
Q202, Answer (Same as Dump)
Q237, Answer (Same as Dump)
Q259, Answer (Same as Dump)
Q260, Answer (Same as Dump)
Q261, Answer (Same as Dump)
Q266, Answer (Same as Dump)
Q268, Answer (Same as Dump)
Q387, Answer (I chose B)
Q388, Answer (Same as Dump)
Q390, Answer (I chose A & B)
Q391, Answer (Same as Dump)
Q409, Answer (I chose B,C & D)
Q415, Answer (Same as Dump)
Q435, Answer (Same as Dump)
Q438, Answer (Same as Dump)
Q439, Answer (Same as Dump)
Q440, Answer (Same as Dump)
Q441, Answer (I chose D & E)-Not sure about the answer
Q442, Answer (Same as Dump)
Q443, Answer (I chose D & F)
Q445, Answer (Same as Dump)
Q446, Answer (Same as Dump)
Q447, Answer ( I chose A)-Not sure about the answer
Q448, Answer (Same as Dump)
Q449, Answer (I chose B)-Not sure about the answer
Q450, Answer (I chose D)
Q451, Not sure about the answer
Q452, Answer (I chose C)
Q453, Answer (I chose A & E)
Q455, Answer (I chose A)
Q456, Answer (Same as Dump)
Q457, Answer (I chose D)
Q458, Answer (Same as Dump)
Q459, Answer (Same as Dump)
Q460, Answer (I chose D)
Q464, Answer (Same as Dump)
Q477 (Options were totally different, can’t remember them)

DND: 1)Frame Relay(FECN,LMI…etc), Q270
2)AAA Authentication, Q444
3)ACL(Reflexive, Standard, Extended …etc), Q454

LABs: 1)EIGRP STUB, Q32
2)EIGRP Evaluation Sim, Q36 to Q40
3)OSPF Evaluation Sim, Q41 to Q44

@Binsiddique

this is a nice post, thenk you, and congratulations!

what’s next?

FOR EVERY ONE WHICH IS WANT TO CLEARFY THE DIFFERNCE ANSWERS OF SOME QUESTIONS BETWEEN DEXTER AND TUT. THE QUESTIONS ARE AS BELOW:

Section: 1.0 Network Principles
QUESTION 14
In which scenario can asymmetric routing occur?
A. active/active firewall setup
B. single path in and out of the network.
C. active/standby firewall setup
D. redundant routers running VRRP

Correct Answer: A in Dexter ; D in TUT

—————————————————————————————–
3.0 Layer 3 Technologies
QUESTION 1
Which statement about stateless and stateful IPv6 autoconfiguration are true?
A. Both stateless and stateful autoconfiguration require additional setup
B. Stateless autoconfiguration requires no additional setup, whereas stateful autoconfiguration requires
additional setup
C. Stateless autoconfiguration requires additional setup, whereas stateful autoconfiguration requires no
additional setup
D. Both stateless and stateful autoconfiguration require no additional setup
Correct Answer: A ???
——————————————————————————————
3.0 Layer 3 Technologies
QUESTION 29
What is the output of the following command:
show ip vrf
A. Show’s default RD values
B. Displays IP routing table information associated with a VRF
C. Show’s routing protocol information associated with a VRF.
D. Displays the ARP table (static and dynamic entries) in the specified VRF

Correct Answer: A ???
——————————————————————————————
Section: 3.0 Layer 3 Technologies
QUESTION 52
What is the hop count …RIP?
A. 15
B. 255
C. 0
D. 16

Correct Answer: A ???
——————————————————————————————–
Section: 3.0 Layer 3 Technologies
QUESTION 69
Which command prevents routers from sending routing updates through a router interface?
A. defaultmetric 0
B. distribute-list in
C. passive-interface
D. distribute-list out

Correct Answer: C in Dexter ; D in TUT ???
———————————————————————————————
Section: 3.0 Layer 3 Technologies
QUESTION 72
Which ospf area prevent LSA type 4, LSA type 5? (Choose two)
A. not so stubby
B. total stubby
C. stubby area

Correct Answer: BC in Dexter ;AB in TUT ???
——————————————————————————————–
Section: 3.0 Layer 3 Technologies
QUESTION 79
Which the Valid range for BGP private ASNs?
A. 64512-65535
B. 62640-65535
C. 32024-65535

Correct Answer: A in Dexter and TUT , but more people say that the answer is 64512-65534 ???
————————————————————————————————
Section: 3.0 Layer 3 Technologies

QUESTION 81
When ospf is forming an adjacency, in which state, the actual exchange of information in the link?
A. INIT
B. loading
C. exstart
D. exchange

Correct Answer: B in Dexter; C in TUT ?????
————————————————————————————————-
Section: 3.0 Layer 3 Technologies
QUESTION 82
Using new backup router in spite of faulty one in ospf domain but relationship with neighbor in one interface
Dexter ITC
only not working , what is the reason of this problem? (Choose 2)
A. area Id mismatch
B. authentication mismatch
C. process id of ospf not match
D. ospf timers not match

Correct Answer: AD in Dexter; AB (D?) in TUT ???????????
————————————————————————————————
Section: 5.0 Infrastructure Security
QUESTION 11
When unicast reverse path forwarding is configured on an interface, which action does the interface take first
when it receives a packet?
A. it verifies that the source has a valid VEF adjacency.
B. It checks the egress access lists.
C. it verifies a reverse path via the FIB to the source.
D. It checks the ingress access lists.

Correct Answer: C in Dexter ; D in TUT ???????????????????????????
———————————————————————————————–
Section: 5.0 Infrastructure Security
QUESTION 24
Which access list used to filter upper layer protocol?
A. extended acl
B. standart acl
Dexter ITC
C. reflexive acl
D. time based acl
E. dynamic acl

Correct Answer: A in Dexter and TUT; but for me from D&D this point more at reflexive acl, not extended a don’t know if it is correct ??????????????????????????????????????????????
———————————————————————————————-
6.0 Infrastructure Services
QUESTION 1
Refer to exhibit. Which two reasons for IP SLA tracking failure are likely true? (Choose two)
R1(config)#ip sla 1
R1(config-ip-sla)#icmp-echo 172.20.20.2 source-interface FastEthernet0/0
R1(config-ip-sla-echo)#timeout 5000
R1(config-ip-sla-echo)#frequency 10
R1(config-ip-sla-echo)#threshold 500
R1(config)#ip sla schedule 1 start-time now life forever
R1(config)#track 10 ip sla 1 reachability
R1(config)#ip route 0.0.0.0 0.0.0.0 172.20.20.2 track 10
R1(config)#no ip route 0.0.0.0 0.0.0.0 172.20.20.2
R1(config)#ip route 0.0.0.0 0.0.0.0 172.30.30.2 5

A. The source-interface is configured incorrectly
B. The destination must be 172.30.30.2 for icmp-echo
C. A route back to the R1 LAN network is missing in R2
D. The default route has wrong next hop IP address E. The threshold value is wrong

Correct Answer: AC in Dexter; CE in TUT ??????????????????????

—————————————————————————————————-
Section: 6.0 Infrastructure Services
QUESTION 8
Refer to the exhibit
configure terminal
ip flow-export destination 192.168.10.1 9991
ip flow-export version 9

How can you configure a second export destination for IP address 192.168.10.1?

A. Specify a different TCP port
B. Specify a different UDP port
C. Specify a VRF
D. Configure a version 5 flow-export to the same destination
E. Specify a different flow ID

Correct Answer: C in Dexter; B in TUT ???????????????????????

——————————————————————————————————–
Section: 6.0 Infrastructure Services
QUESTION 10
If you configure one router in your network with the auto-cost reference bandwidth 100 command, which effect
on the data path is true?

A. The data path remains the same for all links.
B. The data path changes for 10 Mbps links only.
C. The data path changes for all links.
D. The data path changes for 10 Gbps links only.

Correct Answer: A in Dexter; C in TUT ???????

———————————————————————————————————
Section: 6.0 Infrastructure Services
QUESTION 36
Where the output will be shown of the command debug condition interface fa0/1?

A. it will show on interface f0/1
B. it will show on interface f0/0
C. both interfaces will show debugging output
D. an interface cannot be used as condition

Correct Answer: A in Dexter; C in TUT ??????????????
———————————————————————————————————
Section: 6.0 Infrastructure Services
QUESTION 53
Which option must be configured on a target device to use time stamping to accurately represent response
times using IP SLA?
A. Responder
B. Jitter value
C. TCP Connect
D. ICMP Echo

Correct Answer: A in Dexter; in TUT no answer ?????????????

——————————————————————————————————–
Section: 6.0 Infrastructure Services
QUESTION 92
When use NPTv6 for IPV6 to IPV6 Address translation? (Choose two)

A. stateful address translation
B. a limit of 32 1-to-1 translations
C. lack of overloading functionality
D. identify all interface NAT inside or outside
E. one-to-one prefix rewrite
F. mismatched prefix allocations

Correct Answer: CE in Dexter; CF in TUT ????????????????????
——————————————————————————————————–
Section: Heavy stuff
QUESTION 4
Which three NTP operating modes must the trusted-Key command be configured on for authentication to
operate properly? (Choose Three)

A. interface
B. client
C. peer
D. server
E. broadcast

Correct Answer: BCE in Dexter; BDE in TUT ????????????????????????

——————————————————————————————————–
Section: Heavy stuff
QUESTION 10
The enterprise network WAN link has been receiving several denial of service attacks from both IPv4 and IPv6
sources.
Which three elements can you use to identify an IPv6 packet via its header, in order to filter future attacks?
(Choose three)

A. Traffic Class
B. Source address
C. Flow Label
D. Hop Limit
E. Destination Address
F. Fragment Offset

Correct Answer: BCE in Dexter; ACD in TUT ?????????????????????????????

——————————————————————————————————–

@Binsiddique Congrast and so many thanks, can u answer about my question? thx

@ccnp18
This is the correct, not sure about the rest of the questions

Tunnel key – A Clear Text password that confirms the peer connection
MSS – A configure Value…. the tunnel
Keepalive – A Technology prevent…stays up
mGre – A technology that support dynamic tunnel endpoint
IPsec – An Encryption protocol

@Binsiddique

can you remember questions that wasnt in the dump?

if yes, approx how many?

thanks ;)

hi all!

jbalvin shared some dumps AND experiences on the end of page 85.

what we need to do:

1.,

if somebody ALREADY HAD AN EXAM and has lust: write the question numbers (MCQ-s, dnds as well) and write from which dump he had it (chinese, dexter, so on…)

2.,

if somebody is having EXAM IN THE NEAR FUTURE, should memorize the (new) questions and answers, write it here and we can discuss it and collect them.

thanks for the cooperation
(i’ll post this on the next page as well, sorry for that)