Share your ROUTE v2.0 Experience

@Tomcat can you please send at kokavich @ ymail com. PLEASE

hey guys,passed with 8xx mark (after 2nd attempt)

thank’s every one in this community.

in order to pass you need to study ipv6, eigrp, ospf, vrf-lite/evn, concepts and you will do more than fine to pass the exam,
i have used cbt nuggets transcender practice exam, dexters dump, Q&A’s from this forum,
i had ospf eval sim, eigrp eval sim, eigrp stub sim,
study the concepts !!!!

i wont post any question’s here that i’ve had on the exam because as i’ve mentioned all the necessary Q’s are here,

DND: AAA, Frame relay configure(posted in previous pages), dhcp (also posted in earlier pages)

now moving to TSHOOT.
best of luck to all !!!!

and thank you again for all the effort in the community.

@tomcat

May you send it to me?

k2far4me hotmail . com

@tomcat @dima
Can you please share the latest question with me at urduinfopk @gmail.com
I am going to appear for the exam tomorrow.
Regards,
Faheem

hi all!

jbalvin shared some dumps AND experiences on the end of page 85.

what we need to do:

1.,

if somebody ALREADY HAD AN EXAM and has lust: write the question numbers (MCQ-s, dnds as well) and write from which dump he had it (chinese, dexter, so on…)

2.,

if somebody is having EXAM IN THE NEAR FUTURE, should memorize the (new) questions and answers, write it here and we can discuss it and collect them.

thanks for the cooperation
(i’ll post this on the next page as well, sorry for that)

gulam
you are a moron shit

^^At least they adjusted it for the new DnD^^

For those looking for the latest question, here are the latest combined questions from this forum by, job done by some helpful guy

https://mega.nz/#!Cyx2FYhZ!cL2o1NYbmOeN8ruFNZ4SR_w7rFIaylzmHurBPAQoaDA

Shared by Jbalvin previously on page 85 ^

I failed again 779 this is was 2nd time, not all Questions here, please i want to pay for good dumps . even my sim was all correct but still get 63% for layer 3. i don’t know what is going on.
please i need help, i feel frustrated take through 1 month

@Prince
Yes it’s

@March
i SENT FOR YOU, GOOD LUCK

Please what you mean by @ Prince? (Tomcat) I need dump Qs. I paid 2 times for this website digital dot com mean 40 box and 600 box for 2 exam and still failed today most of Q. is different

@Mustafa
Sorry for that bro, I rescheduled my exam 3 times, 3 months study(I can’t lose exam fee at all)
The goot point for this new dump is all new questions is in, but some has wrong answers, so you should double check with other sources, my best advice is make sure you understanding concepts
good luck

Thanks Tomact for your advice, is there another website to buy the dumps up to date and trusted? or which source you recommend it for follow up?

if you have something please send it to spiderman underscore roof @ yahoo dot com
appreciated

@Mustafa
unfortunately I don’t have any, don’t pay too much for dumps, more dumps makes more confusing, but this site is one of the best, BTW no trusted dump is exists, trust to your knowledge, I’ll take exam in 4 days and I’ll update you

@Anonymous

0 and 65535 BGP AS numbers are reserved, is says so in official cert guide, so i will trust that.

@Mustafa
Ive collected and corrected the questions from the dumps and comments. I will create a dump after my exam this week and post it here.

Thanks @Tomcat, I wish you the best and successful and pass the exam
make sure study DnD reflexive and standard new march Qs , and pppoe client ( i was confused between auto negotiated and negotiated ) and IP SLA Q about the daigram

@Mustafa
Thanks you Mustafa

@Gangia
Thank you very much

Many Thanks @Gangia wish you the best

From digitaltut pdf:

An engineer has configured a router to use EUI-64, and was asked to document the IPv6 address of the router. The router has the following interface parameters:

mac address C601.420F.0007
subnet 2001:DB8:0:1::/64

Which IPv6 addresses should the engineer add to the documentation?
A. 2001:DB8:0:1:C601:42FF:FE0F:7
B. 2001:DB8:0:1:FFFF:C601:420F:7
C. 2001:DB8:0:1:FE80:C601:420F:7
D. 2001:DB8:0:1:C601:42FE:800F:7

It states that correcr answer is A, but in reality there’s no correct answer, the 7-th bit of the MAC-address should be flipped and it should be look like: C501:42FF:FE0F:7

@Alex
Please don’t make more confusing to the people, it’s might be just typing mistake, the concept for EUI-64 is push FFFE between the veodir OID aod the NIC-specific part if the MAC address.

Tomcat….can you send me the latest {email not allowed}

Tomcat, can you send me the latest dump j$$onny$$v$100$$@$$yahoo$$$com

@Tomcat
do you have the updated dump from previous link or anothers?

this is my mail if you have another one
andykica1 @ hotmail . com

Tomcat, can you please send me the latest dump?
ccnpdump ‘at’ protonmail ‘dot’ com

IANA has reserved, for Private Use, a contiguous block of 1023 Autonomous System numbers from the “16-bit Autonomous System Numbers” registry, namely 64512 – 65534 inclusive.

The official Cert Guide tells the same.

https://tools.ietf.org/html/rfc6996#section-5

Mustafa:

can you remember some questions?
if yes, can you copy them from the dump, maybe we can chech them for you.

12.12.12.0 (90/30720) via 52.52.52.2
(90/30720) via 51,51,51,1

which option ensures that routeres from 51.51.51.1 are preferred over router 52.52.52.2

A.distance 90 51.51.51.1 0.0.0.0
B.distance 89 52.52.52.2 0.0.0.0
C.distance 90 52.52.52.2 0.0.0.0
D.administrative distance 91 51.51.51.1 0.0.0.0
E.distance 89 51.51.51.1 0.0.0

????

@Alex
it’s the only answer with FFFE added to the mac

Hi guys
Any one have ltest Dumps CCNP ROUTE 300-101
plz share link

@CCNP New question & @Tomcat Do you have vce file for practice from pdf u share? pls share to me if you have thx

Please share news about exam CCNP Route. Thank.

@Tomcat
Thanks received…

dump plz

@tomcat

Do you help me, plz i will take Exam in tomorow

Dear all,

Where can i get the update information and status for CCNP Datacenter?

Thanks,

All i have, just collected on internet and some comment on here, but Tomcat is right: “no trusted dump is exists, trust to your knowledge”. Thank all and Good luck!
https://drive.google.com/open?id=1Z02tlmeZi-7yKv1N5VmfQcN8q3Z3biVG

@rrr
There was a new DnD which is belong to authentication it is new question, you can’t find it in digital.com it is new Q., I haven’t dump to show you i just the Q of this website (digitaltut).
and about the Q, of @new question you are I got the Q in the Exam
12.12.12.0 (90/30720) via 52.52.52.2
(90/30720) via 51,51,51,1

which option ensures that routeres from 51.51.51.1 are preferred over router 52.52.52.2

A.distance 90 51.51.51.1 0.0.0.0
B.distance 89 52.52.52.2 0.0.0.0
C.distance 90 52.52.52.2 0.0.0.0
D.administrative distance 91 51.51.51.1 0.0.0.0
E.distance 89 51.51.51.1 0.0.0

and I answered E ( I used my Knowledge maybe I am wrong )

Your answer was correct. The default administrative distance for EIGRP routes is 90 so adjusting a route for 89 will make it the preferred route.

Dear @Gangia
I used to for first option (89) but i am not sure about the IP address maybe is 52.52.52.2 for that reason I am still confused

Dear @Gangia
I used to for first option (89) but i am not sure about the IP address maybe is 52.52.52.2 for that reason I am still confused

Hi All

Can you please share the latest dumps with me at athiraajeeth93 at gmail.com

Kindly help me . please….

@Mustafa
Its E because you are trying to make 51.51.51.1 preferred over 52.52.52.2. distance 89 51.51.51.1 0.0.0.0 will make this happen.

I passed the Exam 93x today thanks to all forums users and to digitaltut, a lot of question was present on new dump:

new dumps
https://www.dropbox.com/s/b7mzl82ihy0v214/300-101%20%281%29.pdf?dl=0

forum comments
https://mega.nz/#!Cyx2FYhZ!cL2o1NYbmOeN8ruFNZ4SR_w7rFIaylzmHurBPAQoaDA

DND
1. DHCP Relay information (more or less like this)

ip dhcp relay information option –> add suboption and the remote ID suboption
ip dhcp relay information check –> Verify relay information option (in forwarded BOOTREPLY)
ip dhcp relay information policy …… –> Define reforwarding rules (for a DHCP relay agent)
ip dhcp relay information subscriber-id –> enable a service provider to add a unique ID
ip dhcp relay information –> configured in global configuration mode applies to all interfaces

2. DND – GRE feature (Q263 DND From new dump)

3. DND adverse network conditions ,Latency Starvation… (Q400 DND From new dump)

4. DND aaa authorization (Q444 DND From new dump)

5. DND Frame Relay LMI (Q473 DND From new dump)
————————————-
LAB
Eigrp Eval sim
Eigrp Stub
PBR sim

———–

a diagram of bgp config between 3 routers R1-R2-R3, which showed the config on R2, the question was what command is missing.- they were trying to make adj between the routers on the loopback address.
a. update source X — this is what I chosen.
b. ebpg-multihope 1
c. load balancing something.
d. no synchronize

————-

Q.A network engineer has set up VRF-Lite on two routers where all the interfaces are in the same VRF. At later time, a new loopback is added to Router 1, but it cannot ping any of the existing interfaces. Which two configurations enable the local or remote router to ping the loopback from any existing interface? (Choose two.)
A. adding a static route for the VRF that points to the global route table
B. adding the loopback to the VRF
C. adding dynamic routing between the two routers and advertising the loopback
D. adding the IP address of the loopback to the export route targets for the VRF
E. adding a static route for the VRF that points to the loopback interface
F. adding all interfaces to the global and VRF routing tables
Correct Answer: AB

—————

Q.What is the reasons of command: (question like this with public community)
router(config)#snmp-server host 192.168.1.3 traps version 2c CISCORO
A. For network system to management server
B. allow 192.168.1.3 only
…
My Answer: A

——————–

Q- what does the command show ip vrf purple TOPOLOGY shows:
A. shows the feasible successors for a specific route table
My Answer: A

—————–

Q.the command show ip flow export shows:
A. sent states and statistics
B. local states and statistics
…
My Answer: B
—————————-
Q with exhibit like q129/q130 (new dump)
Which iptio preveots riutog updates frim beiog seot ti the DHCP riuter, while stll alliwiog
riutog update messages ti fiw ti the Ioteroet riuter aod the distributio switches?

A. core(config)# access-list … deny
core(config)# access-list … permit
core(config-router)# distribute-list .. out
My Answer: A

—————–

The Neighbor Discovery Protocol in ipv6 is replaced with which discovery protocol in ipv4?
A. ARP
B. ICMP
C. UDP
D. TCP
My Answer: A

————————

Q: Windows Server Syslog blocked by ACL and….
A.port UDP 514
Answer:A

I passed the Exam 93x today thanks to all forums users and to digitaltut, a lot of question was present on new dump:

DND
1. DHCP Relay information (more or less like this)

ip dhcp relay information option –> add suboption and the remote ID suboption
ip dhcp relay information check –> Verify relay information option (in forwarded BOOTREPLY)
ip dhcp relay information policy …… –> Define reforwarding rules (for a DHCP relay agent)
ip dhcp relay information subscriber-id –> enable a service provider to add a unique ID
ip dhcp relay information –> configured in global configuration mode applies to all interfaces

2. DND – GRE feature (Q263 DND From new dump)

3. DND adverse network conditions ,Latency Starvation… (Q400 DND From new dump)

4. DND aaa authorization (Q444 DND From new dump)

5. DND Frame Relay LMI (Q473 DND From new dump)
————————————-
LAB
Eigrp Eval sim
Eigrp Stub
PBR sim

———–

a diagram of bgp config between 3 routers R1-R2-R3, which showed the config on R2, the question was what command is missing.- they were trying to make adj between the routers on the loopback address.
a. update source X — this is what I chosen.
b. ebpg-multihope 1
c. load balancing something.
d. no synchronize

————-

Q.A network engineer has set up VRF-Lite on two routers where all the interfaces are in the same VRF. At later time, a new loopback is added to Router 1, but it cannot ping any of the existing interfaces. Which two configurations enable the local or remote router to ping the loopback from any existing interface? (Choose two.)
A. adding a static route for the VRF that points to the global route table
B. adding the loopback to the VRF
C. adding dynamic routing between the two routers and advertising the loopback
D. adding the IP address of the loopback to the export route targets for the VRF
E. adding a static route for the VRF that points to the loopback interface
F. adding all interfaces to the global and VRF routing tables
Correct Answer: AB

—————

Q.What is the reasons of command: (question like this with public community)
router(config)#snmp-server host 192.168.1.3 traps version 2c CISCORO
A. For network system to management server
B. allow 192.168.1.3 only
…
My Answer: A

——————–

Q- what does the command show ip vrf purple TOPOLOGY shows:
A. shows the feasible successors for a specific route table
My Answer: A

—————–

Q.the command show ip flow export shows:
A. sent states and statistics
B. local states and statistics
…
My Answer: B
—————————-
Q with exhibit like q129/q130 (new dump)
Which iptio preveots riutog updates frim beiog seot ti the DHCP riuter, while stll alliwiog
riutog update messages ti fiw ti the Ioteroet riuter aod the distributio switches?

A. core(config)# access-list … deny
core(config)# access-list … permit
core(config-router)# distribute-list .. out
My Answer: A

—————–

The Neighbor Discovery Protocol in ipv6 is replaced with which discovery protocol in ipv4?
A. ARP
B. ICMP
C. UDP
D. TCP
My Answer: A

————————

Q: Windows Server Syslog blocked by ACL and….
A.port UDP 514
Answer:A

————

——————-

From new dump

58 C (as dump)
115 ABC (as dump)
157 CE (as dump)
163 ABD (as dump)
182 BC (as dump)
186 AC (my answers)
187 AE (my answers)
192 BC (as dump)
219 ABG (as dump)
241 AE (as dump, maybe Single choice that ask about VLAND id 8021q on EVN – virtual network tag)
261 AD (as dump)
266 CD (as dump)
388 B (as dump)
407 C (as dump)
411 AB (as dump)
434 AD (as dump)
445 D (as dump)
452 C (my answer, and my choose was FIB+Adjacency table :-D)
457 D (my answer)
461 A (as dump)
462 AB (as dump)
463 B (as dump)
464 D (as dump)
465 BF (my answers)
466 C (as dump)
467 D (my answer)
468 DE + 1 choose not present in dump with a long phrase with 1:N traslation (my answers)
469 CD (as dump)
470 B (as dump)
471 BD (as dump)
472 A (as dump)
474 D (as dump)
475 ADE (as dump)
476 B (as dump)
477 c (my answer)

Thanks to all!!

Hi @EIGRP Stub_Passed, which dump did u used to study?
Thanks