Share your ROUTE v2.0 Experience

@Confuse guy

No need to thank bro I’m here to help ..

Can I explain to you a small point .. When Cisco said “which will point to adjacency”
they mean as a “Pointer”, which is a kind of (reference).

* A pointer is a programming language object, whose value refers to (or “points to”) another
value ((stored elsewhere)) in the memory using its memory address.

* A pointer references a location in memory, and obtaining the value ((stored at that location)) is
known as dereferencing the pointer.

* The (FIB) contains a ((pointer for the adjacency)) corresponding to the next hop interface for
specific path.

I hope this explanation is useful ..

@ISAKMP
I think the correct answer is FIB, adjacency table

FIB is used Layer 3 and the adjacency table is used for Layer 2. CEF uses both to forward traffic.

Nodes in the network are said to be adjacent if they can reach each other with a single hop across a link layer. In addition to the FIB, CEF uses adjacency tables to prepend Layer 2 addressing information. The adjacency table maintains Layer 2 next-hop addresses for all FIB entries.

https://www.cisco.com/c/en/us/td/docs/ios/12_2/switch/configuration/guide/fswtch_c/xcfcef.html#wp1000922

@Router @Confuse guy

Take a look at this link and you will understand everything ..

https://www.cisco.com/c/en/us/support/docs/ip/express-forwarding-cef/13706-20.html#express

@ISAKMP

damn man!! Thanks now I see what you mean.

@Router

Ooh, that’s what I’m trying to tell you .. LMAO

@ISAKMP

https://www.cisco.com/c/en/us/support/docs/ip/express-forwarding-cef/13706-20.html#express
“The next packet the router receives destined for 10.1.1.50 is switched through this new adjacency.”

Well I thought this only apply to fast-switching where it require 1st packet prior to registering the path into the table?

thank sir Craig McBean

where is the comment here?

can anyone please send me links for these – Dokodo, Chinese and Dexter
r a h 2 0 0 1 a t r e d i f f m a i l d o t c o m

@next_try, with which VCE player version can I open your dump? I use 1.1.2, but it can not be open.

So ISAKMP
the final answer is B???

Which cisco Express Forwarding component(s) contain forwarding information? (forwarding information, they changed it)
A. FIB, adjacency table
B. adjacency table.
C. FIB, RIB , Adjanceny table
D. FIB
E. RIB
Correct Answer: B

QUESTION 94
Which two configurations can a PPPoE client support?Choose two
A. Eight clients are configured on a single CPE.
B. The client is connected to multiple hosts over DMVPN
C. The client is installed on the same network device as the server
D. The client is connecting over an ATM PVC
E. The client is installed on a native IPv6 network.
Answer: ???????

Hi All,

PLEEEAAASSSE help

Hi digitaltut,

im one of your premium members.I have a very confusing situation if you could help please,i have my exam booked for tomorrow.

Im struggling to understand the EIGRP Redis Lab.

Digital have presented two scenarios,one wiht serial and another with fast ether link between router 2 and router 3.

The confusion is show command you are displaying.

In one scenario,its the interface in the OSPF domain towards r4 from where you are gathering the BW Delay and MTU stats
and the serial interface between r2 and r4 is also used for the BW and DElay stats.

In contrast,another scenario when the link between the r2 and r3 is fasthethernet,you are using the show interface for the fast Ethernet link between r2 and r3 and not sticking to the original interfaces you used in the first scenario.

How do i know why you have used two different interfaces for two different cases.

In case 1 and case 2,both the interfaces should be the ones used in the ospf domains?

In case 1 you are using OSPF facing interfaces for EIGRP metric where as in case 2 you are using the EIGRP facing interfaces to get the stats.please explain.

@sw its A and B

Hi Guys, I’m having trouble finding the new DHCP D&D can someone help me? Thanks in advance

Hi Guys,

I’m studying Route Exam.But I have no dumps.Someone can send me actual dumps?

Ty all.kutayulubas at gmail dot com.

It’s only a draft of possible DHCP DND I hope someone did the exam can correct it:

DND DHCP

DHCP >there was a new one Perform this task to enable an ISP to add a unique id,and assign specific actions (for example, assignment of host IPaddress,subnet mask, and domain name system DNS), and to trigger accounting.
ip dhcp relay information check —–> Validate relay information in BOOTREPLY (global configuration command) If an invalid message is received, the relay agent drops it
ip dhcp relay information policy {drop | keep | replace} —-> Define forwarding rules
ip dhcp relay information Trust-all —> Trust-all Received DHCP packets may contain realy info option with zero giaddr

ip dhcp relay global interface – not remember
ip dhcp relay information option – Insert relay information in BOOTREQUEST
show ip dhcp relay information trusted-sources — ??

DND DHCP

DHCP

– ip dhcp relay information option subscriber-id — Perform this task to enable an ISP to add a unique id,and assign specific actions (for example, assignment of host IPaddress,subnet mask, and domain name system DNS), and to trigger accounting.

– ip dhcp relay information check —–> Validate relay information in BOOTREPLY (global configuration command) If an invalid message is received, the relay agent drops it

– ip dhcp relay information policy {drop | keep | replace} —-> Define forwarding rules

– ip dhcp relay information Trust-all —> Trust-all Received DHCP packets may contain realy info option with zero giaddr

– ip dhcp relay global interface – not remember

– ip dhcp relay information option – Insert relay information in BOOTREQUEST

– show ip dhcp relay information trusted-sources — ??

@asdf : Iam using VCE Player 1.1.2
… I hate this D&D questions…. not sure how I will get this into my brain ?!?! :(

Two limitations when use NPTv6 for IPV6 to IPV6 Address translation?
A.
stateful address translation
B.
a limit of 32 1-to-1 translations
C.
lack of overloading functionality
D.
identify all interfaceas NAT inside or outside
E.
1-to-1 prefix rewrite
F.
mismatched prefix allocations
Answer: ???????????

=================

QUESTION 47
When use NPTv6 for IPV6 to IPV6 Address translation? (Choose two)
A.
stateful address translation
B.
a limit of 32 1-to-1 translations
C.
lack of overloading functionality
D.
identify all interface NAT inside or outside
E.
one-to-one prefix rewrite
F.
mismatched prefix allocations
Answer: ?????????

@ CCNP fail fail fail :
regarding your questions : and pease anyone correct me if Iam wrong !!! …

Question 1 : if we have only this output we need to choose A, because that is the next hop !
Network Next Hop Metric LocPrf Weight Path
*>i 172.17.1.0/24 10.0.0.1 0 0 0 32768 i

Question 6 : Answer C because of the “376”
#~192.168.13.57 192.168.1.111 3 32 128 376 7.9 11.18 3.6

Question 7 :
It depends on the drawing output !
But yes one answer is AC the other one is CE !

Question 8 : Yes I would also choose C in this case !

@SW: I know the answer but it would be great if someone could explain why we use it !

which neighbor protocol will eliminate( replace not sure phrase) ipv6 to ipv4

A: CDP
B: ICMP
C: MAC
D: ….

answer : A?????????

Hello Guys

Please Share valid dump
I have to pass the 300-101 exam because I need a job
my mail is nneettwwoorrkkiinngg @ gmail.com

Hello guys, can anyone tell me where can I find labs for route certification, thank you.

I found those two questions recently posted as newly added to the exam and I have checked the syntax for SNMP:

Q. trap Snmp 2c 10 and then something
question was- what does that 10 means?
a. ACL that is applied
b. community string
c. It would be public (Don’t remember exactly)
Answer: B

if the command start with:
snmp-server HOST …trap/inform… – community-string

syntax (no access list in it):
snmp-server host host-addr [traps | informs] [version {1 | 2c | 3 [auth | noauth | priv]}] community-string [udp-port port] [notification-type]

Q.SNMP-server user abcd access 16… Questions was, what does 16 value means?
a. ACL that is applied
b. community string
c. It would be public (Don’t remember exactly)
d. ??
Answer:A

if the command start with:
=snmp-server GROUP – ACL
=snmp-server USER – ACL
=snmp-server COMMUNITY – ACL (in the end of the command)
(snmp-server community ‘community_string’ RO/RW ‘access list’)

syntax for snmp-server group:
snmp-server group group-name { v1 | v2c | v3 { auth | noauth | priv } } [ context context-name ] [ read read-view ] [ write write-view ] [ notify notify-view ] [ access [ ipv6 named-access-list ] [ acl-number | acl-name ] ]

syntax for snmp-server user:
snmp-server user username group-name [ remote host [ udp-port port ] [ vrf vrf-name ] ] { v1 | v2c | v3 [encrypted] [ auth { md5 | sha } auth-password ] } [ access [ ipv6 nacl ] [ priv { des | 3des | aes { 128 | 192 | 256 } } privpassword ] { acl-number | acl-name } ]

Hope this helps to bring some light.

i don’t understand the state of the exam. is there a someone that can give REAL feedback about the exam and dump ?

please stop spam there. people find your sites by googling ccnp route…. stop SPAM THERE.

@Waz

Correct, this is the final answer for sure ..

@next_try

What question you are talking about? I can help ..

@EIGRP Stub

Thank you!

@Timmy666

Well done .. thank you for your effort.

Which cisco Express Forwarding component(s) contain forwarding information? (forwarding information, they changed it)
A. FIB, adjacency table
B. adjacency table.
C. FIB, RIB , Adjanceny table
D. FIB
E. RIB
Correct Answer: D

if the question changes and only is requesting information about the component that contain forwarding information the answerd will be D

take into account the following:

The Forwarding Information Base (FIB) table – CEF uses a FIB to make IP destination prefix-based switching decisions. The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and these changes are reflected in the FIB. The FIB maintains next-hop address information based on the information in the IP routing table.

Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with switching paths such as fast switching and optimum switching.

Adjacency table – Nodes in the network are said to be adjacent if they can reach each other with a single hop across a link layer. In addition to the FIB, CEF uses adjacency tables to prepend Layer 2 addressing information. The adjacency table maintains Layer 2 next-hop addresses for all FIB entries.

regarding:
what are two rules for compacting IPV6 address?
A. every 16-bits segment that consists of all zeroes can be represent with a single 0
B. the trailling zeores in any 16-bit segment do not have to be written
C. the leading zeroes in any 16-bi segment do no have to be written
D. any single, continuos string of one mor 16-bits segment that consists of all zeroes can be represet with
a double ::
E. the maximun number of time a double colon can replace a 16-bit segment that cosists of all zeroes is
two
F. two zeroes in the middle of any 16-bit segme do not have to be written

answer:CD

Please take into account the following:

Two colons (::) can be used only once in an IPv6 address to represent the longest successive hexadecimal fields of zeros. The hexadecimal letters in IPv6 addresses are not case-sensitive.

Table 1 Compressed IPv6 Address Formats
IPv6 Address Type

Preferred Format compressed Format

Unicast 2001:0:0:0:DB8:800:200C:417A 2001::DB8:800:200C:417A
Multicast FF01:0:0:0:0:0:0:101 FF01::101
Loopback 0:0:0:0:0:0:0:1 ::1
Unspecified 0:0:0:0:0:0:0:0 ::

The loopback address listed in the table above may be used by a node to send an IPv6 packet to itself. The loopback address in IPv6 functions the same as the loopback address in IPv4 (127.0.0.1).

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipv6_basic/configuration/xe-3s/ip6b-xe-3s-book/ip6-add-basic-conn-xe.html

@ccnp83

If you want to redistribute OSPF into EIGRP, you have always to use the interface sitting in the OSPF domain. This is because we want to convert the metric into EIGRP format

Not sure if I understand your Q though

what are two rules for compacting IPV6 address?
A. every 16-bits segment that consists of all zeroes can be represent with a single 0
B. the trailling zeores in any 16-bit segment do not have to be written
C. the leading zeroes in any 16-bi segment do no have to be written
D. any single, continuos string of one mor 16-bits segment that consists of all zeroes can be represet with
a double ::
E. the maximun number of time a double colon can replace a 16-bit segment that cosists of all zeroes is
two
F. two zeroes in the middle of any 16-bit segme do not have to be written

solution:

c-d

Two colons (::) can be used only once in an IPv6 address to represent the longest successive hexadecimal fields of zeros. The hexadecimal letters in IPv6 addresses are not case-sensitive.

Table 1 Compressed IPv6 Address Formats
IPv6 Address Type

Preferred Format Compressed Format

Unicast 2001:0:0:0:DB8:800:200C:417A 2001::DB8:800:200C:417A

Multicast FF01:0:0:0:0:0:0:101 FF01::101

Loopback 0:0:0:0:0:0:0:1 ::1

Unspecified 0:0:0:0:0:0:0:0 ::

to add on the ISAKMP statement.

https://learningnetwork.cisco.com/thread/39158

Please refer to the pic posted by Jonny7_2002, whereas FIB contains adjacency pointer

@jbalvin for me A is definitely correct though

@confuse guy Yes you rigth also I think the same but if the question change as trick maybe is only asking about specific forwarding information. ok we don’t know. but I will select A. tips: read carefully the question maybe the paraphrase change.

@ Everyone
Is there any new information on the AAA DND?

Other than a working EIGRP configuration, which option must be the same on all routers for EIGRP authentication key role over to work correctly?

A. SMTP
B. SNMP
C. Passwords
D. Time

Some say C. Some say D. Help!!

thank you @next_try for reply and clarification

@jbalvin I will choose A and C.

D can be applied once, not ‘Any’

Two aspects of an IP SLA operation can be tracked: state and reachability. Which statement about state
tracking is true?
A. When tracking state, an OK return code means that the track’s state is up; any other return code
means that the track’s state is down.
B. When tracking state, an OK or over threshold return code means that the track’s state is up; any other
return code means that the track’s state is down
C. When tracking state, an OK return code means that the track’s state is down; any other return code
means that the track’s state is up.
D. When tracking state, an OK or over threshold return code means that the track’s state is down; any
other return code means that the track’s state is up.

Hi guys, I also need help regarding this Q
Is it A or B? Thanks

Thank you, Timmy666!

Hi guys,
which dumps are valid and can somebody pass it to me please.

@D&D, the correct answer is for sure A —> “when tracking state, an OK return code means that the track’s state is up; any other return code means that the track’s state is down”

https://www.cisco.com/c/en/us/td/docs/ios/ipsla/command/reference/sla_book/sla_05.html

Tracking: STATE

Return Code “OK” means –> Track State Up
all other return codes mean –> Track State Down

Tracking: REACHABILITY

Return Code “OK or over threshold” –> Track State Up
all other return codes mean –> Track State Down

@CCNP Fail
Because of “working EIGRP” correct answer is D(time), when on router changing password the other with different time not changing

https://www.cisco.com/c/en/us/support/docs/ip/enhanced-interior-gateway-routing-protocol-eigrp/82110-eigrp-authentication.html

@Asdf
Thank you! I got confused by the “IP SLA operation can be tracked: state and reachability.”
It is all clear now! Have a great day ahead

@CCNP
Key chine not password