Share your ROUTE v2.0 Experience

Thank you, Zerome!

Neighbor Discovery — or ND — is the protocol used by IPv6 to determine neighbouring hosts, and will replace ARP which was used in IPv4. It will perform similar tasks of the Address Resolution Protocol (ARP)

So ARP 100%

Thank you, Zerome!

I’m going in, just a few more hours…. I’m so nervous.

@Sims Be confident. Waiting for ur result and plz mention the dump u used and any new question if any.

Hi my name is Anus. I need dumps

keep us posted Sims, and thank you for help so far. good luck!

@Confuse guy – you can’t populate your ARP table withouth ICMP request. If only given one choice, I’d go with ICMP.

The labs will be the same with different names for routers. New questions have been added.

@zerome I had that same question, but I answered ARP.

@sims, I get your logic about ARP table population, but ICMP wasn’t replaced by NDP. Arp was replaced by NDP.

Pass the 300-101 today with a score 870. I’m from Brazil. 50%-60% of dumps, some questions rebuilt, some new questions (Protocols numbers and Frame Relay). Labs em Evaluations same as dumps.

@ DRC007
Congrats!!!

do anyone remember frame relay configuration DND
please post if you can..

When the exam gets changed periodically, do they change by much or does most of the questions remain the same?

@ Gangia

The overhaul the exam every few years but mostly you will get a similar pull of questions.

lots of new questions…only had eigrp stub and eig & ospf eva sims…had 4 Drag n drops..2 were completely new meaning they werent there in the last months dumps..most of the questions were new…so be careful..

@Waz
Here is an example

interface Serial0
no ip address
Blank Space <- Drag from options "encapsulation frame-relay IETF"

interface Serial0.1 point-to-point
ip address x.x.x.138 255.255.255.252
Blank Space <- Drag from option "frame-relay interface-dlci 80 IETF"

This is Sims on my phone. Passed I can give more information when I get home tonight.

All questions are covered her. Nothing surprised me on the exam. Know the content though, most of the questions are just worded different.

I had EIGRP simlet. And the pbr and EIGRP stub lab.

I did get a crazy ass dhcp DnD. With the subscriber ID etc.

@Sims
Arp is replaced.
Here is nice explanation NDP
https://keepingitclassless.net/2011/10/neighbor-solicitation-ipv6s-replacement-for-arp/

Can someone that passed exam try to reorder these?

Q: logging console 7. what is the effect of applying this command only without other logging command ?
A. you can see debug if you’re connected in SSH
B. High CPU utilization
C. log will show on active console connection only
…
Answer C

Q: NTP Stratum (choose two correct)
A. highest valid NTP stratrum level is 16
B. stratrum 1 directly connect to authoritative server
C. stratrum 0 directly connect to authoritative server
D. stratrum 15 invalid ntp
E stratrum 2 receives its time through NTP from a stratum 1 time server
Answer B E

Q. What is the minimum log level for the event generated when an ACL drops a packet?
A. 4
B. 5
C. 3
D. 7
E. 6

Answer: E

Q address ref clock st when poll reach delay offset disp
~172.31.32.2 172.31.32.1 5 29 1024 377 4.2 -8.59 1.6
+~192.168.13.33 192.168.1.111 3 69 128 377 4.1 3.48 2.3
#~192.168.13.57 192.168.1.111 3 32 128 377 7.9 11.18 3.6
* master (synced), # master (unsynced), + selected, – candidate, ~ configured
Q. Which of the following is true
A. Master is syncing and exchanging NTP packets successfully
B. Master is not syncing but exchanging NTP packets successfully
C. Master is not syncing and not exchanging NTP packets
Answer B

Q. Which next hop is going to be used for 172.17.1.0/24 (Is it the right question?)
Router(config-if)#do show ip bgp
BGP table version is 4, local router ID is 156.12.1.6
Status codes: s suppressed, d damped, h history, * valid, > best, i – internal,
r RIB-failure, S Stale Origin codes: i – IGP, e – EGP, ? – incomplete
Network Next Hop Metric LocPrf Weight Path
*>i 10.1.1.0/24 192.168.1.2 0 0 0 10000 i
*>i 10.2.2.0/24 192.168.3.2 0 0 0 10000 i
>i 172.17.1.0/24 10.0.0.1 0 0 0 32768 i
?? 10.0.0.2 ??

A. 10.0.0.1
B. 192.168.1.2
C. 10.0.0.2
D. 192.168.3.2
Answer A

Q: Windows Server Syslog blocked by ACL and….
A.port UDP 514
B.portTCP 514
C.portUDP 513
D.port TCP 513
Answer:A

Q. Where to configure the DHCPv6 relay IP address for a VLAN
Do you have to enable DHCPv6 relay in the global configuration mode/VLAN interface ???
Do you have to configure something on the VLAN interface/global configuration???
Answer??

Q. which statement is true convering 6to4 tunneling?

A. IPV4 traffic is encapsulated with an IPV6 header
B. the edge router can use locally configured IPV6 address
C. host and routers inside a 6to4 site will need a special code
D. an edge router must use IPV6 address of 2002::/16 in its prefix

Resp: D

The Neighbor Discovery Protocol in ipv6 is replaced with which discovery protocol in ipv4? (Choose One)
A. ARP
B. ICMP
C. UDP
D. TCP
E. RFC
Answer: A

Q. another diagram that I have been thinking about was between 2 routers and they had a eigrp protocol running between- the question was that they can ping between them with no problem but when they are trying through the vrf connection it doesn’t work, what’s wrong? which command to put on both routers to make it work ?

A rd 1:100 both
‎b. Network with a 255.255.240.0
‎c. autonomous-system 100 – that’s what I chosen
‎d. Don’t remember
Answer: A??

Q.SNMP-server user abcd access 16… Questions was, what does 16 value means?
a. ACL that is applied
b. community string
c. It would be public (Don’t remember exactly)
d. ??
Answer:A
https://www.cisco.com/c/en/us/td/docs/ios/ipv6/command/reference/ipv6_book/ipv6_17.pdf
snmp-server user username group-name [remote host [udp-port port] [vrf vrf-name]]
{v1 | v2c | v3 [encrypted] [auth {md5 | sha} auth-password]} [access [ipv6 nacl]
[priv {des | 3des | aes {128 | 192 |256}} privpassword] {acl-number | acl-name}]

Sims what d*mps cover would u say?

And also this
Refer to the exhibit.(see q127/q128 from dexter) Which option prevents routing updates from being sent to the DHCP router, while allowing other to access on Internet?
[Access list version]
A
B
C
D
Answer:

about dhcp drag and drop subscriber id was like this?
about DND DHCP Relay Information:

Option subscriber-id – used by ISP to add a unique identifier and to assign specific actions (host IPaddress,subnet mask, and domain name system DNS), and to trigger accounting. ????

That’s it. Those weren’t the options though. I’d study those topics. I used China, dexter and doko. Cover all, learn the information not just the answers and you’ll do fine.

All the DnD are covered here.

1. EIGRP redistribute to OSPF without metric parameter (redistribute eigrp 100) –> what happend
2. EIGRP redistribute to OSPF area 0 –> learn OSPF Type (E2 or N2)
3. Missing Route-Target –> vrf yellow question
4. Distance 89 10.0.0.0 –> selecting path in eigrp
5. Best Route for BGP *>
6. R1—————————-R2——————————R3
23.23.23.23 12.12.12.12 11.11.11.11
R3 is configured as eigrp stub. What will the show ip route be on R1 look like?
7. Choise of EGRIP stub option :
a. Summary
b. xxxxxxxx
c. Receive-only
8. How to config DHCP relay in VLAN,
9. How to minimize Unicast flooding?
A. By decreasing the ARP time compared to CAM table time
10. Calculate OSPF Cost from External routing distribution
11. EVN :
a. Vrf-lite –> this I choose
b. MPLS
c. L2VPN
d. Xxxxx
12. Logging console 7 without logging
13. router(config)#service timestamps log datetime msec –> means
14. Show IP Flow export –> show status and satistic

DnD
1. Frame-Relay Multipoint Subinterface
2. AAA Authentication

10.0.0.0 –> selecting path in eigrp
5. Best Route for BGP *>

What is the next path in the case of no * and/or > towards the segment

Alright guys – passed with 8xx. Used Dokodo, Chinese and Dexter. Most importantly I studied for over two months before even looking at dumps.

I had 5 DnD.
DND:
Authentication, Accounting and Authorization.
GRE – IPsec, keepalive, mgre, mss, tunnel key
Frame Relay – Dlci, fcn, lmi, pvc and svc
assymetric routing, out of order packet, tcp starvation, latency
The New DHCP DnD

Only 1 Eval Simlet: EIGRP Eval

I had two Sims: Policy Based Routing and EIGRP Stub

Some Q’s I remember having. I added some notes to them.

Pay attention, MANY of the questions we’ve compiled on here are on the exam but they’re formatted or phrased different. So just research the questions.

The Neighbor Discovery Protocol in ipv6 is replaced with which discovery protocol in ipv4?
A. ARP
B. ICMP
C. UDP
D. TCP
E. RFC
Correct Answer: A

Which two protocols can cause TCP starvation? (Choose two)
A. TFTP
B. SNMP
C. SMTP
D. HTTPS
E. FTP
Correct Answer: AB

What is the default value of TCP maximum segment size?
A. 536
B. 1492
C. 1500
D. 1508
Correct Answer: A

Frame Relay LMI autosense. Which statements are true? (Choose two.)
!!!!!The choices were a little different.
A. Line should be up and protocol should be down
B. Protocol must be up
C. It only works on DTEs
D. It only works on DCEs
Correct Answer: AC

What configurations does PPPoE allow? (Choose two)
A. Client can be installed on the same network devices as server
B. 8 clients can be configured on 1 CPE
C. Clients can connect to multiple hosts over DMVPN
D. Client connecting over ATM PVC
E. Client installed on native IPv6 network
Correct Answer: BC

In which two ways can split horizon issues be overcome in a Frame Relay network environment? (choose two.)
A. Configuring one physical serial interface with Frame Relay to various remote sites.
B. Configure a loopback interface with Frame Relay to various remote sites
C. Configuring multiple subinterfaces on a single physical interface to various remote sites.
D. Enabling split horizon.
E. Disabling split horizon.
Correct Answer: CE

A network engineer enables OSPF on a Frame Relay WAN connection to various remote sites, but no OSPF
adjacencies come up.
Which two actions are possible solutions for this issue? (Choose Two)
A. Change the network type to point-to-multipoint under WAN interface.
B. Enable virtual links.
C. Change the network type to nonbroadcast multipoint access.
D. Configure the neighbor command under OSPF process for each remote site.
E. Ensure that the OSPF process number matches among all remote sites
Correct Answer: AD

In a point-to-multipoint Frame Relay topology, which two methods ensure that all routing updates are received
!!! one of the options was enable split horizon. So pay attention.
by all EIGRP routers within the Frame Relay network? (Choose Two)
A. Use statically defined EIGRP neighbors on the hub site.
B. Create separate address families.
C. Disable split horizon.
D. Use subinterfaces.
E. Disable EIGRP auto summary.
Correct Answer: CD

Actually – study this document really well. Almost all of these were on my exam.

https://anonfile.com/u9deIdd9bb/quiz.txt

@ nick….there are 3 next-hop path…the best path will be *>

Congrats @Sims aka Confused

Thanks to everyone on here for their contributions… off to TSHOOT

@ Sims
TShoot was a breeze, learn the network and the tickets. The first thing i did was to go into the PC an type ipconfig if I received an ip i proceeded to ping R1 down to ASW. Where the ping stops is most likely the problem. For example is you cannot ping R1 it’s one of three issue. You will learn the problems for each device and troubleshoot from there.

@ sims
Can you elaborate any on the AAA DND?

QUESTION 3
Frame Relay LMI autosense. Which statements are true? (Choose two.)
A. Line should be up and protocol should be down
B. Protocol must be up
C. It only works on DTEs
D. It only works on DCEs
Correct Answer: AC
Section: 2.0 Layer 2 Technologies

For this question, if i remember my exam…
A. Line must be up and protocole must be si en
B. Line must be up
C.its only works on DTE
D.its only world on DCE

It is not really the same… i choose BC

Sorry…
A. Line must be up and protocol must be up

anyone has latest dumps of CCNP Route, i need it , i am preparing for the exam.

Kindly send CCPP Route dumps to …

alihamid734 gmail com

Congrats Sims and thanks for the headups

@Anonymous thanks very much appreciated

hello friends.can you send me new dumps ? artur. {email not allowed}

artur . mrdoyan gmail.com

Just a reminder if anyone have got below question in the exam
It had Satax# as the hostname of the router
Do any one know question and answer for this ? ?
It was similar like this
A.Satax#
B.Satax#
C.Satax#
D.Satax#
E.Satax#

Kindly send 300-101 me dumps at :

alihamid734 gmail com

Hi Guys, just created a vce file, with posted questions here, but not sure all the answers .
Is someone from you able to double check the file and correct it if needed ?
Please let me know then I’ll forward it to you, so once we have corrected it we can share it to all others !

@next_try nice job bro. hope u can find someone.

@ next_try
Good job! share it here as VCE_temp and we’ll all verify. It’s good to share suggestions/answers from multiple sources as sometimes questions might be tricky.

@next_try can you please share the link here, as i am planning to give the exam next week

many regards

Does anyone know if actual testkings or p4s, … are valid?