Share your ROUTE v2.0 Experience

which dump is valid for 300-101 exam , please ?

R1—————————-R2——————————R3
23.23.23.23 12.12.12.12 11.11.11.11

R3 is configured as eigrp stub. What will the show ip route be on R1 look like?

It will show connected and summary route from R3

@Sims, thank you for sharing this new dump! However I cannot open it with my VCE Player v1.1.2. How could you open it?

which two protocols are required for DMVPN?(choose two)
A. IPsec
B. PPTP
C. mGRE
D. NHRP
E. Open VPN
Correct Answer: CD or AD????????????
need help !!!

A and D

no way man! Answers are C and D

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_dmvpn/configuration/15-s/sec-conn-dmvpn-15-s-book/sec-conn-dmvpn.pdf

Page 5

I would say C and D

For sure is C and D

Someone can help me?

Q. NTP Stratum (choose two correct):
A. highest valid NTP stratrum level is 16
B. stratrum 1 – directly connect to authoritative server
C. stratrum 0 – directly connect to authoritative server
D. stratrum 15 – invalid ntp
E. Stratrum 2 – receives its time through NTP from a stratum 1 time server

Resp: A,E OR B,E ??

NTP uses a stratum to describe the distance between a network device and an authoritative time source:
• A stratum 1 time server is directly attached to an authoritative time source (such as a radio or atomic
clock or a GPS time source).
• A stratum 2 NTP server receives its time through NTP from a stratum 1 time server.

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/5_x/nx-os/system_management/configuration/guide/sm_nx_os_cg/sm_3ntp.pdf

which two protocols are required for DMVPN?(choose two)
A. IPsec
B. PPTP
C. mGRE
D. NHRP
E. Open VPN
Correct Answer: CD or AD???????????
IPSec is not requied but can be used
mGre must be and NHRP must be

Following the possible new questions and possible answers:

Q. NTP Stratum (choose two correct):
A. highest valid NTP stratrum level is 16
B. stratrum 1 – directly connect to authoritative server
C. stratrum 0 – directly connect to authoritative server
D. stratrum 15 – invalid ntp
E. Stratrum 2 – receives its time through NTP from a stratum 1 time server

Resp: B,E

********************************************

Q. what are two rules for compacting IPV6 address?

A. every 16-bits segment that consists of all zeroes can be represent with a single 0
B. the trailling zeores in any 16-bit segment do not have to be written
C. the leading zeroes in any 16-bi segment do no have to be written
D. any single, continuos string of one mor 16-bits segment that consists of all zeroes can be represet with a double ::
E. the maximun number of time a double colon can replace a 16-bit segment that cosists of all zeroes is two
F. two zeroes in the middle of any 16-bit segme do not have to be written

Resp: A,D

********************************************

Q. which fuctionality is requierd within an IP router that is situated at the boundary of an IPv4 networks and IPV6 networks

to allow communication betwon IPv6-only and Ipv4-only nodes?

A. Autoconfiguration
B. automatic 6to4 tunnet
C. automatic 6to 4 relay
D. networks address translator – protocol (NAT-PT)
E. intrasite automatinc Tunnel address protocol

Resp: B

********************************************

Q. which statement is true convering 6to4 tunneling?

A. IPV4 traffic is encapsulated with an IPV6 header
B. the edge router can use locally configured IPV6 address
C. host and routers inside a 6to4 site will need a special code
D. an edge router must use IPV6 address of 2002::/16 in its prefix

Resp: B ou D

********************************************

show ntp associations:
~172.31.32.2 172.31.32.1 5 29 1024 377 4.2 -8.59 1.6
+~192.168.13.33 192.168.1.111 3 69 128 377 4.1 3.48 2.3
#~192.168.13.57 192.168.1.111 3 32 128 377 7.9 11.18 3.6
* master (synced), # master (unsynced), + selected, – candidate, ~ configured

Q. Which of the following is true
A. Master is syncing and exchanging NTP packets successfully
B. Master is not syncing but exchanging NTP packets successfully
C. Master is not syncing and not exchanging NTP packets

Resp: B

What Does a Pound Sign Indicate?
A pound sign (#) displayed next to a configured peer in the show ntp associations command output indicates that the router

isn’t syncing with the peer even though NTP request and response packets are being exchanged

Mas nesse caso como há outros server configurados (~), ele compartilha.

********************************************

Q. What is show on logging console 7?

Resp: Emergency, Alert, Critical, Error, Warning, Notification, Informational and Debugging

Emergency (severity 0)—The system is unusable
Alert (severity 1)—Immediate action is needed
Critical (severity 2)—Critical condition
Error (severity 3)—Error condition
Warning (severity 4)—Warning condition
Notification (severity 5)—Normal but significant condition
Informational (severity 6)—Informational message
Debugging (severity 7)—Debugging message

********************************************

Q. Features of Netflow version 9? (choose two)

A. IEEE standard
B. IETF standard
C. ingress only
D. egress only
E. ingress/egress

Resp: B,E

********************************************

Q. What happens when an IPv6 enabled router running 6to4 must send a packet to a remote
destination and the next hop is the address of 2002::/16?

A. The IPv6 packet has its header removed and replaced with an IPv4 header
B. The IPv6 packet is encapsulated in an IPv4 packet using an IPv4 protocol type of 41
C. The IPv6 packet is dropped because that destination is unable to route IPv6 packets
D. The packet is tagged with an IPv6 header and the IPv6 prefix is included

Resp: B

********************************************

Drag and Drop:

• Address registration – allows neighbouring Cisco devices to exchange the management ip addresses
• Global addressing – Enables Frame Relay to identify interfaces in same manner as LAN
• Multicasting – provides most efficient transmission of routing protocol messages and support address resolution
• Simple flow control – supports devices that are unable to use congestion notification
• Virtual circuit – Prevents data from being transmitted in Black Hole

*********************************************

interface Serial0
no ip address
Blank Space <- Drag from options "encapsulation frame-relay IETF"

interface Serial0.1 point-to-point
ip address x.x.x.138 255.255.255.252
Blank Space <- Drag from option "frame-relay interface-dlci 80 IETF"

Can someone tell me which site is reliable to buy the questions for this exam?

can someone provide a link to download the software to read vce. files please ?

Shouldn’t this be C and D?

********************************************
Q. what are two rules for compacting IPV6 address?
A. every 16-bits segment that consists of all zeroes can be represent with a single 0
B. the trailling zeores in any 16-bit segment do not have to be written
C. the leading zeroes in any 16-bi segment do no have to be written
D. any single, continuos string of one mor 16-bits segment that consists of all zeroes can be represet with a double ::
E. the maximun number of time a double colon can replace a 16-bit segment that cosists of all zeroes is two
F. two zeroes in the middle of any 16-bit segme do not have to be written
Resp: A,D

The new questions from Anonymous look good. I took the test Saturday and I recognize those. The very top one referencing the 3 routers and what will the routing table look like is a new “refer to the exhibit” I haven’t seen before. The frame relay drag and drog where you drop the completed configuration was there as well. Also there was a BGP refer to the exhibit where you had to choose the route for a certain network based off of the shown routing table.

From this question , my answer is different : i would choose NAT-PT as you can see with this cisco-link
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_nat/configuration/15-mt/nat-15-mt-book/ip6-natpt.html

Q. which fuctionality is requierd within an IP router that is situated at the boundary of an IPv4 networks and IPV6 networks

to allow communication betwon IPv6-only and Ipv4-only nodes?

A. Autoconfiguration
B. automatic 6to4 tunnet
C. automatic 6to 4 relay
D. networks address translator – protocol (NAT-PT)
E. intrasite automatinc Tunnel address protocol

Resp: B

Anyone have more detail about the group radius and group tacacs DnD?

@ Everyone

In the EIGRP Stub Lab make sure you verify the show ip route in R3 and verify 2 subnets. If you see “NULL” use ” ip summary-address eigrp 123 10.0.0.0 255.0.0.0 and re-check. Copy running-config did not work…

Anyone have anything on the AAA DND?

@Sims
Hi Bro
it is valid?

https://anonfile.com/y8M8G6d4b8/300-101.vce

@ peterhammill

I agree with you .. yeah the answer is D (NAT-PT)

@ Confused

This is the DnD as mentioned before in this forum..
I remember that Ordonez said, “the description differs in the exam ( not exactly the same)”.

if-needed : Does not authenticate if the user has already been authenticated on a TTY line.

krb5 : Uses Kerberos 5 for authentication (can be used only for Password Authentication Protocol
“PAP” authentication)

local : Uses the local username database for authentication.

none : Uses no authentication.

group radius : Uses the list of all RADIUS servers for authentication.

group tacacs+ : Uses the list of all TACACS+ servers for authentication.

group group-name : Uses a subset of RADIUS or TACACS+ servers for authentication as defined
by the aaa group server radius or aaa group server tacacs+ command.

Can some one please help me and answer the questions below… I found different statements and not sure sure which should be right…

How to set up IP SLA to monitor jitter between the certain limits? best, i – internal,
r RIB-failure, S Stale Origin codes: i – IGP, e – EGP, ? – incomplete
Network Next Hop Metric LocPrf Weight Path
*>i 10.1.1.0/24 192.168.1.2 0 0 0 10000 i
*>i 10.2.2.0/24 192.168.3.2 0 0 0 10000 i
*>i 172.17.1.0/24 10.0.0.1 0 0 0 32768 i
A. 10.0.0.1
B. 192.168.1.2
C. 10.0.0.2
D. 192.168.3.2
Answer: ?

######

Which value does Frame Relay use to identify a connection between a DTE and DCE?
A. DLCI
B. IP address
C. MAC address
D. VLAN ID
Answer: ?

######

What configurations does PPPoE allow? (Choose two)
A. Client can be installed on the same network devices as server
B. 8 clients can be configured on 1 CPE
C. Clients can connect to multiple hosts over DMVPN
D. Client connecting over ATM PVC
E. Client installed on native IPv6 network

In which two ways can split horizon issues be overcome in a Frame Relay network environment? (choose two.)
A. Configuring one physical serial interface with Frame Relay to various remote sites.
B. Configure a loopback interface with Frame Relay to various remote sites
C. Configuring multiple subinterfaces on a single physical interface to various remote sites.
D. Enabling split horizon.
E. Disabling split horizon.

######

A network engineer enables OSPF on a Frame Relay WAN connection to various remote sites, but no OSPF
adjacencies come up.
Which two actions are possible solutions for this issue? (Choose Two)
A. Change the network type to point-to-multipoint under WAN interface.
B. Enable virtual links.
C. Change the network type to nonbroadcast multipoint access.
D. Configure the neighbor command under OSPF process for each remote site.
E. Ensure that the OSPF process number matches among all remote sites
EIGRP is implemented in a frame relay network but there is no adjacency.

######

Which options cause the adjacency to come up? (choose 2)
A. disable split horizon
B. neighbor command to configure it for a point to multipoint on the WAN interface
A network engineer is modifying RIPng timer configuration.

######

which two statements about ip access lists are true?(choose two)
A. They support wildcard masks to limit the address bits to which entries are applied
B. Extended access lists must include port numbers
C. IP access list without at least one deny statement permit all traffic by default

######

Which next hop is going to be used for 172.17.1.0/24
Router(config-if)#do show ip bgp
BGP table version is 4, local router ID is 156.12.1.6
Status codes: s suppressed, d damped, h history, * valid, > best, i – internal,
r RIB-failure, S Stale Origin codes: i – IGP, e – EGP, ? – incomplete
Network Next Hop Metric LocPrf Weight Path
*>i 10.1.1.0/24 192.168.1.2 0 0 0 10000 i
*>i 10.2.2.0/24 192.168.3.2 0 0 0 10000 i
*>i 172.17.1.0/24 10.0.0.1 0 0 0 32768 i
A. 10.0.0.1 ## CORRECT
B. 192.168.1.2
C. 10.0.0.2
D. 192.168.3.2

###### If someone can complete this questions would be great ! ;)

another diagram that I have been thinking about was between 2 routers and they had a eigrp protocol running between- the question was that they can ping between them with no problem but when they are trying through the vrf connection it doesn’t work, what’s wrong? which command to put on both routers to make it work ?

A rd 1:100 both
‎b. Network with a 255.255.240.0
‎c. autonomous-system 100 – that’s what I chosen
‎d. Don’t remember

how to turn on ipv6 eigrp on
a. ipv6 nat
b. ipv6 nat-pt
c. ipv6 eigrp nat
d. ipv6 eigrp nat-pt

######

one I remember was something about communication between ipv6 to ipv4 – very easy question choose 2
a. Layer 2 switch
b. layer 3 switch
c. ipv4 address — XX
d. ‎ipv6 addresses — XX

######

trap Snmp 2c 10 and then something
question was- what does that 10 means?
a. ACL that is applied
b. community string
c. It would be public (Don’t remember exactly)

###### If someone can complete this questions would be great ! ;)

‎ a diagram of bgp config between 3 routers R1-R2-R3, which showed the config on R2, the question was what command is missing.- they were trying to make adj between the routers on the loopback address.
a. update source X — this is what I chosen.
b. ebpg-multihope 1
c. load balancing something.
d. no synchranize

###### If someone can complete this questions would be great ! ;)

-‎a diagram that I was thinking a lot of was between 3 router R1-R2-R3 (sound kind of similar to a new question that has been posted over here) which Eigrp 100 is configured on all of them.
The router in the middle (R2) has his loopback put in shut and the router on the right is a stub (R3).
The Question was :
Who would get the query message for that loopback that has been put in shut
-‎a. The feasible successors’ routers would get the query — that’s what I choosen
-‎ R1 would request the query
-‎ R1 and R3 would request the query
-‎ R3 would request the query

Can some one please help me and answer the questions below… I found different statements and not sure sure which should be right…

How to set up IP SLA to monitor jitter between the certain limits? best, i – internal,
r RIB-failure, S Stale Origin codes: i – IGP, e – EGP, ? – incomplete
Network Next Hop Metric LocPrf Weight Path
*>i 10.1.1.0/24 192.168.1.2 0 0 0 10000 i
*>i 10.2.2.0/24 192.168.3.2 0 0 0 10000 i
*>i 172.17.1.0/24 10.0.0.1 0 0 0 32768 i
A. 10.0.0.1
B. 192.168.1.2
C. 10.0.0.2
D. 192.168.3.2
Answer: ?
This question is incomplete…

Something I came up with, this is not how it is on the exam.
Hopefully someone has more details on this soon.

AAA DND

if-needed:
The if-needed keyword means that if the user has already authenticated by going through the ASCII login procedure, then PPP is not necessary and can be skipped.

KRB5:
Remote users logging in to the network are prompted for a username. PAP authentication.

Local Case:
Use the local username database for authentication. Case-Sensitive

None: No authentication

Group Radius:
Security Server is used for Authorization defined by associating attributes-value pairs with a users assigned rights.

Group Tacacs+:
Security Daemon is used for Authorization defined by associating attributes-value pairs with a users assigned rights.

Group group-name:
Uses a subset of RADIUS or TACACS+ servers for authentication as defined by the aaa group server radius or aaa group server tacacs+ command.

My friend passed ccnp route. He hv all outside questions. Voucheric at gmail

@ Sims

I added to your practice quiz, please review and advise. Everyone is welcome but also correct as needed.

https://anonfile.com/s1l0H7d7b3/practice_quiz2.txt

Hey Anon

Features of Netflow version 9? (choose two)
A. IEEE standard
B. IETF standard
C. ingress only
D. egress only
E. ingress/egress
Answer B D

The dump answer say is B E. Please verify.

Netflow v9 is capable of ingress and egress flow. Answer is B and E.

Thanks Anon… I take the exam tomorrow – this is a good review.

Is this the correct answer?

Q. which statement is true convering 6to4 tunneling?

A. IPV4 traffic is encapsulated with an IPV6 header
B. the edge router can use locally configured IPV6 address
C. host and routers inside a 6to4 site will need a special code
D. an edge router must use IPV6 address of 2002::/16 in its prefix

Resp: D

Guys, I’ll try my best to remember some new stuff tomorrow… but it’ll be hard, my focus will be on passing the exam and not memorizing questions… but I’ll try my best.

@ Sims
Good luck and take your time. There is more than enough time for the test so if you need to take a few minutes on a question go for it.

@DRC007

Review this site for more information:

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipv6/configuration/xe-3s/ipv6-xe-36s-book/ip6-tunnel.pdf

The IPv4 address embedded in the IPv6 address is used to find the other end of the
automatic tunnel.

The border router at each end of a 6to4 tunnel must support both the IPv4 and IPv6 protocol stacks. 6to4 tunnels are configured between border routers or between a border router and a host.

It had Satax# as the hostname of the router
Do any one know question and answer for this ? ?
It was similar like this
A.Satax#
B.Satax#
C.Satax#
D.Satax#
E.Satax#

No, he’s a spammer.

Passed yesterday 9xx, many new question that i can not remember, same picture and diagram but different question….need full concept understanding, study dexter, all new question in this forum…i am sure that you all will pass

Passed today with 8xx score. 10-15 new questions, approximately 5 rephrased questions. The labs was the same as in digitaltut.

Good luck all!

new ccnp dumps
look my name

i have downloaded 300-101 78Q 300-101 KOR dump many page ago, is there an update ?

The ROUTE exam (exam number 300-101) is one of three exams in the updated CCNP Routing and Switching track, announced by Cisco in July 2013. https://www.youtube.com/watch?v=3WgyM-TlmGU

i also see a 143q on exam collection but it’s premium….does anyone have it ?

Hello everybody, yersterday i had my exam, but i lost…

For the LAB:
PBR, EIGRP Stub and EIGRP Eval sim, the same than here….

For DND:

Router:
Prompts the user for a username and password
Passes login information to the TACAS+ server
TACACS+:
Authorizes the user
Authenticates the user
USER:
Provides access credentials
Attemps to access the router

Address registration – allows neighboring Cisco devices to exchange the management ip addresses
Global addressing – Enables Frame Relay to identify interfaces in same manner as LAN
Multicasting – provides most efficient transmission of routing protocol messages and support address resolution
Simple flow control – supports devices that are unable to use congestion notification
Virtual circuit – Prevents data from being transmitted in Black Hole
FECN : A logical connection comprising two endpoints and a CIR
SVC: A circuit that provides temporary on-demand connections between DTE’s
LMI: A signaling mechanism for Frame Relay devices
PVC: A logical connection comprising two endpoints and a CIR
DLCI: A locally significant ID

excessive unicast flooding – condition caused by include a host port in STP
asymmetric routing – cause of inconsistent traffic patterns
out-of-order packet – potential resault of disabling FIFO
TCP starvation – potentail effect of excessive UDP traffic on the link
latency – condition in which packet require an excessive length of time to traverse a switch

mGRE: Technologie that support dynamic tunnel endpoints
IPsec: An encryption protocol used to secure tunnel
Keepalive: A technologie that prevent one side of the tunnel from going down…
MSS: A configurable value that prevents an interface from sending packets…
Tunnel key: A clear-text password that confirms the peer connection.

DHCP >there was a new one<
ip dhcp relay information option???
ip dhcp relay information check cheking key words???
ip dhcp relay information policy policy key words???
ip dhcp relay information trusted-sources???

For MCQ:
Questions find in this forum or in Dexter:
QUESTION 3
The Neighbor Discovery Protocol in ipv6 is replaced with which discovery protocol in ipv4?
A. ARP
B. ICMP
C. UDP
D. TCP
E. RFC
Correct Answer: AB
Section: 1.0 Network Principles

QUESTION 5
Which two protocols can cause TCP starvation? (Choose two)
A. TFTP
B. SNMP
C. SMTP
D. HTTPS
E. FTP
Correct Answer: AB
Section: 1.0 Network Principles
Explanation
Explanation/Reference:
TFTP (69) and SNMP (161) are UDP protocols

QUESTION 11
What is the default value of TCP maximum segment size?
A. 536
B. 1492
C. 1500
D. 1508
Correct Answer: A
Section: 1.0 Network Principles

QUESTION 3
Frame Relay LMI autosense. Which statements are true? (Choose two.)
A. Line should be up and protocol should be down
B. Protocol must be up
C. It only works on DTEs
D. It only works on DCEs
Correct Answer: AC
Section: 2.0 Layer 2 Technologies

QUESTION 10
What configurations does PPPoE allow? (Choose two)
A. Client can be installed on the same network devices as server
B. 8 clients can be configured on 1 CPE
C. Clients can connect to multiple hosts over DMVPN
D. Client connecting over ATM PVC
E. Client installed on native IPv6 network
Correct Answer: BC

QUESTION 31
In which two ways can split horizon issues be overcome in a Frame Relay network environment? (choose two.)
A. Configuring one physical serial interface with Frame Relay to various remote sites.
B. Configure a loopback interface with Frame Relay to various remote sites
C. Configuring multiple subinterfaces on a single physical interface to various remote sites.
D. Enabling split horizon.
E. Disabling split horizon.
Correct Answer: CE
Section: 2.0 Layer 2 Technologies

A network engineer enables OSPF on a Frame Relay WAN connection to various remote sites, but no OSPF
adjacencies come up.
Which two actions are possible solutions for this issue? (Choose Two)
A. Change the network type to point-to-multipoint under WAN interface.
B. Enable virtual links.
C. Change the network type to nonbroadcast multipoint access.
D. Configure the neighbor command under OSPF process for each remote site.
E. Ensure that the OSPF process number matches among all remote sites
Correct Answer: AD

QUESTION 34
In a point-to-multipoint Frame Relay topology, which two methods ensure that all routing updates are received
by all EIGRP routers within the Frame Relay network? (Choose Two)
A. Use statically defined EIGRP neighbors on the hub site.
B. Create separate address families.
C. Disable split horizon.
D. Use subinterfaces.
E. Disable EIGRP auto summary.
Correct Answer: CD

QUESTION 43
You need the IP address of the devices with which the router has established an adjacency. Also, the
retransmit interval and the queue counts for the adjacent routers need to be checked. What command will
display the required information?
A. show ip eigrp adjacency
B. show ip eigrp topology
C. show ip eigrp interfaces
D. show ip eigrp neighbor
Correct Answer: D

QUESTION 49
Refer to Exhibit. R1 is unable to ping interface S0/0 of R2.
What is the issue the configuration that is shown here?

A. The route-target configuration command is missing.
B. The interface IP addresses are not in the same subnet.
C. the syntax of the ping command is wrong.
D. The default route configuration is missing.
E. The serial interfaces belong to the global table instead of vrf Yellow.
Correct Answer: E
Section: 3.0 Layer 3 Technologies

QUESTION 62
Which three configuration parameters can a DHCPV6 pool contain? (Choose three.)
A. domain search list
B. router IP
C. default gateway
D. prefix delegation
Dexter ITC
E. DNS servers
F. subnet mask
Correct Answer: ADE

QUESTION 70
Which three options are valid DHCPv6 functions? (Choose three.)
A. Server
B. client
C. approver
D. requester
E. requester
F. ACK
G. relay
Correct Answer: ABG

QUESTION 75
DHCPv6 can obtain configuration parameters from a server through rapid two-way message exchange.
Which two steps are involved in this process? (Choose Two)
Dexter ITC
A. solicit
B. advertise
C. request
D. auth
E. reply
Correct Answer: AE

QUESTION 97
A network engineer has set up VRF-Lite on two routers where all the interfaces are in the same VRF. At a later
time, a new loopback is added to Router 1, but it cannot ping any of the existing interfaces. Which two
configurations enable the local or remote router to ping the loopback from any existing interface? (Choose two.)
A. adding a static route for the VRF that points to the global route table
B. adding the loopback to the VRF
C. adding dynamic routing between the two routers and advertising the loopback
D. adding the IP address of the loopback to the export route targets for the VRF
E. adding a static route for the VRF that points to the loopback interface
F. adding all interfaces to the global and VRF routing tables
Correct Answer: AB

QUESTION 111
For security purposes, an IPv6 traffic filter was configured under various interfaces on the local router.
However, shortly after implementing the traffic filter, OSPFv3 neighbor adjacencies were lost. What caused this
issue?
A. The traffic filter is blocking all ICMPv6 traffic.
B. The global anycast address must be added to the traffic filter to allow OSPFv3 to work properly.
C. The link-local addresses that were used by OSPFv3 were explicitly denied, which caused the neighbor
relationships to fail.
D. IPv6 traffic filtering can be implemented only on SVIs.
Dexter ITC
Correct Answer: C

QUESTION 113
What are three key concepts that apply when configuring the EIGRP stub routing feature in a hub and spoke
network? (Choose three.)
A. A hub router prevents routes from being advertised to the remote router.
B. Only remote routers are configured as stubs.
C. Stub routers are not queried for routes.
D. Spoke routers connected to hub routers answer the route queries for the stub router.
E. A stub router should have only EIGRP hub routers as neighbors.
F. EIGRP stub routing should be used on hub routers only.
Correct Answer: BCE

QUESTION 1
What is the NHRP role in DMVPN? (Choose 2)
A. obtains the next-hop to be used for routing
B. routes the packet through the tunnel
C. identifies the PIM-SM RP used to route the packet
D. can authenticate VPN endpoints
E. It requires each tunnel endpoint to have an unique network ID
Correct Answer: AD

QUESTION 18
Which two statement about GRE tunnel interface are true? (Choose two)
A. A tunnel can be established when a source the source interface is in the up/down state
B. A tunnel Destination must be Routable, but it can be unreachable
C. To establish a tunnel the source interface must be a loopback
D. To Establish a tunnel the source interface must be up/up state
E. A tunnel destination must be a physical interface that is on up/up state
Correct Answer: BD

QUESTION 23
Which two statements about EVN are true? (Choose two)
A. Virtual network tags are assigned per-VRF.
B. it is supported only on access ports.
C. Virtual network tags are assigned globally.
D. Routing metrics can be manipulated only from directly within the routing-context configuration.
E. The VLAN ID in the 802.1q frame carries the virtual network tag.
F. The VLAN ID is the ISL frame carries the virtual network tag.
Correct Answer: AE

QUESTION 34
Which two phases of DMVPN allow to spoke sites to create dynamic tunnels to one another? (Choose Two)
A. Phase 1
B. Phase 2
C. Phase 3
D. Phase 4
E. Phase 5
Correct Answer: BC

5.0 Infrastructure Security
QUESTION 1
One of the AAA Authentication PPP Methods if PAP used
In my exam: Which keyword aaa authentication ppp command support PAP only
A. krb5
B. ssl
C. transliteration methods
D. UPN
Correct Answer: A

QUESTION 5
Which two statements about IP access list are true? (Choose two)
A. They support wildcard masks to limit the address bits to which WAN technologiesed
B. Extended access lists must include port numbers
C. IP access list without at least one deny statement permit all traffic by default
D. They end with an implicit permit
E. Entries are applied to traffic in the order in which they appear
Correct Answer: AE

QUESTION 12
What are 2 protocols used for user with authentication on network device?
A. CHAP
B. Radius
C. 802.1x
D. PAP
E. TACACS+
Correct Answer: BE

QUESTION 1
Refer to Exhibit. Which two reasons for IP SLA tracking failure are likely true? (Choose Two)
A. The source-interface is configured incorrectly.
B. The destination must be 172.30.30.2 for icmp-echo.
C. A route back to the R1 LAN network is missing in R2.
D. The default route has wrong next hop IP address.
E. The threshold value is wrong.
Correct Answer: AC

QUESTION 5
Which option is a prerequisite for stateful NAT64?
In my Exam: Which 3 fonctions stateful NAT 64
A. IPsec for IPv6
B. DNS64
C. Application Level Gateway
D. ICMP64
Dexter ITC
Correct Answer: B

QUESTION 9
Which two options are limitation of stateful NAT64? (Choose two))
A. It is unable to route VRF traffic
B. It is unable to route multicast traffic
C. It supports FTP traffic only with an ALG
D. It supports DNS64 only
E. Layer 4 supports TCP only
Correct Answer: AB
QUESTION 13
Refer to the Exhibit. Which effect of this configuration is true?
Dexter ITC
A. R1 synchronizes with systems that include authentication key 5 in their packets.
B. R1 acts as an authoritative clock with a priority ID of 1.
C. R1 acts as an authoritative clock at stratum 5.
D. R1 is the NTP client for a stratum 1 server.
Correct Answer: C

QUESTION 25
Which command enables NAT-PT on an IPv6 interface?
A. ipv6 nat
B. ipv6 nat enable
C. ipv6 nat-pt
D. ipv6 nat-pt enable
Correct Answer: A

QUESTION 34
What is the reasons of command:
router(config)# snmp-server host 192.168.1.3 traps version 2c CISCORO
A. for network system to management server

QUESTION 47
Dexter ITC
A network engineer wants to notify a manager in the events that the IP SLA connection loss threshold reached.
Which two feature are need to implements this functionality? (choose two)
A. MOS
B. Threshold action
C. Cisco IOS EEM
D. SNMP traps
E. logging local
Correct Answer: BD

QUESTION 51
Which three items can you track when you use two time stamps with IP SLAs? (Choose three.)
A. delay
B. jitter
C. packet loss
D. load
E. throughput
F. path
Correct Answer: ABC

QUESTION 65
After a recent DoS attack on a network, senior management asks you to implement better logging functionality
on all IOS-based devices.
Which two actions can you take to provide enhanced logging results? (Choose two.)
A. Use the msec option to enable service time stamps.
B. Increase the logging history.
C. Set the logging severity level to 1.
D. Specify a logging rate limit.
E. Disable event logging on all noncritical items.
Correct Answer: AB

QUESTION 68
To configure SNMPv3 implementation, a network engineer is using the AuthNoPriv security level. What effect
does this action have on the SNMP messages?
A. They become unauthenticated and unencrypted.
B. They become authenticated and unencrypted.
C. They become authenticated and encrypted.
D. They become unauthenticated and encrypted.
Correct Answer: B

QUESTION 70
A network engineer has left a NetFlow capture enabled over the weekend to gather information regarding
excessive bandwidth utilization. The following command is entered:
switch#show flow exporter Flow_Exporter-1
What is the expected output?
A. configuration of the specified flow exporter
B. current status of the specified flow exporter
C. status and statistics of the specified flow monitor
D. configuration of the specified flow monitor
Correct Answer: B

QUESTION 76
A network engineer executes the show ip cache flow command. Witch two types of information are displayed in
the report that is generated? (Choose two)
A. top talkers
B. flow export statistics
C. flow sample for specific protocols
D. MLS flow traffic
E. IP packet distribution
Correct Answer: CE

QUESTION 2
Where are EIGRP successor routes stored?
A. In the routing table only
B. In the neighbor table only
C. In the topology table only
D. In the routing table and the topology table
E. In the routing table and the neighbor table
Correct Answer: D

QUESTION 9
Which two commands would be used to troubleshoot high memory usage for a process? (Choose two.)
Dexter ITC
A. router#show memory allocating-process table
B. router#show memory summary
C. router#show memory dead
D. router#show memory events
E. router#show memory processor statistics
Correct Answer: AB

QUESTION 11
Which three IP SLA performance metrics can you use to monitor enterprise-class networks? (Choose three.)
A. Packet loss
B. Delay
C. bandwidth
D. Connectivity
E. Reliability
F. traps
Correct Answer: ABD

QUESTION 3
The Neighbor Discovery Protocol in ipv6 is replaced with which discovery protocol in ipv4?
A. ARP
B. ICMP
C. UDP
D. TCP
E. RFC
Correct Answer: AB

In my exam i have to make only 1 choice, my answer: ICMP ?

@Zerome, B. ICMP is correct.

“The IPv6 neighbor discovery process uses Internet Control Message Protocol (ICMP) messages and solicited-node multicast addresses to determine the link-layer address of a neighbor on the same network (local link), verify the reachability of a neighbor, and track neighboring devices.”

I had also these questions:

Which value does GRE tunnel use to identify the end points or destination
A. IP ADDRESS
B. MAC ADDRESS
C. DLCI
D. TUNNEL
Correct Answer: A or C ?????
what correct answer???

Question 2
What is true about peer groups? (Choose two)
A. Optimize backdoor routes
B. If you change configuration then it effects all peers in the group
C. Peer groups can send soft updates to all
D. Updates can be sent with multicast
Answer: B C

Question 8
What other action does an IPv6 filter do when it drops a packet?
Answer: generates an ICMP unreachable message

Question 10
What from the following can cause an issue for uRPF?
A. Asymetric routing
B. CEF not enabled
C. uRPF not applied to the traffic source
D. if it is used as ingress filtering
Answer: A

Q. What would you configure on snmpv3 to allow authentication
A. Authpriv
B. authnopriv
C. noauthnopriv
D. authmember

1.What would you configure on snmpv3 to allow encryption ?
Choose : Authpriv

Two aspects of an IP SLA operation can be tracked: state and reachability. Which statement about state
tracking is true?
A. When tracking state, an OK return code means that the track’s state is up; any other return code means
that the track’s state is down.
B. When tracking state, an OK or over threshold return code means that the track’s state is up; any other
return code means that the track’s state is down.
C. When tracking state, an OK return code means that the track’s state is down; any other return code means
that the track’s state is up.
D. When tracking state, an OK or over threshold return code means that the track’s state is down; any other
return code means that the track’s state is up.
Correct Answer: B

Some of these questions are rephrased…

Differents themes of questions I have never seen before…
Sorry but for the moment I can’t remember the choices of answers…

DHCP server special application, additional parameter: 1: Option, 2: …
Which three functionalities are specific to stateful NAT64
Statement about EVN
SNMP-server user abcd access 16… Questions was, what is the 16 value??? ACL, or…
Component for Dual Stack
Windows Server Syslog blocked by ACL and 1:port UDP 514, 2:TCP 514, 3:UDP 513, 4:TCP 513
Statement about IPv6 EIGRP
Many to one method of mapping IP
CEF table forwarding
Statement about URPF
Show IP Flow export
SNMP traps

QUESTION 3
The Neighbor Discovery Protocol in ipv6 is replaced with which discovery protocol in ipv4?
A. ARP
B. ICMP
C. UDP
D. TCP
E. RFC
Correct Answer: AB

In my exam i have to make only 1 choice, my answer: ICMP ?

I will take ARP, discovery protocol of IPV4