Share your ROUTE v2.0 Experience

Hi my name is Anus. I need latest dumps.

@sw, the correct answer is B (authnopriv).

about DND DHCP Relay Information:

Option subscriber-id – Perform this task to enable an ISP to add a unique identifier to the subscriber-identifier suboption of the relay agent information option.
The unique identifier enables an ISP to identify a subscriber, to assign specific actions to that subscriber (for example, assignment of host IPaddress,subnet mask, and domain name system DNS), and to trigger accounting.

@sw, asdf, Tomcat

Q. What would you configure on snmpv3 to allow authentication
A. Authpriv
B. authnopriv
C. noauthnopriv
D. authmember

Why not C? When we using “noauthnopriv” authentication is ON, but only in cleartext. And when we using “authnopriv” auth is on too, but with hash algorithm (md5, SHA) this time. The question is not about type of auth (cleartext, …) but about enabled auth.
Can someone clarify this question??
Thanks in advance!!

Hi my name is Anus. Can post latest dumps here please.

Anon. It’s b or c. Noauthnopriv just uses a username. It can be b or c depending on if they ask about encryption. I don’t think we’re seeing the whole question.

Sorry. I mean it’s A or B. Def not C.

From another forum:
Q: logging console 7. what is the effect of applying this command only without other logging command ?
A. you can see debug if you’re connected in SSH
B. High CPU utilization
C. log will show on active console connection only
D. …
Answer: C

Q: NTP Stratum (choose two correct)
A. highest valid NTP stratrum level is 16
B. stratrum 1- directly connect to authoritative server
C. stratrum 0 – directly connect to authoritative server
D. stratrum 15 – invalid ntp
E stratrum 2 – receives its time through NTP from a stratum 1 time server

Answer: BE

Hi All,

where can i buy the valid exam for CCNP?

Thanks EIGRP stub. I take my exam Friday. I’ll come back with my experience.

When the new dumb will release ?

@CNNP Fail Fail Fail

What is the minimum log level for the event generated when an ACL drops a packet?
A. 4
B. 5
C. 3
D. 7
E. 6

Answer: E

Explanation

When the ACL logging feature is configured, the system monitors ACL flows and logs dropped packets and statistics for each flow that matches the deny conditions of the ACL entry.

The log and log-input options apply to an individual ACE and cause packets that match the ACE to be logged. The sample below illustrates the initial message and periodic updates sent by an IOS device with a default configuration using the log ACE option.

*May 1 22:12:13.243: %SEC-6-IPACCESSLOGP: list ACL-IPv4-E0/0-IN permitted tcp 192.168.1.3(1024) -> 192.168.2.1(22), 1 packet

Reference: https://www.cisco.com/c/en/us/about/security-center/access-control-list-logging.html

From the example above we can see when an ACL drops a packet, it generates a level 6 Syslog (%SEC-6-)

Did anyone get below question in there exam
It had Satax# as the hostname of the router
Do any one know question and answer for this ? ?
It was similar like this
A.Satax#
B.Satax#
C.Satax#
D.Satax#
E.Satax#

#### NEW D&D #### i’will seen the exam in today. Good luck

excessive unicast flooding – condition caused by include a host port in STP
asymmetric routing – cause of inconsistent traffic patterns
out-of-order packet – potential resault of disabling FIFO
TCP starvation – potentail effect of excessive UDP traffic on the link
latency – condition in which packet require an excessive length of time to traverse a switch

@FirePOWDER did you pass?

FirePOWDER
DND you mentioned is already in dumps its not new

#### NEW D&D #### in exam in today

show ip eigrp neighbor – view route information sources
show ip eigrp interface – verify the routing of specific networks
show ip eigrp topology – confirm what EIGRP is learning
show ip route eigrp – confirm what is actually being used

@Anonymous, the question asks what would you configure on snmpv3 to allow ONLY authentication, but no encryption.

authPriv – communication with authentication and privacy
authNoPriv – communication with authentication and without privacy
noAuthnoPriv – communication without authentication and privacy

Therefore is the correct answer “B. authnopriv”.

@EiGRP Stub, thanks !!!

@viper something like that i dont really remb now, @fFirePowder, did you get same lab too?

when you do sh ip on eigrp lab , you can see 10.0.0.0/24 and subnnets are 10.2.0.0/24, 10.4.0.0/24 etc, shall we put 255.255.0.0 subnet mask on interface or 255.255.255.0? thats what i get on exam…

Also, one question is like scenario where dhcp server should block all routing update but allow other web access ( same as passive interface default scenario we have on dump) but we have answers option on access-list NOT Passive interface.

A. core router (config-router)#Access list 101 ..
B. core router (config-if)#…..
C. dhcp server #
d. Dhcp server#

answer a and b are same but only difference on config mode( if and router) using acl config.. i pick B , any advise?

Q: logging console 7. what is the effect of applying this command only without other logging command ?
A. you can see debug if you’re connected in SSH
B. High CPU utilization
C. log will show on active console connection only
D. …

logging console X: to send system logging (syslog) messages to all available TTY lines and limit messages based on severity, use the logging console command in global configuration mode.

TTY = serial/console port.

Correct answer is definitely C.

FirePOWDER
also Eigrp DND you mentioned is already in dumps its not new

asdf thanks for console 7 question
i was looking for it

@ccnp_route, are you sure they were “(config-router)” and “(config-if)”? I mean, you can’t use the “access-list” command in these modes.

However, you can block all routing updates but allow any other web access with ACL like this:

R1(config)#access-list 100 permit tcp any any eq 80
R1(config)#access-list 100 deny ip any any
R1(config)#int fa0/0
R1(config-if)#ip access-group 100 in

(I think it should be “in”, because “an outbound access list does not examine (and will not block) any traffic that is generated by the router itself.”)

Please correct me if I’m wrong.

@trytohelp,

thanks for your sharing.

Q: NTP Stratum (choose two correct)
A. highest valid NTP stratrum level is 16
B. stratrum 1- directly connect to authoritative server
C. stratrum 0 – directly connect to authoritative server
D. stratrum 15 – invalid ntp
E stratrum 2 – receives its time through NTP from a stratum 1 time server

R1(config)#ntp master ?

Yes, definitely B+E are correct.

Hello guys,

Can anyone happen to share the Digi Dumps, as i do not have a membership?
Much appreciated!!!!!

I pass couple hours ago,got8xx , 50-60% new questions -what i mean new some were new completely and some modifed from old,dont just memorize questions and answers, i will try to remember new questiona and post here, for example this question above from asdf i got on exam my answer is stratum 0 and stratum 15, I didnt know this question

Passed today! New questions are mostly re-worded concepts you should know if you’ve been studying. Dexter and Chinese still very helpful. Know concepts over dumps!

Dnd
Frame relay interface question
Frame relay encap
Inter ser 0.1
Frame relay mapping 100
Frame relay broadcast dlci 100

AAA DND
don’t remember the answers recommend studying AAA tacacs and radius config

Group tacacs
Group Radius
None
Local
^^
We’re the topics

BGP questions about next hop we’re new

3 sims all in Dexter or dig tut

Eigrp stub
Ospf eval
Eigrp eval

Good luck!

@ Transit
Congras, thanks for updating

just passed the Exam 889
guys all dumps are valid and all new questions mentioned here.
Guys please be confident and try to understand all dumps.

EIGRP Eval and EIGRP stup and Route map LAb

Thanks guys. I really understand everything in the dumps. You all are giving me confidence for my exam Friday.

@Zukish
Congras

hi I downloaded a pdf file from here , is it enough to pass the test ?

@Confused
Good luck buddy, I’m same as you have an exam in 2 weeks, please update us if you remember any of new questions, thanks in advance

@Zukish

Congrats. Can you pls share the dumps you got for CCNP route? I’m going for my exam next week.

Hi Mates,
I could remember me about some questions in my Exam below … If someone is able to complete it would be very helpful for all :)

1.
another diagram that I have been thinking about was between 2 routers and they had a eigrp protocol running between- the question was that they can ping between them with no problem but when they are trying through the vrf connection it doesn’t work, what’s wrong? which command to put on both routers to make it work ?

A rd 1:100 both
‎b. Network with a 255.255.240.0
‎c. autonomous-system 100 – that’s what I chosen
‎d. Don’t remember

2.
how to turn on ipv6 eigrp on
a. ipv6 nat
b. ipv6 nat-pt
c. ipv6 eigrp nat
d. ipv6 eigrp nat-pt

3.
I remember was something about communication between ipv6 to ipv4 – very easy question choose 2
a. Layer 2 switch
b. layer 3 switch
c. ipv4 address ….— XX
d. ‎ipv6 addresses ….— XX

4.
rap Snmp 2c 16 and then something
question was- what does that 10 means?
a. ACL that is applied
b. community string
c. It would be public (Don’t remember exactly)

5.
a diagram of bgp config between 3 routers R1-R2-R3, which showed the config on R2, the question was what command is missing.- they were trying to make adj between the routers on the loopback address.
a. update source X — this is what I chosen.
b. ebpg-multihope 1
c. load balancing something.
d. no synchranize

6.
-‎a diagram that I was thinking a lot of was between 3 router R1-R2-R3 (sound kind of similar to a new question that has been posted over here) which Eigrp 100 is configured on all of them.
The router in the middle (R2) has his loopback put in shut and the router on the right is a stub (R3).
The Question was :
Who would get the query message for that loopback that has been put in shut
-‎a. The feasible successors’ routers would get the query — that’s what I choosen
-‎ R1 would request the query
-‎ R1 and R3 would request the query
-‎ R3 would request the query
Not sure exactly how it went but it was something like that

Hello Everyone,

Can anyone tell me that where do you get questions :

300-320 ARCH Designing Cisco Network Service Architectures (ARCH)

@ MAS,

you can use the Chinese dump and the dexter one plus new questions posted here

Anybody have a compilation of the questions posted here? I made one a week or so ago, but I didn’t know if someone updated it? Thanks guys!

Here’s the latest certbus VCE… 602 questions. I was told this was a recent Feb update.

https://anonfile.com/y8M8G6d4b8/300-101.vce

for those who took the test please confirm if any of these are the new questions

Q1.what is the function of the snmp-server manager command?

-to enable the deive to send recive SNMP request and responses
–to disble SNMP messages from getting to the SMNP engine
-to enable the dive to send SNMP traps to the SNMP server
-to configure the SNMP server log data
________________________________________________________________
Q2.TCP traffic is blocked on port 547 between a DHCPv6 relay agent and DHCPv6 server that is configured to
perfix delegation which two outcomes will resul when the relay aget is reboot

-Routers will no obtain DCHPv6 prefiexes
-DHCPv6 clientes will be unreachable
-Hosts will nor obtain DHCv6 addresses
-the DHCP relay agent will resume ditributin addresses
– DHCP v6 address conflicts will occur on dowstram cliene
__________________________________________________________________
Q3.the 6to4 overlay tunnel configuration has been applied on each router to join isolated IPv6 networks over a Ipv4 networks which statements regarding the 6to4 overlay tunnel is true?

-The least significant 32bit inthe address referended by the ipv6 route 2002::/16 tunnel0 commando will correspond to the interface E0/0 Ipv4 address
-The least significant 32bit inthe address referended by the ipv6 route 2002::/16 tunnel0 commando will correspond to the ipv4 address assigned to the tunnel source
– the configuration is invalid since the tunnel source command must be configured with an IPV6 address
– this is actually a configuration example of an IPv4-compatible tunnel and not a 6to4 tunnel
– this is actually a configuration example of an ISATAP tunnel and not a 6to4 tunnel

______________________________________________________

Q4 what happens when an ipv6 enabled router running 6to4 must send a packet to a remote destination and the next ho is the address of 2002::/16
-the IPV6 packet has its header removed and replaced with an IPV4 header
-the IPV6 pacjet is encapsulated in an IPV4 packet using an IPv4 protocl type of 41
-the IPV6 packet is propped because that destination is unable to router IPv6 packets
– the packet is tagget with an IPV6 header and the IPV6 prefix is inluded

_________________________________________________________

Q4 what are two rules for compacting IPV6 address

-every 16-bits segment that consiists of all zeroes can be represent with a single
–
the trailling zeores in any 16-bit segment do not have to be written
-the leading zeroes in any 16-bi segment do no have to be written
-any single, continuos string of one mor 16-bits segment that consists of all zeroes can be represet wirh a double
-the maximun number of time a double colon can rplace a 16-bit segment that cosists of all zeroes is two
– two zeroes in the middle of any 16-bit segme do not have to be written

___________________________________________________–

Q5 which fuctionality is requierd within an IP router that is situadted at the boundary of an IPv4 networks and IPV6 networks to allow communication betwon IPv6-only and Ipv4-only nodes
-Autocinfiguration
-automatic 6to4 tunnet
-automatic 6to 4 relay
– networks address translator- protocl (NAT-PT)
–intrasite automatinc Tunnel address protovl

_______________________________________

Q6 which statement is true convering 6to4 tunneling
– IPV4 traffic is encapsulated with an IPV6 header
-the edge router can use locally configured IPV6 address
-host and routers inside a 6to4 site will need a special code
-an edge router must use IPV6 address of 2002::/16 in its prefix

Sims I skimmed through that VCE file. The Designer requires a password so it can’t be edited, but on the player there are duplicates of questions with different answers… maybe someone can sift through and eliminate known wrong answers, along with combining knowledge from here…

I noticed that too koki.

I think someone else needs to look at it. I don’t recognize a decent bit of questions, but maybe someone who’s recently passed/failed can check and confirm/deny ETC….

Can you tell me a little bit more about the frame relay dnd?

interface Serial0 
no ip address
Blank Space <- Drag from options "encapsulation frame-relay IETF"

interface Serial0.1 point-to-point 
ip address x.x.x.138 255.255.255.252 
Blank Space <- Drag from option "frame-relay interface-dlci 80 IETF"

That new VCE does not have the new questions I saw on the exam, however it is decent.