Share your ROUTE v2.0 Experience

@Navarro:
No these questions are valid and known….the questions were
– about uRPF (I gues 2 Questions)
– question about enable or disable split horizon but different to our examples listed in Dexter or China Dump
– question about “loose mode“ , other as we know !
– quesion what will “any” in the statement mean… other question as we know
– all other Q&A were new and not present in the Dumps
– snmp 16 What does the 16 in this example mean

meaning the not known questions were…
– about uRPF (I gues 2 Questions)
– question about enable or disable split horizon but different to our examples listed in Dexter or China Dump
– question about “loose mode“ , other as we know !
– quesion what will “any” in the statement mean… other question as we know
– all other Q&A were new and not present in the Dumps
– snmp 16 What does the 16 in this example mea

@next_try
– snmp 16 What does the 16 in this example mean

If it’s “snmp-community CISCO ro 17”, the 17 would represent an access-list. Is that how the question was phrased?

To all who passed the exam recently,

what dumps are currently valid. I read in the forum that Dexter or Chineses are. Are they valid or obsolete?
Thank you very much in advance.

yes that was the command but with snmp ro 16 …. what does the 16 mean ?
I can’t find a good description for that.

That’s the access list number. So it’s still an acl

I’m assuming that was one of the probable answers?

Hello,

I passed route exam today with score 8xx/1000. There was some new questions mainly from Ipv6 part (NAT64/EIGRP) but it is only rephrase of existing questions. Sims/labs are the same. I had PBR lab, EIGRP stub lab and EIGRP evaluation sim. All DnD’s which I had is mentioned on forum. If you know the basic concepts and basic principles and you studied explanations you will have no problem with new questions. Only memorizing the answers without understand why is not enough. Use IOU IOS images for simulations and test all things like ipv6 dhcp, snmp, snmp traps, … and you will be fine.

Congratulations @anonymous,

What dumps did you use for your exam?

Thank you.

What dnd did you get anon?

how does evn provide end to end virtualization and separation of data traffic from multiple networks???

Going in for my exam in about an hour. I will update my results afterward. I used china, dexter, digi

Hi my name is Anus. Can provide latest dump here? I want to pass my exam

I am from Turkey my hometown

I failed( few mark less than pass score) last week too, i pretty much got same question what @ next_try had got it. 15/20 question are rephrasing. For, PBr verification you can do sh route map on router where you configured. yes you will see ****** 9 subnet generate. I got low marks on infrastructure service and VPN. I got good score on L2 and infra security. l3 is also medium range score.

@confused, i do not think so we had access-list options for snmp-16, question. i think one is related to 2 direct ospf router connection..and answer is ip address, peer something not really remb exact phrase , but question was asking how pair can connect…i am waiting new update dumps.. what ever we have on discussion is not enough to pass unless you understand deeply all old question. lab and DnD is pretty much same what we discussed here.

Took the exam 02/27/2018, passed on the 3rd attempt. A lot, no… A LOT! of new questions.

Hello , I’m new here ; can someone share the importants file with me?

Thanks

Just passed the exam 8xx/900. There are A LOT of new questions on the test, as well as some that are rephrased. I used Dexter, China, and Digi to pass. If you just are memorizing the answers its going to be tough to pass. I would suggest really brushing up on the material in case you get stuck on something.

Labs were the same, I got EIGRP eval, OSPF Eval, EIGRP STUB. All the same. I got a new DnD involving NAT/NPT.

Good luck all!

What dnd did you get @ccnp_route?

@ CCNP Cali —– you wouldnt happen to share the digi dump would you?

@ CCNP Cali —–Congratulations!!!!!! :-D

For all the people who take exams, lets try to remember the new questions and post them here, so that we can have a pool of the new questions.

Does anyone know what happens if let’s say you pass the ROUTE 2.0 and before you can complete the other exams, cisco changes the version of the CCNP to 3.0?

Would you be forced to retake the ones you may have passed, or just study for the ones you have not yet taken?

@Nickname: I used Dexter, kodo, china and some questions from posts. But you should check the answers because there are a lot of mistakes in dumps. I had a lot of dnd’s but all of them were in dumps except DnD for DHCP server configuration. You can pass the exam with material which is on this forum if you understand the answers. If you only memorize the answers I think that you will not pass it at the moment.

@Hopeful
You have three years from start to finish even if the track changes.

@confuse

This was what i get on 2/24/2017. Lab was pbr/eigrp sim/eigrp simulation all same like digitaltut.

Router:

* Prompts the user for a username and password
* Passes login information to the TACAS+ server

TACACS+

*Authorizes the user
*Authenticates the user

USER

* Provides access credentials
* attemps to access the router

*********************************************************************

FECN : A logical connection comprising two endpoints and a CIR
SVC: A circuit that provides temporary on-demand connections between DTE’s
LMI: A signaling mechanism for Frame Relay devices
PVC: A logical connection comprising two endpoints and a CIR
DLCI: A locally significant ID

**********************************************************************

KEEPALIVE: Used to keep other side if tunnel interface up with local side is up
TUNNEL KEY: Used to authenticate connection.
MSS: Amount of data that a device can handle as unfragmented piece
IPSec: Protocol used to secure connection
mGRE: Protocol to connect multiple destinations

___________________________________________________________

Allows neighboring cisco devices to exchange the management ip address – Address Registration
Enables frame relay to identify interfaces in samme manner as LAN – Global Addressing
Proves most efficient transmission of routing protocol message and – Multicasting
support address resolution.
support devices that are unable to use congestions notifications -Simple flow control
Prevents data from being transmitted in black hole -Virtual Circuit

______________________________________________________________________

This was new, some of i remb are below , i pick key words on other side BUT NOT sure i am right or not.
ip dhcp relay information option
ip dhcp relay information check cheking key words
ip dhcp relay information policy policy key words
ip dhcp relay information trusted-sources

Note: there are too many new MC.

@ CCNP Route
Is this similar to what you seen?

IP DHCP relay information

Check: Validate relay information in BOOTREPLY
Option: Insert relay information in BOOTREQUEST
Policy: Define forwarding Policy
Trust-all: Received DHCP packets may contain realy info option with zero giaddr

Sorry everyone, I honestly got a little nervous once I saw my 5th unrecognized question in a row and couldn’t remember them. My advice is if you’re not confident that you can power through some of these new questions, then I would wait until an updated dump is released. I honestly saw around 15/20 new questions and 1 new DnD.

@CCNP Cail
Did you passed ?

@CCNP Cali
Did you passed ?

@Tomcat, Yes I passed

@Natan
Re: Which BGP option is required when load sharing over multiple equal-bandwidth parallel links from a single CE router to a single ISP router over eBGP?

B is the correct answer. The topology on your example does not match the question, take a look at this one: https://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/13762-40.html#anc2

Quick Question
Which cisco Express Forwarding components contain forwarding information?

Answer is (FIB) or ( FIB, adjaceny table ).

@Soybert still, you are using ebgp-multihop command for different purpose. In your link it was clearly:
!— You must configure ebgp-multihop whenever the eBGP connections are not on the same network address.

and after command maximum-path 2

!— This command specifies the maximum number of paths

so after all eBGP Multipath option more preferable.

I have fail exam in morning today.
Score768!

I’ve seen new D&D 2, and new 10Q
New D&D
1.DHCP Information
New Q
1.BGP 3 Router topology
2.Flame relay dhci topology
3.Route filtering and DHCP

I’never give up!
Let’go fighting in exam next week!

@firePOWDER
Can you give us more info on the DHCP information along with the other questions. Anything would help.
Thanks!

@FirePOWDER

you don’t recall the new questions?

how about the rest? are those covered before?

@ FirePOWDER
Can you please clarify?

D&D:
DHCP Information – IPv4 or IPv6?

Tnx

@Viper,Mahdi,weee

ip dhcp relay information check – About…for ISP
ip dhcp relay global interface – not remember
ip dhcp relay information option subscriber-id – not remember

—————-
About…for ISP
not remember
not remember

I’m sorry

Q. What would you configure on snmpv3 to allow authentication
A. Authpriv
B. authnopriv
C. noauthnopriv
D. authmember
Answer: B or A???????

can any one answer???????

@FirePOWDER
LAB ?
EIGRP STUB
EIGRP and OSPF Redistribution
PBR

@SW
B is a correct answer

@SonicRS

LAB
1.Eigrp stub
2.Eigrp Eva
3.PBR

Good luck

@FirePOWDER
tnx

@FirePOWDER

can u remember the DnD Question?

plz valid dump ccnp switch 300-115

@Zoto what about the new questions?

@Zoto Can you tell us about the new questions?

http://chen-academy.com/edukn/certificates/ccnp-route-300-101/

Dump with explanation.

hello