Share your ROUTE v2.0 Experience

Planning to do the exam during the next two weeks
i am seeing a lot of dumps here but need to know which are the valid one

somebody to help me with this DND

left options
*1- Global Addressing
*2- Address Registration
*3- Virtual Circuit
*4- Simple flow control
*5- Multicasting

Right options:

* A- Allows neighboring cisco devices to exchange the management ip address
* B- Enables frame relay to identify interfaces in samme manner as LAN
* C- Proves most efficient transmission of routing protocol message and
support address resolution.
* D- support devices that are unable to use congestions notifications
* E- Prevents data from being transmitted in black hole

ans ;?

@ all : We are 100% that there are not valid dumb yet as per more than of 50% are new questions. so we are trying to get the new info from the engineers that alredy took the exam.
however there are some dumbs that you can use to study.

@ Anonymous I will try to put in order all the questions that I get from previous Tut users.

@ ordonez could you please check if the questions posted in this link were in the your exam:

https://mega.nz/#!G7xyjBCD!x0MmFSLk3PA2z_iCFnVxXinFb6XoqYhdHUeqk1WH65c

*1- Global Addressing B- Enables frame relay to identify interfaces in same manner as LAN
*2- Address Registration A- Allows neighboring cisco devices to exchange the management ip address

*3- Virtual Circuit E- Prevents data from being transmitted in black hole
*4- Simple flow control D- support devices that are unable to use congestion notifications

*5- Multicasting C- Proves most efficient transmission of routing protocol message and
support address resolution.

left options
*1- Global Addressing
*2- Address Registration
*3- Virtual Circuit
*4- Simple flow control
*5- Multicasting

Right options:

* A- Allows neighboring cisco devices to exchange the management ip address
* B- Enables frame relay to identify interfaces in samme manner as LAN
* C- Proves most efficient transmission of routing protocol message and
support address resolution.
* D- support devices that are unable to use congestions notifications
* E- Prevents data from being transmitted in black hole

Answer:

1 B
2 A
3 E
4 D
5 C

******************************************************************

IPV6 Traffic Filtering

* It supports tagged ACLs
* It filters traffic at the interface level

IPV6 access classes

* It requires the destination address of the inbound traffic to be
a local address.
* It filters management traffic.
* It controls traffic to and from the router

*******************************************************************

Router:

* Prompts the user for a username and password
* Passes login information to the TACAS+ server

TACACS+

*Authorizes the user
*Authenticates the user

USER

* Provides access credentials
* attemps to access the router

*********************************************************************

FECN : A logical connection comprising two endpoints and a CIR
SVC: A circuit that provides temporary on-demand connections between DTE’s
LMI: A signaling mechanism for Frame Relay devices
PVC: A logical connection comprising two endpoints and a CIR
DLCI: A locally significant ID

**********************************************************************

KEEPALIVE: Used to keep other side if tunnel interface up with local side is up
TUNNEL KEY: Used to authenticate connection.
MSS: Amount of data that a device can handle as unfragmented piece
IPSec: Protocol used to secure connection
mGRE: Protocol to connect multiple destinations

**********************************************************************

mGRE: Multi tunnel endpoint
NHRP: Protocol
Hub: Next-hop server
Spoke: Device dynamic address

********************************************************************

PADI: Signal sent by host to remote devices
PADO: Signal sent by remote device back to host
PADR: Unicast signal sent by host to remote device
PADS: Unicast Signal sent by remote device back to host
PADT: Singal is sent to terminate

Anyone have the frame relay configuration answers? Or at least the options?

Hi i failed today with score 653. D&D and Lab and MCQs got over 50% change. Sorry i could not recall as i totally blackout. I only memorized Dexter and EON dumps.

@ CCNP fail fail fail
Could you check above document provided by @jbalvin

Hi guys. Just want to clear one question. In all dumps:
When unicast reverse path forwarding is configured on an inteface, which action does the interface take first when it receives the packet?
A. It verifies that the source has a valid VEF adjacency.
B. It checks the egress access lists.
C. It verifies a reverse path via the FIB to the source.
D. It checks the ingress access lists.

Correct answer is A.

Pretty sure that correct is D. First of all it is obvious, and secondly – https://www.cisco.com/c/en/us/td/docs/ios/12_2/security/configuration/guide/fsecur_c/scfrpf.html#wp1000928

Annon yes i did and it appeared in my exam. @comm stop spamming with all these. screw you wasted my money all outdated!

hi ,
i’ve checked netflow question about second export destiantion :
I’ve found cisco explanation and the right answer in my opinion is “specify a different port”

here the cisco description :
The most common use of the multiple-destination feature is to send the NetFlow cache entries to two different destinations for redundancy. Therefore, in most cases the second destination IP address is not the same as the first IP address. The port numbers can be the same when you are configuring two unique destination IP addresses. If you want to configure both instances of the command to use the same destination IP address, you must use unique port numbers. You receive a warning message when you configure the two instances of the command with the same IP address. The warning message is, “%Warning: Second destination address is the same as previous address “.

Thanks for the chinese dumps

peterhammill, I am so confused with this question… The correct answer is to use a different UDP port?

And there was one more question
It had Satax# as the hostname of the router
Do any one know question and answer for this ? ?
It was similar like this
A.Satax#
B.Satax#
C.Satax#
D.Satax#
E.Satax#

Also this question:
What are characteristics of PAP and CHAP? (choose two)
A. PAP provides a challenge to the client
B. CHAP provides a challenge to the client
C. PAP can be used by TACACS+ to verify access credentials
D. PAP requires a username and optional password
E. CHAP requires a username and optional password
In some dumps you may see other answers marked as correct, but B and C are correct for sure.
Correct Answer: BC

https://www.cisco.com/c/en/us/support/docs/security-vpn/terminal-access-controller-access-control-system-tacacs-/13864-tacacs-pppdebug.html#samplepap

CCNP fail fail fail, “D&D and Lab and MCQs got over 50% change”

Did u have new LAB?

to asdf , yes we have to set a different port . the vrf is only an optional config.

to clarify the DnD and Labs…
Which DnD and Labs will show up in the exam?

Hi Guys,

does anyone have Lab Sim files for practice

In the morning I took the exam and got fail with 6×3. Totally disappointed. Will updated you as I remember. Now Im not in good mood. (south asia).

GUYS There are people who are taking dumps from here and reselling it please be careful i was really dump to believe them anyway plz share updated dumps and if u have Simulation in GNS3 please share

GOD BLESS U ALL

please share if anyone has GNS3 /Packet tracker lab files. thx

hello,

Is there any valid dumps?

hello everyone
I think there is no valid dumps here. Right?
Everyone says %50 new question but they passed exam. I am confused about it.
Please, dont share commercial or wa t s ap link

@Natan

I agree, your answer seems correct.

@Peterhammil

Multiple NetFlow Export Destinations on an Aggregation Cache Example
The following example, enables the exporting of information from the NetFlow aggregation cache:

ip flow-aggregation cache destination-prefix
export destination 10.0.101.254 9991
export destination 10.0.101.254 1999

*******************************************************

sage Guidelines
To configure multiple NetFlow export destinations to a router, enter the ip flow-export destination command twice, once for each destination. Do not enter the same ip address twice. However, entering two different ip addresses with the same udp port number is configurable.

There is a lot of information in a NetFlow cache entry. When NetFlow is enabled with the ip route-cache flow command, you can use the ip flow-export destination command to configure the router to export the flow cache entry to a workstation when a flow expires. This feature can be useful for purposes of statistics, billing, and security.

Version 5 format includes the source and destination AS addresses, source and destination prefix masks, and a sequence number. Because this change may appear on your router as a maintenance release, support for version 1 format is maintained with the version 1 keyword.

For more information on version 1 and version 5 data format, refer to the “NetFlow Data Format” section in “Configuring NetFlow Switching” chapter of the Cisco IOS Switching Services Configuration Guide.

Examples
The following example configures the router to export he NetFlow cache entry to multiple export destinations:

ip flow-export destination 10.42.42.1 9991
ip flow-export destination 10.0.101.254 9991

*********************************

https://www.cisco.com/c/en/us/td/docs/ios/12_0s/feature/guide/12s_mdnf.html#wp1021596

Please those who has taken the exam already recently give us some hints share ur experience for me I studied well then I went through Dexter Dump which da PDF file contains around 248 pages

@ll : I had a chance to view some different dumps like …pass4sure, prep4sure, Certbus, lead2pass, marks4sure but all are outdated, meaning we have all questions in dexter and china dumbs available and many more which are posted yet.
If someone is able to prepare a new VCE file with our already posted questions then we are more up2date as the other buyable dumps….

Hi guys just passed today with exactly the passing mark. Studied dexter and chinese dump for me i got 70% from there. some pointers below:
Labs: EIGRP Eval (same), OSPF Eval (same), EIGRP Stub (same)
30%: New Questions around 15-20q (i will try to remember all of them and post it here) but if you study real hard you may pass the exam.

Good luck to all! :)

Lets see. There were total of 53 questions. Around 3 DnD, 1 Labs, 2 OSPF and EIGRP eluatoins. Most of questions are new and there were some old once which were included in Dexter dump and EON dump. Both I studied. But as I checked later some of new questions were there in new china dump which was updated on 06th February 2018. It has total of 490 questions. I didn’t studied it well and if I was, for sure I could be able to pass the exam. Guys still who didn’t took the exam, please check it.

I will mention few quations as I remember.
DnD,
AAA.
Fream Relay.
DLCI DnD.

Labs,
EIGRP Stub .
really don’t remember whether there was 2 Labs or 1 (should be only 1 Lab only).
(I think I messed this up. I typed ip summary-address 123 10.2.0.0 255.240.0.0, and it should be 255.255.0.0. But I got 2 10.0.0.0 subnets in R3).

Evaluation,
OSPF (5 sub quations) same as digitaltut.
EIGRP (5 sub quations) same as digitaltut.

Lot of NTP quations were there, EVN, DHCP V6, NAT, CEF, VRF aslo.

I have uploaded questions that I got in this exam. Those are from china dump. (Why I didn’t studies it).
s://drive.google.com/open?id=1tuJEE14X0_xKu-3Nhrf8V4tlS_8xCt4S

Final words. It spent $300 exam, $29 exxm cxxxxxxxn premium dump (totally use less, dont buy it), $42 VCE player, $12 ditaltut premium. But after spending that much of money I couldn’t do it. Exam is getting tough day by day. It can’t pass only with dumps and need to properly go trough concepts.

Hope this would help.

TT
All question u hv updated all of it in DEXTER DUMPS GUYS PLZ Don’t memorize after u study well go through the dumps some question in Dumps is incorrect so read the answer if u hv a doubt gooooogle it

@DLO, congratulations! :)

Please write us the new questions that you remember.

Dear all,

Could you verify this file:
https://u file.io/x5ihd
I gather all last question on the forum and try to answer

Dear all,

Could you verify this file:
h ttps://u file.io/ x5ihd
I gather all last question on the forum and try to answer

@Arlond
Q.22 Router#show ntp associations

address ref clock st when poll reach delay offset disp
~172.31.32.2 172.31.32.1 5 29 1024 377 4.2 -8.59 1.6
+~192.168.13.33 192.168.1.111 4 69 128 377 4.1 3.48 2.3
#~192.168.13.57 192.168.1.111 3 32 128 376 7.9 11.18 3.6
* master (synced), # master (unsynced), + selected, – candidate, ~ configured

Which of the following is true

A. Master is syncing and exchanging NTP packets successfully
B. Master is not syncing but exchanging NTP packets successfully
C. Master is not syncing and not exchanging NTP packets
Answer: B Yours was C

What Does a Pound Sign Indicate?
A pound sign (#) displayed next to a configured peer in the show ntp associations command output indicates that the router isn’t syncing with the peer even though NTP request and response packets are being exchanged.
https://www.cisco.com/c/en/us/support/docs/ios-nx-os-software/ios-software-releases-110/15171-ntpassoc.html

Hi my name is Anus. Please post latest dumps here I want to pass please.

@Darezy look careful you have 376 not 377

Please analyse my last file and provide any feedback if this document is helpful.

Hi just a question regarding … which two protocols are required for DMVPN ?

In the china dump we have the answer
IPsec
PPTP
OpenVPN
mGRE <<<<<<<
NHRP <<<<<<

but on the Cisco Site i found this one…
GRE tunnel keepalives (that is, the keepalive command under a GRE interface) are not supported on point-to-point or multipoint GRE tunnels in a DMVPN network

so could it be rather IPsec ?

@Alexa you know how work DMVPN ?
I’m sure the answer mgre and nhrp is correct

@annon thanks

I am planning to take exam next week. I have referred the questions from premium membership and now looking at China dumps.

Should this be enough to pass the exam?

I do not want to waste 300$

@LOR
I’m going to exam in 2 weeks, I did reschedule that 2 times, too many confusing comments about new questions, I’m premium member too, I believe If we understand dexter and Chinese dump, we will pass the exam

Just a heads up. The answer for this question seems to be wrong everywhere, but on Digitaltut…

Refer to the exhibit. How can you configure a second export destination for IP address 192.168.10.1?

configure terminal
ip flow-export destination 192.168.10.1 9991
ip flow-export version 9

A. Specify a different TCP port
B. Specify a different UDP port
C. Specify a VRF
D. Configure a version 5 flow-export to the same destination
E. Specify a different flow ID

Answer is B (not C)

@Tomcat, @BlueH, is it worth it to be a digitaltut member? Did it contain the same questions as in Dexter & Chinese dumps?

@asdf

I use it to get hands on simulator training for the sims. It has most of the questions that are on the Dexter dumps, but you will see a few more. It also provides explanations for a lot of the questions you may not see on dumps and tutorials for key concepts to help you better prepare.

@asdf
most questions are same between two dumps, but I’m happy with premium membership, it makes me feel more confident about the exam, because of test environment and Sim Lab

How to become the premium member? I can see any link to create accout

@Dareezy
top right on corner sing in