Share your ROUTE v2.0 Experience

@Viper

Thanks! The BGP one wasn’t exactly like that. I’m still trying to find.

Hi @Sco….have you read all the previous comment for this week ? i think you will find all the question there..

Hi everyone! does anybody have cbtnuggets for ROUTE? I just passed CCNA the other day.. I am hoping for your inputs so that I can start my CCNP journey… thank you!

@Sco – I’m not familiar with the CEF drag n drop. Has anyone seen that one in a dump?

h ttps:// www. 4shar ed.com /office/C We FDnYJca/300-101.html

Could you verify this above dumps ?
I see a few questions which I have not seen before in any dump.
Look at the questions from 53 and down.
Maybe someone who recently took the exam will find something new?

i failed today route exam :(
many were new questions
drag and drop were all new nothing form the dumps

please anyone can provide me updated dumps

im sorry to hear that @Waz, what was your score and is there anything else you remember from the exam?

Waz im really sory for your exam.
Could you provide us any new thinks about your exam ? topics dnd ? MCQ anything ?

@Waz…what dump did you use ?

i scored 760
i remember they were new exibit and DND and also new route questions and addressing questions new ospf questions which are not available in dumps.
as they were many new questions

don’t blindly go by dumps and give your exam
need updated dumps

https:// www .4shared.com/office/CWeFDnYJca/300-101. html
https:// mega.nz/# F!tNtkSB5A!4Glpa9BrYDbAcAPsbtmDjA
https:// anonfile. com/ w8I5C7dfb3/practice_quiz.txt

Chinesse
https:// anonfile.com/ff44D2d8b9/ CCNP_300-101V2.02018.02.06 .pdf
@Waz take a look on all of these links and share if you saw these questions in you exam.

thanks sure i will look into in and let you know

below are not updated
please dont give your exams based on these below dumps
https:// www .4shared.com/office/CWeFDnYJca/300-101. html
https:// mega.nz/# F!tNtkSB5A!4Glpa9BrYDbAcAPsbtmDjA
https:// anonfile. com/ w8I5C7dfb3/practice_quiz.txt

below is not opening can you check again and send
Chinesse
https:// anonfile.com/ff44D2d8b9/ CCNP_300-101V2.02018.02.06 .pdf

Hi to all,

I know that the new 300-101 exam changed in January of 2015. Cisco, normally, keeps its exams for 3 years, so, it should change again at the beginning of this year 2018.
Does anyone know or have heard or seen anything about the change of this test?

Thanks in advance.

it is very painful when we prepare prepare prepare and and the end it shows we are sorry you have failed. I have passed switch in second attempt. Now i am very scared to go for route after reading these all comments. please please please share a link with latest dumps and questions so i can register after 10 days from today. I will be very thankful to you.

Chinases :

https://mega.nz/#!yiB3QTAK!qSfN_28zlrhlmHVfFBVT7_cCDQQo2u1SaK4Df_5SzRU

whitout key
https://mega.nz/#!yiB3QTAK

@Waz Check the previous link and also this new one
https://mega.nz/#!G7xyjBCD

that is some questions that I recolected from other engineers that took the exam please help me to clarify also we can try to creat dump recolecting the information from people that already took the exam.

Mybad this without password
https://mega.nz/#!G7xyjBCD!x0MmFSLk3PA2z_iCFnVxXinFb6XoqYhdHUeqk1WH65c

https://mega.nz/#!yiB3QTAK!qSfN_28zlrhlmHVfFBVT7_cCDQQo2u1SaK4Df_5SzRU

@jvalvin the last file you shared here is valid?

@jvalvin the last file you shared here is valid or no

Hi quick question, Ihm a little bit confused about different answers below, can someone let me know what the correct answer is please ?!

A network engineer is disabling split horizon on a point-to-multipoint interface that is running
RIPng. Under which configuration mode can split horizon be disabled?
A. router(config-riping)#
B. router(config-rtr)#
C. router(config-if)#
D. router(config)#
China_Dump : Correct Answer: B
In another Dump : the correct Answer is : D
And on a Cisco Page I found this …
no ip split-horizon
Example:
Router(config-if)# no ip split-horizon
So should be Answer : C
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_rip/configuration/15-sy/bsm-15-sy-book.pdf

Alexa, B is correct.

Router(config)# ipv6 router rip cisco
Router(config-rtr)# no split-horizon

@Alexa

A network engineer is disabling split horizon on a point-to-multipoint interface that is running
RIPng. Under which configuration mode can split horizon be disabled?
A. router(config-riping)#
B. router(config-rtr)#
C. router(config-if)#
D. router(config)#
China_Dump : Correct Answer: B
In another Dump : the correct Answer is : D
And on a Cisco Page I found this …

====> In RIPv1/v2 split-horizon is disabled at the interface level;
==========================================
EXAMPLE:
———–
interface Serial0/0
encapsulation frame-relay
no ip slit-horizon
…
!

====> In RIPng (RIP for IPv6) split-horizon is disabled at router config level;
==========================================
EXAMPLE:
———–
Router(config)# ipv6 router rip RIPng
Router(config-rtr)# no split-horizon

Ah okey got it ! Thank you…I need to check more carefully ;)

regarding the Chinesse pdf file is someone able to create a vce file ?

Alexa, but the Chinese dump does not seem to be valid, or is it?

regarding the chinese dump : this fail was previusly shared by a tut user , he mentioned that he studied from here he found that some new questions were ther however that file doesn’t have all the new questions for that reason is that I’m trying to get the new questions from the people that already took the exam.

the only guys that can confirm which questions appear there are those who took the exam.
like @waz or scr or ordonez

other tip here if you are able to response other questions that you have never seen is probably that you can reply the new ones

correct me if I am wrong

Which three IP SLA performance metrics can you use to monitor enterprise-class
networks? (Choose three.)
A. Packet loss
B. Delay
C. bandwidth
D. Connectivity
E. Reliability
F. traps

Ans ?

QUESTION 159
An engineer is using a network sniffer to troubleshoot DHCPv6 between a router and
hosts on the
LAN with the following configuration:
Interface Ethernet0
Ipv6 dhcp server DHCPSERVERPOOL rapid-commit
!
Which two DHCPv6 messages will appear in the snifer logs?
A. reply
B. request
C. advertise
D. acknowledge
E. solicit
F. accept

DHCPv6 can obtain configuration parameters from a server though rapid two-way message
exchange.Which two steps are involved in this process?
(choose two)
A. advertise
B. solicit
C. reply
D. request
E. auth
Correct Answer: BC

I take my exam this coming Friday…I’m so damn nervous about it.

@waz or scr or ordonez – Kindly let us know, if chinese dumps are valid

I don’t think you’re going to find any valid dump right now…

im checking the above dumps i will let you guys know if they are valid

I think the Chinese dump may be the closest.

@jbalvin it is asking for key
https://mega.nz/#!yiB3QTAK

https://mega.nz/#!G7xyjBCD

In real exam is 30% new questions, dumps are still valid exept new ones which came up last 1-2 weeks

some ppl mentioned few in last pages

Dear All

Go through below file questions along with any or chinese Dumps you will pass surely because below file contains most of the new questions ALL THE BEST

https://mega.nz/#!G7xyjBCD!x0MmFSLk3PA2z_iCFnVxXinFb6XoqYhdHUeqk1WH65c

but someone could arrange and give proper correct answers for this questions for easy learning..

some of you are asking questions for absolutely basic topics. Learn first and then go for dumps to check how Cisco is asking questions.

In exam is few new questions and these are not in chineese dumps, btw

The link:
https://mega.nz/#!G7xyjBCD!x0MmFSLk3PA2z_iCFnVxXinFb6XoqYhdHUeqk1WH65c

this link was made by Users tut that share their exams so we need to create a new file where we can see the question in order and where other users can poste the new questions.

somebody that can create a vce file

I could clean this up and make a VCE for sure.

I have the latest certbus vce and pdf if anyone is interested… although it’s much of the same.

@waz, what drag n drops did you get?

I will take the exam this March, preparing for it already.

Do someone know answers for below questions
And answer them correctly

someone want’s to clarify the FR config ?
1.DND question in the exam show Frame Relay configuración in drag and drop boxes

interface —–Space Blank —— Serial0/3/1
banwith 56
space Blank —encapsulation frame-relay
space Blank—- ip address
no shutdown

Space BlanK —interface Serial0/3/1.2 point-to-point
Space BlanK –ip address 10.17.0.1 255.255.255.0
Space BlanK –frame-relay interface-dlci 100

clock rate 2000000
shutdown

2.A diagram with 3 routers:
+ H1 (with IPv6 IP and Loopback 1.1.1.1)
+ R1 (with IP IPv6 and Loopback 2.2.2.2)
+ R2 (with IP IPv6 and Loopback 3.3.3.3)

A. H1(config t)#router eigrp 100
H1(config t)#no stub only
B. R2(config t)#router eigrp 100
R2(config t)#no stub receive only
C. H1(config t)#ipv6 router eigrp 100
H1(config t)#no stub only
D. R2(config t)#ipv6 router eigrp 100
R2(config t)#no stub only

3.Router#show ntp associations

address ref clock st when poll reach delay offset disp
~172.31.32.2 172.31.32.1 5 29 1024 377 4.2 -8.59 1.6
+~192.168.13.33 192.168.1.111 4 69 128 377 4.1 3.48 2.3
*~192.168.13.57 192.168.1.111 3 32 128 377 7.9 11.18 3.6
* master (synced), # master (unsynced), + selected, – candidate, ~ configured
Which of the following is true

A. Master is syncing and exchanging NTP packets successfully
B. Master is not syncing but exchanging NTP packets successfully
C. Master is not syncing and not exchanging NTP packets

4.What Authentication does EIGRP use? (2 choices)
A. TKIP
B. MD5
C. Plain Text
D. WPA

5.Network Next Hop Metric LocPrf Weight Path
*>i 10.1.1.0/24 192.168.1.2 0 0 0 10000 i
*>i 10.2.2.0/24 192.168.3.2 0 0 0 10000 i
*>i 172.17.1.0/24 10.0.0.1 0 0 0 32768 i

A. 10.0.0.1
B. 192.168.1.2
C. 10.0.0.2
D. 192.168.3.2

6.logging console 7. Which is true ?
A. you can see debug if you’re connected in SSH
B. High CPU utilization
C. …

7.How can you mitigate fragmentation issues between endpoints separated by a GRE tunnel? < (they changed it, they added GRE)
A. PMTU
B. TCP MSS
C. windowing
D. ICMP DF bit

8.Which cisco Express Forwarding component(s) contain forwarding information? (forwarding information, they changed it)
A. FIB, adjacency table
B. adjacency table.
C. FIB, RIB , Adjanceny table
D. FIB
E. RIB

DND about

## Frame-Relay ###
+ SVC: A circuit that provides temporary on-demand connections between DTEs
+ LMI: A signaling mechanism for Frame Relay devices
+ DLCI: A locally significant ID
+ FECN: An indicator of congestion on the network
+ PVC: A logical connection comprising two endpoints and a CIR

### ACL ###
reflexive – must be named
standard – range 1300-1399
extended – telnet …
time-based – access to device at certain times
dynamic – closest to device

###about Authentications
f-needed – Does not authenticate if the user has already been authenticated on a tty line.
krb5 – Uses Kerberos 5 for authentication (can be used only for Password Authentication Protocol [PAP] authentication)
local – Uses the local username database for authentication.
none- Uses no authentication.
group radius – Uses the list of all RADIUS servers for authentication.
group tacacs+ – Uses the list of all TACACS+ servers for authentication.
group group-name – Uses a subset of RADIUS or TACACS+ servers for authentication as defined by the aaa group server radius or aaa group server tacacs+ command.

above questions 1 (D&D) and 5 are different on exam

btw I am different anonymous lol

What 5 different D&D Could you saw?