Share your ROUTE v2.0 Experience

Any one passed the exam these days by studying dexter dump?

The consensus lately is that Dexter is 40-50% accurate… if you know the stuff and use dexter to supplement, you should be good.

Does anyone have the pdf version of the dump from the Chinese site that @easy mentioned on the previous page?

the question @easy:

trap Snmp 2c 10 and then something
question was- what does that 10 means?
a. ACL that is applied
b. community string
c. It would be public (Don’t remember exactly)

B is correct?

@firday….trap Snmp 2c access 10 …. i remember there is an “access” before “10”..CMIMW

@masmen @easy
and….what does that 10 means, I dont know

@Zukish,
The PDF is included in the file.
@friday, I have no idea, search for the meaning… I chose a, but it was my guess,
as I said, you should learn how to config snmp if you want to be able to answer all of the snmp questions.

thanks, is that without having the complete statement it is difficult to know the answer.
@easy congratulations for the approved. leave the pdf? where? I can not download it

@ Friday

I guess it should be access list. Have look below

This example shows how to assign the string comaccess to SNMP, to allow read-only access, and to specify that IP access list 4 can use the community string to gain access to the switch SNMP agent:

Switch(config)# snmp-server community comaccess ro 4

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750/software/release/12-2_52_se/configuration/guide/3750scg/swsnmp.html

@SRK true, thanks.

someone who has done the exam with DMVPN d&d? My exam is tomorrow

I do not know with which button I can download this file from the Chinese portal … :( Could someone have downloaded it?

lmaooo I thought that I was the only one.

@ easy could you share the PDF here??? or anyone else who could download it.

@easy, where is the link that you shared? i’ve backed read and never seen the link. can you please share?

Guys share new questions, atleast try to remember from what sections are those new questions and how many are they,and what labs are on the exam???

A diagram with 3 routers:
+ H1 (with IPv6 IP and Loopback 1.1.1.1)
+ R1 (with IP IPv6 and Loopback 2.2.2.2)
+ R2 (with IP IPv6 and Loopback 3.3.3.3)

A. H1(config t)#router eigrp 100
H1(config t)#no stub only
B. R2(config t)#router eigrp 100
R2(config t)#no stub receive only
C. H1(config t)#ipv6 router eigrp 100
H1(config t)#no stub only
D. R2(config t)#ipv6 router eigrp 100
R2(config t)#no stub only

answer?? B o D.

It’s IPv6, really?

Hi guys. I have passed my exam today with 8xx. Materials I studied are from Dexter and Ordonez + questions from comments. Unfortunately I got only few questions from these (max 10) ,others were new.
What i can remember: Dnd: AAA, DHCP configuration commands and their effect(new), network conditions + their description(latency, out of order packets,asymetric routing,tcp starvation,excessive unicast flooding), LMI(global addressing,virtual circuit,address registration,simple flow control, multicating)
Simulation: PBR, EIGRP evaluation ,Eigrp stub
I wish good luck all and thanks for provided materials.

Hi dudes, I used the link Easy gave to find the chinese forum which shares questions. I found a new version updated on 140218
https:// pan . baidu . com / s / 1dFxtAIt
passwd : 0jr8
Didnt study the content yet.

my bad its the one of last year… continue with the @Easy one :
https:// pan . baidu . com / s / 1dWuMi6
pwd : jgyt

@shopii, thank you for sharing. is it enough to pass the exam?

thanks @shopii!!

@shopii @friday? do you have english version for this?

@hard is in English. download it and it is a zip with the files in English.

Plase the answer?
ipv4 header itsn has: traffic class, flow label and hop limit…
but dexter dump: B, C, E.

The enterprise network WAN link has been receiving several denial of service attacks from
both IPv4 and IPv6 sources. Which three elements can you use to identify an IPv6 packet
via its header, in order to filter future attacks? (Choose three.)
A. Traffic Class
B. Source address
C. Flow Label
D. Hop Limit
E. Destination Address
F. Fragment Offset

@friday, i’ve tried to unzip and its not in english.

it is english

@Anonymous. it is not english. I promise you, don’t know what happened. I downloaded it twice. The pdf file it is not english also. can you please share me the link?

@M
congratulations
could just tell us which dumps is valid and share it plz ahmed madiboi@ yahoo .com

@M
Congratulations.
Could you see a chainese material share with @Easy ?
Could you provide us any new question ?

@arnold

Q. What would you configure on snmpv3 to allow authentication
A. Authpriv
B. authnopriv
C. noauthnopriv
D. authmember
Answer: A

If the question asks about authentication only . Answer is B
If authentication and encryption. Answer is A

Please if this is wrong pleasy clarify.

How can you download it? The only I can download from this chinese site is a “BaiduNetdisk-5.7.3.exe”, but not the zip… Please help someone!

Hi guys I am writing

tomorrow can anyone give me the link to the latest dumps.

Hey guys, i’m fresh from 300-115 exam, if you plan to write it after route exam i would advice you to wail a little bit because cisco changed the question drastically.

here are the link to 02 06 2018 dump from china

https:// drive. google.com/open?id =1hKXmpQXZJnlRM-vDkJBulmujL8liE54Z

just remove the spaces

@Somebody
Sorry my mistake you are right.
Correct answer will be B.
We must gather all new question and make new dumps.

@ jos b

which scenario can asymmetric routing occur?
A. active/active firewall setup
B. single path in and out of the network.
C. active/standby firewall setup
D. redundant routers running VRRP
Correct Answer: A

I Think that the answer is (D) as digitaltut says

See The Book CCNP Routing and Switching ROUTE 300-101 Official Cert Guide Kevin Wallace (Topic: Asymmetric Routing)

you will find that FHRP (for example, HSRP, VRRP, or GLBP) causes Asymmetric Routing.

And for active/active firewall it is impacted by the asymetric routing but it isn’t the cause of it by itself.

Please verify me if my thoughts is right or wrong

“Which two statements about NHRP in a DMVPN enviroment are true? (Choose two)
A. It routes traffic through the tunnel
B. It provides address resolution to route traffic
C. It can authenticate VPN endpoints
D. It can identify PIM-SM RPs over a tunnel
E. It requires each endpoint to have unique network ID”

B + C or A + B?

how to know if the cisco exam going to change syllabus or obsolete ?
Is there any forecast news that this 300-101 will change in the near future?

Hi everyone,
I’ve collected a question file that recently passed to us colleagues.
Check if everything is ok.
Let them check you what they last passed or if it is a useful dump.

https:// ufile. io / 756cz

@question B C

@arnold thanks.

@arnold in your pdf:

Which option is a prerequisite for stateful NAT64?
A. IPsec for IPv6
B. DNS64
C. Application Level Gateway
D. ICMP64
Answer: B

why is B?

@somebody & @ jos b: Both you’re right the correct answer is “B” !

PLEASE REMOVE / IGNORE MY LAST COMMENT…..IT MUST BE “D” !!!
@somebody & @ jos b: Both you’re right the correct answer is “D” !

Some question which I got today and also I found in chinese dump:
At few cases the answers question were changed or reformulated

What is the NHRP role in DMVPN? (Choose 2)
A. Obtains the next-hop to be used for routing
B. routes the packet through the tunnel
C. identifies the PIM-SM RP used to route the packet
D. It can authenticate VPN endpoints
E. It requires each tunnel endpoint to have an unique network ID
Correct Answer: AD

Which encapsulation supports an interface that is configured for an EVN trunk?
A. 802.1Q
B. ISL
C. PPP
D. Frame Relay
E. MPLS
F. HDLC
Correct Answer: A

Which two functionalities are specific to stateless NAT64? (Choose two.)
–> there were different possible answers then in Dexter.I cant remember.

Which of these provides encryption?(or something like)
A. authPriv
B. authNoPriv
C. NoAuthNoPriv
D. NoAuthNoEgress

Which value does GRE tunnel use to identify the end points or destination
A. IP ADDRESS
B. MAC ADDRESS
C. DLCI
D. TUNNEL
Correct Answer: A

There was a scenario hub and two spokes.EIGRP 100.The question was what happens if the split horizont will be disabled on hub?
A. routing loop
B. spoke1 and spoke2 will receive updates from each others about connected networks
.
.

Which two commands would be used to troubleshoot high memory usage for a process?(Choose two.)
A. router#show memory allocating-process table
B. router#show memory summary
C. router#show memory dead
D. router#show memory events
E. router#show memory processor statistics
Correct Answer: AB

Which three items can you track when you use two time stamps with IP SLAs? (Choose three.)
A. delay
B. jitter
C. packet loss
D. load
E. throughput
F. path
Correct Answer: ABC

A network engineer has set up VRF-Lite on two routers where all the interfaces are in the same VRF. At a
later time, a new loopback is added to Router 1, but it cannot ping any of the existing interfaces. Which two
configurations enable the local or remote router to ping the loopback from any existing interface? (Choose
two.)
A. adding a static route for the VRF that points to the global route table
B. adding the loopback to the VRF
C. adding dynamic routing between the two routers and advertising the loopback
D. adding the IP address of the loopback to the export route targets for the VRF
E. adding a static route for the VRF that points to the loopback interface
F. adding all interfaces to the global and VRF routing tables
Correct Answer: AB

Which statement about dual stack is true?
A. Dual stack translates IPv6 addresses to IPv4 addresses
B. Dual stack means that devices are able to run IPv4 and IPv6 in parallel.
C. Dual stack translates IPv4 addresses to IPv6 addresses
D. Dual stack changes the IP addresses on hosts from IPv4 to IPv6 automatically

Which option prevents routing updates from being sent to the DHCP router, while still allowing routing
update messages to flow to the Internet router and the distribution switches?
A. DHCP(config-router)# passive-interface default
DHCP(config-router)# no passiveinterface Gi1/0
Internet(config-router)# passive-interface Gi0/1
Internet (config-router)#passive-interface Gi0/2
B. Core(config-router)# passive-interface Gi0/0
Core(config-router)# passive-interface Gi3/1
Core(config-router)# passive-interface Gi3/2
DHCP(config-router)# no passiveinterface Gi1/0
C. Core(config-router)# passive-interface default
Core(config-router)# no passive-interface Gi0/0
Core(config-router)# no passive-interface Gi3/1
Core(config-router)# no passiveinterface Gi3/2
D. Internet(config-router)# passive-interface default
Core(config-router)# passive-interface default
DSW1(config-router)# passive-interface default
DSW2(config-router)# passiveinterface default

THE POTENTIAL ANSWERS WERE CHANGED!!! They used ACLs and ipv6 traffic filter instead of passive interface commands.

QUESTION 111
Refer to the exhibit. After configuring GRE between two routers running OSPF that are connected to each
other via a WAN link, a network engineer notices that the two routers cannot establish the GRE tunnel to
begin the exchange of routing updates. What is the reason for this?

POTENTIAL ANSWERS CHANGED

QUESTION 147
Which three IP SLA performance metrics can you use to monitor enterprise-class
networks? (Choose
three.)
A. Packet loss
B. Delay
C. bandwidth
D. Connectivity
E. Reliability
F. traps

QUESTION 159
An engineer is using a network sniffer to troubleshoot DHCPv6 between a router and
hosts on the
LAN with the following configuration:
Interface Ethernet0
Ipv6 dhcp server DHCPSERVERPOOL rapid-commit
!
Which two DHCPv6 messages will appear in the snifer logs?
A. reply
B. request
C. advertise
D. acknowledge
E. solicit
F. accept

QUESTION 191
A. The source-interface is configured incorrectly.
B. The destination must be 172.30.30.2 for icmp-echo.
C. A route back to the R1 LAN network is missing in R2.
D. The default route has wrong next hop IP address.
E. The threshold value is wrong.
Correct Answer: AC

A network engineer enables OSPF on a Frame Relay WAN connection to various remote sites, but no
OSPF adjacencies come up. Which two actions are possible solutions for this issue? (Choose Two.)
A. Change the network type to point-to-multipoint under WAN interface.
B. Enable virtual links.
C. Change the network type to nonbroadcast multipoint access.
D. Configure the neighbor command under OSPF process for each remote site.
E. Ensure that the OSPF process number matches among all remote sites.
Correct Answer: AD
Refer to Exhibit. Which two reasons for IP SLA tracking failure are likely true? (Choose Two.)

Which two phases of DMPVN allow the spoke site to create dynamic tunnels to one other
(Choose two)?
A. Phase 1
B. Phase 2
C. Phase 3
D. Phase 4
E. Phase 5
Correct Answer: BC

QUESTION 205
Which two different configurations can you apply to a device incoming SSH access? (Choose two)
A. ipv6 access-list VTY-ACCESS-IN
secuence 10 deny tcp any any eq 22
sequence 20 permit ipv6 any any
line vty 0 15
ipv6 access-list VTY-ACCESS-IN out
B. ipv6 access-list VTY-ACCESS-IN
secuence 10 deny tcp any any eq 22
sequence 20 permit ipv6 any any
interface Ethernet0/0
ip traffic-filter VTY-ACCESS-IN out
C. ipv6 access-list VTY-ACCESS-IN
secuence 10 deny tcp any any eq 22
sequence 20 permit ipv6 any any
line vty 0 15
ipv6 access-class VTY-ACCESS-IN in
D. ipv6 access-list VTY-ACCESS-IN
secuence 10 deny tcp any any eq 22
sequence 20 permit ipv6 any any
interface Ethernet0/0
ipv6 traffic-filter VTY-ACCESS-IN in
E. ipv6 access-list VTY-ACCESS-IN
secuence 10 deny tcp any any eq 22
sequence 20 permit ipv6 any any
interface Ethernet0/0
ipv6 traffic-filter VTY-ACCESS-IN out
Correct Answer: CD

DHCPv6 can obtain configuration parameters from a server though rapid two-way message
exchange.Which two steps are involved in this process?
(choose two)
A. advertise
B. solicit
C. reply
D. request
E. auth
Correct Answer: BC

QUESTION 209
A network engineer executes the show ip cache flow command. Wich two types of information are
displayed in the report that is generated? (Choose two)
A. top talkers
B. flow export statistics
C. flow sample for specific protocols
D. MLS flow traffic
E. IP packet distribution
Correct Answer: CE

QUESTION 221
A network engineer enables OSPF on a Frame Relay WAN connecton to various remote stes, but no
OSPF adiacencies come up Which two actions are possible solutions for thisissue? (Choose Two)
A. Change the network type to point-to-murpont under WAN interface
B. Enable virtual Inks
C. Change the networktype to nonbroadcast mutpoint access
D. Configure the neighbor command under OSPF process for each remote site
E. Ensure that the OSPF process number matches among all remote stes
Correct Answer: AD

QUESTION 230 —
DND AAA

QUESTION 251
Which three options are valid DHCPv6 functions? (Choose three.)
A. Server
B. client
C. approver
D. requester
E. requester
F. ACK
G. relay
Correct Answer: ABG

QUESTION 289
Which two statements about EVN are true? (Choose two) — the answers were changed

QUESTION 300 -DND

QUESTION 301
which two statement about GRE tunnel interface are true?(choose two) –> answers reformulated

QUESTION 303 -DND

QUESTION 305
What are two protocols used for user with authentication on network device?
(OR)
What are two options for authenticating a user who is attempting to access a network device?(Choose two)
A. CHAP
B. Radius
C. 802.1x
D. PAP
E. TACACS+
Correct Answer: BE

What is the default value of TCP maximum segment size?
A. 536
B. 1492
C. 1500
D. 1508
Correct Answer: A

QUESTION 333
What is the command to enable NAT-PT?
A. ipv6 nat
B. ipv6 nat enable
C. ipv6 nat-pt
D. ipv6 nat-pt enable
Correct Answer: A

QUESTION 384
Which two protocols can cause TCP starvation?(choose two)
A. TFTP
B. SNMP
C. SMTP
D. HTTPS
E. FTP
Correct Answer: AB

QUESTION 400
Refer to the Exhibit. Which effect of this configuration is true?
A. R1 synchronizes with systems that include authentication key 5 in their packets.
B. R1 acts as an authoritative clock with a priority ID of 1.
C. R1 acts as an authoritative clock at stratum
D. R1 is the NTP client for a stratum 1 server.
Correct Answer: C

QUESTION 408
which two statements about ip access lists are true?(choose two)
A. They support wildcard masks to limit the address bits to which entries are applied
B. Extended access lists must include port numbers
C. IP access list without at least one deny statement permit all traffic by default

QUESTION 412
Frame Relay LMI autosense. What is is true? (Choose two) –> other formulation of answers
A. Line should be up and protocol should be down
B. Protocol must be up
C. It only works on DTEs
D. It only works on DCEs
Correct Answer: AC

QUESTION 484 –> DND

QUESTION 487–> DND

D. They end with an implicit permit
E. Entries are applied to traffic in the order in which they appear
Correct Answer: AE

Passed today with 9xx, plenty of new questions. I used
300-101 – Digital-Tut + CERTbus + PassLeader /updated by Dexter 23.12.2017 but only 4-5 questions was on exam.
Lab are the same i have OSPF Evaluation Sim, EIGRP Evaluation Sim, Policy Based Routing Sim even values are the same.
Lot of stupid questions with Frame Relay ( very old technology wchich should be removed from exam) and NTP, SNMP. Please focus on those technolgies when you will be trying attempt pass.

Thank you M,could u share that chinese dump?

Thanks m. What sims, simlets and dnd did you get?

@Confused , @BB: read the comments on pages 95, 96 from Easy. He provided the chinese dumps, also posted some new questions what he remembered from test.

Yeah. I have the Chinese dumps. They are great with the explanations. I was just curious what each person received for dnd and sims.

be careful because in chineese dumps is few bad answers in Q and DD

@M

A majority of those questions you just posted are included in the dexter dump and the ordonez. Are you saying that the answers are totally different answers to choose or that they are just rearranged?