Share your ROUTE v2.0 Experience

@johan

please share your dumps and questions that you rember.

Is there an entry for dexter dump valid?

Q:How can you mitigate fragmentation issues between endpoints separated by a GRE tunnel? <= (they changed it, they added GRE)
A. PMTU (the D was not present at the end of the answer)
B. TCP MSS
C. windowing
D. ICMP DF bit (this was a new answer)

Correct Answer: B
https://www.cisco.com/c/en/us/support/docs/ip/generic-routing-encapsulation-gre/25885-pmtud-ipfrag.html

Maybe someone have a dump from pasleader ?
On his website update is from 12.02

So the EON or the Dokdo dump still valid??

EON, Dokdo not vailid anymore.

@Ordonez

Q:Which of these can be used for IPv4 to IPv6 communication? (new question, not sure of the exact phrasing)
A. NAT-PT
B. ISATAP
C. L2 to L3 VPN
D. IPSec

Answer: A or B?

ISATAP is tunneling protocol

So I think answer will be A

Failed CCNP Route today :(. Feeling really bad and depressed.
Did throughly EON,DExter, ORdernz.
I got totally new 2 Drag and Drop

kimm
I know your feeling …
cheer up!!

@ kimm
Sorry about that
Just 2 new Drag and Drop?
any other new questions?

Cheers

@kimm
Do you ready above suggestion from ordonez and zoltam ?
You have another new question ?

@kimm
Sorry for you
Can you tell us what these drag drops talk about (frame relay or aaa or eigrp or….etc)

We need your support

I really don’t understand why people that failed doesn’t share what they got on the test.
I mean, you anyways need to do it again, so why not to share the information of the test to other people that’s preparing.
If you’d pass and continue to other tests I’d understand…

hellllllllllllllo Everyone which dumps is valid

Exactly,tell us how many new questions you got that are not in DEXTER ,EON dumps?

@kimm

Please share your experience.

I had about 20 new ones :(

What about labs?

@kimm
You saw in your exam question about zoltam and ordonez mentioned ?

@kimm
What are the 2 new drag n drops?

@kimm
What are the labs?

@kimm . I really don’t understand why you don’t share what you got on the test.
I mean, you anyways need to do it again, so why not to share the information of the test to other people that’s preparing.

U R1(config)#ip sla 1
R1(config-ip-sla)#icmp-echo 172.20.20.2 source-interface FastEthernet0/0
R1(config-ip-sla-echo)#timeout 5000
R1(config-ip-sla-echo)#frequency 10
R1(config-ip-sla-echo)#threshold 500
R1(config)#ip sla schedule 1 start-time now life forever
R1(config)#track 10 ip sla 1 reachability
R1(config)#ip route 0.0.0.0 0.0.0.0 172.20.20.2 track 10
R1(config)#no ip route 0.0.0.0 0.0.0.0 172.20.20.2
R1(config)#ip route 0.0.0.0 0.0.0.0 172.30.30.2 5
A. The source-interface is configured incorrectly
B. The destination must be 172.30.30.2 for icmp-echo
C. A route back to the R1 LAN network is missing in R2
D. The default route has wrong next hop IP address
E. The threshold value is wrong
Answer: C E
***the ans is A C

Please verify the accuracy of the answers

four DnD? or more DnD?

AAA, FR , FR config , ACL + @ ??

Someone, don’t mind Kimm haha, we can’t get information from him, let’s wait from others.

HI

is dexter dump still valid ? can anyone give me new 15 questions ?

@Anonymous

Don’t spam please,

You are correct, AC but you should also check your threshold is much larger than your timeout then the threshold is wrong.

*************************************

I posted the NTP and that have no answer as I can’t remember the exact info from the NTP associations.

To answer the question, the reach value should be 377.

*************************************

Remember to study the EIGRP Eval Simlet and OSPF Eval Simlet.

Planning to take the exam this month again.

ordonez and Anonymous

You’re spam

Please share any new question.

@Dareezy

Nice link on SLA, Thanks!

hello

someone has given the exam for the second time?
the lab and D & D will be the same?
your help please…

@Viper
NP always

I pass with 8.1 there are to many new question

@Anonymous congrat.
Could you provide any new question if you remember ?

Dear all, I read about TOO many new questions but what are they ??? and why we just keep posting that. For all who passed the exam recently, Congrats from the button of my heart but please at least you could remember one or two new questions and tell us your latest resources as this web is for helping each other. Many thanks in advance.

please i need new dump

what is valid now my exam after tomorrow i’cant reschedule

We
Good luck
Dexter is valid and with some few questions .. don’t, t forget share us your exam experience after tomorrow
Good luck

Sw
Write your email here

Just to recap:

Q:Features of Netflow version 9? (CHOOSE TWO)
A. Cisco proprietary
B. IEEE standard
C. IETF
D. ingress/egress
E. ingress
F. egress
Correct Answer: C-D

How to set up IP SLA to monitor jitter between the certain limits? <= (it’s jitter now, not bandwidth)
A. Timeout (not timer)
B. Frequency
C. Threshold
D. Queue-limit
Correct Answer: c

Q:Which cisco Express Forwarding component(s) contain forwarding information? (forwarding information, they changed it)
A. FIB, adjacency table
B. adjacency table.
C. FIB, RIB , Adjanceny table
D. FIB
E. RIB
Correct Answer: A

Explanation: Cisco Express Forwarding (CEF) switching is a proprietary form of scalable switching intended to tackle the problems associated with demand caching. With CEF switching, the information which is conventionally stored in a route cache is split up over several data structures. The CEF code is able to maintain these data structures in the Gigabit Route Processor (GRP), and also in slave processors such as the line cards in the 12000 routers. The data structures that provide optimized lookup for efficient packet forwarding include:

The Forwarding Information Base (FIB) table – CEF uses a FIB to make IP destination prefix-based switching decisions. The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and these changes are reflected in the FIB. The FIB maintains next-hop address information based on the information in the IP routing table.

Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with switching paths such as fast switching and optimum switching.

Adjacency table – Nodes in the network are said to be adjacent if they can reach each other with a single hop across a link layer. In addition to the FIB, CEF uses adjacency tables to prepend Layer 2 addressing information. The adjacency table maintains Layer 2 next-hop addresses for all FIB entries.

https://www.cisco.com/c/en/us/support/docs/routers/12000-series-routers/47321-ciscoef.html

Q:Which of these can be used for IPv4 to IPv6 communication? (new question, not sure of the exact phrasing)
A. NAT-PT
B. ISATAP
C. L2 to L3 VPN (something like this)
D. IPSec (not sure

Correct Answer: A

NAT-PT Overview
Network Address Translation (NAT)-Port Translation (PT) for Cisco software based on RFC 2766 and RFC 2765 is a migration tool that helps customers transition their IPv4 networks to IPv6 networks. Using a protocol translator between IPv6 and IPv4 allows direct communication between hosts that use different network protocols. You can use static, dynamic, port address translation, IPv4-mapped definitions for NAT-PT operation.

The figure below shows that NAT-PT runs on a device that is configured between an IPv6 network and an IPv4 network that helps connect an IPv6-only node with an IPv4-only node.
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_nat/configuration/15-mt/nat-15-mt-book/ip6-natpt.html

Q:Which command instruct a PPPoE client to obtain its IP address from the PPPoe server?
A. ip address negotiated auto
B. ip address negotiated
C. pppoe enable
D. Ip address DHCP
E. Ip address dynamicv

Correct Answerd: B

Q:where to apply ipv6 traffic filter ? (they actually show you possible configuration commands, in interface, global … modes).
A. interface configuration
B. router configuration
C. global configuration

Correct Answerd: A

this question can be response using a drag and drop traffic-filter vs ACL-filter

here the drag and drop
IPv6 Traffic Filter
+ It filters traffic on the interface level
+ It supports tagged ACLs

IPv6 Access Filter
+ It controls traffic to and from the router
+ It requires the destination address for inbound traffic to be a local address
+ It filters management traffic

Q:Which two statements about IP access-lists are true? (Choose two)
A. IP access-lists without at least one deny statement permit all traffic by default.
B. Extended access-lists must include port numbers.
C. They support wildcard masks to limit the address bits to which entries are applies.
D. Entries are applied to traffic in the order in which they appear.
E. They end with an implicit permit.
Correct Answerd: C – D

Q:Which two configurations can a PPPoE client support? (Choose two)
A. Eight clients are configured on a single CPE.
B. The client is connected to multiple hosts over DMVPN
C. The client is installed on the same network device as the server.
D. The client is connecting over an ATM PVC
E. The client is installed on a native IPv6 network.
Correct Answerd: A-B

Q:Where to configure the DHCPv6 relay IP address for a VLAN
Do you have to enable DHCPv6 relay in the global configuration mode/VLAN interface ?
Do you have to configure something on the VLAN interface/global configurationv

this questions can be response with a drag and drop

+ DHCPv6 Server:
IPv6 address autoconfig
IPv6 enable

+ Client Interface:
IPv6 address
IPv6 DHCP Relay destination

DnD# Router-TACACS-User What Answer is Valid ?
Router
Passes logon information to the TACAS+ server
Prompts the user for username and password
TACACS+ Server
Authenticates the user
Authorises the user
User
Attempts to access the router
Provides access credentials

##### OR #####

Router
Prompts the user for username and password
Passes logon information to the TACAS+ server
TACACS+
Authorises the user
Authenticates the user
User
Provides access credentials
Attempts to access the router

who has DnD questions?

I have Dokdo DnD (Radius, TACACSS+,User)
Router
Prompts the user for username and password
Passes logon information to the TACAS+ server
TACACS+
Authorises the user
Authenticates the user
User
Provides access credentials
Attempts to access the router

@SonicRS
the dnd order does not matter just as long as there in the right category, at least for

pass exam 8xx 2018/2/19 12:00am KOR

thanks zoltam,ordan

@wow pls share dnd question

@cnp18
DnD : FR, FR LMI, DHCPv6, AAA +@

could someone who take exam yesterday share dumps plz

• Address registration – allows neighbouring Cisco devices to exchange the management ip addresses
• Global addressing – Enables Frame Relay to identify interfaces in same manner as LAN
• Multicasting – provides most efficient transmission of routing protocol messages and support address resolution
• Simple flow control – supports devices that are unable to use congestion notification
• Virtual circuit – Prevents data from being transmitted in Black Hole

is this DnD already correct ?