Share your ROUTE v2.0 Experience

Spam, spam, spam

We’re dead…

Q: What Authentication does EIGRP use? (2 choices)

I disagree for C. EIGRP do not support plain text, only MD5 and SHA :

router eigrp 1
authentication mode {hmac-sha-256 | md5}

Hello,

I’ve just passed with 8xx.

I will keep you updated in a few hours. I’ve noted what i remember.

Great Zoltam!

Share us what you remember so that I can reschedule my exam this month

@Sousuke

What Authentication does EIGRP use? (2 choices)

A. TKIP
B. MD5
C. Plain Text
D. WPA

No SHA in the choices and it’s asking you to choose 2.

@ Sousuke

you are rigtht, we are still confuse about the one

EIGRP supports MD5 authentication in Classic (Autonomous System) Mode, and both MD5 and SHA-256 in Multi-AF (Named) Mode. For MD5 authentication in both Classic and Named modes, the key chain is defined globally. The key chain can contain multiple keys, but only the lowest active key number will be exchanged in EIGRP packets. Note that the key ID must match for authentication to occur, because this number is exchanged in the hello packets. In Classic Mode, the authentication is applied at the link level, whereas in Named Mode it is applied at the af-interface mode under the SAFI. In either case, the authentication can be verified as seen below:

@Zoltam

Does this question appeared in your exam?

reouter eigrp 1
redistribute ospf 100
network 10.10.10.0 0.0.0.255
auto-summary
!
router ospf 100
network 172.16.0.0 0.0.255.255 area 10
redistribute eigrp 1

what will happen to the redistributed network from EIGRP to OSPF?

@Zoltam
wow god…. jejus plz update

@Zoltam

Congrats and Thanks, we’re waiting for your updates!

@Ordonez

If i get the question on test, i would only answer B and make a reserve to CISCO in which I explain that there is a mistake in the question (only 1 choise). TKIP, WPA & Plain text are wrong.

@Ordonez
Does this question appeared in your exam?
reouter eigrp 1
redistribute ospf 100
network 10.10.10.0 0.0.0.255
auto-summary
!
router ospf 100
network 172.16.0.0 0.0.255.255 area 10
redistribute eigrp 1
what will happen to the redistributed network from EIGRP to OSPF?

Imo : default metrics are not configured under eigrp.

HEARE Instant DOWNLOAD
20 US$ only

Copy below link

docs.google.com/document/d/1cp2vtCYSV_21JTZF9D14Ua2gHdijtZjfIDuyVT1NyJg/edit?usp=sharing

Drag and drop :

**Frame Relay components**
+ SVC: A circuit that provides temporary on-demand connections between DTEs
+ LMI: A signaling mechanism for Frame Relay devices
+ DLCI: A locally significant ID
+ FECN: An indicator of congestion on the network
+ PVC: A logical connection comprising two endpoints and a CIR

**ACL**
reflexive – must be named
standard – range 1300-1399
extended – telnet …
time-based – access to device at certain times
dynamic – closest to device

**Frame relay config**
Drag each (EMPTY SPACE) line, to the right place in the configuration (i dont remember the last option. You had 5 blocks to fill and 7 possible answers)

! physical interface
interface Serial0 (EMPTY SPACE)
bandwidth 56
no ip address best, i – internal,
r RIB-failure, S Stale
Origin codes: i – IGP, e – EGP, ? – incomplete
Network Next Hop Metric LocPrf Weight Path
*>i 10.1.1.0/24 192.168.1.2 0 0 65536 i
*>i 10.2.2.0/24 192.168.3.2 0 0 65550 i
* i 172.17.1.0/24 10.0.0.1 0 32768 i
*> i 10.0.0.2

Q: Which next hop is going to be used for 172.17.1.0/24 (not that the ‘>’ is not present for 10.0.0.1)
A. 10.0.0.1
B. 10.0.0.2
C. 192.168.1.2
…

Q:A network engineer is modifying RIPng timer configuration. Which configuration mode should the engineer use?
A. router(config-rtr)#
B. router(config-ripng)#
C. router(config-if)#
D. router(config)#

QUESTION 11
Which three statements about SNMP are true? (Choose Three)
A. The manager configures and send traps to the agent.
B. The manager sends GET and SET messages.
C. SNMPv3 supports authentication and encryption.
D. The manager polls the agent using UDP port 161
E. The MIB database can be altered only by the SNMP agent.
F. The agent is the monitoring device.
Correct Answer: BCD
In a point-to-multipoint Frame Relay topology, which two methods ensure that all routing updates are received
by all EIGRP routers within the Frame Relay network? (Choose Two)
A. Use statically defined EIGRP neighbors on the hub site.
B. Create separate address families.
C. Disable split horizon.
D. Use subinterfaces.
E. Disable EIGRP auto summary.
Correct Answer: CD
Refer to the following configuration command.
router(config)# ip nat inside source static tcp 172.16.10.8 8080 172.16.10.8 80
Which statement about the command is true?
A. Any packet that is received in the inside interface with a source IP port address of 172.16.10.8:80 is
translated to 172.16.10.8:8080.
B. Any packet that is received in the inside interface with a source IP port address of 172.16.10.8:8080 is
translated to 172.16.10.8:80.
C. The router accepts only a TCP connection from port 8080 and port 80 on IP address 172.16.10.8
D. Any packet that is received in the inside interface with a source IP address of 172.16.10.8 is redirected to
port 8080 or port 80.
Correct Answer: B
Which statement describes what this command accomplishes when inside and outside interfaces are correctly
identified for NAT?
ip nat inside source static tcp 192.168.1.50 80 209.165.201.1 8080 extendable
A. It allows host 192.168.1.50 to access external websites using TCP port 8080.
B. It allows external clients coming from public IP 209.165.201.1 to connect to a web server at 192.168.1.50.
C. It allows external clients to connect to a web server hosted on 192.168.1.50.
D. It represents an incorrect NAT configuration because it uses standard TCP ports.
Correct Answer: C
What command allows permit or deny IPv6 traffic? (they edited it)
A. traffic-filter access-list-name
B. access-list
C. access-list ipv6
D. access-group
Correct Answer: A
What are 2 protocols used for user with authentication on network device?
A. CHAP
B. Radius
C. 802.1x
D. PAP
E. TACACS+
Correct Answer: BE
Refer to Exhibit. Which two reasons for IP SLA tracking failure are likely true? (Choose ONE) <= They changed it. The source address is the interface attached on the destination network
R1(config)#ip sla 1
R1(config-ip-sla)#icmp-echo 172.20.20.2 source-interface FastEthernet0/0
R1(config-ip-sla-echo)#timeout 5000
R1(config-ip-sla-echo)#frequency 10
R1(config-ip-sla-echo)#threshold 500
R1(config)#ip sla schedule 1 start-time now life forever
R1(config)#track 10 ip sla 1 reachability
R1(config)#ip route 0.0.0.0 0.0.0.0 172.20.20.2

They added a static ip route to the IP SLA target, without using the tracking. I think F is the good answer. Refer to Dexter dump for the diagram.
A. The source-interface is configured incorrectly.
B. The destination must be 172.30.30.2 for icmp-echo.
C. A route back to the R1 LAN network is missing in R2.
D. The default route has wrong next hop IP address.
E. The threshold value is wrong.
F. The static route is missing the tracking

Q:Features of Netflow version 9? (CHOOSE TWO)
A. Cisco proprietary
B. IEEE standard
C. IETF
D. ingress/egress
E. ingress
F. egress
Correct Answer: D+E
Which option is a prerequisite for stateful NAT64?
A. IPsec for IPv6
B. DNS64
C. Application Level Gateway
D. ICMP64
Dexter ITC
Correct Answer: B
Which option can you use to monitor voice traffic when configuring an IP SLA?
A. udp-jitter
B. tcp-jitter
C. ip sla logging traps
D. ip sla reaction-configuration
E. ICMP-Echo
Correct Answer: A

How to set up IP SLA to monitor jitter between the certain limits? <= (it’s jitter now, not bandwidth)
A. Timeout (not timer)
B. Frequency
C. Threshold
D. Queue-limit
Correct Answer: ?

Which three items can you track when you use two time stamps with IP SLAs? (Choose three.)
A. delay
B. jitter
C. packet loss
D. load
E. throughput
F. path
Correct Answer: ABC
During which DMVPN phase is spoke-to-spoke communication enabled?
A. Phase 1
B. Phase 6
C. Phase 5
D. Phase 2
E. Phase 4
Correct Answer: D
Which two phases of DMVPN allow to spoke sites to create dynamic tunnels to one another? (Choose Two)
A. Phase 1
B. Phase 2
C. Phase 3
D. Phase 4
E. Phase 5
Correct Answer: BC
Q:After reviewing the EVN configuration, a network administrator notices that a predefined EVN, which is known
as “vnet global” was configured. What is the purpose of this EVN? (OR)
What is the purpose of ‘vnet global”?
A. It defines the routing scope for each particular EVN edge interface.
B. It aggregates and carries all dot1q tagged traffic.
C. It refers to the global routing context and corresponds to the default RIB.
D. It safeguards the virtual network that is preconfigured to avoid mismatched routing instances.
Correct Answer: C

Q:Which encapsulation supports an interface that is configured for an EVN trunk?
A. 802.1Q
B. ISL
C. PPP
D. Frame Relay
E. MPLS
F. HDLC
Correct Answer: A

Q:Which cisco Express Forwarding component(s) contain forwarding information? (forwarding information, they changed it)
A. FIB, adjacency table
B. adjacency table.
C. FIB, RIB , Adjanceny table
D. FIB
E. RIB
Correct Answer: I dont know the answer

Q:In which scenario can asymmetric routing occur?
A. active/active firewall setup
Dexter ITC
B. single path in and out of the network.
C. active/standby firewall setup
D. redundant routers running VRRP
Correct Answer: A

Q:How can you mitigate fragmentation issues between endpoints separated by a GRE tunnel? <= (they changed it, they added GRE)
A. PMTU (the D was not present at the end of the answer)
B. TCP MSS
C. windowing
D. ICMP DF bit (this was a new answer)
Correct Answer: A

Q:What configurations does PPPoE allow? (Choose two)
A. Client can be installed on the same network devices as server
B. 8 clients can be configured on 1 CPE
C. Clients can connect to multiple hosts over DMVPN
D. Client connecting over ATM PVC
E. Client installed on native IPv6 network
Correct Answer: BC

Q:A network engineer enables OSPF on a Frame Relay WAN connection to various remote sites, but no OSPF
adjacencies come up.
Which two actions are possible solutions for this issue? (Choose Two)
A. Change the network type to point-to-multipoint under WAN interface.
B. Enable virtual links.
C. Change the network type to nonbroadcast multipoint access.
D. Configure the neighbor command under OSPF process for each remote site.
E. Ensure that the OSPF process number matches among all remote sites
Correct Answer: AD

Q:Which of these can be used for IPv4 to IPv6 communication? (new question, not sure of the exact phrasing)
A. NAT-PT
B. ISATAP
C. L2 to L3 VPN (something like this)
D. IPSec (not sure)

Q:IPv6 access list and need to apply it to block traffic INBOUND SSH and interface (Choose
two)
Answer: there are 5 choices 2 inbound 3 outbound so we have to choose 2 inbound choices
only (the answer had something with "access-filter in” and the other one with “access-class”)

Q:Which command instruct a PPPoE client to obtain its IP address from the PPPoe server?
A. ip address negotiated auto
B. ip address negotiated
C. pppoe enable
D. Ip address DHCP
E. Ip address dynamic

Q:where to apply ipv6 traffic filter ? (they actually show you possible configuration commands, in interface, global … modes).
A. interface configuration
B. router configuration
C. global configuration

Q:Which two statements about IP access-lists are true? (Choose two)
A. IP access-lists without at least one deny statement permit all traffic by default.
B. Extended access-lists must include port numbers.
C. They support wildcard masks to limit the address bits to which entries are applies.
D. Entries are applied to traffic in the order in which they appear.
E. They end with an implicit permit.

Q:Which two configurations can a PPPoE client support? (Choose two)
A. Eight clients are configured on a single CPE.
B. The client is connected to multiple hosts over DMVPN
C. The client is installed on the same network device as the server.
D. The client is connecting over an ATM PVC
E. The client is installed on a native IPv6 network.

Q:Where to configure the DHCPv6 relay IP address for a VLAN
Do you have to enable DHCPv6 relay in the global configuration mode/VLAN interface ?
Do you have to configure something on the VLAN interface/global configuration

Q: logging console 7. Which is true ?
A. you can see debug if you’re connected in SSH
B. High CPU utilization
C. …

reouter eigrp 1
redistribute ospf 100
network 10.10.10.0 0.0.0.255
auto-summary
!
router ospf 100
network 172.16.0.0 0.0.255.255 area 10
redistribute eigrp 1
Q:what will happen to the redistributed network from EIGRP to OSPF? (phrasing was different)

Q: What Authentication does EIGRP use? (2 choices)
A. TKIP
B. MD5
C. Plain Text
D. WPA

This one is from Ordonnez. For me it was not a * but a # in the exibit

Router#show ntp associations
address ref clock st when poll reach delay offset disp
~172.31.32.2 172.31.32.1 5 29 1024 377 4.2 -8.59 1.6
+~192.168.13.33 192.168.1.111 3 69 128 377 4.1 3.48 2.3
#~192.168.13.57 192.168.1.111 3 32 128 377 7.9 11.18 3.6
* master (synced), # master (unsynced), + selected, – candidate, ~ configured
Q: Which of the following is true
A. Master is syncing and exchanging NTP packets successfully
B. Master is not syncing but exchanging NTP packets successfully
C. Master is not syncing and not exchanging NTP packets
…

**Configuration lab** : EIGRP stub

**Simulation labs (show commands)** : EIGRP and OSPF

Thank you to @Ordonnez and @Dima.

https://www.prepaway.com/cisco/pass4sure.300-101.27040.ete.file.html

guys who wrote the exm please check if this is valid

@zoltam
thanks you are very sweet

@Zoltam
Many thanks!

Hi all,
I’m preparing the Route exam. Can you tell me on which page to find valid dumps and which labs enter the exam?

Beforehand thank you very much.

@Nickname
In last 10 pages, it’s not difficult to find it

@Tshaka_Zulu I also found it and used it. It looks like someone has collected all the questions from other dumps, but since Dexter, EOL, Dokdo Dumps are not valid and the questions come from these dumps, I think it is good practice but not enough to to take the exam. But only it is my opinion.

Thank you very much for your prompt response @art,

I’ll look for it

@Tshaka_Zulu, how did you open the ETE file?

Took 300-101 this morning and failed. Had the following 4 sims
EIGRP Stub Sim
Policy Based Routing Sim
EIGRP Evaluation Sim
OSPF Evaluation Sim

Used the following items
Cisco.Examcollection.300-101.v2016-04-16.premium.149q
MeasureUp CCNP 300-101 Practice Material
Cisco.PracticeTest.300-101.v2017-10-10.by.Easton.79q

Many topics on the exam was not in these materials.

@Graf
Could you provide any question any topic for us ?

Guys there are trolls on this forum faking updates. The Route just went through an update and wouldnt make sense to go through another update. There are people who are stating that they have passed with EON/Dokdo dumps yesterday and the day before. Im pretty sure the trollers here are the ppl who are trying to market their products

@Zoltmam,
I’d say the answer is C ? on the NTP question.

To complete @Zoaltam questions

Q:Features of Netflow version 9? (CHOOSE TWO)
A. Cisco proprietary
B. IEEE standard
C. IETF
D. ingress/egress
E. ingress
F. egress
Correct Answer: C-D

How to set up IP SLA to monitor jitter between the certain limits? <= (it’s jitter now, not bandwidth)
A. Timeout (not timer)
B. Frequency
C. Threshold
D. Queue-limit
Correct Answer: c

Q:Which cisco Express Forwarding component(s) contain forwarding information? (forwarding information, they changed it)
A. FIB, adjacency table
B. adjacency table.
C. FIB, RIB , Adjanceny table
D. FIB
E. RIB
Correct Answer: A

Explanation: Cisco Express Forwarding (CEF) switching is a proprietary form of scalable switching intended to tackle the problems associated with demand caching. With CEF switching, the information which is conventionally stored in a route cache is split up over several data structures. The CEF code is able to maintain these data structures in the Gigabit Route Processor (GRP), and also in slave processors such as the line cards in the 12000 routers. The data structures that provide optimized lookup for efficient packet forwarding include:

The Forwarding Information Base (FIB) table – CEF uses a FIB to make IP destination prefix-based switching decisions. The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and these changes are reflected in the FIB. The FIB maintains next-hop address information based on the information in the IP routing table.

Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with switching paths such as fast switching and optimum switching.

Adjacency table – Nodes in the network are said to be adjacent if they can reach each other with a single hop across a link layer. In addition to the FIB, CEF uses adjacency tables to prepend Layer 2 addressing information. The adjacency table maintains Layer 2 next-hop addresses for all FIB entries.

https://www.cisco.com/c/en/us/support/docs/routers/12000-series-routers/47321-ciscoef.html

Q:Which of these can be used for IPv4 to IPv6 communication? (new question, not sure of the exact phrasing)
A. NAT-PT
B. ISATAP
C. L2 to L3 VPN (something like this)
D. IPSec (not sure

Correct Answer: A

NAT-PT Overview
Network Address Translation (NAT)-Port Translation (PT) for Cisco software based on RFC 2766 and RFC 2765 is a migration tool that helps customers transition their IPv4 networks to IPv6 networks. Using a protocol translator between IPv6 and IPv4 allows direct communication between hosts that use different network protocols. You can use static, dynamic, port address translation, IPv4-mapped definitions for NAT-PT operation.

The figure below shows that NAT-PT runs on a device that is configured between an IPv6 network and an IPv4 network that helps connect an IPv6-only node with an IPv4-only node.
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_nat/configuration/15-mt/nat-15-mt-book/ip6-natpt.html

Q:Which command instruct a PPPoE client to obtain its IP address from the PPPoe server?
A. ip address negotiated auto
B. ip address negotiated
C. pppoe enable
D. Ip address DHCP
E. Ip address dynamicv

Correct Answerd: B

Q:where to apply ipv6 traffic filter ? (they actually show you possible configuration commands, in interface, global … modes).
A. interface configuration
B. router configuration
C. global configuration

Correct Answerd: A

this question can be response using a drag and drop traffic-filter vs ACL-filter

here the drag and drop
IPv6 Traffic Filter
+ It filters traffic on the interface level
+ It supports tagged ACLs

IPv6 Access Filter
+ It controls traffic to and from the router
+ It requires the destination address for inbound traffic to be a local address
+ It filters management traffic

Q:Which two statements about IP access-lists are true? (Choose two)
A. IP access-lists without at least one deny statement permit all traffic by default.
B. Extended access-lists must include port numbers.
C. They support wildcard masks to limit the address bits to which entries are applies.
D. Entries are applied to traffic in the order in which they appear.
E. They end with an implicit permit.
Correct Answerd: C – D

Q:Which two configurations can a PPPoE client support? (Choose two)
A. Eight clients are configured on a single CPE.
B. The client is connected to multiple hosts over DMVPN
C. The client is installed on the same network device as the server.
D. The client is connecting over an ATM PVC
E. The client is installed on a native IPv6 network.
Correct Answerd: A-B

Q:Where to configure the DHCPv6 relay IP address for a VLAN
Do you have to enable DHCPv6 relay in the global configuration mode/VLAN interface ?
Do you have to configure something on the VLAN interface/global configurationv

this questions can be response with a drag and drop

+ DHCPv6 Server:
IPv6 address autoconfig
IPv6 enable

+ Client Interface:
IPv6 address
IPv6 DHCP Relay destination

@Zoaltam when did you take your exam ?

router eigrp 1
redistribute ospf 100
network 10.10.10.0 0.0.0.255
auto-summary
!
router ospf 100
network 172.16.0.0 0.0.255.255 area 10
redistribute eigrp 1

what will happen to the redistributed network from EIGRP to OSPF?

I tried lab in gns,
To redistribute EIGRP to OSPF?
It will not be redistributed until we add subnets command under ospf 100
” redistribute eigrp 1 subnets”.

To redistribute OSPF to EIGRP?
It too will not be redistributed until we configure the metrics for eigrp.
“redistribute ospf 100 metric 1544 2000 255 1 1500”

@Zoltam

Which dumps did you use? Did you use EON/Dokdo?

I took the exam this morning. I studied using Dexter dump.

If you do and understand every question of the 25x pages, you will pass for sure, no matter the exam.

Regarding the question on IPv4 to IPv6, TWO answers were expected.

Good luck to you all

@Zoltam Congrats bro. Can u plz share the dumb u have studied or mention the page name
where i can find it.

@zoltam
Thanks, right now I’ve enough confidence for the exam

Team is there any issue saving your labs?

Thanks

Just made an EIGRP Stub lab…
h ttps://file.io/NthIcI

Router image used: c7200-jk9s-mz.124-13b.image

Well – looks like that hosting site has already removed it… anybody know of a good anonymous file sharing site I can upload it?

@zoltam and all

For the question:
How can you mitigate fragmentation issues between endpoints separated by a GRE tunnel? < (they changed it, they added GRE)
A. PMTU (the D was not present at the end of the answer)
B. TCP MSS
C. windowing
D. ICMP DF bit (this was a new answer)
Correct Answer: A

I think that correct answer is B

there are two ways to mitigate fragmentation ((MSS & PMTUD))
PMTUD : it was originaly developed for that.
But here as the choices says PMTU not PMTUD
so the correct answer is B (MSS)

Q:Which cisco Express Forwarding component(s) contain forwarding information? (forwarding information, they changed it)
A. FIB, adjacency table
B. adjacency table.
C. FIB, RIB , Adjanceny table
D. FIB
E. RIB
Correct Answer: A

I think that the correct answer is D (FIB)

FIB has the forwarding information but the adjacency table just has the layer 2 addressing of the next hop addresses

which scenario can asymmetric routing occur?
A. active/active firewall setup
B. single path in and out of the network.
C. active/standby firewall setup
D. redundant routers running VRRP
Correct Answer: A

I Think that the answer is (D) as digitaltut says

See The Book CCNP Routing and Switching ROUTE 300-101 Official Cert Guide Kevin Wallace (Topic: Asymmetric Routing)

you will find that FHRP (for example, HSRP, VRRP, or GLBP) causes Asymmetric Routing.

And for active/active firewall it is impacted by the asymetric routing but it isn't the cause of it by itself.

Please verify me if my thoughts is right or wrong

@Zoltam

Thanks for the feed back!

@Somebody
How can you mitigate fragmentation issues between endpoints separated by a GRE tunnel? < (they changed it, they added GRE)
A. PMTU (the D was not present at the end of the answer)
B. TCP MSS
C. windowing
D. ICMP DF bit (this was a new answer)

I remember this, D was not present in PMTU so basically it is just a Path MTU without discovery.

I think the correct answer is B.

Q:Which cisco Express Forwarding component(s) contain forwarding information? (forwarding information, they changed it)
A. FIB, adjacency table
B. adjacency table.
C. FIB, RIB , Adjanceny table
D. FIB
E. RIB
Correct Answer: A

I think I will go with A (FIB, Adjacency Table)

CEF maintains two tables in the data plane. the FIB for layer 3 forwarding information, whereas the adjacency table maintains the layer 2 information for next hops listed in FIB.

I think the answers are B and A

@Zoltam
your shared dump is valid? bro
if you say yes I will study

Hi All,

Could you please tell me if its possible to pass this exam using the examples from 9TUT ?

Thanks everyone.

Q:Which of these can be used for IPv4 to IPv6 communication? (new question, not sure of the exact phrasing)
A. NAT-PT
B. ISATAP
C. L2 to L3 VPN
D. IPSec

Answer: A or B?

Explanation:
ISATAP defines a method of generating a link-local IPv6 address from an IPv4 address.
NAT-PT is to be used with IPv4 to IPv6 migration scenarios and it’s purpose is to provide bi-directional connectivity between IPv4 and IPv6 domains.

Q:where to apply ipv6 traffic filter ? (they actually show you possible configuration commands, in interface, global … modes).
A. interface configuration
B. router configuration
C. global configuration

Answer: A
In order to assign an IPv6 ACL to an interface, use this command in interface configuration mode: ipv6 traffic-filter access-list-name {in | out}
https://www.cisco.com/c/en/us/support/docs/ip/ip-version-6/113126-ipv6-acl-00.html

Router#show ntp associations

address ref clock st when poll reach delay offset disp
~172.31.32.2 172.31.32.1 5 29 1024 377 4.2 -8.59 1.6
+~192.168.13.33 192.168.1.111 4 69 128 377 4.1 3.48 2.3
*~192.168.13.57 192.168.1.111 3 32 128 377 7.9 11.18 3.6
* master (synced), # master (unsynced), + selected, – candidate, ~ configured

Q: Which of the following is true

A. Master is syncing and exchanging NTP packets successfully
B. Master is not syncing but exchanging NTP packets successfully
C. Master is not syncing and not exchanging NTP packets

I can remember that the last NTP associations on my test have * but i cant remember the stratum and reach values.

The choices provided by Zoltam is exactly the same.

@Ordonez
Router#show ntp associations
address ref clock st when poll reach delay offset disp
~172.31.32.2 172.31.32.1 5 29 1024 377 4.2 -8.59 1.6
+~192.168.13.33 192.168.1.111 4 69 128 377 4.1 3.48 2.3
*~192.168.13.57 192.168.1.111 3 32 128 377 7.9 11.18 3.6
* master (synced), # master (unsynced), + selected, – candidate, ~ configured
Q: Which of the following is true
A. Master is syncing and exchanging NTP packets successfully
B. Master is not syncing but exchanging NTP packets successfully
C. Master is not syncing and not exchanging NTP packets

So, correct answer to above question is A ?

@CCNPRoute

That would be my answer if the Reach value is 377.

Have you exam logged in in the last few days?

@Ordonez
Yes, if value 377, thanks