Share your ROUTE v2.0 Experience

Where to find Dexter’s dump

EON + Dokdo + Dexter dump

https://drive.google.com/open?id=1WKyP5irqxSLvYoxlIvg9n_xN7zeMAAj5

Do not believe 100%
Just reference

Passed 944, use dexter dump

This is the best items that i can remember.

QUESTION 11
Which three statements about SNMP are true? (Choose Three)
A. The manager configures and send traps to the agent.
B. The manager sends GET and SET messages.
C. SNMPv3 supports authentication and encryption.
D. The manager polls the agent using UDP port 161
E. The MIB database can be altered only by the SNMP agent.
F. The agent is the monitoring device.
Correct Answer: BCD

In a point-to-multipoint Frame Relay topology, which two methods ensure that all routing updates are received
by all EIGRP routers within the Frame Relay network? (Choose Two)
A. Use statically defined EIGRP neighbors on the hub site.
B. Create separate address families.
C. Disable split horizon.
D. Use subinterfaces.
E. Disable EIGRP auto summary.
Correct Answer: CD

Refer to the following configuration command.
router(config)# ip nat inside source static tcp 172.16.10.8 8080 172.16.10.8 80
Which statement about the command is true?
A. Any packet that is received in the inside interface with a source IP port address of 172.16.10.8:80 is
translated to 172.16.10.8:8080.
B. Any packet that is received in the inside interface with a source IP port address of 172.16.10.8:8080 is
translated to 172.16.10.8:80.
C. The router accepts only a TCP connection from port 8080 and port 80 on IP address 172.16.10.8
D. Any packet that is received in the inside interface with a source IP address of 172.16.10.8 is redirected to
port 8080 or port 80.
Correct Answer: B

Which statement describes what this command accomplishes when inside and outside interfaces are correctly
identified for NAT?
ip nat inside source static tcp 192.168.1.50 80 209.165.201.1 8080 extendable
A. It allows host 192.168.1.50 to access external websites using TCP port 8080.
B. It allows external clients coming from public IP 209.165.201.1 to connect to a web server at 192.168.1.50.
C. It allows external clients to connect to a web server hosted on 192.168.1.50.
D. It represents an incorrect NAT configuration because it uses standard TCP ports.
Correct Answer: C

What command allows permit or deny IPv6 traffic? (they edited it)
A. traffic-filter access-list-name
B. access-list
C. access-list ipv6
D. access-group
Correct Answer: A

What are 2 protocols used for user with authentication on network device?
A. CHAP
B. Radius
C. 802.1x
D. PAP
E. TACACS+
Correct Answer: BE

Refer to Exhibit. Which two reasons for IP SLA tracking failure are likely true? (Choose ONE)
A. The source-interface is configured incorrectly.
B. The destination must be 172.30.30.2 for icmp-echo.
C. A route back to the R1 LAN network is missing in R2.
D. The default route has wrong next hop IP address.
E. The threshold value is wrong.

Correct Answer: AC –> I dont know which one is the answer

A network engineer needs to verify IP SLA operations on an interface that shows on indication of excessive
traffic. Which command should the engineer use to complete this action?
A. Show connectivity
Dexter ITC
B. Show reachability
C. Show track
D. Show threshold
E. Show frequency

Correct Answer: C

Which Netflow version supports MPLS?
A. none
B. all of them
C. version 8 and 9
D. version 9
Correct Answer: D

Which option is a prerequisite for stateful NAT64?
A. IPsec for IPv6
B. DNS64
C. Application Level Gateway
D. ICMP64
Dexter ITC
Correct Answer: B

Features of Netflow version 9?
A. Cisco proprietary
B. IEEE standard
C. IETF
Correct Answer: C

Which option can you use to monitor voice traffic when configuring an IP SLA?
A. udp-jitter
B. tcp-jitter
C. ip sla logging traps
D. ip sla reaction-configuration
E. ICMP-Echo
Correct Answer: A

How to set up IP SLA to monitor Bandwidth between the certain limits?
A. Timer
B. Frequency
C. Threshold
D. Queue-limit
Correct Answer: C

Which command is used to check IP SLA when an interface is suspected to receive lots of traffic with options?
A. show track
B. show threshold
C. show timer
D. show delay
Correct Answer: A

Which three items can you track when you use two time stamps with IP SLAs? (Choose three.)
A. delay
B. jitter
C. packet loss
D. load
E. throughput
F. path
Correct Answer: ABC

During which DMVPN phase is spoke-to-spoke communication enabled?
A. Phase 1
B. Phase 6
C. Phase 5
D. Phase 2
E. Phase 4
Correct Answer: D

Which two phases of DMVPN allow to spoke sites to create dynamic tunnels to one another? (Choose Two)
A. Phase 1
B. Phase 2
C. Phase 3
D. Phase 4
E. Phase 5
Correct Answer: BC

After reviewing the EVN configuration, a network administrator notices that a predefined EVN, which is known
as “vnet global” was configured. What is the purpose of this EVN? (OR)
What is the purpose of ‘vnet global”?
A. It defines the routing scope for each particular EVN edge interface.
B. It aggregates and carries all dot1q tagged traffic.
C. It refers to the global routing context and corresponds to the default RIB.
D. It safeguards the virtual network that is preconfigured to avoid mismatched routing instances.
Correct Answer: C

Which values identifies VPNs in an EVN environment?
A. DLCI
B. route target
C. virtual network tag
D. VLAN ID
Correct Answer: C

Which encapsulation supports an interface that is configured for an EVN trunk?
A. 802.1Q
B. ISL
C. PPP
D. Frame Relay
E. MPLS
F. HDLC
Correct Answer: A

Which cisco Express Forwarding component maintains Layer 2 addressing information?
A. CEF
B. adjacency table.
C. FIB, RIB , Adjanceny table
D. FIB
E. RIB
Correct Answer: I dont know the answer

n which scenario can asymmetric routing occur?
A. active/active firewall setup
Dexter ITC
B. single path in and out of the network.
C. active/standby firewall setup
D. redundant routers running VRRP
Correct Answer: A

Which technology was originally developed for routers to handle fragmentation in the path between end points?
A. PMTUD
B. MSS
C. windowing
D. TCP
E. global synchronization
Correct Answer: A

What configurations does PPPoE allow? (Choose two)
A. Client can be installed on the same network devices as server
B. 8 clients can be configured on 1 CPE
C. Clients can connect to multiple hosts over DMVPN
D. Client connecting over ATM PVC
E. Client installed on native IPv6 network
Correct Answer: BC

A network engineer enables OSPF on a Frame Relay WAN connection to various remote sites, but no OSPF
adjacencies come up.
Which two actions are possible solutions for this issue? (Choose Two)
A. Change the network type to point-to-multipoint under WAN interface.
B. Enable virtual links.
C. Change the network type to nonbroadcast multipoint access.
D. Configure the neighbor command under OSPF process for each remote site.
E. Ensure that the OSPF process number matches among all remote sites
Correct Answer: AD

Thanks @Ordonez

Where will you focus your studies, for next attempt ?

@Dima

Did you encounter a DnD for A frame relay and aaa authentication.?

I can remember I have more VRF lite

i have two ip route

Ip route vrf blue 0.0.0.0 0.0.0.0 10.2.2.0
IP route vrf yellow 0.0.0.0 0.0.0.0 10.2.1.0

Which behavior will show when you show ip route

Is tere anyone remember the Question about “vdfp purple”?

@Ordonez yes I had dnd for frame relay and another dnd for aaa I have mentioned the dnd in the comment above

@Mm the question about bed purple was something like what will you see when you type the show up route vrf purple and the answer was something like
you will see the routing table of the specific vrf (again it is what I remember )

If someone could update with the new DnD that would be great appreciated

The New DnD really have a huge impact then together with the new OSPF like

when you redistribute the EIGRP to OSPF

EIGRP
no auto-summary
10.0.0.0 0.0.0.255
OSPF
Redistribute static

something like this

What will happen to the EIGRP that has been redistributed?

A. It will become N2
B. Became Type 3 LSA
c.
d.

Is this a new lab altogether

@ apoi stop spammin

Hello guys,

Can someone help me out with the labs for GNS3?? I tried to open Dexter’s Simulations on GNS3, but it will not allow me to open them.

Thanks!!!

Much Appreciated!!

Sample programming for Frame Relay for those who may have not done it before. This example has two sub interfaces and is load balancing.
!
interface Serial0
no ip address
encapsulation frame-relay IETF
no fair-queue
frame-relay lmi-type ansi
!
interface Serial0.1 point-to-point
ip address x.x.x.138 255.255.255.252
ip load-sharing per-packet
frame-relay interface-dlci 80 IETF
!
interface Serial1
no ip address
encapsulation frame-relay IETF
frame-relay lmi-type ansi
!
interface Serial1.1 point-to-point
ip address x.x.x.186 255.255.255.252
ip load-sharing per-packet
frame-relay interface-dlci 184

ip route 0.0.0.0 0.0.0.0 x.x.x..137
ip route 0.0.0.0 0.0.0.0 x.x.x.185

Hello guys,

Can someone help me out with the labs for GNS3?? I tried to open Dexter’s Simulations on GNS3, but it will not allow me to open them.

Thanks!!!

Much Appreciated!!

I have cleared my Route 300-101 yesterday (02/12/2018). DigitalTut and EON are still valid.

There were 3 Labs
EIGRP STUB
EIGRP and OSPF Redistribution
Policy Based Routing.
I was not able to ping 10.2.2.2 because the network was subneted to 10.3.0.0 so missing 10.2.0.0
Please do home lab for this problem.

Looks like we are having mixed answers — some saying EON ETC still valid, some not? Hard to differentiate between troll/spam. Please help confirm/contribute to what may be still valid or not if possible, please

Anyone else taking the exam today? Please update!

This sucks, I cant tell if DOKO is valid or not lol.

Hello guys,

Can someone help me out with the labs for GNS3?? I tried to open Dexter’s Simulations on GNS3, but it will not allow me to open them.

Thanks!!!

Much Appreciated!!

Viper February 13th, 2018

Please go through DigitalTut and EON and that will be more than enough to clear 300-101.

At the moment, I think that the best practice is study dexter dump, because there are a lot of questions

So, Dok and dexter dumbs should be good and the Eval questions are back?

Hi
I will take a test after 6hours
I studied dexter dump
See you

Can some one email me the GNS3 lab files if that is possible please. My email is
nazeerf7atgmaildotcom

Hi all
Please help
share valid dump

Hi all,

Does anyone have GNS3 labs that actually opens the topology in GNS3???

are the simualtion Evals on the test agian?

Hi @Michelle: We will appreciate your feedback about dexter dump once time you take your exam.

So has anyone taken the test 2/13/2018, if so are the evals on the test now?

took my test 2/13/2018 , low 700’s 9tut questions out of date. do not follow 9tuts brain dumps I only saw a handful.going to cancel my membership.

@skynet yes . I have an exam in an hour.

Good luck Michelle, Tell me if there is any EIGRP/OSPF evals if you could!

@Michelle: Good luck! I have in one week. Wish you the best!

So damn confused… no clue what to study now…any advice?

Wait for Michelle’s response.

I tried to clean up.
Please check.

https://drive.google.com/open?id=14YuzOrXr07FoWKgjzmBKuk-IQO4QYMD-

@Michael I am curious about the answer.I tried to dexter dump but I am worried that it is up to date.

NOW i’m ready for the dumps please share the updated one :)

Dexter dump >>> 695
1simul 2simlet…
Dexter is not valid

@michelle
Do u mean that answers on Dexter’s dump are wrong ?
Or new questions appeared on your exam ??
Thanks

@Mİchael I was very sorry . We need to find the current dump

@Michael

Do you remember any questions?

please update

@michelle, did you just use only Dexter’s dump for practicing?

Don’t forget that dumps are just here to help you practicing. Don’t learn the questions: you need to understand what you are doing in order to pass.

i saw dexter + ordenz + dokdo dumps

but I knew was about 30 of 53 questions.

1simulation(eigrp stubp) and 2simlet …???

@michelle
I agree with you. guy.

In dexter dump, I could not find appropriate Quiz :(………….

I got on my exam, with 76* marks ……………

it means that we have no valid dump anymore :(

@leechs
So u are saying that there are new questions or may be refrased ?? …i am giving the exam tmr

Then keep looking for the current dump. Finally, is there another entry? DEXTER dump season closed?