Share your ROUTE v2.0 Experience

please valid ccnp switch 300-115

I studied EON/TAKESHIMA Dump.

We know Korean is refuse.

Please update me if you have any latest update about 300-101. I am going to take exam tomorrow. Please help me before my money gets wasted.

Hi everybody

please share valid dump

please help me I have to pass the exam :(

Hİ,
I have tried dexter dump but some comments are that dxter dump is not exhaustive which is the current dump
which valid dump ?

@PL
Could you please send me the lab files if you have other than lab sim chapter of this website.
My email is nazeerf7atgmaildotcom

Thanks

Whoever planning exam , please share feedback whether 79Q is sufficient to pass exam or not?

Can someone please share link for practice lab and packet tracer. Or atleast just page No where i can download the same.

Im confused on which DnD is the LMI DnD, any help?

Please Guys help

I confused which dump is valid?
please send my mail

nneettwwoorrkkiinngg@ g m a i l. c o m

Which security level is supported throughout al snmp versions?

A. authpriv
B. auth No priv
C. No auth No priv

In dump answer is C

But i think answer is B, Because V1&V2 provide community string authentication

Any suggestion?

@digitaltut:
I would just like to clarify, why in the EIGRP Stub SIm page, you use ip summary-address eigrp 123 10.2.0.0 255.255.0.0, but in the simlet you use ip summary-address eigrp 123 10.2.0.0 255.255.240.0.. which one is accurate?

Can someone please confirm the correct summary address for the EIGRP Stub sim?
thanks

Latest Exam Solution

docs.google.com/document/d/1cp2vtCYSV_21JTZF9D14Ua2gHdijtZjfIDuyVT1NyJg/edit?usp=sharing

@ Anonymous
use ip summary-address eigrp 123 10.2.0.0 255.255.0.0

or if you have null use
ip summary-address eigrp 123 10.0.0.0 255.0.0.0

@Anonymous;

The correct answer is:
ip summary-address eigrp 123 10.2.0.0 255.255.240.0

Note: you need to summarize the individual IP addresses.

@Anonymous:

If you do a “show ip route” you would see the following; if you summarize them,you would get

10.2.0.0 255.255.240.0

R3#show ip route
10.0.0.0/8 is variably subnetted, 9 subnets, 2 masks
D 10.2.2.0/24 [90/30720] via 10.2.3.4,00:00:06, Serial0/0
C 10.2.3.0/24 is directly connected, Serial0/1
D 10.2.4.0/24 [90/161280] via 10.2.3.4,00:00:03, Serial0/0
D 10.2.5.0/24 [90/161280] via 10.2.3.4,00:00:03, Serial0/0
D 10.2.6.0/24 [90/161280] via 10.2.3.4,00:00:03, Serial0/0
D 10.2.7.0/24 [90/161280] via 10.2.3.4,00:00:02, Serial0/0
D 10.2.8.0/24 [90/161280] via 10.2.3.4,00:00:02, Serial0/0
D 10.2.9.0/24 [90/161280] via 10.2.3.4,00:00:02, Serial0/

what is valid dump ?

Does anyone have packet tracer labs for the sims? Or GNS3?

Can anyone confirm if tab and “?” are usable during the sims?

hi

HI guys,

I am taking the exam in a couple of hours and I am unsure about the EIGRP stub summarisation.

When I do a show ip route on R3, what should I be looking for to decide what to summarise by? or do I just summarise by one same summary for the lab? (i.e. is there different scenarios)

@nickname1 u have to do show ip route to know the ip that needs to be summarize. Good luck on your exam. what dumps did u study?

@Anonymous

Dokdo is vaild!!

Where is Dokdo dump? the link I found to it won’t open in my VCE?

Mac- I studied dexter, eon, ordonez ( I used multiple versions of same dumps, just updated) I will let you know how I get on.

@Nickname1 can u give us an update after ur exam?

@somebody about snmp give a look at:
https://www.cisco.com/c/en/us/td/docs/routers/ir910/software/release/1_1/configuration/guide/ir910scg/swsnmp.pdf

Please Guys help

I confused which dump is valid?
please send my mail

nneettwwoorrkkiinngg@ g m a i l. c o m

Can someone clarify the difference

40. If you run the command auto-cost reference-bandwidth 10000 one one of the router in the network, what will happen ?
Choose one option:
A. It will make 10Gbps on all of them
B. It will make 1 Gbps on all of them
C. dont remember
Answer : A
If you configure one router in your network with the auto-cost reference bandwidth 100 command, which effect
on the data path is true?
A. The data path remains the same for all links.
B. The data path changes for 10 Mbps links only.
C. The data path changes for all links.
D. The data path changes for 10 Gbps links only.
Correct Answer: A

@Anonymous

In ospf reference bandwidth is already 100 by default, so the cost for every interface on router remain the same => The data path remains the same for all links

When we enter “auto-cost reference-bandwidth 10000” command in ospf configuration mode on a router, we change the default value (100) and apply it to all ospf interfaces, so the cost for every link will recompute with new value of 10,000 on the router.

Best study material

https://www.file-upload.com/2lcargqz6oml

@art thank you so much for your explanation

cheers

one more question on the exam do we have to save after we did the config or it will save automatically ?

Hi guys,

I took my exam this morning, Pass 93x.

LABS- pbr, ospf/eigrp redistribuition(fa) and eigrp stub.

DnD the usual 5

I studied eon, ordonez (think these two are fairly similar) and dexter. I also studied the questions that people had wrote out on earlier pages on this board.

Somebody made note about the PADI PADO PADR question that DID come up, please learn these. I cannot remember the question sorry, if you learn the meanings though you will be fine.

There was a NAT pool question I hadn’t seen before but I cannot remember the question, again sorry. Somebody had mentioned something about it earlier on here, I wish I searched into it more.

Study the topics and learn the background of the questions you aren’t sure of when going through the dumps as a lot of questions seemed to be worded differently to the dumps!!

Thanks guys

Hi nickname,

Will take my exam tomorrow morning.

for EIGRP Stub, what should be the config accepted? 255.255.240.0 or 255.255.0.0

R4>enable
R4#configure terminal
R4(config)#interface s0/0
R4(config-if)#ip summary-address eigrp 123 10.2.0.0 255.255.0.0

Choose correct statement about NAT. [Nat (Dynamic Nat)]

Answer: Inside local, this list will be translated to this subnet (which is pool)

Are you referring to this?

Ordonez, I originally summarised to 255.255.240.0 but when I checked the routing table there was still I think 8 networks in the table, and looking at the question it told me the problem would be solved when the lan was pingable and the Routing Table only had two 10. subnets in it, so I summarised to 255.255.0.0.

And I think it might of been that one yes. Apologies for vagueness it was stressful!!

Thanks Nickname1!

Will try to summarised to 255.255.0.0

Congrats again!

Looking forward to pass my test tomorrow!

@Nickname1 bro Congarts

please share eon, ordonez and dexter files

@Nickname1 plz share dumps google drive link

What does the LMI dnd look like exactly?

@ goony
Look back a few pages and you will find all the DNDs…

Hello guys,

can someone please share the labs with me?? i tried to open the labs
off of Dexter’s dump, but somehow i cant get them to open on GNS3.

Thank you!!!

please could you share ordonez dump?

dont test to ccnp route
is changed dump to dokdo

i’m failed 18 f*ck

@dokdo

18? you korean? zzzzzzzzzzzzzzzzzzzjonna us/gi/ne

si hum bo ju ma ra
dump ba GGut da si bal

si bal jot got un ci ci en pi

ci bal jot det a
my money 300$ is die

Just passed exam using DOKDO+EON+ORDONEX. (All 3 are almost same). 2-3 new question. But dump enough to atleast pass exam.