Share your ROUTE v2.0 Experience

@EIGRP Stub,
thank for your comment, but if we choose A.active/active firewall setup, the question should ask
which scenario can avoid asymmetric routing occur ? and the answer should A,C,D. can you explain why we should choose answer A for this question.

@FireRanger congratulations for your success exam and thank you for your experiences. Do you have a total of 10 new questions that are not listed in any of the dumps (EON, Dexter, Dokdo)?

Question from Dokdo dump:
Using new backup router in spite of faulty one in ospf domain but relationship with neighbor in one interface only not working, what is the reason of this problem?
A. areaID mismatch
B. auth mismatch
C. proccess id not match
D. timers mismatch
E. MTU mismatch
ANS: D,E
I am agree with answer, but B(auth mismatch) is also seems correct, espesially when we are configuring authentication per interface (not in area). Can somebody explain it?
Thanks in advance!

@art B & E correct answer

@FireRanger is not real

@Anonymous
Ok, and why not D then?

Hello, im planning to take the exam next week. @FireRanger congrats, can u remember and share to us what are the new questions?

today 9.2.2018 i clear my ccnp route exam with 963 score.
Dexter is 90% valid first study this dump afterwards study eon and Dokdo)..eon and dokdo is 10% valid….exam is easy do not get panic…in my exam copy running-config starup-config does not work on lab question….but it is not a problem.
labs-eigrp stub,pbr,redistribution with distance
Thank you to digital tut,dexter,eon,wbs,dokdo

Hi, I passed with 9xx

53 Questions.

DnD = 5 Questions
Lab = 3 Questions (EIGRP OSPF Redistribution, Stub, PBR)

A Question about hub and spokes with loopback and SNMP v2 authentication (username and password or community string ? )

Thanks to all…next step TSHOOT!

@ccnp haha do not troll

Hi just passed today with 9XX.

ORDONEZ dumps still valid for now. Handful of new questions only.

@Roy the question ask about “In which scenario can asymmetric routing occur” in a situation of Active/active firewall setup, you could have two Active FWs with two different IPs, in this situation in a L3 switch/Router, connected to this two FWs, you could apply two different routes with the same AD (Load Balancing) that point to FWs (as in the example default routes), and the return traffic “COULD” seek a different path. (if you don’t have an ASA or another FW that support the feature to avoid Asymmetric routing)

Load balancing with two active FWs:
R1(conf)#ip route 0.0.0.0 0.0.0.0 [Ip.FW1]
R1(conf)#ip route 0.0.0.0 0.0.0.0 [Ip.FW2]

@art don’t worry about this question, the answers was too reworded :-D in vce/dump:
Using new backup router in spite of faulty one in ospf domain but relationship with neighbor in one interface only not working, what is the reason of this problem?(choose two)

In the exam you will find only two right answers to choose, in your example ABDE are all valid options ;-)

@EIGRP Stub,
thank you for your explain, then tmr i can go to exam without fear about the unclear point :D .

passed my test recently. but there were about 15 new questions (i studied Jan 2018 version). the good news is that all SIMs were covered here. Thanks @digitaltut.

three DND, one is covered here, TACACS+/router/user. One I had no idea, don’t even remember it after test. Third one has mgre/nhrp/hub/spoke on the left, don’t remember all details on the right something like device as server/ protocol for multiple tunnels/usually dynamic address/find ip address.

i passed with high score, so I guess if you really studied here comprehensively, you should be able to handle the new questions…and also the new questions/answers were making common sense.

LATEST 470 Q&As with Drag&Drop DUMPS
Drag&Drop NEW Q&As DUMPS
Latest Dumps in Both PDF & VCE Format.
Working VCE Player
All lab topologies (.pkt) to practice in Packet tracer.

do anybody can share the book “how to Master CCNA” by René Molenaar

LATEST 480+463 Q&As+D&D+LABs DUMPS
Drag&Drop NEW Q&As DUMPS
Latest Dumps in Both PDF & VCE Format.
Working VCE Player
All lab topologies (.pkt) to practice in Packet tracer.

Below link

https://docs.google.com/document/d/1cp2vtCYSV_21JTZF9D14Ua2gHdijtZjfIDuyVT1NyJg/edit?usp=sharing

Dokdo is valid!
Almost all questions of dokdo
2-3 questions of Dexters,
4-5 new questions
Labs PBR, Eigrp Stub, Redistribution R2-R3 link fastethenet
DND: router tacacs, user, LMI, mGRE, frame relay, dmvpn

one question about use command #service timestamps log datetime msec

Thanks for all

I will be taking the exam early next week and I will advise.

The .7z files are not corrupt, you cannot use Winzip to open a .7z file even though it recognizes it. You must download 7-zip file extractor to open .7z files.

guys,

Where can I find the gns3 lab files to practice? Please help.

@Ghauri

Take a look at Lab sim chapter. There you will find some labs ready to practice, but in my opinion it’s best to create your own labs in gns3.

Pase 905 dexter eon valid

passed 300-101 9xx

dokdo is valid

good luck guys

i finished ccnp

Hello Guys
is this order correct for determining a BGP route?

Weight

Local Preference

AS-PATH length

Origin

MED

@PL
. Could you please help to create the labs in GNS3 .. share the IOS that you use to practice or share the gns3 files labs. Thank you in advance for your esteemed support

Hi all

I will start

Can you send me valid dumps?

Thank you all

kutayulubas at gmail dot com

hi guys can one you perhaps tell me how do you renew your account or get hold of admin ?

Thanks for the Dokko’s dumps

@saxman can you send me dokdo dump ?

kutayulubas at gmail dot com

first would like to thank to digitaltut that having lab, question and this forum, it will be hard to get pass without these. thank @Dexter,@EON, @EIGRP Stub @Dokdo for help some explain, and prepare question . i pass with high score 9xx that spend over a month to understand concept of question of each dump. i’m not perfect with all question but it better then memorize. in my exam base on:
– Dokdo dump is 80 percent that correct but noted in Dokdo dump they just have answer keyword so when exam you need to read the question clearly. careful with PPPOE question (PADI,PADR..,etc) cisco will make you confuse.
-Dexter dump is 10 percent i remember one question about which cisco express forwarding component maitanace layer 2 information ? answer is is adjacency table , and another 3-5 question i don’t remember, but if you ever study daxter dump i think you can do it.
-new question about framrelay and stateful DHCPV6 (only 2).
-DnD still FramRelay,Router/TACAS+server/User,LMI,IPV6 security (doko DnD all )
-simulation RBP please test on clients site to get result 9 packet hit on route-map,Redistribute EIGRP OSPF make sure can ping success from R1 to outsite ,EIGRP Stub maybe this lap is bug or i summary the network is wrong. noted sumary network that you practice will sumary the network in real exam in to one subnet . as requirement need to contain 2 subnets. so make sure you can summary network by yourself .
-i’m very surprise when we can use tab and ? to show detail what is command used for in simulation :D . maybe the new update from cisco .
Noted : this is what i have done in my exam in morning and my country Cambodia is in Asia . and i dun no the change will be happen to your region or not. :) thank guy see you in certprepare.

-new question about framrelay and stateful NATv6 (only 2).

@Roy
is the command

ip summary-address eigrp 123 10.2.0.0 255.255.0.0

applicable?

What command did you use?

Congrats to all who have passed.

Is there any one in Canada or US that has used EON/Dokdo dumps and have had success?

Thans

@Roy

was question about Technologies used in preparing Service Provider IPv6?

6RD or DS Lite ?

@Roy

Sorry I misunderstood your comment. I now understand it had nothing to do with service providers IPv6

I am Taking the Test in 3 Hours.

I have studied ORDONEZ/EON/DOKDO (very little difference between them)

I know the 3 sims SOLID

I know the 5 drag and drops SOLID

I have also studied another file I got from here back in December. I think it was called procyber. I studied that one for a while, then I started looking at ORDONEZ/EON/DOKDO.

I will let you guys know how I do.

If there is any last minute advice, please let me know.

thanks

anxious….

Hi, people. I was just coming through to check on the updates to see what else is new on the exam though I cleared it last month. I notice that some answers being provided by dumps or contributors keep changing for the same questions over time from last year even. I strongly advice please just don’t take someone’s word for it, do your own thorough research on each question and concepts.. it’s not to discredit the info. I have confidence in most of the info/dumps.. just well intentioned advice if you need it

All the Best!

So many dumps don’t know which one is correct plz guide

Hi everybody

Where is dexter, eon, wbs, dokdo files

Please help me

Hi everyone , today i passed CCNP ROUTE 300 101 , Dexter Dump`s are 60% Valid, EON dump is the newer, i got a drag and drop question not seen in EON dump many question has changed, so study a lot guyz

Just a question, in this new version of the exam, no there are more sims? is only questions?

the sims are the same

Took the exam.

I studied ORDONEZ/EON/DOKDO (very little difference between them)
I knew the 3 sims SOLID
I knew the 5 drag and drops SOLID

A few questions were kinda different and now quite clear but a pass is a pass

Grats bro!

Will take the exam on 13.

For the EIGRP Stub, the subnet should be classful right?

Command
ip summary-address eigrp 123 10.2.0.0 255.255.0.0

WHERE IS ORDONEZ LINK

ORDONEZ DUMP PLS ?

@TakingTestAtIn3Hrs Congrats! Can u give us what is the passing percent of the dumps that u mentioned? I will planning to take the exam next week.