Share your ROUTE v2.0 Experience

please dont ever buy pass4sure stuff *****BIG NO NO***** not even single question in exam

@WSB

I got Dexter’s dumps and vce file from the link you posted.

Thank you!

Passed. 9xx

about ten new questions. Dexter+EON+Weirdo+Jitter+SKR=Lifesaver

Labs: PBR, Redistri, EIGRP Stub, EIGRP Sim.
DnD: dmvpn, lmi, router, etc.

@WSB
VCE file doesn’t open. says I have older version of VisualCertExam. Where can I download new version of vce?

When I read that DigitalTut answers are valid, do you mean Premium Members or just what’s on the main page?

Or DigitalTut questions are the same as Dexter dumps?

@Elias K. Grodin

Do you remember new questions?

Where can I get VCE version of dexter dumps and EON? Thanks in advance

Hi Guys,

Please help me out, where can i find Dexter dumps and EON’s dumps. I wana study both dumps, thanks in advance

@Jurli
show ip flow interface << the function
DnD all same

Hi guys ,,
,,
100% Guaranteed VALID passing Material
CCNA 200-125 LAtest Dumps
CCNP ROUTE 300-101 Latest Dumps
CCNP SWITCH 300-115 LAtest Dumps
CCNP TSHOOT 300-135 LAtest Dumps
CCIE R&S 400-101 LAtest Dumps

docs.google.com/document/d/1cp2vtCYSV_21JTZF9D14Ua2gHdijtZjfIDuyVT1NyJg/edit?usp=sharing

@Elias K. Grodin you mentioned EIGRP Sim? So you have 4 Lab?

@Bumble Bee did you only have 2 Lab? Redistribution and EIGRP Stub?

@Pink, yes friend, these two simulation only at my exam today

anyone knows similer website for 210-260 ccna security? Discussion and dump regarding ccna security?

One more thing to share, pass4sure is gone case, no question from pass4sure. They are so backdated. Dexter digitaltut will be enough. And must practice in some dilator like packet tracer or gns3 , and also understand the topics not just memorise, because 20 percent question can be twisted

Hi Guys,

I edited the EON file and I have been studying the previous pages and same questions with dexter and SKR

https://drive.google.com/open?id=10L7T8iGZ9bwkMUjfZJSMKNIYz1gCoZoA

Correct me if any wrong input thanks!

Included a DND for the LMI

Hi Bumble bee,

Can you take a quick look on the VCE I edited if the content is correct

Thanks @Bumble bee!

Can someone share the DND about DMVPN/HUB/SPOKE/mGRE/NHRP please. Thank you

@Pink
Sorry, 3. Redistri, EIGRP Stub, PBR. Details below:

======
EIGRP Stub
======

R3#show running-config
R3#configure terminal
R3(config)#router eigrp 123
R3(config-router)#no eigrp stub receive-only
R3(config-router)#eigrp stub
R3(config-router)#end
R3#show ip route

R4>enable
R4#configure terminal
R4(config)#interface s0/0
R4(config-if)#ip summary-address eigrp 123 10.2.0.0 255.255.0.0

R3#show ip route

2 subnets

But in your real exam, if you see the line “10.0.0.0/8 is a summary,….Null0” then you need to summary using the network 10.0.0.0/8 with the command “ip summary-address eigrp 123 10.0.0.0 255.0.0.0” . This configuration is less optimize than the first but it summaries into 2 subnets as the question requires (maybe you will not see this case, don’t worry!).

======
OSPF Redistribution
======

R2#show interface s0/0/0

Bandwidth=1544 Kbit, Delay=20000 us, Reliability=255, Load=1, MTU=1500 bytes

R2#config terminal
R2(config)# router ospf 1
R2(config-router)# redistribute eigrp 100 metric-type 1 subnets
R2(config-router)#exit
R2(config-router)#router eigrp 100
R2(config-router)#redistribute ospf 1 metric 1544 2000 255 1 1500

R3#show interface fa0/0

Bandwidth=10000 Kbit, Delay=1000 us, Reliability=255, Load=1, MTU=1500 bytes

R3#config terminal
R3(config)#router ospf 1
R3(config-router)#redistribute eigrp 100 metric-type 1 subnets
R3(config)#exit
R3(config-router)#router eigrp 100
R3(config-router)#redistribute ospf 1 metric 10000 100 255 1 1500

Finally you should try to “show ip route” to see the 172.16.100.1 network (the network behind R4) in the routing table of R1 and make a ping from R1 to this network.

Note: If the link between R2 and R3 is FastEthernet link, we must put the command below under EIGRP process to make traffic from R1 to go through R3 (R1 -> R2 -> R3 -> R4), which is better than R1 -> R2 -> R4.

R2(config-router)# distance eigrp 90 105

======
PBR
======

BorderRouter(config)#access-list 101 permit tcp any any eq www

BorderRouter(config)#route-map pbr permit 10
BorderRouter(config-route-map)#match ip address 101
BorderRouter(config-route-map)#set ip next-hop 10.1.101.1
BorderRouter(config-route-map)#exit

BorderRouter(config-route-map)#exit
BorderRouter(config)#int fa0/0
BorderRouter(config-if)#ip policy route-map pbr
BorderRouter(config-if)#exit
BorderRouter(config)#exit

BorderRouter#show route-map

In the output you will see the line “Policy routing matches: 9 packets…”. It means that the route-map we configured is working properly.

Drag n Drop, valid per 5/2/18
===================

LMI
Address registration – allows neighbouring cisco devices to exchange the management ip addresses
Global addressing – Enables Frame Relay to identify interfaces in same manner as LAN
Multicasting – provides most efficient transmission of routing protocol messages and support address resolution
simple flow control – supports devices that are unable to use congestion notification
Virtual circuit – Prevents data from being transmitted in Black Hole

IPv6 Security
IPv6 traffic Filtering
It filters traffic at the interface level
It supports tagged ACLS
IPv6 Access Classes
It controls traffic to and from the router
It requires the destination address of the inbound traffic to be a local address.
It filters management traffic

Router
Passes logon information to the TACAS+ server
Prompts the user for username and password
TACACS+ Server
Authenticates the user
Authorises the user
User
Attempts to access the router
Provides access credentials

Frame Relay components
+ SVC: A circuit that provides temporary on-demand connections between DTEs
+ LMI: A signaling mechanism for Frame Relay devices
+ DLCI: A locally significant ID
+ FECN: An indicator of congestion on the network
+ PVC: A logical connection comprising two endpoints and a CIR

mGRE: Protocol to connect multiple destinations
IPSec: Protocol used to secure connection
Keepalive: Used to keep other side if tunnel interface up with local side is up
Tunnel Key: Used to authenticate connection
MSS: Amount of data that a device can handle as unfragmented piece

DMVPN
hub -> there is a word (next-hop server)
spoke -> “device …. dynamic address”
nhrp -> ” protocol
mgre -> “multi tunnel endpoint”

Hi all,
Successfully completed the exam today with 8** marks.
Thank you very much, @Dexter @EO @Digitaltut @Weirdo @Werewolf and thanks for all who contributed to this page.
DnD – LMI, DMVPN, Router-TACACS-User, Frame Relay ( SVC, DLCI, PVC, FECN, LMI).
SIMs – EIGRP stub, EIGRP ospf redistribution, PBR.
pls read the Sims and understand the concept clearly. Then it will be easier. Read the new questions from the earlier comments & DnD, read Dexter and EO dumps. It will be easier to clear.

Thanks once again and all the best for all.

Jitter
====

1 . Choose 2 methods for migrating routing protocols ( Choose two )
A. Changing AD Distance
B. Redistributing
Answer : AB
2. Choose best IP SLA deployment cycle that reduce deployment ( Choose Three)
A. Baseline Network performance,
B. Understand Quality results
C. Fine tune and simplify
D. Quality results.
F. etc…
Answer : ACD
Answers: Baseline Network performance, Understand Baseline performance, fine tune, quality results.
Read about this question here: https://www.cisco.com/en/US/technologies/tk648/tk362/tk920/technologies_white_paper0900aecd8017531d.html
3. One new question with choose correct statement about nat. You will see configuration of nat with nat pool (Dynamic Nat)
Answers: There were list config for private add. 2 similar options for this list.
Correct answer has to be with a word “inside local”.
Second correct options you will something “this list will be translated to this subnet
DO not choose it translates one-to-one
4. What Snmp v2c use for authentication?
A. HMAC-MD5
B. HMAC-SHA
C. CBC-DES
D. Community strings
Answer : D
5. What authentication type is used by SNMPv2?
A. HMAC-MD5
B. HMAC-SHA
C. CBC-DES
D. community strings
Answer : D
6. One long question something like router get IPv6 infomation from ISP. Now it have to distribute name server and other options to hosts.
Answer: Stateful DHCPv6
7. Question about Ipv6 eigrp features supported (choose 2)
A. Scaling
B. Partial updates
C. etc..
D. etc..
Answer : AB
8. Which security level is supported throughout all SNMP versions?
A. AuthPriv
B. AuthNoPriv
C. noAuthNoPriv
D. AuthNoPriv
Answer : C
9. Question about PPPOE features (Choose two).
Options are PADO, PADI, PADR etc
Answers: PADR(PPPoE Active Discovery Request)
PADI (PPPoE Active Discovery Initiation)
ABOUT THE PPPoE:
Expanding off potential new question where people are talking about [PADO/PADI] — this refers to PPPoE:
PPPoE requires certain signals and information to establish, accept, control and terminate the session. The basic signalling is shown below.
A PADI (PPPoE Active Discovery Initiation) broadcast signal is sent by the host to the remote devices.
A PADO (PPPoE Active Discovery Offer) signal is sent by the remote device back to the host.
A PADR (PPPoE Active Discovery Request) unicast signal is sent by the host to the remote device.
A PADS (PPPoE Active Discovery Session-Confirmation) is sent by the remote device back to the host.
A PADT (PPPoE Active Discovery Terminate) signal is sent to terminate a PPPoE session. It is the proper way to terminate a session but is not the actual cause for the
termination. The cause may be a simple timeout, a manual request by either end, or an out of spec line condition.
10. Using new backup router in spite of faulty one in OSPF domain but relationship with neighbor in one interface only not working, what is the reason of this problem? (Choose two)
A. Area ID mismatch
B. Authentication mismatch
C. process id of OSPF not match
D. OSPF timers not match
E. MTU mismatch
Answer : DE
11. Regarding a diagram with 3 routers (H1(with IPv6 IP and Loopback 1.1.1.1) +R1 (with IP IPv6 and Loopback 2.2.2.2) +R2 (with IP IPv6 and Loopback 3.3.3.3)
running with EIGRP 100 on both routers and what command you will implement so that you will see the loopback IP of R2 to be advertised at H1
A. H1(config t)#router eigrp 100
H1(config t)#no stub only
B. R2(config t)#router eigrp 100
R2(config t)#no stub receive only
C. H1(config t)#ipv6 router eigrp 100
H1(config t)#no stub only
D. R2(config t)#ipv6 router eigrp 100
R2(config t)#no stub only
Answer :
12. What will be shown when you do the “show track 1”?
A. Information statistics
B. Information of track list 1
C. Information of track list object 1
D. information about the IP route track table
Answer : B
13. Which type of information is displayed when a network engineer executes the show track 1 command on the router?
A. Tracking information statistics.
B. Information about tracking list 1.
C. Information about track list object 1
D. (I forgot)
Answer : B
14. Configuration snippet that looks similar to this:
ip access-list 1 permit xx xx
ip nat inside source list 1 int fa0/0 overload
What is this an example of?
A. static NAT
B. something about the ACL
C. PAT
D. dynamic NAT
Answer: C
15. Refer to the exhibit. How can you configure a second export destination for IP address 192.168.10.1?
A. Specify a different TCP port
B. Specify a different UDP port
C. Specify a VRF
D. Configure a version 5 flow-export to the same destination
E. Specify a different flow ID
Answer: C
16. In which scenario can asymmetric routing occur?
A. active/active firewall setup
B. single path in and out of the network.
C. active/standby firewall setup
D. redundant routers running VRRP
Answer: D , Dexter’s dump is A
17. What from the following can cause an issue for URPF? (this could be single answer or multiple choice)OR Reasons why urpf may fail:
A. Assymetric routing
B. Cef not enabled
C. Urpf not applied to the traffic source
D. If it is used as ingress filtering
Answer: A
18. What does radius server combine ?(choose two)
A. Telnet
B. Authentication
C. Accounting
D. Authorization
E. SSH
Answare: BD
19. Which two statements about NHRP in a DMVPN environment are true? (Choose two)
A. It requires each endpoint to have a unique network ID
B. It routes traffic through the tunnel
C. It can identify PIM-SM RPs over a tunnel
D. It can authenticate VPN endpoints
E. It provides address resolution to route traffic
Answer: D and E
20. A network engineer configures two connected routers to run OSPF in Area 0; however, the routers fail to establish adjacency. Which option is one of the caused for this issue?
A. Area numbers match.
B. OSPF process numbers do not match on both neighbor routers.
C. The Same MTU sizes are configured on both sides.
D. The Same OSPF router IDs are configured on both routers.
Correct Answer: D
21. IP CEF load-sharing options
A. Tunnel
B. Universal
C. Include-ports
D. Source
E. Destination
Answer: ABC
22. Question with network toplogy, it is OSPF network and the router is redistributing RIP. Question is how to summarize those routes.
Answer: You do summarization on ASBR so the answer is #summary-address
23. A topology with eigrp, a Hub and two spokes, where the loopback of the spokes are not seeing each others.
Answer: Disable split horizon on the hub
24. Two limitations when use NPTv6 for IPV6 to IPV6 Address translation?
A. stateful address translation
B. a limit of 32 1-to-1 translations
C. lack of overloading functionality
D. identify all interfaceas NAT inside or outside
E. 1-to-1 prefix rewrite
F. mismatched prefix allocations
Answer: C F
25. A packet capture log indicates that several router solicitation messages were sent from a local host on the IPv6 segment. What is the expected acknowledgment and its usage?
A. Router acknowlegment messages will be forwarded upstream, where the DHCP server will allocate addresses to the local host
B. Router on the IPv6 segmenet will respond with an advertisment that provides an external path from the local subnet, as well as certain data, such as prefix discovery
C. Duplicate Address Detection wil determine if ant other local host is using the same IPv6 ddress for communication with the IPv6 routers on the segment
D. All local host traffic will be redirected to the router with the lowest ICMPv6 signature, which is staticaly defined by the network administrator.
Answer: B
26. Features of Netflow version 9?
A. Cisco proprietary
B. IEEE standard
C. IETF
Answer: C
27. Features of Netflow version 9? (Choose 2)
A. IEEE standard
B. IETF standard
D. Ingress only
E. Egress only
F. Ingress/egress
Answer : BF
28. Using new backup router in spite of faulty one in OSPF domain but relationship with neighbor in one interface only not working, what is the reason of this problem? (Choose two)
A. Area match ===> they revised it from Dexter dumps (area id mismatch)
B. Authentication match ==== they revised it from Dexter dumps (authentication mismatch)
C. Process id of OSPF not match
D. OSPF timers not match
E. MTU mismatch
Answer : DE
29 . Which two commands do you need to implement on the CALLING router to support the pppoe client ? (choose Two)
A. Peer default ip address pool
B. MTU
C. bba-group pppoe
D. pppoe enable group
E. pppoe-client dialer-pool-number
Answer: B and E
Cisco is revising the questions so that many will confuse. Please see dexter dumps question related to this example.
QUESTION 82 : Using new backup router in spite of faulty one in OSPF domain but relationship with neighbor in one interface only not working , what is the reason of this problem? (Choose 2)
Dexter ITC
A. area Id mismatch
B. authentication mismatch
C. process id of ospf not match
D. ospf timers not match
Correct Answer: AD
New Exam Questions
Using new backup router in spite of faulty one in OSPF domain but relationship with neighbor in one interface only not working, what is the reason of this problem? (Choose two)
A. area match ===> they revised it from Dexter dumps (area id mismatch)
B. authentication match ====> they revised it from Dexter dumps (authentication mismatch)
C. process id of OSPF not match
D. OSPF timers not match
E. MTU mismatch
Correct answer is DE
30. Question with network toplogy, it is OSPF network and the router is redistributing RIP. Question is how to summarize those routes.
Answer: Summary-address
31. What is true about peer groups? (Choose two)
A. Optimize backdoor routes
B. If you change configuration then it effects all peers in the group
C. Peer groups can send soft updates to all
D. Updates can be sent with multicast
Answer : C and D
32. Which two statements about password-protecting device access are true? (Choose two)
A. The more system:running-config command displays encrypted passwords in clear text
B. The service password-encryption command forces a remote device to encrypt the password
C. A network administrator can recover an encrypted password
D. The privilege level command controls the commands a specific user can execute
E. The password can be encrypted in the running configuration
Answer : D and E
33. What does the command show ip netflow display ?
A. Netflow on the router
B. Not sure of other options
Answer : A
34. Which encapsulation supports an interface that is configured for an EVN trunk?
A. 802.1Q
B. ISL
C. PPP
D. Frame Relay
E. MPLS
F. HDLC
Answer: A
35. Which three TCP enhancements can be used with TCP selective acknowledgments? (Choose three)
A. Header compression
B. Explicit congestion notification
C. Keepalive
D. Time stamps
E. TCP path discovery
F. MTU window
Answer: BCD
36. Which three problems result from application mixing of UDP and TCP streams within a network with no QoS? (Choose three.)
A. starvation
B. jitter
C. latency
D. windowing
E. lower throughput
Answer: ACE
37. Which option is invalid when configuring Unicast Reverse Path Forwarding?
A. allow self ping to router
B. allow default route
C. allow based on ACL match
D. source reachable via both
Answer: D
38. In a point-to-multipoint Frame Relay topology, which two methods ensure that all routing updates are received by all EIGRP routers within the Frame Relay network? (Choose Two)
A. Use statically defined EIGRP neighbors on the hub site.
B. Create separate address families.
C. Disable split horizon.
D. Use subinterfaces.
E. Disable EIGRP auto summary.
Answer : CD
39. A network engineer recently deployed Easy Virtual Networking in the enterprise network. Which feature improves shared services support?
A. Route replication
B. Rdge interfacing
C. Tunnel feedback.
D. Route distinguishers
Answer: A
40. If you run the command auto-cost reference-bandwidth 10000 one one of the router in the network, what will happen ?
Choose one option:
A. It will make 10Gbps on all of them
B. It will make 1 Gbps on all of them
C. dont remember
Answer : A

SKR
====

Which statement about local policy routing is true?
A. It is used to policy route packets that are generated by the device.
B. It requires all packets to be packet switched.
C. It is used to policy route packets that pass through the device.
D. It requires all packets to be CEF switched.
E. It supports IPv4 packets only.
F. It requires an ip address or access list as the matching criteria.
Correct Answer: A
How route tags can be set? (Choose two)
A. only with route-maps
B. only with taglists
C. can be set with route-maps
D. can be set with taglist.
E. only used on link state RPs.
Correct Answer: CD
Which type of message does a device configured with the eigrp stub command send in response to EIGRP
queries?
A. invalid request
B. unavailable
C. stuck in active
D. stub-only
E. reject
F. inaccessible
Correct Answer: F
Which two statements about route targets that are configured with VRF-Lite are true? (Choose two)
A. Route targets uniquely identify the customer routing table
B. Route targets control the import and export of routes into a customer routing table
C. Route targets are supported only when BGP is configured
D. When IS-IS is configured, route targets identify the circuit level in which the customer resides
E. When BGP is configured, route targets are transmitted as BGP standard communities
F. Route targets allos customers to be assigned overlapping adresses
Correct Answer: BC
Refer to Exhibit. R1 is unable to ping interface S0/0 of R2.
What is the issue the configuration that is shown here?
A. The route-target configuration command is missing.
B. The interface IP addresses are not in the same subnet.
C. the syntax of the ping command is wrong.
D. The default route configuration is missing.
E. The serial interfaces belong to the global table instead of vrf Yellow.
Correct Answer: E
Which TCP port for BGP?
A. port 161
B. port 123
C. port 179
D. port 47
Correct Answer: C
OSPF chooses routes in which order, regardless of route’s adminstrative distance and metric? (choose six)
A. Intra-Area (O)
B. Inter-Area (O IA)
C. External Type 1 (E1)
D. External Type 2 (E2)
Dexter ITC
E. NSSA Type 1 (N1)
F. NSSA Type 2 (N2)
Correct Answer: ABCDEF
Which two statement about GRE tunnel interface are true? (Choose two)
A. A tunnel can be established when a source the source interface is in the up/down state
B. A tunnel Destination must be Routable, but it can be unreachable
C. To establish a tunnel the source interface must be a loopback
D. To Establish a tunnel the source interface must be up/up state
E. A tunnel destination must be a physical interface that is on up/up state
Correct Answer: BD
A network engineer recently deployed Easy Virtual Networking in the enterprise network.
Which feature improves shared services support?
A. route replication
B. edge interfacing
C. tunnel feedback.
D. route distinguishers
Correct Answer: A
Which two protocols can be affected by MPP? (Choose two)
A. POP
B. SMTP
C. HTTP
D. SFTP
E. SSH
Correct Answer: CE
Which command sequence can you enter a router to configure Unicast Reverse Path Forwarding in loose mode?
A. interface GigabitEthernet0/0
ip verify unicast source reachable-via loose.
B. interface GigabitEthernet0/0
ip verify unicast source reachable-via all.
C. interface GigabitEthernet0/0
ip verify unicast source reachable-via any.
D. interface GigabitEthernet0/0
ip verify unicast source reachable-via rx.
Correct Answer: C
If you configure one router in your network with the auto-cost reference bandwidth 100 command, which effect
on the data path is true?
A. The data path remains the same for all links.
B. The data path changes for 10 Mbps links only.
C. The data path changes for all links.
D. The data path changes for 10 Gbps links only.
Correct Answer: A
Which option to the command service timestamps debug enables the logging server to capture the greatest amount of information from the router?
A. uptime
B. show-timezone
C. year
D. msec
Correct Answer: D
A network engineer executes the show ip sla statistics command.
What does the output of this command show?
A. Operation availability
B. device CPU utilization
C. interface packet statistics.
D. packet sequencing
Correct Answer: A
Two aspects of an IP SLA operation can be tracked: state and reachability. Which statement about state
tracking is true?
A. When tracking state, an OK return code means that the track’s state is up; any other return code means
that the track’s state is down.
B. When tracking state, an OK or over threshold return code means that the track’s state is up; any other
return code means that the track’s state is down.
C. When tracking state, an OK return code means that the track’s state is down; any other return code means
that the track’s state is up.
D. When tracking state, an OK or over threshold return code means that the track’s state is down; any other
return code means that the track’s state is up.
Correct Answer: A
Which type of information is displayed when a network engineer executes the show track 1 command on the
router?
A. information about tracking list 1.
B. time to next poll for track object 1.
C. information about the IP route track table.
D. tracking information statistics.
Correct Answer: A
When using SNMPv3 with NoAuthNoPriv, which string is matched for authentication?
A. username
B. password
C. community-string
D. encryption-key
Correct Answer: A

I studied in one week from Weirdo answer (several pages back, cannot reposted again, dunno why), SKR answer (I’ve reposted above), Jitter answer (I’ve reposted above), EON dump (76q, search in several pages back, PDF & VCE available), Dexter dump (400q, search in several pages back, PDF & VCE available), Lab Sim from digitaltut (Redistri, Stub, PBR). Study throughly, pray, and you will pass.

Finally I got my CCNP RS. My path: switch(mid ’17)-tshoot(late ’17)-route(early ’18). All completed in less than one year. And this late February will be 1st anniversary of my CCNA RS.

Still need to prove my certificates in real word though. :)

Best luck to y’all!

@Elias K. Grodin BIG THANKS! Yes I saw this questions on previous pages

congrats R1TH1….. i am a premium member, pls could you send me or direct me to the link for the EOM dump. thanks. I have rescheduled for Sat

@Pink
Good Luck!

@cocoa
check page 83-86, there’s EON link.

passed with 956 Route ,
all questions from EON dump and dexter dump , some of them had the options changed in order and some reworded , but the same , except within 4~6 new Q not in both dump

exam >> 53 Q ,

5 DND >> (LMI // Frame Relay components // Router, User and AAA Server //DMVPN, hub, spoke, nhrp and mGRE )

3 LAB >> (PBR, Eigrp Stub with summarization and Redistribution).
Note: in Redistribution the most probably you will find the link between R2 and R3 is Fast-Ethernet link, we must put the command below under EIGRP process to make traffic from R1 to go through R3
R2(config-router)# distance eigrp 90 105

** Also Note : the show run works but the copy run start not
So don’t worry when you try to save config, cause a msg “comand not implemented” will appear ,,, just skip & go on .

>> “Tap button ” not work .
————————————————————————-
EON Dump >>> 58 New Question within 20~25Q in exam
vce

https://drive.google.com/file/d/1GqnbXSaBUcAQHg0srK3I3Zlj0NFDfe9p/view

Dexter Dump
https://drive.google.com/drive/folders/0B-ttQLaH7JsgdkNYT1otVklCNE0

thanks Elias!

Can anyone confirm whether or not the EON dump is sufficient enough to study alone? I know they generally pull questions at random from a large repository of questions, but I’m sure over time, many of the questions in the dumps become invalid and are removed from the batch. Has anyone ONLY studied the EON dump and passed? How accurate was it? THANKS!!

@Elias K. Grodin
Could you please share with us the questions appeared in your exam?
I have an exam in a couple of days.
Will be very thankful to you.

@Ordonez
Bro I downloaded the file but couldn’t work, when i started its showing request exam key and then Error.
Could you please check the file. Thanks

@ Elias K. Grodin, First of all I would like to say thanks for sharing. I have ” PASS LEADER ” version 17.081 (470Q), which was valid till Dec first week, Does it still valid? please advise. I am reading this stuff since dec 1st and planning to give exam soon.

@Bumble bee
Take a look here http://www.securitytut.com/

Good Luck

@Elias K. Grodin thank you!

@Eigrp Stub, thanks a lot my friend :)

@Ordonez

What should I use to open this file? I purchased the vce player and it is not opening it. Can you please give me some advice? Many thanks

@seven7
No. You should read my comment above. EON dump alone won’t help.

@2PAC
I have share it all above.

@ccnp_route
Is it dexter dump? if yes, it’s still valid. if no, search dexter dump. Or you can read my comment above.

@ALL
if the vce’s not working then you should check the original EON’s vce, several pages back, around 83-85. Mine’s working, on desktop vce player, and android vce player.

Hi guys and girls :) good news I passed, I don’t know there is some thing wrong with this page my comments disappears I don’t know where the admins are….????

BIG THANKS TO DIGITALTUT, DEXTER, EON AND OTHER PARTICIPANTS
45 x MCQs: Majority Dexter and EON dumps.

Total 53 Questions
3 x Labs: PBR, EIGRP/OSFP Redistribution & EIGRP Stub (Sh Run works , no need to worry about to save your configurations)
5 x DnDs:
LMI
Address registration – allows neighbouring cisco devices to exchange the management ip addresses
Global addressing – Enables Frame Relay to identify interfaces in same manner as LAN
Multicasting – provides most efficient transmission of routing protocol messages and support address resolution
simple flow control – supports devices that are unable to use congestion notification
Virtual circuit – Prevents data from being transmitted in Black Hole

Router
Passes logon information to the TACAS+ server
Prompts the user for username and password
TACACS+ Server
Authenticates the user
Authorises the user
User
Attempts to access the router
Provides access credentials

Frame Relay components
+ SVC: A circuit that provides temporary on-demand connections between DTEs
+ LMI: A signaling mechanism for Frame Relay devices
+ DLCI: A locally significant ID
+ FECN: An indicator of congestion on the network
+ PVC: A logical connection comprising two endpoints and a CIR

mGRE: Protocol to connect multiple destinations
IPSec: Protocol used to secure connection
Keepalive: Used to keep other side if tunnel interface up with local side is up
Tunnel Key: Used to authenticate connection
MSS: Amount of data that a device can handle as unfragmented piece

DMVPN
hub -> there is a word (next-hop server)
spoke -> “device …. dynamic address”
nhrp -> ” protocol
mgre -> “multi tunnel endpoint”

@Ordonez I am interested in your file, can you put in PDF I can not open the file in your format
many thanks

@Ordonez The file you uploaded is not compatible because of the high program version

@WBS congratulations:)
Dexter and EO Dumps enough to pass?? Except DND LAB

@WBS

Great Job!

You didn’t get any EIGRP or OSPF Simlets?

if you do all 5 DnDs and three Labs plus dexter first and EON after then yes you are right you can pass

thank you :) no evaluation sims

i have completed ccna next which dump is available route or switch ?

Try to install the VCE as i included it inside and created the VCE using that version

https://drive.google.com/open?id=1jrmSQZRx52lyL4z1wap1PxVM-MVot9Wd