Share your ROUTE v2.0 Experience

@Mr.Jeonghun
Could you also email me the Dexter’s dump please
kikavich AT yahoo com

https://drive.google.com/open?id=1CxU7YJisG4hwPsdvklaZ0EWgDMw3FPiJ

does anyone have vce player for mac os?

can someone email me Dexter’s dump? {email not allowed}

norcalguy39 AT yahoo com

@Mr.Jeonghun
Could you also email me the Dexter’s dump please
nurwanreza79 AT gmail.com

hahahaha…..

Thank you Dexter, E0, Weirdo and everyone most especially DigitalTut, you guys are doing a great job. I took my test today and passed! Thanks a million guys!

https://drive.google.com/open?id=1AFl4Vc9Gyy7HJHVffSh6p0Fl09kx011s

Dexter’s dump

Hi, is there anyone here who could share link for a quick reference guide? thanks in advance..

@ Sméagol

on the ospf and eigrp resdistrubution did you use router ospf 1 ?

@netcrazy
You must check process ID which ospf running

Using new backup router in spite of faulty one in OSPF domain but relationship with neighbor in one interface only not working, what is the reason of this problem? (Choose two)
A. area ID mismatch B. authentication mismatch C. process id of OSPF not match D. OSPF timers not match
Answer: A B D (?)

A route map was configured and it was distributing OSPF external routes.
A. Distributing E1 only B. Distributing E1 and E2 using prefix list C. Distributing E1 and E2 using access list D. Distributing E2 routes
Answer: B according to digital tut

Can any one confirm the answer?

Access list is for traffic filtering & prefix list is for route filtering. B is Correct.

can any one confirm #Using new backup router in spite of faulty one in OSPF domain but relationship with neighbor in one interface only not working, what is the reason of this problem? (Choose two)
A. area ID mismatch B. authentication mismatch C. process id of OSPF not match D. OSPF timers not match
Answer: A B D (?)

@Anonymous: the answers on your question was mixed, by forum users. Generally you could have one or two right answers, in your 3 answer ABD are all valid. The other options you can find for this question are “Area Match”, “Authentication Match”, *”MTU mismatch”.. So in your exam read carefully!!

Hi!

Everyone here!!!

This site has much and much spam now.

I just created one WA Group for talking the CCNP exams — 300-101/300-115/300-135…etc.

bit-ly/ccnp-study-share-group

~~~~~~~~~~~~~~~~~~

bit-ly/ccnp-study-share-group

(copy that short link and open it in your web browser!!!)

(Replace the first “-” to “.”)

Good luck, all!!!

Passed the exam with Dexter’s dump (thanks a lot!). PBR, redistribution, ospf and 2 simlets. Lots of drag and drop and ipv6 questions. Be prepared , exam is not easy.

I have synthesized the problems so far effective.

It is a dump that is 80% or more.

https://drive.google.com/file/d/1SqNW2h6HA6S-SLAbVPdn4MKJ5slcP56z/view?usp=sharing

new dump EON 76q

new 76q dump

https://drive.google.com/open?id=1SqNW2h6HA6S-SLAbVPdn4MKJ5slcP56z

@EON can you please share file that supports 1.1.2 version VCE player
I can’t open this one with my version
Thanks

The enterprise network WAN link has been receiving several denial of service attacks from both IPv4 and IPv6
sources.
Which three elements can you use to identify an IPv6 packet via its header, in order to filter future attacks?
(Choose three.)
A. Traffic Class
B. Source address
C. Flow Label
D. Hop Limit
E. Destination Address
F. Fragment Offset ????

@EON can you please share file that supports 1.1.2 version VCE player
I can’t open this one with my version
Thanks

+1

vce + new dump(EON)

https://drive.google.com/open?id=1GqnbXSaBUcAQHg0srK3I3Zlj0NFDfe9p

@EON does this dump contain only the new questions?

sad who they turn this site to a spam one they need an admin so badly to stop these spammers

@ship

I tried to come out of the exam.

The above data does not include dnd, sim, because it exists in the tut.

I saw an EON dump.
It vaild 90%.

@EON thanks mate :)

@EON thank you!!

@EON

Real vaild??

@EON

Thank you very much on the dumps you provided and your effort. The questions look like they are including some latest question.

just a couple questions on dump need addressing:

Q45 How route tags can be set?

A.only with route-maps
B.only with Taglist
C.can be set with route-maps
D.can be set with taglist
E.only used on link state RPs

Correct Answer: C D

@Some

are you able to recall any DNDS? Questions? Please provide some information for the tut community.

@ Bumble bee

The enterprise network WAN link has been receiving several denial of service attacks from both IPv4 and IPv6
sources.
Which three elements can you use to identify an IPv6 packet via its header, in order to filter future attacks?
(Choose three.)
A. Traffic Class
B. Source address
C. Flow Label
D. Hop Limit
E. Destination Address
F. Fragment Offset ???

Correct answer : A C D

am i the only one seeing only 59 questions?…
please help?

Last week Digitut users reported the DNDs were the ones below:

LMI

Address registration – allows neighbouring cisco devices to exchange the management ip addresses
Global addressing – Enables Frame Relay to identify interfaces in same manner as LAN
Multicasting – provides most efficient transmission of routing protocol messages and support address resolution
simple flow control – supports devices that are unable to use congestion notification
Virtual circuit – Prevents data from being transmitted in Black Hole

IPv6 Security

IPv6 traffic Filtering
It filters traffic at the interface level
It supports tagged ACLS
IPv6 Access Classes
It controls traffic to and from the router
It requires the destination address of the inbound traffic to be a local address.
It filters management traffic

Router
Passes logon information to the TACAS+ server
Prompts the user for username and password
TACACS+ Server
Authenticates the user
Authorises the user
User
Attempts to access the router
Provides access credentials

Frame Relay components

+ SVC: A circuit that provides temporary on-demand connections between DTEs
+ LMI: A signaling mechanism for Frame Relay devices
+ DLCI: A locally significant ID
+ FECN: An indicator of congestion on the network
+ PVC: A logical connection comprising two endpoints and a CIR

mGRE: Protocol to connect multiple destinations
IPSec: Protocol used to secure connection
Keepalive: Used to keep other side if tunnel interface up with local side is up
Tunnel Key: Used to authenticate connection
MSS: Amount of data that a device can handle as unfragmented piece

@Hello

no you are not, there is only 59 from EONs dumps and contain new questions, Dexters dumps you will find posted on previous pages.

@EON

Hey, i only see 59 questions, i tried downloading again and all.. help?

@BU @EON
oh.. he said 76 new questions so i thought it’ll be 76..
anyways, BIG THANKS EON!

Dexters dumps are on page 84 posted by:

Netcrazy January 24th, 2018

here is the link where i got Dexter dumps

https://mega.nz/#F!tNtkSB5A!4Glpa9BrYDbAcAPsbtmDjA

cop and paste link in browser

Alhamdulillah pass today with 9xx

53Q study from dexter dump. in exam there is many new question maybe 10-12Q. and many new q is in here.
Lab : PBR, eigrp stub, redis, no sim eval

one of new q i remember is:
There is no word “only” in no stub
A question with illustration, having one hub two spokes, running EIGRP and loopbacks on all routers. Hub is able to see loopbacks of all the two spokes. Question asked why the spokes are not seeing each other’s loopbacks.
Answer: I chose answer that had something to do with, one of the spokes is configured with “eigrp stub receive only” [make sure the statement has the Router eigrp 100 statement followed by no stub…. or no split-horizon, depending on what choices you have]
a. H1(config t)router eigrp 100
H1(config t)no stub
b. R2(config t)router eigrp 100
R2(config t)no stub receive only
c. H1(config t)ipv6 router eigrp 100
H1(config t)no stub
d. R2(config t)ipv6 router eigrp 100
R2(config t)no stub
My Answer : D

The DND about DMVPN is (this is my answer)
hub -> there is a word (next-hop server)
spoke -> “device …. dynamic address”
nhrp -> ” protocol
mgre -> “multi tunnel endpoint”

Thanks a lot to dexter, jitter, weirdo an digitaltut. This website is awesome and goodluck everyone.

@EON @all
I cannot open the .vce, always gives me error after requesting key exam. How to open it? :(

Same with me, the eversion is 1.1.6 but when try to Start error pops up.

@Elias K. Grodin
Had the same problem on my computer so i downloaded one of the latest versions of vce to my phone and was able to open it there.

If anyone looking for Dexter dumps please follow the link below…
https://drive.google.com/open?id=1AFl4Vc9Gyy7HJHVffSh6p0Fl09kx011s

it’s not spam please

I can’t post even

@RGNC please what labs did you get in the exam…?