Share your ROUTE v2.0 Experience

Hey guys,
could you share the 2 DND :

1 – DMVPN
2 – IP SLA cycle deployment

Thanks

@jar could you share dumps plz
ahmedmadiboi @ yahoo .com

Just passed 9xx.
1) No any new-new questions. Only questions from Dexter’s dump (some questions are a bit changed).
2) Old new question are described above a lot of times.
3) In EIGRP summarization lab you MUST use a classful scheme ip summary-address 10.2.0.0 255.255.0.0
Don’t even try to use CIDR like 10.2.0.0 255.255.240.0 Yes, it is more correctly in the life and your command will be accepted but… will not work.
4) In Policy Base Routing Lab check your work after generating http traffic – use the command “show access-list”.
Guys and girls! Stop a panic! All questions are here on this site. But you MUST know not only answers but why you should select these answers. You must understand how network technologies are working. Even if you make a couple of mistakes you will pass! ;)
If you don’t understand network technologies you will fail and no any dumps are able to help you.
Goid luck! ;)

@Werewolf

Congrats ;)

about pbr lab.. why you did not used “show route-map .. ?

@Werewolf
24. Two limitations when use NPTv6 for IPV6 to IPV6 Address translation?
A. stateful address translation
B. a limit of 32 1-to-1 translations
C. lack of overloading functionality
D. identify all interfaceas NAT inside or outside
E. 1-to-1 prefix rewrite
F. mismatched prefix allocations

answer : C,E by dexter dump
which answer is correct?

@werewolf many congratulations and thank you for your contributions…

@Mr.jeonghun,

Could you please share me dexter dump?
thank you very much
catherine88goh gmail com

@Suiciderouter
I send you dexter’s dump.
plz check your gmail.

please share me new D&D question detail, DMVPN, IP SLA..

@Mr.Jeonghun
Could you also email me the Dexter’s dump please
ttciscohelp AT yahoo com

Hello @Werewolf

May you share PDF version of dexter dump?

Thank you

Can you send me please the dump
IHassan18 @ iCloud . Com

@FifaPlayer
Yes this is strange. In real life I would use “show route-map”. And in my exam this command was available via “?” but when I tried to use it I received “the command unrecognized”. So you shouldn’ t forget about “show access-list”.

@NeedHelp

I don’ t have a PDF version. Only VCL version. I posted the link several posts above.

@Mr.jeonghun

I didn’t have this question in my exam, but yes, correct.

@Werewolf
24. Two limitations when use NPTv6 for IPV6 to IPV6 Address translation?
A. stateful address translation
B. a limit of 32 1-to-1 translations
C. lack of overloading functionality
D. identify all interfaceas NAT inside or outside
E. 1-to-1 prefix rewrite
F. mismatched prefix allocations

You have answer that CF is correct for me?

Does anyone knows is there any Cisco Data Center Professional share your experience pages or valid dumps?

@Werewolf

31. What is true about peer groups? (Choose two)
A. Optimize backdoor routes
B. If you change configuration then it effects all peers in the group
C. Peer groups can send soft updates to all
D. Updates can be sent with multicast
Answer : C and D
but dexter’s dump answer is B,C
which answer is correct?
please inform me answer. i’m confused..

@NeedHelp

I have pdf version dump of dexter.
please inform me your address.

@ Mr.jeonghun
Can you send it to me also
My mail is: IHassan18 @ iCloud . Com
Thanks in Advance

@Mr.Jeonghun
Thank you. May you send it

k2far4me at hotmail . com

Plz respond to the questions of @Mr. and @murphy
i also confused ToT

@ Murphy
When use NPTv6 for IPV6 to IPV6 Address translation? (Choose two)
A. stateful address translation
B. a limit of 32 1-to-1 translations
C. lack of overloading functionality
D. identify all interface NAT inside or outside
E. one-to-one prefix rewrite
F. mismatched prefix allocations
Correct Answer: CE

—–> Dexter Dumps

please share dexter link here

CCNA done. Guys thanks for the help and support. Can anyone please share the latest dumps for route. Thanks in advance. I will really appreciate your help and support.

razibinwasi @ gmail . com

@ Werewolf:

Is it mandatory to generate web traffic or not ?
How to do to generate this traffic in the PBR lab please ?
I hear everywhere the lab can to fail if the wrong command have entered.

Thanks in advance for your answer.

31. What is true about peer groups? (Choose two)
A. Optimize backdoor routes
B. If you change configuration then it effects all peers in the group
C. Peer groups can send soft updates to all
D. Updates can be sent with multicast
Answer : C and D
but dexter’s dump answer is B,C
which answer is correct?
please inform me answer. i’m confused..

since BGP Dynamic Update Peer-Group feature requires no configuration and occurs automatically. When a change to outbound policy occurs, the router automatically recalculates update-group memberships and applies the changes by triggering an outbound soft reset after a 1 minute timer expires. … It seems B & C is Correct. Dexter is correct

any one confirm “What is true about peer groups? “

anyone send me dumps at gaurav5714749(attherate)gmail(dot)com

for redistribution lab which interface do we check to identify K values

12- If you configure one router in your network with the auto-cost reference bandwidth 100 command, which effect
on the data path is true?
A. The data path remains the same for all links.
B. The data path changes for 10 Mbps links only.
C. The data path changes for all links.
D. The data path changes for 10 Gbps links only.
Digital tut ans A and Dexter ans C. Which one correct?

@Anonymous
A is correct

hello all! I’d like to know if anyone can send me the Router dump to sandman0409 @ yahoo . com?

@weirdo
i didnt have that question >>

@joobii, what question?

@ Mr.jeonghun
can you please send me the route dump of dexter.
email: adnandotch @ gmail com (adnandotch same as it is.)

@Weirdo
can u please send me the route dumps…my exam is in few days…plz
E-mail:
adnan_ach @ hotmail com

@Chaudhary, okay i’ll send it.

@Weirdo can you help with the dumps that you used ?

Please do say a Big Thank You to Dexter he really worked hard with these dumps, good luck to all of you.

So far no one has given a clear answer for this question.

Question 19***Check carefully
A question with illustration, having one hub two spokes, running EIGRP and loopbacks on all routers. Hub is able to see loopbacks of all the two spokes. Question asked why the spokes are not seeing each other’s loopbacks.
Answer: I chose answer that had something to do with, one of the spokes is configured with “eigrp stub receive only” [make sure the statement has the Router eigrp 100 statement followed by no stub…. or no split-horizon, depending on what choices you have]
a. H1(config t)router eigrp 100
H1(config t)no stub only
b. R2(config t)router eigrp 100
R2(config t)no stub receive only
c. H1(config t)ipv6 router eigrp 100
H1(config t)no stub only
d. R2(config t)ipv6 router eigrp 100
R2(config t)no stub only
Answer: D ——————-> I believe this is wrong because Im not sure if there is a “stub only” option under “router eigrp x”

R1(config-router)#eigrp stub ?
connected Do advertise connected routes
leak-map Allow dynamic prefixes based on the leak-map
receive-only Set receive only neighbor
redistributed Do advertise redistributed routes
static Do advertise static routes
summary Do advertise summary routes

R1(config-router)#end

The right answer I believe has to be B
b. R2(config t)router eigrp 100
R2(config t)no stub receive only

Because receive only prevents the eigrp host from sending advertisements. Can someone confirm this ?

Eigrp isnt my strong point btw.

thanks for the dumps. However, is that 59Q legit or it’s just too little to cover the exam? any thoughts please? I just passed Switch exam, and i’d like to get this route exam done as well. Should I give myself to study more about Route then rush myself to take Route exam? Thank you guys all again!

@Mikko Riikonen,
Did you get 4 Lab and 7 D&D in your exam ? In previous post they confirm only 3 Lab and 5 D&D? please clarify?

@Mikko Riikonen

Labs/sims : IPV6 sim
-> you mean “IPv6 OSPF Virtual Link Sim” ?

@Hassan
when I give you mail, your mail can’t recognize.
please inform me other mail.

@NeedHelp
I send you dexter’s dump.
please check your mail

@ Cubs win 2019 again
you are correct i did find that on cisco’s website.

@everyone
I will have exam in Friday.
please inform me new D&D DMVPN detail info.

@Mikko Riikonen,

it looks like you just copied and pasted your comments from exam collections site, your not from the Netherlands by chance?

@Mikko Riikonen

sorry to say your information is out dated!

@Mr. Jeionghun
IHassan18 at icloud.com