Share your ROUTE v2.0 Experience

About question 6.
“One long question something like router get IPv6 infomation from ISP. Now it have to distribute name server and other options to hosts.”
Answer: Stateful DHCPv6 (maybe not correct)
someone remember other possible choices?

@maggi

yes i had:

1)LMI extension
2)Router, TACACS SERVR,USER
3)Frame Relay Components
4)DMVPN
5)IP SLA cycle deployment

no eval

@Werewolf and @Fifaplayer

There is cisco document saying that you can use different UDP port :

To configure multiple NetFlow export destinations to a router, enter the ip flow-export destination command twice, once for each destination. Do not enter the same ip address twice. However, entering two different ip addresses with the same udp port number is configurable.

https://www.cisco.com/c/en/us/td/docs/ios/12_0s/feature/guide/12s_mdnf.html

please if you have a resource where said they said to use vrf please share.

Re-read your post!
Do not enter the same ip address twice! However entering two different ip address with the same udp port is configurable.
So you cannot set
A.B.C.D port X and A.B.C.D port Y
But you can set
A.B.C.D port X and E.F.G.H port X

So you cannot use the same IP twice even with different ports, but you can use two different IP with the same port.

New Quesions!

Question 11
Choose best IP SLA deployment cycle that reduce deployment.
Answers: Baseline Network performance, Understand Baseline performance, fine tune, quality results.
read about this question here: https://www.cisco.com/en/US/technologies/tk648/tk362/tk920/technologies_white_paper0900aecd8017531d.html
———————————————
Question 12
One new question with choose correct statement about nat. You will see configuration of nat with nat pool (Dynamic Nat)
Answers: There were list config for private add. 2 similar options for this list. Correct answer 1) has to be with a word “inside local”. Second correct option you will something “this list will be translated to this subnet
(which is pool)”. DO not choose it translates one-to-one
———————————————
Question 13
What Snmp v2c use for authentication
Answer: com string
A. com string
B. Local String
C. One String
D. Comunication String
———————————————
Weirdo
Question 14
One long question something like, how do routers distribute prefixes obtained from ISPs using DHCPv6.
Answer: i didnt see any option like “Stateful Natv6”. If this option is not availabe, please choose “Stateful DHCPv6”
A. PPPv6
B. DHCP
C. Stateful Natv6
D. NPTv6
E. IPv4
———————————————
Question 15
One question about ipv6 eigrp features supported (choose 2)
Answer: Scaling and Partial Updates
A. Partial Updates
B. Complete Updates
C. Windows Update
D. Scaling and Partial Updates
———————————————
Question 16
Which authentication is present in all versions of SNMP
Answer: NoAuthNoPriv
A. NoAuthNoPriv
B. PrivAuthNo
C. NoAuthNoAcc
D. NoAuthNoEgress
———————————————
Question 17
Features of Netflow version 9 (Choose 2):
Answer: IETF standard and one option with “Ingress and Egress”
Weirdo
A. Standard IETF
B. Egress interface
C. IETF standard and one option with “Ingress and Egress”
D. Loopbacks
———————————————
Question 18
Question about PPPOE features (Choose two). Options are PADO, PADI, PADR etc
Answers: (PPPoE Active Discovery Request), PADI (PPPoE Active Discovery Initiation)
A. (PPPoE Active Discovery Request), PADI (PPPoE Active Discovery Initiation)
B. (PPPoR Active Discovery Request), PARP (PPPoE Active Discovery Initiation)
C. (PPPoE Active Discovery Reaching), PADI (PPPoE Active Discovery Initiating)
D. (PPP Active Discovery Request), PADI (PPP Active Discovery Initiation)
———————————————
Question 19***Check carefully
A question with illustration, having one hub two spokes, running EIGRP and loopbacks on all routers. Hub is able to see loopbacks of all the two spokes. Question asked why the spokes are not seeing each other’s loopbacks.
Answer: I chose answer that had something to do with, one of the spokes is configured with “eigrp stub receive only” [make sure the statement has the Router eigrp 100 statement followed by no stub…. or no split-horizon, depending on what choices you have]
a. H1(config t)router eigrp 100
H1(config t)no stub only
b. R2(config t)router eigrp 100
R2(config t)no stub receive only
c. H1(config t)ipv6 router eigrp 100
H1(config t)no stub only
d. R2(config t)ipv6 router eigrp 100
R2(config t)no stub only
Answer: D
———————————————
Weirdo
Question 20
Choose 2 methods for migrating routing protocols
Answers: Changing AD distance and Redistributing
A. Changing Metric and time
B. Changing Feasible Distance
C. Changing routing protocol
D. Changing distance and redistributing

I posted 10 some days ago

BTW Q20 D. Why??? Who can explain?

Passed Today with 92x
Most of the questions from above comments and remaining from the dump.
New DND LMI and DMVPN ( HUB , Spoke mGRE and NHRP )
LABs EIGRP Stub and Redistribute and PBR.

Great Site!

@failover, please share questions or edit to help others. Congrats!

@ werewolf
Thanks for the clearing that out regarding show ip sla.

anyone know where i can find IP SLA cycle deployment DND ?

hey guys i passed with 97+ on 28th of jan
no need to panic all questions are valid 35 to 37 are from old dumps and the new questions ALL are listed above ……
i was so scared but the exam was the SAME!!
just study the new DND (LMI, and DMVPN )
ABOUT THE DMVPN you can solve it with your eyes closed guarantee its easy
the LMI is sort of hard to me ….anyways i recomend to take the exams as soon as possible before they add the new VERSION…

and special thanks to all the previous comments about the new questionswithout you guys i wouldnt have done it…

study all weirdo questions most valid and i got 100% in VPN technologies and 100% on layer 2 and 3 technologies so if any questions just post and tag me ill give u the correct answers

@joobil
What did you answer for the question below?

Using new backup router in spite of faulty one in OSPF domain but relationship with neighbor in one interface only not working, what is the reason of this problem? (Choose 2)
A. area Id mismatch
B. authentication mismatch
C. process id of ospf not match
D. ospf timers not match

@weirdo where I can get all of your questions??? Please I need them. Is there any Gdrive link?

Guys, I understood!
The question
What from the following can cause an issue for URPF? (this could be single answer or multiple choice)
OR
Reasons why urpf may fail:
A.Assymetric routing
B.Cef not enabled
C.Urpf not applied to the traffic source
D.If it is used as ingress filtering

The correct answer is A 100%!!! The key words here are “MAY fail”. “May” means not 100%, but possible. And if CEF is not enabled then uRPF will not work absolutely and the word “may” cannot be used here. Your opinion?

please could someone help send me the dexter dumps so I can study that as well. Thanks everyone for the help

cloud(dot)mail(dot)ru/public/5CT8/Ej4tRz4QP

Mail me, i’d send them to you free :D

Below Qs from dumps in my exam.

Which statement about local policy routing is true?
A. It is used to policy route packets that are generated by the device.
B. It requires all packets to be packet switched.
C. It is used to policy route packets that pass through the device.
D. It requires all packets to be CEF switched.
E. It supports IPv4 packets only.
F. It requires an ip address or access list as the matching criteria.
Correct Answer: A

How route tags can be set? (Choose two)
A. only with route-maps
B. only with taglists
C. can be set with route-maps
D. can be set with taglist.
E. only used on link state RPs.
Correct Answer: CD

Which type of message does a device configured with the eigrp stub command send in response to EIGRP
queries?
A. invalid request
B. unavailable
C. stuck in active
D. stub-only
E. reject
F. inaccessible
Correct Answer: F

Which two statements about route targets that are configured with VRF-Lite are true? (Choose two)
A. Route targets uniquely identify the customer routing table
B. Route targets control the import and export of routes into a customer routing table
C. Route targets are supported only when BGP is configured
D. When IS-IS is configured, route targets identify the circuit level in which the customer resides
E. When BGP is configured, route targets are transmitted as BGP standard communities
F. Route targets allos customers to be assigned overlapping adresses
Correct Answer: BC

Refer to Exhibit. R1 is unable to ping interface S0/0 of R2.
What is the issue the configuration that is shown here?
A. The route-target configuration command is missing.
B. The interface IP addresses are not in the same subnet.
C. the syntax of the ping command is wrong.
D. The default route configuration is missing.
E. The serial interfaces belong to the global table instead of vrf Yellow.
Correct Answer: E

Which TCP port for BGP?
A. port 161
B. port 123
C. port 179
D. port 47
Correct Answer: C

OSPF chooses routes in which order, regardless of route’s adminstrative distance and metric? (choose six)
A. Intra-Area (O)
B. Inter-Area (O IA)
C. External Type 1 (E1)
D. External Type 2 (E2)
Dexter ITC
E. NSSA Type 1 (N1)
F. NSSA Type 2 (N2)
Correct Answer: ABCDEF

Which two statement about GRE tunnel interface are true? (Choose two)
A. A tunnel can be established when a source the source interface is in the up/down state
B. A tunnel Destination must be Routable, but it can be unreachable
C. To establish a tunnel the source interface must be a loopback
D. To Establish a tunnel the source interface must be up/up state
E. A tunnel destination must be a physical interface that is on up/up state
Correct Answer: BD

A network engineer recently deployed Easy Virtual Networking in the enterprise network.
Which feature improves shared services support?
A. route replication
B. edge interfacing
C. tunnel feedback.
D. route distinguishers
Correct Answer: A

Which two protocols can be affected by MPP? (Choose two)
A. POP
B. SMTP
C. HTTP
D. SFTP
E. SSH
Correct Answer: CE

Which command sequence can you enter a router to configure Unicast Reverse Path Forwarding in loose mode?
A. interface GigabitEthernet0/0
ip verify unicast source reachable-via loose.
B. interface GigabitEthernet0/0
ip verify unicast source reachable-via all.
C. interface GigabitEthernet0/0
ip verify unicast source reachable-via any.
D. interface GigabitEthernet0/0
ip verify unicast source reachable-via rx.
Correct Answer: C

If you configure one router in your network with the auto-cost reference bandwidth 100 command, which effect
on the data path is true?
A. The data path remains the same for all links.
B. The data path changes for 10 Mbps links only.
C. The data path changes for all links.
D. The data path changes for 10 Gbps links only.
Correct Answer: A

Which option to the command service timestamps debug enables the logging server to capture the greatest amount of information from the router?
A. uptime
B. show-timezone
C. year
D. msec
Correct Answer: D

A network engineer executes the show ip sla statistics command.
What does the output of this command show?
A. Operation availability
B. device CPU utilization
C. interface packet statistics.
D. packet sequencing
Correct Answer: A

Two aspects of an IP SLA operation can be tracked: state and reachability. Which statement about state
tracking is true?
A. When tracking state, an OK return code means that the track’s state is up; any other return code means
that the track’s state is down.
B. When tracking state, an OK or over threshold return code means that the track’s state is up; any other
return code means that the track’s state is down.
C. When tracking state, an OK return code means that the track’s state is down; any other return code means
that the track’s state is up.
D. When tracking state, an OK or over threshold return code means that the track’s state is down; any other
return code means that the track’s state is up.
Correct Answer: A

Which type of information is displayed when a network engineer executes the show track 1 command on the
router?
A. information about tracking list 1.
B. time to next poll for track object 1.
C. information about the IP route track table.
D. tracking information statistics.
Correct Answer: A

When using SNMPv3 with NoAuthNoPriv, which string is matched for authentication?
A. username
B. password
C. community-string
D. encryption-key
Correct Answer: A

Or i’d try to make a drive for y’all to download ’em.

Hi, I accidentally got the premium pass for ROUTE and I need to take the TSHOOT exam. Can someone tell who I can contact to change the suscription?
Thanks

From the letter of the Alphabets, we have ………I…O…RST (I_O_R_S_T)

PADI: Signal sent by host to remote device
PADO: Signal sent by remote device back to host
PADR: Unicast Signal sent by host to remote device
PADS: Unicast Signal sent by remote device back to host
PADT: Signal is sent to terminate

This is a shortcut i made to understand the PPPoE Session, hope it helps :)

@PassedRoute, please send an email to Admin.

Guys,
What is answer this question? I dont understand.. this question is correct?

Correct Answer: ABCDEF ???

OSPF chooses routes in which order, regardless of route’s adminstrative distance and metric? (choose six)
A. Intra-Area (O)
B. Inter-Area (O IA)
C. External Type 1 (E1)
D. External Type 2 (E2)
Dexter ITC
E. NSSA Type 1 (N1)
F. NSSA Type 2 (N2)

Things are going good so far…thank you guys

@weirdo can you tell me please is all Questions on dexter dumps and on digital ut premium has same or not please reply ??

1 . Choose 2 methods for migrating routing protocols ( Choose two )
A. Changing AD Distance
B. Redistributing
Answer : AB
2. Choose best IP SLA deployment cycle that reduce deployment ( Choose Three)
A. Baseline Network performance,
B. Understand Quality results
C. Fine tune and simplify
D. Quality results.
F. etc…
Answer : ACD
Answers: Baseline Network performance, Understand Baseline performance, fine tune, quality results.
Read about this question here: https://www.cisco.com/en/US/technologies/tk648/tk362/tk920/technologies_white_paper0900aecd8017531d.html
3. One new question with choose correct statement about nat. You will see configuration of nat with nat pool (Dynamic Nat)
Answers: There were list config for private add. 2 similar options for this list.
Correct answer has to be with a word “inside local”.
Second correct options you will something “this list will be translated to this subnet
DO not choose it translates one-to-one
4. What Snmp v2c use for authentication?
A. HMAC-MD5
B. HMAC-SHA
C. CBC-DES
D. Community strings
Answer : D
5. What authentication type is used by SNMPv2?
A. HMAC-MD5
B. HMAC-SHA
C. CBC-DES
D. community strings
Answer : D
6. One long question something like router get IPv6 infomation from ISP. Now it have to distribute name server and other options to hosts.
Answer: Stateful DHCPv6
7. Question about Ipv6 eigrp features supported (choose 2)
A. Scaling
B. Partial updates
C. etc..
D. etc..
Answer : AB
8. Which security level is supported throughout all SNMP versions?
A. AuthPriv
B. AuthNoPriv
C. noAuthNoPriv
D. AuthNoPriv
Answer : C
9. Question about PPPOE features (Choose two).
Options are PADO, PADI, PADR etc
Answers: PADR(PPPoE Active Discovery Request)
PADI (PPPoE Active Discovery Initiation)
ABOUT THE PPPoE:
Expanding off potential new question where people are talking about [PADO/PADI] — this refers to PPPoE:
PPPoE requires certain signals and information to establish, accept, control and terminate the session. The basic signalling is shown below.
A PADI (PPPoE Active Discovery Initiation) broadcast signal is sent by the host to the remote devices.
A PADO (PPPoE Active Discovery Offer) signal is sent by the remote device back to the host.
A PADR (PPPoE Active Discovery Request) unicast signal is sent by the host to the remote device.
A PADS (PPPoE Active Discovery Session-Confirmation) is sent by the remote device back to the host.
A PADT (PPPoE Active Discovery Terminate) signal is sent to terminate a PPPoE session. It is the proper way to terminate a session but is not the actual cause for the

termination. The cause may be a simple timeout, a manual request by either end, or an out of spec line condition.
10. Using new backup router in spite of faulty one in OSPF domain but relationship with neighbor in one interface only not working, what is the reason of this problem? (Choose two)
A. Area ID mismatch
B. Authentication mismatch
C. process id of OSPF not match
D. OSPF timers not match
E. MTU mismatch
Answer : DE
11. Regarding a diagram with 3 routers (H1(with IPv6 IP and Loopback 1.1.1.1) +R1 (with IP IPv6 and Loopback 2.2.2.2) +R2 (with IP IPv6 and Loopback 3.3.3.3)
running with EIGRP 100 on both routers and what command you will implement so that you will see the loopback IP of R2 to be advertised at H1
A. H1(config t)#router eigrp 100
H1(config t)#no stub only
B. R2(config t)#router eigrp 100
R2(config t)#no stub receive only
C. H1(config t)#ipv6 router eigrp 100
H1(config t)#no stub only
D. R2(config t)#ipv6 router eigrp 100
R2(config t)#no stub only
Answer :
12. What will be shown when you do the “show track 1”?
A. Information statistics
B. Information of track list 1
C. Information of track list object 1
D. information about the IP route track table
Answer : B
13. Which type of information is displayed when a network engineer executes the show track 1 command on the router?
A. Tracking information statistics.
B. Information about tracking list 1.
C. Information about track list object 1
D. (I forgot)
Answer : B
14. Configuration snippet that looks similar to this:
ip access-list 1 permit xx xx
ip nat inside source list 1 int fa0/0 overload
What is this an example of?
A. static NAT
B. something about the ACL
C. PAT
D. dynamic NAT
Answer: C
15. Refer to the exhibit. How can you configure a second export destination for IP address 192.168.10.1?
A. Specify a different TCP port
B. Specify a different UDP port
C. Specify a VRF
D. Configure a version 5 flow-export to the same destination
E. Specify a different flow ID
Answer: C
16. In which scenario can asymmetric routing occur?
A. active/active firewall setup
B. single path in and out of the network.
C. active/standby firewall setup
D. redundant routers running VRRP
Answer: D , Dexter’s dump is A
17. What from the following can cause an issue for URPF? (this could be single answer or multiple choice)OR Reasons why urpf may fail:
A. Assymetric routing
B. Cef not enabled
C. Urpf not applied to the traffic source
D. If it is used as ingress filtering
Answer: A
18. What does radius server combine ?(choose two)
A. Telnet
B. Authentication
C. Accounting
D. Authorization
E. SSH
Answare: BD
19. Which two statements about NHRP in a DMVPN environment are true? (Choose two)
A. It requires each endpoint to have a unique network ID
B. It routes traffic through the tunnel
C. It can identify PIM-SM RPs over a tunnel
D. It can authenticate VPN endpoints
E. It provides address resolution to route traffic
Answer: D and E
20. A network engineer configures two connected routers to run OSPF in Area 0; however, the routers fail to establish adjacency. Which option is one of the caused for this issue?
A. Area numbers match.
B. OSPF process numbers do not match on both neighbor routers.
C. The Same MTU sizes are configured on both sides.
D. The Same OSPF router IDs are configured on both routers.
Correct Answer: D
21. IP CEF load-sharing options
A. Tunnel
B. Universal
C. Include-ports
D. Source
E. Destination
Answer: ABC
22. Question with network toplogy, it is OSPF network and the router is redistributing RIP. Question is how to summarize those routes.
Answer: You do summarization on ASBR so the answer is #summary-address

23. A topology with eigrp, a Hub and two spokes, where the loopback of the spokes are not seeing each others.
Answer: Disable split horizon on the hub
24. Two limitations when use NPTv6 for IPV6 to IPV6 Address translation?
A. stateful address translation
B. a limit of 32 1-to-1 translations
C. lack of overloading functionality
D. identify all interfaceas NAT inside or outside
E. 1-to-1 prefix rewrite
F. mismatched prefix allocations
Answer: C F
25. A packet capture log indicates that several router solicitation messages were sent from a local host on the IPv6 segment. What is the expected acknowledgment and its usage?
A. Router acknowlegment messages will be forwarded upstream, where the DHCP server will allocate addresses to the local host
B. Router on the IPv6 segmenet will respond with an advertisment that provides an external path from the local subnet, as well as certain data, such as prefix discovery
C. Duplicate Address Detection wil determine if ant other local host is using the same IPv6 ddress for communication with the IPv6 routers on the segment
D. All local host traffic will be redirected to the router with the lowest ICMPv6 signature, which is staticaly defined by the network administrator.
Answer: B
26. Features of Netflow version 9?
A. Cisco proprietary
B. IEEE standard
C. IETF
Answer: C
27. Features of Netflow version 9? (Choose 2)
A. IEEE standard
B. IETF standard
D. Ingress only
E. Egress only
F. Ingress/egress
Answer : BF
28. Using new backup router in spite of faulty one in OSPF domain but relationship with neighbor in one interface only not working, what is the reason of this problem? (Choose two)
A. Area match ===> they revised it from Dexter dumps (area id mismatch)
B. Authentication match ==== they revised it from Dexter dumps (authentication mismatch)
C. Process id of OSPF not match
D. OSPF timers not match
E. MTU mismatch
Answer : DE
29 . Which two commands do you need to implement on the CALLING router to support the pppoe client ? (choose Two)
A. Peer default ip address pool
B. MTU
C. bba-group pppoe
D. pppoe enable group
E. pppoe-client dialer-pool-number
Answer: B and E
Cisco is revising the questions so that many will confuse. Please see dexter dumps question related to this example.

QUESTION 82 : Using new backup router in spite of faulty one in OSPF domain but relationship with neighbor in one interface only not working , what is the reason of this problem? (Choose 2)
Dexter ITC
A. area Id mismatch
B. authentication mismatch
C. process id of ospf not match
D. ospf timers not match
Correct Answer: AD
New Exam Questions
Using new backup router in spite of faulty one in OSPF domain but relationship with neighbor in one interface only not working, what is the reason of this problem? (Choose two)
A. area match ===> they revised it from Dexter dumps (area id mismatch)
B. authentication match ====> they revised it from Dexter dumps (authentication mismatch)
C. process id of OSPF not match
D. OSPF timers not match
E. MTU mismatch
Correct answer is DE
30. Question with network toplogy, it is OSPF network and the router is redistributing RIP. Question is how to summarize those routes.
Answer: Summary-address
31. What is true about peer groups? (Choose two)
A. Optimize backdoor routes
B. If you change configuration then it effects all peers in the group
C. Peer groups can send soft updates to all
D. Updates can be sent with multicast
Answer : C and D
32. Which two statements about password-protecting device access are true? (Choose two)
A. The more system:running-config command displays encrypted passwords in clear text
B. The service password-encryption command forces a remote device to encrypt the password
C. A network administrator can recover an encrypted password
D. The privilege level command controls the commands a specific user can execute
E. The password can be encrypted in the running configuration
Answer : D and E
33. What does the command show ip netflow display ?
A. Netflow on the router
B. Not sure of other options
Answer : A
34. Which encapsulation supports an interface that is configured for an EVN trunk?
A. 802.1Q
B. ISL
C. PPP
D. Frame Relay
E. MPLS
F. HDLC
Answer: A
35. Which three TCP enhancements can be used with TCP selective acknowledgments? (Choose three)
A. Header compression
B. Explicit congestion notification
C. Keepalive
D. Time stamps
E. TCP path discovery
F. MTU window
Answer: BCD
36. Which three problems result from application mixing of UDP and TCP streams within a network with no QoS? (Choose three.)
A. starvation
B. jitter
C. latency
D. windowing
E. lower throughput
Answer: ACE
37. Which option is invalid when configuring Unicast Reverse Path Forwarding?
A. allow self ping to router
B. allow default route
C. allow based on ACL match
D. source reachable via both
Answer: D
38. In a point-to-multipoint Frame Relay topology, which two methods ensure that all routing updates are received by all EIGRP routers within the Frame Relay network? (Choose Two)
A. Use statically defined EIGRP neighbors on the hub site.
B. Create separate address families.
C. Disable split horizon.
D. Use subinterfaces.
E. Disable EIGRP auto summary.
Answer : CD
39. A network engineer recently deployed Easy Virtual Networking in the enterprise network. Which feature improves shared services support?

A. Route replication
B. Rdge interfacing
C. Tunnel feedback.
D. Route distinguishers
Answer: A
40. If you run the command auto-cost reference-bandwidth 10000 one one of the router in the network, what will happen ?
Choose one option:
A. It will make 10Gbps on all of them
B. It will make 1 Gbps on all of them
C. dont remember
Answer : A

******Weirdo*****
Question 11
Choose best IP SLA deployment cycle that reduce deployment.
Answers: Baseline Network performance, Understand Baseline performance, fine tune, quality results.
read about this question here: https://www.cisco.com/en/US/technologies/tk648/tk362/tk920/technologies_white_paper0900aecd8017531d.html
———————————————
Question 12
One new question with choose correct statement about nat. You will see configuration of nat with nat pool (Dynamic Nat)
Answers: There were list config for private add. 2 similar options for this list. Correct answer 1) has to be with a word “inside local”. Second correct option you will something “this list will be translated to this subnet
(which is pool)”. DO not choose it translates one-to-one
———————————————
Question 13
What Snmp v2c use for authentication
Answer: com string
A. com string
B. Local String
C. One String
D. Comunication String
———————————————
Weirdo
Question 14
One long question something like, how do routers distribute prefixes obtained from ISPs using DHCPv6.
Answer: i didnt see any option like “Stateful Natv6”. If this option is not availabe, please choose “Stateful DHCPv6”
A. PPPv6
B. DHCP
C. Stateful Natv6
D. NPTv6
E. IPv4
———————————————
Question 15
One question about ipv6 eigrp features supported (choose 2)
Answer: Scaling and Partial Updates
A. Partial Updates
B. Complete Updates
C. Windows Update
D. Scaling and Partial Updates
———————————————
Question 16
Which authentication is present in all versions of SNMP
Answer: NoAuthNoPriv
A. NoAuthNoPriv
B. PrivAuthNo
C. NoAuthNoAcc
D. NoAuthNoEgress
———————————————
Question 17
Features of Netflow version 9 (Choose 2):
Answer: IETF standard and one option with “Ingress and Egress”
Weirdo
A. Standard IETF
B. Egress interface
C. IETF standard and one option with “Ingress and Egress”
D. Loopbacks
———————————————
Question 18
Question about PPPOE features (Choose two). Options are PADO, PADI, PADR etc
Answers: (PPPoE Active Discovery Request), PADI (PPPoE Active Discovery Initiation)
A. (PPPoE Active Discovery Request), PADI (PPPoE Active Discovery Initiation)
B. (PPPoR Active Discovery Request), PARP (PPPoE Active Discovery Initiation)
C. (PPPoE Active Discovery Reaching), PADI (PPPoE Active Discovery Initiating)
D. (PPP Active Discovery Request), PADI (PPP Active Discovery Initiation)
———————————————
Question 19***Check carefully
A question with illustration, having one hub two spokes, running EIGRP and loopbacks on all routers. Hub is able to see loopbacks of all the two spokes. Question asked why the spokes are not seeing each other’s loopbacks.
Answer: I chose answer that had something to do with, one of the spokes is configured with “eigrp stub receive only” [make sure the statement has the Router eigrp 100 statement followed by no stub…. or no split-horizon, depending on what choices you have]
a. H1(config t)router eigrp 100
H1(config t)no stub only
b. R2(config t)router eigrp 100
R2(config t)no stub receive only
c. H1(config t)ipv6 router eigrp 100
H1(config t)no stub only
d. R2(config t)ipv6 router eigrp 100
R2(config t)no stub only
Answer: D
———————————————
Weirdo
Question 20
Choose 2 methods for migrating routing protocols
Answers: Changing AD distance and Redistributing
A. Changing Metric and time
B. Changing Feasible Distance
C. Changing routing protocol
D. Changing distance and redistributing

*****************
*******SKYR******
*****************
1- Which statement about local policy routing is true?
A. It is used to policy route packets that are generated by the device.
B. It requires all packets to be packet switched.
C. It is used to policy route packets that pass through the device.
D. It requires all packets to be CEF switched.
E. It supports IPv4 packets only.
F. It requires an ip address or access list as the matching criteria.
Correct Answer: A

2- How route tags can be set? (Choose two)
A. only with route-maps
B. only with taglists
C. can be set with route-maps
D. can be set with taglist.
E. only used on link state RPs.
Correct Answer: CD

3- Which type of message does a device configured with the eigrp stub command send in response to EIGRP
queries?
A. invalid request
B. unavailable
C. stuck in active
D. stub-only
E. reject
F. inaccessible
Correct Answer: F

4- Which two statements about route targets that are configured with VRF-Lite are true? (Choose two)
A. Route targets uniquely identify the customer routing table
B. Route targets control the import and export of routes into a customer routing table
C. Route targets are supported only when BGP is configured
D. When IS-IS is configured, route targets identify the circuit level in which the customer resides
E. When BGP is configured, route targets are transmitted as BGP standard communities
F. Route targets allos customers to be assigned overlapping adresses
Correct Answer: BC

5- Refer to Exhibit. R1 is unable to ping interface S0/0 of R2.
What is the issue the configuration that is shown here?
A. The route-target configuration command is missing.
B. The interface IP addresses are not in the same subnet.
C. the syntax of the ping command is wrong.
D. The default route configuration is missing.
E. The serial interfaces belong to the global table instead of vrf Yellow.
Correct Answer: E

6- Which TCP port for BGP?
A. port 161
B. port 123
C. port 179
D. port 47
Correct Answer: C

7- OSPF chooses routes in which order, regardless of route’s adminstrative distance and metric? (choose six)
A. Intra-Area (O)
B. Inter-Area (O IA)
C. External Type 1 (E1)
D. External Type 2 (E2)
Dexter ITC
E. NSSA Type 1 (N1)
F. NSSA Type 2 (N2)
Correct Answer: ABCDEF

8- Which two statement about GRE tunnel interface are true? (Choose two)
A. A tunnel can be established when a source the source interface is in the up/down state
B. A tunnel Destination must be Routable, but it can be unreachable
C. To establish a tunnel the source interface must be a loopback
D. To Establish a tunnel the source interface must be up/up state
E. A tunnel destination must be a physical interface that is on up/up state
Correct Answer: BD

9- A network engineer recently deployed Easy Virtual Networking in the enterprise network.
Which feature improves shared services support?
A. route replication
B. edge interfacing
C. tunnel feedback.
D. route distinguishers
Correct Answer: A

10- Which two protocols can be affected by MPP? (Choose two)
A. POP
B. SMTP
C. HTTP
D. SFTP
E. SSH
Correct Answer: CE

11- Which command sequence can you enter a router to configure Unicast Reverse Path Forwarding in loose mode?
A. interface GigabitEthernet0/0
ip verify unicast source reachable-via loose.
B. interface GigabitEthernet0/0
ip verify unicast source reachable-via all.
C. interface GigabitEthernet0/0
ip verify unicast source reachable-via any.
D. interface GigabitEthernet0/0
ip verify unicast source reachable-via rx.
Correct Answer: C

12- If you configure one router in your network with the auto-cost reference bandwidth 100 command, which effect
on the data path is true?
A. The data path remains the same for all links.
B. The data path changes for 10 Mbps links only.
C. The data path changes for all links.
D. The data path changes for 10 Gbps links only.
Correct Answer: A

13- Which option to the command service timestamps debug enables the logging server to capture the greatest amount of information from the router?
A. uptime
B. show-timezone
C. year
D. msec
Correct Answer: D

14- A network engineer executes the show ip sla statistics command.
What does the output of this command show?
A. Operation availability
B. device CPU utilization
C. interface packet statistics.
D. packet sequencing
Correct Answer: A

15- Two aspects of an IP SLA operation can be tracked: state and reachability. Which statement about state
tracking is true?
A. When tracking state, an OK return code means that the track’s state is up; any other return code means
that the track’s state is down.
B. When tracking state, an OK or over threshold return code means that the track’s state is up; any other
return code means that the track’s state is down.
C. When tracking state, an OK return code means that the track’s state is down; any other return code means
that the track’s state is up.
D. When tracking state, an OK or over threshold return code means that the track’s state is down; any other
return code means that the track’s state is up.
Correct Answer: A

16- Which type of information is displayed when a network engineer executes the show track 1 command on the
router?
A. information about tracking list 1.
B. time to next poll for track object 1.
C. information about the IP route track table.
D. tracking information statistics.
Correct Answer: A

17- When using SNMPv3 with NoAuthNoPriv, which string is matched for authentication?
A. username
B. password
C. community-string
D. encryption-key
Correct Answer: A

someone share the new DnDs answers thank you buddy:
****DnD****
Here are some DND answers:

LMI
Address registration – allows neighbouring cisco devices to exchange the management ip addresses
Global addressing – Enables Frame Relay to identify interfaces in same manner as LAN
Multicasting – provides most efficient transmission of routing protocol messages and support address resolution
simple flow control – supports devices that are unable to use congestion notification
Virtual circuit – Prevents data from being transmitted in Black Hole

IPv6 Security
IPv6 traffic Filtering
It filters traffic at the interface level
It supports tagged ACLS
IPv6 Access Classes
It controls traffic to and from the router
It requires the destination address of the inbound traffic to be a local address.
It filters management traffic

Router
Passes logon information to the TACAS+ server
Prompts the user for username and password
TACACS+ Server
Authenticates the user
Authorises the user
User
Attempts to access the router
Provides access credentials

Frame Relay components

+ SVC: A circuit that provides temporary on-demand connections between DTEs
+ LMI: A signaling mechanism for Frame Relay devices
+ DLCI: A locally significant ID
+ FECN: An indicator of congestion on the network
+ PVC: A logical connection comprising two endpoints and a CIR

is questions Quiz on premium digitalut correct? Because dexter have different answers? Can anyone confirm? @digitaltut

What is the command to enable IPv6 access list?
A. ipv6 traffic-filter access-list-name {in | out}
B. ipv6 access-list [access-list-name]
C. access-list ipv6 [access-list-name]
D. ipv6 access-group [access-list-name] {in | out}

which one is correct

guys please help me for above questions

Passed CCNP Route with 9XX score. Thanks to Dexter very much. Thanks to all who updates the new questions and answers here. Really this helps me to answer all questions.

53 Q , 5 DND 3 LAB . (PBR, Eigrp Stub and Redistribution).

Prepare DEXTER dumps fully – Understand the topic and prepare.

In Sim lab- copy running-config startup-config is not working.

@ali, answers is A.

@Kavin congratulations mate, wondering if you recall the DnDs please?

@Ali Answer is A

@kavin did you use premium digital ut ?

hi guys just passed the exam yesterday with 949/1000…..thanks to everyone who posted the new questions(EO SNIPER etc) that really helped cuz right now they have been asking these new questions and cisco has twisted many existing questions so please be careful. I was stressed and can barely remember questions but i would say dexter and digitaltut questions are still valid atleast 30 out of 53 but slightly twisted and the new ones have already been posted above.

1) How route tags can be set? (Choose two)\\\\\this question was really twisted
A. ONLY within route tags
B. within taglists
C. can be set with ONLY route-maps
D. can be set DIRECTLY within route maps.
E. only used on link state RPs.
I DON’T KNOW THE CORRECT ANSWER. Please research well for this question because they were twisting answers like only within taglist or only within route maps or simply within route maps/taglist

\\\\\as werewolf has mentioned asymmetric routing is definitely the right answer cuz i got NO FIB OR CEF OPTION
2)What from the following can cause an issue for URPF? (this could be single answer or multiple choice)
OR
Reasons why urpf may fail:\\\i got these options
A.Assymetric routing
B.something about STP
C.something about spanning tree
D.dont rememeber this option

\\\\\this one was also twisted it was asking about GRE not framerelay
3)WHICH value does GRE tunnel use to identify the end points or destination(something like that)
A. IP ADDRESS
B. MAC ADDRESS
C. DLCI
D. dont rememeber this one
I was gonna go for DLCI but then i noticed it was asking about GRE tunnel not framerelay or even….so i chose ip address, dont know if this is right….

and yeah guys i only got three labs pbr, redistribution and eigrp stub and summary
but i got so stressed as 1st question only was redistribution and i spent half an hour on this despite practicing so many times at home(please practice about noting down the values well after show interface command and yeah i was clicking on the router to open terminal(had to click on the console pc connected to it, bloody they dont even label the console pc so i wasted my half an hour clicking on the router directly…haha…but still finished my exam 50 minutes earlier.

i will post any new twisted question as i remember…good luck guys dexter and digitaltut and the questions guys posted above saved me…

@1down thank you so much for your wonderful feedback. Thank you :) I will be practising the labs for sure.

@SMX for God Sake haan please…@digital tut trace their IP and block them please.

This is not a new DnD you can find it under question No 5 in Drag and Drop 2 https://www.digitaltut.com/drag-and-drop-2-2/comment-page-1#comment-1906202

Router
Passes logon information to the TACAS+ server
Prompts the user for username and password
TACACS+ Server
Authenticates the user
Authorises the user
User
Attempts to access the router
Provides access credentials

Anyone can help me answer the question below ?

24. Two limitations when use NPTv6 for IPV6 to IPV6 Address translation?
A. stateful address translation
B. a limit of 32 1-to-1 translations
C. lack of overloading functionality
D. identify all interfaceas NAT inside or outside
E. 1-to-1 prefix rewrite
F. mismatched prefix allocations

25. What is true about peer groups? (Choose two)
A. Optimize backdoor routes
B. If you change configuration then it effects all peers in the group
C. Peer groups can send soft updates to all
D. Updates can be sent with multicast

26. Which two statements about NHRP in a DMVPN environment are true? (Choose two)
A. It requires each endpoint to have a unique network ID
B. It routes traffic through the tunnel
C. It can identify PIM-SM RPs over a tunnel
D. It can authenticate VPN endpoints
E. It provides address resolution to route traffic

Thanks all

Q24 CF, Q25 BC, Q26 DE

@Werewolf thanks for help
I’m confused so what to prepare about drag and drop? please make me clearly about it.
Thanks!

Please need help with the DnDs, Dexter dumps…the DnDs are not clear please if anyone can help. I have only DnDs left in preparation for exam. I have exam in a week time. Thank you in advance.

I have read the DnDs provided by digitaltut, @werewolf would you be able to help us.

Digitaltut only got 19 of them…or @digitaltut are you guys going to update the Drag and Drop 2 with the missing questions…??? I stressing on it need sincere help please.

Just passed 9xx.
53q
————-
LAB:
PBR > be aware that generating traffic from the user can be done only one times (I heard from colleague of mine there might be a bug where someone generates traffic in the middle of configuration and it doesn’t allow him to generate it again once config finsihed => means failed LAB) ..maybe its just a rumor, but better not isk it right

EIGRP stub > I had to reenter “eigrp stub” after final ping test as “sh ip route” had 1subnet only. Once reentered “eigrp stub” the shy ip route came with “2subnets”

REDISTRIBUTING > I had the one with etherenet interconnection R2&R3 therefore you need to R2″distance eigrp 90 105″

Check IP addresses, OSPF prcess IDs etc, before engage the config, show run is working.
————-
DND:
Address registration – allows neighboring cisco devices to exchange the management ip addresses
Global addressing – Enables Frame Relay to identify interfaces in same manner as LAN
Multicasting – provides most efficient transmission of routing protocol messages and support address resolution ?
simple flow control – supports devices that are unable to use congestion notification
Virtual circuit – Prevents data from being transmitted in Black Hole
+
prompts the user for a username and password – Router
passes logon information to the TACAS+ server – Router
authenticates the user – TACAS+ Server
authorizes the user – TACAS+ Server
provides access credentials – User
attempts to access the router — User
+
DMVPN (HUB , Spoke mGRE and NHRP) ..this one is easy, no worries
+
mGRE: Protocol to connect multiple destinations
IPSec: Protocol used to secure connection
Keepalive: Used to keep other side if tunnel interface up with local side is up
Tunnel Key: Used to authenticate connection
MSS: Amount of data that a device can handle as unfragmented piece
+
SVC: A circuit that provides temporary on-demand connections between DTEs
LMI: A signaling mechanism for Frame Relay devices
DLCI: A locally significant ID
FECN: An indicator of congestion on the network
PVC: A logical connection comprising two endpoints and a CIR
————-
I had the same questions as “Skr” stated on the page 86.
Check out pages 83+ to get new questions (so far 10-12 Q maybe)

+ quite lot of “choose two/three” Especially IP SLA Q. Most from Dexter’s
————-
Good luck everyone and keep sharing your experiences.

@Jar thank you so much mate for your feedback. All the best for your next exams.

@Jar
Could you share what was the DMVPN (HUB , Spoke mGRE and NHRP) DnD please.