Share your ROUTE v2.0 Experience

Can someone tell me where i can get Dexter Dumps from? Please help me.

Hi guys, i thought this will help.

For OSPF Evaluation, use:

Question1: show ip ospf database
Question 2: show ip ospf interface serial 1/0
Question 3: show ip ospf
Question 4: show ip route

For EIGRP Evaluation, use:

1: R6: show ip interface brief
R1: show ip route 150.1.6.6
2: show running-config
3: show running-config
4: show ip eigrp topology
5: show running-config

@weirdo

Yesterday you wrote that has passed the exam.. and now you wrote these things about ospf and eigrp eval that there arent anymore on the exam?

@Mostafa
look at the posts above
there was the one with the link for Dexter Dumps

@Maja, thank you so much for fast response! I had my exam In next couple of minutes after your response! Helped me a lot. Thanks guys (@Eo,Sniper, weirdo…) for last 2 days and for gathering and sharing new info and questions.

@digitaltut team, thank you so much for final touch of my preparation. I studied from CBT and INE, created labs and tested different scenarios, but in the end went through Dexter dumps and digitaltut premium.

Thank you all and have a good weekend :)

Passed Today with 9xx
Most of the questions are from the Dump
all the new questioned are from EO comments
New DND LMI and DMVPN ( HUB , Spoke mGRE and NHRP )
LABs EIGRP Stub and Redistribute and PBR

Passed with 790, the Grace of God indeed,

53 Questions (90% of the questions were new to me), guessed through most of them.

OSPF/EIGRP redistribution
PBR
EIGRP Stub, many dumps say this is a rare one but it was there
All the sims are exactly as there are on this site, including IP addresses

can anyone share me the latest dump please?

For the question: “One long question something like, how do routers distribute prefixes obtained from ISPs using DHCPv6.”
this Cisco-article could be useful – https://www.cisco.com/c/en/us/support/docs/ip/ip-version-6-ipv6/113141-DHCPv6-00.html

The process named “Prefix Delegation Feature” and it doesn’t use stateful DHCPv6. Routers use “R(config-if)# ipv6 address autoconfig default” command on provider’s side and “R(config-if)# ipv6 address prefix-from-provider” command on client’s side. And clients use “Client(config-if)# ipv6 address autoconfig”
So this is NOT stateful DHCPv6 process!

Did you give the exam Werewolf .?

whats the answer to : For the question: “One long question something like, how do routers distribute prefixes obtained from ISPs using DHCPv6.”

DnD which ones to study?? @Maja or anyone who gave exam can help.?

1)LMI extension
2)Router, TACACS SERVR,USER
3)Frame Relay Components
4)DMVPN

which is the 5th one.. also confirm the first 4 if right ones

@Weirdo
Thanks for your help

@brook
5) IP SLA cycle deployment

But learn all DnD from digitaltut and Dexter and you’ll be fine

Hi Maja.. thanks for the reply

But you got only these below 5 DnD’s only right

1)LMI extension
2)Router, TACACS SERVR,USER
3)Frame Relay Components
4)DMVPN
5)IP SLA cycle deployment

Does anyone know Spoto? Are they good or bad? Maybe give a number from 1 to 10 with 10 being perfect. Thanks

Hi nuni… did you get any simlutaions apart from the three labs

PBR, EIGRP Stub Sim , EIGRP OSPF Redistribute

Hi @maja and kevin Geek… did you get any simlutaions apart from the three labs

PBR, EIGRP Stub Sim , EIGRP OSPF Redistribute

@ronaldo I’ll have my exam soon. Will try to remember new questions and answers with details.

thanks @werewolf

Passed yesterday, all i used was digitaltut, page 83 (20 q’s from sniper,eo etc), from this forum and read dexters dump once the night before. That is enough to pass however you should the material well so you can logically answer the questions correctly.

Good Luck to you all

@Junipah

could you tell me if there was any evaluation sim apart from labs ?

also, did you get only these below 5 DnD’s

1)LMI extension
2)Router, TACACS SERVR,USER
3)Frame Relay Components
4)DMVPN
5)IP SLA cycle deployment

Guys,
Passed the exam yesterday 9xx/1000!
53 questions, This is the latest version of the exam
3 questions for LAB (PBR, OSPF/EIGRP redistribution and EIGRP ip summary-address)
5 questions of Dnd
45 questions (Multiple Choices)
no Show IP EIGRP and Show IP OSPF sh run questions!
Dexter Dumps still valid and you need to understand the principles of the questions since I think 30/45 are still on Dexter Dumps questions (Cisco just rephrased the questions but still the answer are the same and the choices are very tricky so if you memorize the answer or the position of the choices then its very hard.
The 15 questions are not in Dexter Dumps but thanks to (@Eo,Sniper, weirdo) for their latest update for the questions.
New Questions I remembered,
1. Regarding a diagram with 3 routers (H1(with IPv6 IP and Loopback 1.1.1.1) +R1 (with IP IPv6 and Loopback 2.2.2.2) +R2 (with IP IPv6 and Loopback 3.3.3.3)
running with EIGRP 100 on both routers and what command you will implement so that you will see the loopback IP of R2 to be advertised at H1
a. H1(config t)router eigrp 100
H1(config t)no stub only
b. R2(config t)router eigrp 100
R2(config t)no stub receive only
c H1(config t)ipv6 router eigrp 100
H1(config t)no stub only
d R2(config t)ipv6 router eigrp 100
R2(config t)no stub only

2. what will be shown when you do the “show track 1”
a information statistics
b information of track list 1
c information of track list object 1

Updated:

1) Choose 2 methods for migrating routing protocols
Answers: Changing AD distance and Redistributing

2) QUESTION about Choose best IP SLA deployment cycle that reduce deployment.
Answer: Baseline Network Performance, Undertanding Network Performance Baseline, Quantify Results, Fine Tune and Optimize.

3)One new question with choose correct statement about nat. You will see configuration of nat with nat pool (Dynamic Nat)
Answers: There were list config for private add. 2 similar options for this list. Correct answer has to be with a word “inside local”. Second correct options you will
Something “this list will be translated to this subnet (which is pool)”. DO not choose it translates one-to-one

4) What Snmp v2c use for authentication
Answer: community string

5) One long question about router get ipv6 infos from ISP. Now it have to distribute name server and other options to hosts (LAN).
Choices

6) one new DND about DMVPN, meaning of HUB, SPOKE, mGRE, NHRP.

7) One DND Frame relay LMI extensions.

8) one question about ipv6 eigrp features supported (choose 2)
Answer: scaling and partial updates.

9) QUESTION about PADO, PADI, PADR Answers: PADR(PPPoE Active Discovery Request) and PADI (PPPoE Active Discovery Initiation)

LABs: EIGRP Stub, OSPF and EIGRP redistribution, PBR all labs from DigitalTut.

10) New question about SNMP
Which security level is supported throughout all snmp versions?
-authPriv
-authNoPriv
-noAuthNoPriv
Answer: noAuthNoPriv

11) Netflow v9 – Answer is IETF + ingress/egress
-IEEE standard
-IETF standard
-ingress only
-egress only
-ingress/egress

ABOUT THE PPPoE:
Expanding off potential new question where people are talking about [PADO/PADI] — this refers to PPPoE:

PPPoE requires certain signals and information to establish, accept, control and terminate the session. The basic signalling is shown below.

A PADI (PPPoE Active Discovery Initiation) broadcast signal is sent by the host to the remote devices.
A PADO (PPPoE Active Discovery Offer) signal is sent by the remote device back to the host.
A PADR (PPPoE Active Discovery Request) unicast signal is sent by the host to the remote device.
A PADS (PPPoE Active Discovery Session-Confirmation) is sent by the remote device back to the host.
A PADT (PPPoE Active Discovery Terminate) signal is sent to terminate a PPPoE session. It is the proper way to terminate a session but is not the actual cause for the

termination. The cause may be a simple timeout, a manual request by either end, or an out of spec line condition.

And take careful with the question about the OSPF, the exam asks only two answers:

Question:
Using new backup router in spite of faulty one in OSPF domain but relationship with neighbor in one interface only not working, what is the reason of this problem? (Choose two)
A. area match ===> they revised it from Dexter dumps (area id mismatch)
B. authentication match ==== they revised it from Dexter dumps (authentication mismatch)
C. process id of OSPF not match ====> my answer
D. OSPF timers not match
E. MTU mismatch ====> my answer

please share dexter file which needs to be prepared for route exams

@Baron

could you tell me if there was any evaluation sim apart from labs ?

also, did you get only these below 5 DnD’s

1)LMI extension
2)Router, TACACS SERVR,USER
3)Frame Relay Components
4)DMVPN
5)IP SLA cycle deployment

Can anyone provide us with the new DnD questions and answers as well please..There’s about 32 one in Dexter’s dumb. Any one please!!!!!!

anyone appeared for exam can you share which drag and drop is the one below :

IP SLA cycle deployment

i dont find one in the dexter dumps

Can any one please provide the questions in the dexter dumps for EIGRP and OSPF Sim.
I am just able to see the Explanation for the topolgies given.

@Maggie,
I think there are 2 versions of the exam, Last year to Jan19 2018 (48questions) cutoff which is 90% are covered from Dexter Dumps.
The Jan 22 upto now is the exam that I got (53 questions) with just 3 Lab and 5 Dnd and 45 multiple choices. No evaluation sim (no EIGRP and no OSPF sh run). 65% are still on Dexter Dumps since 35/53 questions are exact questions in Dexter Dumps. 18 questions are new. I think they are just mixing the old version and the new version and still adding new questions so that the exam will be having different versions from time to time. So I can still recommend the mastery of Dexter Dumps to the fullest for stock knowledge and just get an update for the new questions in this forum 1 day before taking the exam so that you will not be surprised for the new questions.

@Baron thanks much for the detailed info

any idea which is this drag and drop

IP SLA cycle deployment ??

please share me 53 new questions dump please

@ Baron,
Thank you for your exam experience feedback , i think that the last question has been wrongly answered , process ospf id should NOT have to be the same for building neighborship …

@Baron
Thank you for your exam experience feedback, it will be helpful for any one want to have exam in few weeks

@Platon
agree with u about this answer: but what is the right answer

@ Doleeb
I think the second choice should be OSPF timers (Hello , Dead )mismatch , as it is a mandatory parameter that should be matched for neighbor requirement .

Although please note that for EIGRP hello / hold timers shouldn’t have to be the same to form neighborship ! just FYI…

What is the correct answer for
“2. what will be shown when you do the “show track 1”
a information statistics
b information of track list 1
c information of track list object 1” ???

I have edited and updated the New questions, i will be posting them shortly

thanks very much

@Platon,
I think you are right.. Cisco is revising the questions so that many will confuse. Please see dexter dumps question related to this example.

QUESTION 82 Using new backup router in spite of faulty one in ospf domain but relationship with neighbor in one interface
Dexter ITC
only not working , what is the reason of this problem? (Choose 2)
A. area Id mismatch
B. authentication mismatch
C. process id of ospf not match
D. ospf timers not match
Correct Answer: AD

New Exam Questions
Using new backup router in spite of faulty one in OSPF domain but relationship with neighbor in one interface only not working, what is the reason of this problem? (Choose two)
A. area match ===> they revised it from Dexter dumps (area id mismatch)
B. authentication match ==== they revised it from Dexter dumps (authentication mismatch)
C. process id of OSPF not match
D. OSPF timers not match
E. MTU mismatch

Correct answer is DE

Hey guys, after posting, please look into it and make necessary corrections. I have spent hours trying to put this together.

@Werewolf
i think the answer should be C

To display information about objects that are tracked by the tracking process, use the show track command in privileged EXEC mode.
show track [ object-number [brief] | interface [brief] | ip sla [brief] | timer ]
object-number: (Optional) Object number that represents the object to be tracked. The range is from 1 to 1000.

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipapp/command/iap-cr-book/iap-s3.html#wp1928741274

Answer: b information of track list 1

QUESTION 20 A network engineer configures two connected routers to run OSPF in Area 0; however, the routers fail to establish adjacency. Which option is one of the caused for this issue?
A. Area numbers match.
B. OSPF process numbers do not match on both neighbor routers.
C. The Same MTU sizes are configured on both sides.
D. The Same OSPF router IDs are configured on both routers.
Correct Answer: D

So you really must fully understand the theory in the Dexter dumps so that you will deduct and can figure out the best answer even they revised/rephrase the question or the choices

Okay, here are the newly complied questions:
Question 1
Which two statements about NHRP in a DMVPN environment are true? (Choose two)
a. It requires each endpoint to have a unique network ID
b. It routes traffic through the tunnel
c. It can identify PIM-SM RPs over a tunnel
d. It can authenticate VPN endpoints
e. It provides address resolution to route traffic
answer: D and E
———————————————
Question 2
Which two commands do you need to implement on the CALLING router to support the pppoe client ? (choose Two)
A. peer default ip address pool
B. mtu
C. bba-group pppoe
D. pppoe enable group
E. pppoe-client dialer-pool-number
answer: B and E
———————————————
Question 3
what does radius server combine ?(choose two)
A) telnet
authentication
C) accounting
D) authorization
E) SSH
Answare:BD
———————————————–
Question 4
What from the following can cause an issue for URPF? (this could be single answer or multiple choice)
OR
Reasons why urpf may fail:
A.Assymetric routing
B.Cef not enabled
C.Urpf not applied to the traffic source
D.If it is used as ingress filtering
Answer:A
————————————————
Question 5
In which scenario can asymmetric routing occur?
A. active/active firewall setup
B. single path in and out of the network.
C. active/standby firewall setup
D. redundant routers running VRRP
Answer: D
———————————————
Question 6
Refer to the exhibit. How can you configure a second export destination for IP address 192.168.10.1?
A. Specify a different TCP port
B. Specify a different UDP port
C. Specify a VRF
D. Configure a version 5 flow-export to the same destination
E. Specify a different flow ID
Answer: C
————————————–
Question 7
Configuration snippet that looks similar to this:
ip access-list 1 permit xx xx
ip nat inside source list 1 int fa0/0 overload
What is this an example of?
A. static NAT
B. something about the ACL
C. PAT
D. dynamic NAT
Answer: C
———————————————
Question 8
Question with network toplogy, it is OSPF network and the router is redistributing RIP. Question is how to summarize those routes.
Answer: You do summarization on ASBR so the answer is #summary-address
———————————————
Question 9
A topology with eigrp, a hub and two spokes, where the loopback of the spokes are not seeing each others.
Answer: Disable split horizon on the hub
———————————————
Question 10
Choose 2 methods for migrating routing protocols
Answers: Changing AD distance and Redistributing
———————————————
Question 11
Choose best IP SLA deployment cycle that reduce deployment.
Answers: Baseline Network performance, Understand Baseline performance, fine tune, quality results.
read about this question here: https://www.cisco.com/en/US/technologies/tk648/tk362/tk920/technologies_white_paper0900aecd8017531d.html
———————————————
Question 12
One new question with choose correct statement about nat. You will see configuration of nat with nat pool (Dynamic Nat)
Answers: There were list config for private add. 2 similar options for this list. Correct answer 1) has to be with a word “inside local”. Second correct option you will something “this list will be translated to this subnet
(which is pool)”. DO not choose it translates one-to-one
———————————————
Question 13
What Snmp v2c use for authentication
Answer: com string
———————————————
Question 14
One long question something like, how do routers distribute prefixes obtained from ISPs using DHCPv6.
Answer: i didnt see any option like “Stateful Natv6”. If this option is not availabe, please choose “Stateful DHCPv6”
———————————————
Question 15
One question about ipv6 eigrp features supported (choose 2)
Answer: Scaling and Partial Updates
———————————————
Question 16
Which authentication is present in all versions of SNMP
Answer: NoAuthNoPriv
———————————————
Question 17
Features of Netflow version 9 (Choose 2):
Answer: IETF standard and one option with “Ingress and Egress”
———————————————
Question 18
Question about PPPOE features (Choose two). Options are PADO, PADI, PADR etc
Answers: (PPPoE Active Discovery Request), PADI (PPPoE Active Discovery Initiation)
———————————————
Question 19***Check carefully
A question with illustration, having one hub two spokes, running EIGRP and loopbacks on all routers. Hub is able to see loopbacks of all the two spokes. Question asked why the spokes are not seeing each other’s loopbacks.
Answer: I chose answer that had something to do with, one of the spokes is configured with “eigrp stub receive only” [make sure the statement has the Router eigrp 100 statement followed by no stub…. or no split-horizon, depending on what choices you have]
a. H1(config t)router eigrp 100
H1(config t)no stub only
b. R2(config t)router eigrp 100
R2(config t)no stub receive only
c. H1(config t)ipv6 router eigrp 100
H1(config t)no stub only
d. R2(config t)ipv6 router eigrp 100
R2(config t)no stub only
Answer: D
———————————————
Question 20
Choose 2 methods for migrating routing protocols
Answers: Changing AD distance and Redistributing
———————————————
Question 21
QUESTION about PADO, PADI, PADR
Answers: PADR(PPPoE Active Discovery Request) and PADI (PPPoE Active Discovery Initiation)
———————————————
Question 22
Using new backup router in spite of faulty one in OSPF domain but relationship with neighbor in one interface only not working, what is the reason of this problem? (Choose two)
A. area ID mismatch
B. authentication mismatch
C. process id of OSPF not match
D. OSPF timers not match
E. MTU mismatch
Answer: CE
———————————————
Question 23
What will be shown when you do the “show track 1”
a information statistics
b information of track list 1
c information of track list object 1
d. time for track 1
Answer: B
———————————————
Question 24
How can you configure a second export destination for IP address 192.168.10.1?
A. Specify a different TCP port
B. Specify a different UDP port
C. Specify a VRF
D. Configure a version 5 flow-export to the same destination
E. Specify a different flow ID
Answer: C
———————————————
Question 25
Configuration snippet that looks similar to this:
ip access-list 1 permit xx xx
ip nat inside source list 1 int fa0/0 overload
What is this an example of?
A. static NAT
B. something about the ACL
C. PAT
D. dynamic NAT
Answer: C
———————————————
Question 26
Which two statements about NHRP in a DMVPN environment are true? (Choose two)
a. It requires each endpoint to have a unique network ID
b. It routes traffic through the tunnel
c. It can identify PIM-SM RPs over a tunnel
d. It can authenticate VPN endpoints
e. It provides address resolution to route traffic
answer: D and E
———————————————
Question 27
what does radius server combine ?(choose two)
A) telnet
B) authentication
C) accounting
D) authorization
E) SSH
Answare:BD
———————————————
Question 28
What from the following can cause an issue for URPF? (this could be single answer or multiple choice)
OR
Reasons why urpf may fail:
A.Assymetric routing
B.Cef not enabled
C.Urpf not applied to the traffic source
D.If it is used as ingress filtering
Answer:A
———————————————
Question 29
In which scenario can asymmetric routing occur?
A. active/active firewall setup
B. single path in and out of the network.
C. active/standby firewall setup
D. redundant routers running VRRP
Answer: D

Question 1
Which two statements about NHRP in a DMVPN environment are true? (Choose two)
a. It requires each endpoint to have a unique network ID
b. It routes traffic through the tunnel
c. It can identify PIM-SM RPs over a tunnel
d. It can authenticate VPN endpoints
e. It provides address resolution to route traffic
answer: D and E
———————————————
Question 2
Which two commands do you need to implement on the CALLING router to support the pppoe client ? (choose Two)
A. peer default ip address pool
B. mtu
C. bba-group pppoe
D. pppoe enable group
E. pppoe-client dialer-pool-number
answer: B and E
———————————————
Question 3
what does radius server combine ?(choose two)
A) telnet
authentication
C) accounting
D) authorization
E) SSH
Answare:BD
———————————————–
Question 4
What from the following can cause an issue for URPF? (this could be single answer or multiple choice)
OR
Reasons why urpf may fail:
A.Assymetric routing
B.Cef not enabled
C.Urpf not applied to the traffic source
D.If it is used as ingress filtering
Answer:A
————————————————
Question 5
In which scenario can asymmetric routing occur?
A. active/active firewall setup
B. single path in and out of the network.
C. active/standby firewall setup
D. redundant routers running VRRP
Answer: D
———————————————
Question 6
Refer to the exhibit. How can you configure a second export destination for IP address 192.168.10.1?
A. Specify a different TCP port
B. Specify a different UDP port
C. Specify a VRF
D. Configure a version 5 flow-export to the same destination
E. Specify a different flow ID
Answer: C
————————————–
Question 7
Configuration snippet that looks similar to this:
ip access-list 1 permit xx xx
ip nat inside source list 1 int fa0/0 overload
What is this an example of?
A. static NAT
B. something about the ACL
C. PAT
D. dynamic NAT
Answer: C
———————————————
Question 8
Question with network toplogy, it is OSPF network and the router is redistributing RIP. Question is how to summarize those routes.
Answer: You do summarization on ASBR so the answer is #summary-address
———————————————
Question 9
A topology with eigrp, a hub and two spokes, where the loopback of the spokes are not seeing each others.
Answer: Disable split horizon on the hub
———————————————
Question 10
Choose 2 methods for migrating routing protocols
Answers: Changing AD distance and Redistributing

Good luck guys that will take the exam this Jan29-Feb2! :-)

I can still recommend the mastery of Dexter Dumps to the fullest for stock knowledge and just get an update for the new questions in this forum 1 day before taking the exam so that you will not be surprised for the new questions.

@Margie
I don’t have that question Dnd (IP SLA cycle deployment) in my exam.
1)LMI extension
2)Router, TACACS SERVR,USER
3)Frame Relay Components
4)DMVPN
5)IPv6 router security

@Weirdo, you are correct. WTF! I was confused I thought it is a revised question but it is still exactly in Dexter Dumps..the choices was revised and the questions was rephrased.

Dexter Dumps
QUESTION 62 Which type of information is displayed when a network engineer executes the show track 1 command on the router?
A. information about tracking list 1.
B. time to next poll for track object 1.
C. information about the IP route track table.
D. tracking information statistics.
Correct Answer: A

They just revised the choices..
A. tracking information statistics.
B. Information about tracking list 1.
C. Information about track list object 1
D. (I forgot)

Correct answer: B

@ weirdo
thank you for your output , for question 4 you should add cef is disabled that makes urpf fail, since it relies on FIB for examining all packets that are received as input on the interface where urpf is enabled to make sure that the source add and the interface appear in the routing table and match the interface on which the packet was received.

anyone clarify answers for new dnd

LMI extension
2)Router, TACACS SERVR,USER
3)Frame Relay Components
4)DMVPN
5)IP SLA cycle deployment

thanks @Baron