Share your ROUTE v2.0 Experience

HI Ch0wn,
May I ask you from which part of the world you sat for the exam. How come your questions were different than others! Just to get some idea.

Thanks,

can anyone share todays experience?

Any exam takers today? I will take the exam tomorrow, hoping someone can share their experience.

@ginger_ice17 Don’t just expect someone to help you but expect to help yourself no one can help you other than your self, Keep paying attention to LAB and D&D in this site which score a lot, I wish you can pass, Do you best!!!!!

Hi guys…I passed today with score 876. The same 3 default labs…90% questions were from this site ..good luck.

Just passed.
I got Eigrp Lab Eval, ospf, virtual links. All the questions were from MPQ

I passed last week with a 8xx on 2nd attempt
Labs: EIGRP Lab Eval, OSPF Sim, OSPF IPv6 Virtual Links. (these came on both attempts)
D&D: 2 frame relay Drag and drops, SNMP, AAA, Access List Type

Quesions were definetely from NU 5 and 6, MPQ, the last i think 5 questions I got I don’t recall seeing before. One had to do with BGP peer groups. I’m glad I knew about the topic but if you don’t it will definetely trip you up. I think main reason why I failed the first time was because I skipped the IPv6 Virtual links completely.

Hello
The new ccnp r & s is undergoing changes as to whether anyone can report it
Thanks

Passed few days ago. Only had time to review labs(yes you should know them cold, ips and Area changed, read virtual-link lab carefully, they clearly state to get maximum points, clear out the un-needed commands) and MCQ. Problems that I encountered, my strategy was to eliminate 2 answers that just looks wrong, then it’s basically 50% for questions I don’t know, versus straight guessing and accept the 25% odds there. Good luck all on the last day of testing. sending good karma to all.

Passed the exam today. Same labs (ospf sim, ospf ipv6 virtual link and eigrp eval). Thanks digitaltut!

Passed the exam 2 days ago. there is small change in ospf ipv6 virtual link but it’s not hard to answer and other lab are same.

pased today.
dumps valid
eigrp eva, ospf and virtua link labs
some new questions

I passed IP Routing exam with score 851 yesterday(23rd Feb(Last day of current exam!!!)).
Thank you digitaltut!!!
Most of questions are same as this web site.
There were some new questions and similar updated questions.
But It doesn’t make me fail.

Hello All,
Finally, I passed the exam today with 87X score. 95% questions were from MPQ, NU5, NU6 and individual topics from right side bar.
===================================================================
Labs:
1. Eigrp Eval: Same as here
2. IPv6 OSPF Virtual Link: Same as here ( found route on R1’s routing table, ping not allowed)
3. OSPF Sim(Router name: Los Angeles, ….. Process id 56, Area 30, IP: 192.168.5.5/30) applied stub and stub no summary. Ping worked from Router 1 to Router 3 loopback address.
===================================================================

DnD: 5/6
NAT64
Frame Relay
Drag drop about AAA. (wording was completely different)
Answer:
+ Auth-proxy: It returns information about hosts using proxy service + Commands: It returns information about individual EXEC commands and permissions associated with a privilege level + Connection: It returns information about outbound communications from the network access server + Exec: It returns information about user EXEC terminal sessions with the network access server + Network: It returns information about SLIP, PPP and ARA sessions + Resources: It returns information about calls that have passed and failed user authentication
===================================================================

Questions: (so far I remember)
1. Which two debug commands can you use to view issues with CHAP and PAP authentication? (Choose two)
A. debug tacacs
B. debug ppp authentication
C. debug radius
D. debug aaa authentication
E. debug ppp negotiation

2. What does the following access list, which is applied on the external interface FastEthernet 1/0 of the perimeter router, accomplish?
router(config)#access-list 101 deny ip 10.0.0.0 0.255.255.255 any log
router (config)#access-list 101 deny ip 192.168.0.0 0.0.255.255 any log
router (config)#access-list 101 deny ip 172.16.0.0 0.15.255.255 any log
router (config)#access-list 101 permit ip any any
router (config)#interface FastEthernet 1/0
router (config-if)#ip access-group 101 in
A. It prevents incoming traffic from IP address ranges 10.0.0.0 – 10.0.0.255, 172.16.0.0 – 172.31.255.255, 192.168.0.0 – 192.168.255.255 and logs any intrusion attempts.
B. It prevents the internal network from being used in spoofed denial of service attacks and logs any exit to the Internet.
C. It filters incoming traffic from private addresses in order to prevent spoofing and logs any intrusion attempts.
D. It prevents private internal addresses to be accessed directly from outside.

3. A corporate policy requires PPPoE to be enabled and to maintain a connection with the ISP, even if no interesting traffic exists. Which feature can be used to accomplish this task?
A. TCP Adjust
B. Dialer Persistent
C. PPPoE Groups
D. half-bridging
E. Peer Neighbor Route

4. Which command instruct a PPPoE client to obtain its IP address from the PPPoE server?
A. interface dialer
B. ip address negotiated
C. pppoe enable
D. ip address dhcp
E. ip address dynamic
Answer: B

5. Which two statements about Frame Relay LMI autosense are true on a router? (Choose two)
A. It requires the LMI type to be explicitly configured
B. It operates on Frame Relay DTE interfaces
C. It operates on Frame Relay DCE interfaces
D. It operates when the line is up but the line protocol is down
E. It requires the line protocol to be up

Answer: B D

6.Refer to the exhibit. After configuring GRE between two routers running OSPF that are connected to each other via a WAN link, a network engineer notices that the two routers cannot establish the GRE tunnel to begin the exchange of routing updates. What is the reason for this?

A. Either a firewall between the two routers or an ACL on the router is blocking IP protocol number 47.
B. Either a firewall between the two routers or an ACL on the router is blocking UDP 57.
C. Either a firewall between the two routers or an ACL on the router is blocking TCP 47.
D. Either a firewall between the two routers or an ACL on the router is blocking IP protocol number 57.

Answer: A

7. two statement about GRE tunnel interface are true?
A. A tunnel can be established when a source the source interface is in the up/down state
B. A tunnel destination must be routable, but it can be unreachable
C. To establish a tunnel the source interface must be a loopback
D. To establish a tunnel the source interface must be up/up state
E. A tunnel destination must be a physical interface that is on up/up state

Answer: B D

8. Which three algorithms can you configure with the ip cef load-sharing algorithm command? (Choose three)
A. per-packed
B. Tunnel
C. per-destination
D. Universal
E. Per-source
F. Include-ports

Answer: B D F
9. Which two statements about GRE tunnel keys are true? (Choose two)
A. The key ID must be the same on each device.
B. They prevent the injection of unwanted frames.
C. They prevent the injection of unwanted packets.
D. They must be stored to a keychain.
E. They provide the highest level of security that is available.

Answer: A C

10. During which DMVPN phase is spoke-to-spoke communication enabled?
A. phase 2
B. phase 4
C. phase 5
D. phase 6
E. phase 1

Answer: A

11. What is the default maximum segment size for TCP traffic?
A. 536
B. 1492
C. 1500
D. 1508
E. 3340
F. 4096

12. RIPv2 Question. Cannot receive RIP updates. Why?
A. Firewall Port block UDP 520
B. Firewall Port block TCP 520
C. Firewall Port block UDP 502
D. Firewall Port block TCP 502

Answer: ?

13. A route with default RIPv2 settings loses connectivity to it’s next-hop neighbor. How long does the router wait before removing the route to the next hop from its route table?
A. 30 seconds
B. 60 seconds
C. 180 seconds
D. 240 seconds

14. are two important differences between OSPFv2 and OSPFv3? (Choose two)
A. Only OSPFv3 provides support for IPv6.
B. Only OSPFv3 automatically chooses a router ID for the local device.
C. Only OSPFv3 supports multiple OSPF instances on a single link.
D. Only OSPFv3 automatically enables interfaces when you create them in device configuration mode.
E. Only OSPFv3 automatically detects OSPF neighbors on an NBMA interface

15. Which LSA type in OSPFv3 is used for link-local updates?
A. Link LSA type 5
B. Link LSA type 8
C. Link LSA type 6
D. Link LSA type 4

Answer: B

16. Which two packet type can an EIGRP router send when a route goes into the Active state? (Choose two)
A. reply
B. request
C. hello
D. update
E. query

Answer: A E

17 Which two protocols ca be affected by MPP? (Choose two)
a. OSPF
b. FTP
c. HTTP
d. BGP
e. VTP

18. DHCPv6 can obtain configuration parameters from a server through rapid two-way message exchange. Which two steps are involved in this process? (Choose two)
A. solicit
B. advertise
C. request
D. auth
E. reply

Answer: A E

19. Which three items can you track when you use two time stamps with IP SLAs? (Choose three)
A. delay
B. jitter
C. packet loss
D. load
E. throughput
F. path

Answer: A B C

20. Which two protocols are required for DMVPN? (Choose two)
A. IPSec
B. PPTP
C. mGRE
D. NHRP
E. Open VPN

Answer: C D

21. Which option prevents routing updates from being sent to the DHCP router, while still allowing routing update messages to flow to the Internet router and the distribution switches?
>> Options were different than the website.

22. Which command enables NAT-PT on an IPv6 interface?
A. ipv6 nat
B. ipv6 nat enable
C. ipv6 nat-pt
D. ipv6 nat-pt enable

Answer: A

Thank you all for sharing your experiences and help others to achieve their success.

All the best.

BM

Failed today 740. now will try to study new exam. :(

i paid lot of attention to labs and did all labs correctly but i think i messed up in question and Drag and drop

Does anyone know yet what the format will be for the new version of the exam and when it comes in?

Does anyone know a website that is the same as this for the new ENCOR exam?

I passed my CCNP ROUTE. I just wanted to say 9 tut is the best website for learning Cisco material, not just for the questions but for the examples and labs as well, they have the best cisco stuff I’ve even seen and a great way for teaching and explaining everything. Thanks a lot. Only question is, do you get a certificate for CCNP route?

I’ve been using this service for a while now, and I never was disappointed. Now I’m having high expectations regarding ENCOR and SPCOR. I’m available to discuss technical matters and technologies. together we can make it!

Dude you can stop trying to scam people, this certification is not active anymore. You Idiot.

Cisco exam reform has begun, and stable and effective exam answers will be introduced shortly. Learn from us soon if you need to take an exam in the near future.
Please contact my name

Hi Guys, I have a Cisco VIRL subscription available till November. Anyone interested, I can give to 60% price (120usd). please wite at zyng_06 at yahoo com

Does anyone take new ENCORE exam?

what is the new tshoot exam now? is it the ENCORE?

Hello all, I am already CCNP (R&S)certified on old version. My certification is going to be expired on 21 march. So which exam should I take to renew my ccnp certification? There are two exam Core (350-401) and Concentration exam – Advanced Routing and Switching (300-410). Please help …

Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network………..

A. security group tag ACL aassigned to each port on a switch
B. security group tag number assigned to each porwdt on a network
C. security group tag number assigned to each user on a switch
D. security group tag ACL assigned to each router on a network

Answer: B

thought the answer would be c

hello guys, does anyone have materials or dumps from the new ccnp encor 200-401 exam to share?
from already thank you.

Need help with the below question.

Which description of an SD-Access wireless network infrastructure deployment is true?
A. The access point is part of the fabric underlay
B. The WLC is part of the fabric underlay
C. The access point is part the fabric overlay
D. The wireless client is part of the fabric overlay

B or C ? thanks

If i have to renew my CCNP R&S – then do i need to appear for all 3 exams again as i gave it previously in the old format ? Thanks.

Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network………..

A. security group tag ACL aassigned to each port on a switch
B. security group tag number assigned to each porwdwdt on a network
C. security group tag number assigned to each user oqn a switch
D. security group tag ACL assigned to each router on a network

Answer: B

where can i find dumps for 810-440 DTBAA exam?

Which feature does cisco trustsec use to provide scalable, secure communication throughout a network?
a. security group tag number assigned to each user on a switch
b. security group tag ACL assigned tsfdzvo each router on a network
c. security group tag ACL assigned to each port on a switch
d. security group tag number assigned to each port on a network
Answer: ???

@Anonymous
C is the correct ans for Q3
“”
A scalable group is a group of endpoints with
similar policies. The SD-Access policy plane assigns every endpoint
(host) to a scalable group using TrustSec SGT tags. Assignment to a
scalable group can be either static per fabric edge port or using
dynamic authentication through AAA or RADIUS using Cisco ISE.
“”
from ENCOR book

pls any explanation why B is Correct ans?

A client with IP address 209.165.201.25 must access a web server on port 80 at 209.165.200.225. To allow this traffic, an engineer must add a statement to an access control list that is applied in the inbound direction on the port connecting to the web server. Which statement allows this traffic?
A. permit tcp host 209.165.200.225 eq 80 host 209.165.201.25
B. permit tcp host 209.165.201.25 host 209.165.200.225 eq 80
C. permit tcp host 209.165.200.225 eq 80 host 209.165.201.25
D. permit tcp host 209.165.200.225 host 209.165.201.25 eq 80

Answer: B

I am interested in taking the exam with 350-401, does anyone know if this exam has laboratories or are they just questions?

Refer to the exhibit.

The WLC administrator sees that the controller to which a roaming client associates has Mobility Role Anchor configured under Clients > Detail.

Which type of roaming is supported?

Is the right answer Layer 3 intercontroller or Layer 2 intercontroller? And why is that right? Thanks :)

Which method displays text directly into the active console with a synchronous
EEM applet policy?

A) event manager applet boom
event syslog pattern ‘UP’
action 1.0 syslog priority direct msg ‘logging directly to console’

B) event manager applet boom
event syslog pattern ‘UP’
action 1.0 gets ‘logging directly to console’

C)event manager applet boom
event syslog pattern ‘UP’
action 1.0 string ‘logging directly to console

D)event manager applet boom
event syslog pattern ‘UP’
action 1.0 puts ‘logging directly to console’

What is the right aswer her?

Hello,

Did the @TUT ADMINS got in this problem with the new questions ?

Hello,

thanks to shared me dump 350-401 . plz

Hi Guys,

Is there any labs in the exam?

@350-401

No labs in exam

@chris7890 – The right answer is D.

thank so much @digitaltut.

Hello,
How many questions has the exam?

I just passed the encore exam, could someone tell me where to study the dump for the ENARSI 300-410 exam?

PEOPLE, I passed the Exam today with 9XX , like 2 questions I did not recognized, 3 D&D … other than that , Premium is 100% valid, thank so much @digitaltut .. I am P now.

Hi
I have more course INE, CBTnuggets, itpro . tv and learning . oreilly . com
Who is interested in writing to the mail arturaliyev 89 @ gmail . com

@ NEXT_P

Congratulation ,, from where can i got Premium Dump

I am preparing for CCNP Route Exam. I would be helpful if I get the dump/ questions to practice. Can anyone share this ??