Share your ROUTE v2.0 Experience

the question i asked are these the most common ones or are other people getting both.

Can any one please provide the new Ip information for the OSPF Sim I heard the area and OSpf changed.

Thanks

I will be taking my test later today and need the new OSPF SIM commands and IP info,
Thanks

Is this still correct for the OSPF Sim ?

router ospf 1
network 192.168.4.4 0.0.0.3 area 1
router ospf 1
network 192.168.4.4 0.0.0.3 area 1

No, in my exam IP address was 192.168.14.5 and 192.168.14.6 area 8

Anyone take this exam in Europe – UK ?

@El CISCO GUY
good luck ! my exam is tomorrow please share your experience after you pass
I am waiting for your comment.

@Europe test taker, yes me in FR

@Gri

Seatle Router
router ospf 1 Or is it different
network 192.168.14.5 0.0.0.3 area 8

Indi Router
router ospf 1
network ospf 1
network 192.168.14.6 0.0.0.3 area 8

@Gri

Seatle Router
router ospf 1 Or is it different
network 192.168.14.5 0.0.0.3 area 8

Indi Router
router ospf 1
network 192.168.14.6 0.0.0.3 area 8

@Urgentneed :
Which of the following device determines the MSS?
A. Receiving host
B. Receiving host’s gateway
C. Sending host
D. Sending host’s gateway

C : Sending host..,,.

Passed today.
840.
Everything is still SUPER valid.

IPv6 OSPF Virtual Link Simulator
OSPF Simulator
EIGRP Evaluation Simulator

MQP, NUQ6, MUQ5

route was my last exam. passed 92x.
followed what others are saying on the exam relating to
MCQ(most popular), part5, part6 within premium.
Labs were exactly those three everyone is mentioning, go over all drag and drops.

you should be more than prepared if you do just that.

Failed

Labs : OSPF , OSPF Virtual link/ IPv6, EIGRP Eval, EIGRP stub
2 DD : AAA

80 % of questions were VRF, IPv6 , redistribution that I’ve never seen before :(

Refer to the exhibit. How does R1 handle the route to network 10.1.64.0/24?

R1
router eigrp 1
no auto-summary
redistribute ospf 1 route-map ospf-to-eigrp
default-metric 10000 10 255 1 1500

ip prefix-list ccnp1 seq 5 permit 10.1.48.0/24 le 24
ip prefix-list ccnp2 seq 5 permit 10.1.80.0/24 le 32
ip prefix-list ccnp3 seq 5 permit 10.1.64.0/24 le 24

route-map ospf-to-eigrp permit 10
match ip address prefix-list ccnp1
route-map ospf-to-eigrp permit 20
match ip address prefix-list ccnp2
route-map ospf-to-eigrp permit 30
match ip address prefix-list ccnp3

Passed yesterday, 8XX, got a tough time in the middle of the exam but then I just relaxed and let myself go…

Got same labs…
OSPF Sim (different AREA and OSPF ID)
OSPF IPv6 (virtual-links) don’t forget to delete the virtual-link between R3 and R4
EIGRP Sim same questions, don’t forget that you need to use the “show ip eigrp 1 topology” command on R1

My suggestion is to study MPQ, NU6, NR5 and the Composites Quizzes for “old questions”

Questions I remember…
D&D: Q116 FrameRelay Multipoint, Q132 GRE, Q206 AAA, Q208 uRPF, Q217 FrameRelay P to P, Q235 IPv6, Q244 ACL types, Q10 FrameRelay Components, Q38 from NUQ6 SNMP,

MPQ: Q7 EVN, Q9, Q71, Q121, Q36, Q96, Q70, Q104, Q156, Q190, Q32, Q39, Q136, Q146, Q158, Q185, Q207, Q223, Q231, Q254

NUQ6: Q50, Q40, Q17, Q9

NR5: Q26, Q30

cef-fast-switching Q2
access-list Q6
pppoe-questions Q3
RIP Q1
EIGRP Questions 2 – Q1
unicast-reverse-path-forwarding Q6

Question X
Something related to, what do you need to authenticate NTP
Refer to the exhibit. Which effect of this configuration is true?
Answer:
ntp trusted-key 1

Question X
Regarding what will happen if you configure “passive-interface” in RIP, you can find the answer on the explanation of Q28 of NUQ6

Question X
A DHCP Relay behavior if there are secondary interfaces, answer is the one with the “Smart Relay” word

@Rukaila
thank you!
this is the kind of posts that really worth it.

Hello @Bob,
Sorry to hear that. Could you please share from which country you registered for the exam?

@Rukaila

Congratulations, and thanks for sharing the details.

Just passed today with 8xx! OSPF virtual-link, OSPF Sim and EIGRP Sim. Most of the questions are valid with the MPQ, NUQ5 and NUQ6. Good luck guys!

Failed score 779

a new d & d of snmp is coming

@Rukaila
MPQ, NUQ6, NR5, Where can I find it?

Thanks you.

@CCNP Route you need to pay for the premium section of the page to gain access to those sections

@CCNP Route sorry for hearing that, which lab did you got ?

@BlueDeamon sorry for hearing that, which lab did you got ?

Question X
A DHCP Relay behavior if there are secondary interfaces, answer is the one with the “Smart Relay” word

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dhcp/configuration/15-sy/dhcp-15-sy-book/dhcp-relay-agent.html#GUID-AA420F95-DE5F-4996-B1E8-164A11D08698

Passed 79x. finish CCNP.

Many new question about IPv6, PPPoE, Framerelay,…
D&D: snmp messenge

I remember 2 D&D bellow:
1.
NAT64: + Use Network-specific prefix + Modify session during translation
NPTv6: + Modify IP header in transit + Map one IPv6 address prefix to another IPv6 prefix
2.
+ SVC: A circuit that provides temporary on-demand connections between DTEs + LMI: A signaling mechanism for Frame Relay devices + DLCI: A locally significant ID + FECN: An indicator of congestion on the network + PVC: A logical connection comprising two endpoints and a CIR

LAB: same
OSPF Sim (different AREA and OSPF ID)
OSPF IPv6 (virtual-links) don’t forget to delete the virtual-link between R3 and R4
EIGRP Sim same questions, don’t forget that you need to use the “show ip eigrp 1 topology” command on R1

Let study hard all question in the dump: ROUTE_OCT.pdf and mycertexam.com.

Goodluck.

giving exam in next one hr ….. route paper…i will update you….any last moment advice..

Hello guys
Could someone share the new 4 or 5 questions please ???

Is the Oct 2019 dumps still valid?

@Rukaila or anyone here to help me clarify:

cef-fast-switching Q2

What dump/file are you talking about? Q2 from where?

Thanks!

@Imstudying

cef-fast-switching
Question 2
A network administrator checks this adjacency table on a router.
What is a possible cause for the incomplete marking?

A. Incomplete ARP information *
B. Incorrect ACL
C. Dynamic routing protocol failure
D. Serial link congestion

http://www.digitaltut.com/final_flash/CEF_Fast_Switching/quiz.html?

Hi! Passed today with the result 9xx.Now I’m CCNP)). Passed 4 exams in 3.5 months (CCNA, CCNP). All questions from dumps. 1-2 new questions. But if you have worked with dumps, it is easy to answer them.
Labs : OSPF Lab with Stub Area, OSPF Evaluation Sim, OSPF Sim.
D&D: one new. The other three are known from the dumps.
Thanks to the forum. Very helpful in preparation.

someone with the new snmp D&D

Passed route few days back. Still the route oct is valid. Few new DnD and few new MCQ questions.
Got Eigrp eval, ospf sim and ospf vl.
All the best guys and thanks everyone for sharing your experience.

https://www.digitaltut.com/ospf-questions-2-2

• OSPF chooses routes in which order, regardless of route’s administrative distance and metric? (Choose all that apply.)

A. Intra-Area (O)
B. Inter-Area (O IA)
C. External Type 1 (E1)
D. External Type 2 (E2)
E. NSSA Type 1 (N1)
F. NSSA Type 2 (N2)

What is the correct answer? The discussion in OSPF questions 2 is very interesting, it looks like ABCDEF is not the proper answer. Thanks!

Hi everyone, I successfuly pass my examen today with 88x. Thanks Digitaltut, A 90% aprox of all exam is here.
Maybe 4 new questions, but is very easy.

I remember a question about MPP

Which two protocols ca be affected by MPP? (Choose two)

a. OSPF
b. FTP
c. HTTPS
d. BGP
e. VTP

The Lab’s were OSPF Evaluation Sim, EIGRP Evaluation Sim, OSPF Sim, IPv6 OSPF Virtual Link Sim.

PD: My english is bad because I talk spanish. Sorry for my english.

Good Luck!!!

ABCDEF correct order

Yesterday I failed ,the labs no problem, but there were many questions that must be studied . So I don’t think so have a second chance, debugg is a topic when more questions and I waited more topics from route redistribute bgp route maps Because it’s route but when the uncle Cisco nothing is dure, I hot 718 from 790 in 55 questions My acknowledge in ccna helpe to get this , the labs were ospf vlink , ospf and eigrp eval. Congrats to Everybody that is passing

Anonymous, аll questions are here, add perseverance in the study and you will succeed. I wish you to pass the exam successfully!!!

On Premium page show this output:

router ospf 1
network 192.168.4.4 0.0.0.3 area 1
router ospf 1
network 192.168.4.4 0.0.0.3 area 1

Dont’s wrong??

on OSPF SIM

Passed my exam few days ago with 8XX
Important: Member account and I’ve studied old questions
LABS: EIGRP Evaluation Sim / OSPF Sim / IPv6 OSPF Virtual Link Sim ( same as here with different Ip’s but same masks )
You have to understand the questions, because sometimes, questions are a mix or a variant of the questions that appear here. Questions are 55
To have the premium member account is perfect
No panic, most of the questions are here
Good luck to everyone

@Gambito11

Which two protocols ca be affected by MPP? (Choose two)

a. OSPF
b. FTP
c. HTTPS
d. BGP
e. VTP

Answer: FTP and HTTPS

MPP = Management Plane Protection.

https://www.cisco.com/c/en/us/td/docs/ios/security/configuration/guide/sec_mgmt_plane_prot.html#wp1061312

hi Gambito
so you had 4 labs ?

Passed today with 8xxxLAB: same
OSPF Sim (different AREA and OSPF ID)
OSPF IPv6 (virtual-links) don’t forget to delete the virtual-link between R3 and R4( don’t forget to assign IPV6 addresses to loop back 0 on router 1 and Router 4. To test connectivity show IPV6 route
EIGRP Sim same questions, don’t forget that you need to use the “show ip eigrp 1 topology” command on R1.

MCQ, New Question 5 and New Question 6

I have question:

when you guys talk about EIGRP Sim in exam you means EIGRP Evaluation Simulator ???

@ko

Yes.

@Route 101

What do you mean by “don’t forget to assign IPV6 addresses to loop back 0 on router 1 and Router 4”?

The Premium Member’s practice lab on the IPv6 OSPF Virtual Link Simulator doesn’t touch anything about having to assign any IPs on Routers; it just shows you to create the virtual links and to remove the old/unused configs.

Can you explain and elaborate on this?
Please, help.

Thanks.

@Route 101

Are you referencing this?

R4(config)#int loopback 0
R4(config-if)#ipv6 ospf 1 area 54

R1(config)#int loopback 0
R1(config-if)#ipv6 ospf 1 area 0

Please, confirm.

Thanks.

Which two protocols ca be affected by MPP? (Choose two)

a. OSPF
b. FTP
c. HTTPS
d. BGP
e. VTP

The Lab’s were OSPF Evaluation Sim, EIGRP Evaluation Sim, OSPF Sim, IPv6 OSPF Virtual Link Sim.

PD: My english is bad because I talk spanish. Sorry for my english…..