Share your ROUTE v2.0 Experience

No updates ….giving my exam soon

Hi,

I have a doubt regarding EIGRP REDIS SIM.

The R1 AND R2 running EIGRP too or only R2 and R3?

2018 latest CCIE Dumps
freeciscodumps dot com
rs-ccie dot php

Can anyone share the dump file plz? sep13tember at gmail dot com

@ dexter,
I found this question answer conflicting,

Refer to the exhibit

configure terminal
ip flow-export destination 192.168.10.1 9991
ip flow-export version 9

How can you configure a second export destination for IP address 192.168.10.1?

A. Specify a different TCP port
B. Specify a different UDP port
C. Specify a VRF
D. Configure a version 5 flow-export to the same destination
E. Specify a different flow ID

Correct Answer: C
I could choose B
please anyone who can help me to understand why C?

heello Everyone
plz i need CCNP route Dumps

@Udara.
Thank you.

please share dumps ahmedmadiboi @ yahoo.com

Hi Okello,

actually your answer is correct:

https://www.cisco.com/c/en/us/td/docs/ios/12_0s/feature/guide/12s_mdnf.html

You need to specify just another UDP port as simple as that

Hi Des,
Folllowing your link I have found that:

Note Do not enter the same ip address twice. However, entering two different ip addresses with the same udp port number is configurable.

thank you @Des for your feedback

Hi all,
I have Dexter dump ( updated 23.12) with 450q, but in comments i see that people study Dexter dump with 470q. Can someone share this dump? Thanks in andvance! My mail artemmiet @ gma!l.com

Please shared the dump

top.bassam2012@
gmail.com

HI @alandar @ PK PLEASE SENT THEM TO ME

top.bassam2012@
gmail.com

passed today 97x
from Sri Lanka

SIMs:PBR, OSPF Config, OSPF Evaluation, EIGRP Evaluation, Redistribution.
D&D: AAA, IPv6, FR, Loose/Strict

THqqq Dexter…
Dexter dump stil valid**** no new question.
i think procyber is 96% Dexter 99%
and thqq digitaltut.com all labs are same this site (change IP, Area _)

@udara_SL sent them to me

@udara_SL congratulation

plz share dumps ahmedmadiboi @ yahoo.com

@udara_SL congratulation
could you please send me the dump you have studied. email> {email not allowed}

Passed yesterday with 8xx
No new questions
Labs: PBR, Eigrp ospf redistribution, Ospf sim, Ospf evu, Eigrp evu, D&Ds, thank you Dexter!
VPN also 67%, I think that there could be ambiguous questions in this topic, where Cisco expect another answers…
It worth to pay for premium membership on this site…

Hi all, are the quizzes on the front page (flash quizzes) not the questions that are in the test?

Hi Leo,

Could you please tell me where can i get the questions to the Sims and the Labs, as they are no questions but only answers and explanations to it.

@navya
As you could find in previous comments, Dexter posted his works here… it’s too difficult for you people to scroll up/down some pages???

https://mega.nz/#!tFMTCQzJ!sEQpzx3xRnkplOh-nG8N-rckxZSIdEwj69ux0sJvo0w

@Leo, i hv that link and saw that.

But there are no questions in the sims or labs.

There is only answers and explanations for labs

@Leo, its directly the explanation:

Question 1
Explanation
To check OSPF LSA we should use the “show ip ospf database” command on R5:

Please guys i have an important question. When using the VCEs, specifically when doing the DnDs, i notice that it marks the answer as wrong if it isn’t in a particular order.
Please is this important for the exam as well. Do we need to provide our answers in the exact order that the VCE provides?
Reference to Dexter VCE

@navya
qustions are available for premium accounts on digitaltut…

@Mard, yes I misread that !
but I’m not sure selecting vrf …

@all, I passed the exam with 93x today.

Dexter’s dump -> 454q is totally valid. (except for 1q which i forgot or whatever lol)

all labs are found from this site:
OSPF SIM -> names, subnets, area IDs and router IDs are different

EIGRP-OSPF redistribution SIM -> Metric values are different, R2 R3 are FastEthernets!
You can actually the path by using traceroute on R1

PBR SIM -> subnets are different

EIGRP & OSPF Eval SIM
For both: You need to know a decent understanding of those protocols to retrieve the information and answer the questions. For me it was a very tricky cuz many commands are not allowed! The requested information of the routers can vary !
Furthmore on the EIGRP Eval SIM the show ip eigrp –>1<– topolgy is important. You will just get an error while typing the command w/o 1 !!

All other Qs and DnDs are in Dexter's dump.

PS. Passing score is only 790, which is actually low hahaha
Good luck fellows !!!

I failed Route Exam 300-101 by 760. I had issue with OSPF SIM. I created stub Area 2 then added Indianapolis and Los Angles router then I was asked to Ping loopback of New York router from Los Angles. Configuration was locked on New York router. I ran s hip interface brief on New York Router only S0/0 was configured and it was up. There was no loopback configured on New York router.

Also I could not use Show IP EIGRP Topology on one of the router.

ALWAYS block the outbound web traffic on Saturdays and Sunday between 1:00 to 23:59
A. periodic Saturday Sunday 01:00 to 23:59 and IN
B. periodic Saturday Sunday 01:00 to 23:59 and OUT
C. periodic Saturday Sunday 01:00 to 11:59 and IN
D. Absolute Saturday Sunday 01:00 to 11:59 and IN
B
QUESTION 13
If routers in a single area are configured with the same priority value, what value does a router use for the
OSPF Router ID in the absence of a loopback interface?
A. The lowest IP address of any physical interface
B. The highest IP address of any physical interface
C. The lowest IP address of any logical interface
D. The highest IP address of any logical interface
Correct Answer: B

QUESTION 14
In which scenario can asymmetric routing occur?
A. active/active firewall setup
Dexter ITC
B. single path in and out of the network.
C. active/standby firewall setup
D. redundant routers running VRRP
Correct Answer: A

What is a possible cause for the incomplete marking?

A. incomplete ARP information
B. incorrect ACL
C. dynamic routing protocol failure
D. serial link congestion
Correct Answer: A

QUESTION 21
How does an IOS router process a packet that should be switched by Cisco Express Forwarding without an FIB
entry?
A. by forwarding the packet
B. by dropping the packet
C. by creating a new FIB entry for the packet
D. by looking in the routing table for an alternate FIB entry
Correct Answer: B

Which two actions must you perform to enable and use window scaling on a router? (Choose two.)
A. Execute the command ip tcp window-size 65536.
B. Set window scaling to be used on the remote host.
C. Execute the command ip tcp queuemax.
D. Set TCP options to “enabled” on the remote host.
E. Execute the command ip tcp adjust-mss.
Correct Answer: AB

Which two actions must you perform to enable and use window scaling on a router? (Choose two.)
A. Execute the command ip tcp window-size 65536.
B. Set window scaling to be used on the remote host.
C. Execute the command ip tcp queuemax.
D. Set TCP options to “enabled” on the remote host.
E. Execute the command ip tcp adjust-mss.
Correct Answer: AB
Section: 1.0 Network

Question 1
Frame Relay LMI autosense. What are true? (Choose two)
A. Line should be up and protocol should be down
B. Protocol must be up
C. It only works on DTEs
D. It only works on DCEs

Answer: A C
Explanation
LMI autosense is automatically enabled in the following situations:
+ The router is powered up or the interface changes state to up
+ The line protocol is down but the line is up
+ The interface is a Frame Relay DTE
+ The LMI type is not explicitly configured on the interface
Reference: CCIE Practical Studies: Security
Question 2
What is true about peer groups? (Choose two)
A. Optimize backdoor routes
B. If you change configuration then it effects all peers in the group
C. Peer groups can send soft updates to all
D. Updates can be sent with multicast

Answer: B C
Question 3
What is the minimum privilege level to enter all commands in usermode?
A. Level14
B. Level0
C. Level1
D. Level15

Answer: C
Question 4
Which two statements about password-protecting device access are true? (Choose two)
A. The more system:running-config command displays encrypted passwords in clear text
B. The service password-encryption command forces a remote device to encrypt the password
C. A network administrator can recover an encrypted password
D. The privilege level command controls the commands a specific user can execute
E. The password can be encrypted in the running configuration

Answer: D E
Question 5
IP CEF load-sharing options (Choose three)
A. Tunnel
B. Universal
C. Include-ports
D. Source
E. Destination

Answer: A B C
Question 6
Which NetFlow version supports MPLS?
A. none
B. all of them
C. version 8 and 9
D. version 9

Answer: D
Explanation
MPLS-aware NetFlow uses the NetFlow Version 9 export format. MPLS-aware NetFlow exports up to three labels of interest from the incoming label stack, the IP address associated with the top label, as well as traditional NetFlow data.
Reference: https://www.cisco.com/c/en/us/td/docs/ios/12_0s/feature/guide/fsmnf24.html
Question 7
What is the minimum log level for the event generated when an ACL drops a packet?
A. 4
B. 5
C. 3
D. 7
E. 6

Answer: E
Explanation
When the ACL logging feature is configured, the system monitors ACL flows and logs dropped packets and statistics for each flow that matches the deny conditions of the ACL entry.
The log and log-input options apply to an individual ACE and cause packets that match the ACE to be logged. The sample below illustrates the initial message and periodic updates sent by an IOS device with a default configuration using the log ACE option.
*May 1 22:12:13.243: %SEC-6-IPACCESSLOGP: list ACL-IPv4-E0/0-IN permitted tcp 192.168.1.3(1024) -> 192.168.2.1(22), 1 packet
Reference: https://www.cisco.com/c/en/us/about/security-center/access-control-list-logging.html
From the example above we can see when an ACL drops a packet, it generates a level 6 Syslog (%SEC-6-)
Question 8
What other action does an IPv6 filter do when it drops a packet?
Answer: generates an ICMP unreachable message
Question 9
What is the NHRP role in DMVPN? (Choose two)
A. Obtains the next-hop to be used for routing
B. Routes the packet through the tunnel
C. Identifies the PIM-SM RP used to route the packet
D. Can authenticate VPN endpoints
E. It requires each tunnel endpoint to have an unique network ID

Answer: A D
Question 10
What from the following can cause an issue for uRPF?
A. Asymetric routing
B. CEF not enabled
C. uRPF not applied to the traffic source
D. if it is used as ingress filtering

Answer: A
Question 11
Which two routers can do OSPF route summarization? (Choose Two)
A. ABR
B. ASBR
C. Summary router
D. internal router
E. Backbone router

Answer: A B
Question 12
What is supported RADIUS server? (Choose two)
A. telnet
B. authentication
C. accounting
D. authorization
E. SSH

Answer: B D
Question 13
Which two commands do you need to implement on a router to support PPPoE client?
A. peer default ip address pool
B. MTU
C. bba-group pppoe
D. pppoe enable group
E. pppoe-client dialer-pool-number

Answer: B E
=========================New Updated Question (added on 14th-Dec-2017)=========================
Question 14
Which two features RADIUS combine (Choose two)?
A. telnet
B. SSH
C. Authentication
D. Authorization
E. Accounting

@ST,
Yes indeed, in that SIM I also can’t find any loopback interface from command sho ip int bri, but, when I entered sho ip route, it gieves me one of loopback interface as marked as connected… So, I could ping that loopback interface…
As per show ip eigrp topology, as was written before by mates, and in Dexter explanations, you could enter sho ip eigrp 1 topology…

Hi, do you guys have a link of one book which cover all the lesson of CCNP Route that we can download?

@GT, you can use How to master CCNP Route book by Rene Molenaar. it is really nice book for preparing Route exam.

Hi Leo,

Where can I get the 484 Question please? If possible would you be able to email me a copy please? My email address is below.

ttciscohelp AT yahoo DOT com

@leo
do you share lab and sims questions with us?
where can we access lab questions?

Thank you for your help…

Who have this 484 Questions 100% valid

plz send them to my email

top.bassam2012@
gmail.com

Please can any one send dumps to my mail ID sainetwork.sai @ gmail . com

Hi,
Who have this 484 questions

please send them to my email

jurii763 @outlook.com

Passed Today .

Thx for the great site Digitaltut,
ALL questions, Drag&Drops in Dexter Dumps, Thx Dexter.
Labs: PBR, Eigrp ospf redistribution, Ospf sim, Ospf evu, Eigrp evu.

Low score in VPN Technologies, although i thought i answered right !!!, may be the questions were quite different !!!!

good luck all.

@udara_SL

For QUESTION 14 you posted above, is it really A) active/active firewall setup? Most of the answers I am seeing is D. redundant routers running VRRP.

Anyone, please enlighten us. Thank you.

@diegos it says RIP NOT RIPng, u can’t enable rip from int level

hey guys, i am preparing for exam, can anyone share dumps at pro6151945 at gmail dot com
Thanks in advance

pleeeeeeeeeeeease someone explain Q14????? answer A is correct or D ?

Orayt, looks like A is really the answer for Q14. I just Googled it and found bunch of stuff regarding firewall in relation to asymmetric routing.

going for 300 101 tomorrow

I´ll keep you updated

Nismo99 can you please send me updated dumpts at pro6151945 at gmail dot com
Wish you all the very best for the exam

Hello, I see that majority of the community here is utilizing the dexter dump for their exam. I have been studying the procyber dump. Does anybody have the questions that have different answers or new questions on the dexter dump that is not on the procyber?

Ill be taking the exam tomorrow and wont have time to go through the dexter dump entirely. Please help a brother out.

Much Appreciated!

Hi share dump files

Hi folks,

just wanted to share. interesting youtube playlist from RIPE where ipv6 transition mechanisms are explained, including NAT64

https://www.youtube.com/playlist?list=PLDWsJmznqM9Hyutn-cF2NwQEqtXY1ujY6

Can someone tell me how I can get Dexter dump? Please share.