Share your ROUTE v2.0 Experience

@zm, can you tell us about labs and sims.

Going to take exam in few hours , any last minute tips ??

@zfr: good luck and all will be good if you went through d&d, labs and MPQ/NQ5/NQ6

please let us a feedback after. for sure you will go over 800+

@clement: did you go through all composite q also? or just MPQ/NQ5/NQ6?

@al C&D is correct

@MAD, thanks but really confused, any explanation ?

Thanks @trom

Passed CCNP:ROUTE last week with 8xx.
Definitely review the “Most Popular Questions.” I had several from this section that I believe are NOT in the other topic areas on the right-side of this page.

Lab sims and Evaluation sims are still relevant.

Got a couple of questions that I hadn’t yet seen. One in particular had to do with DHCP behavior when you have an interface with a primary IP address and multiple secondary IP addresses. Not sure what the correct answer…The answers involved something like, “The interface will forward DHCP DISCOVER messages from primary IP and all secondary IP’s,” “The interface will forward DHCP DISCOVER messages from primary IP and only one secondary IP.” I don’t remember the other options, but I don’t think either were correct, but I could be wrong.
Another question had a topology exactly like one of the questions from “Most Popular Questions: EIGRP,” where BR1 has configured as a stub. The difference was that the exam question asks what the route table on HQ-R1 should look like; you have 4 options to choose from. Two options do not have the link between BR1 and HQ-R2 in the routing table, nor the /32 of the loopbacks. One of the other two options does have the link between BR1 and HQ-R2 AND the /32 for the loopbacks…it’s hard to explain…the point is, I don’t believe that question is one this site, so this is a heads up. I’m not sure what the correct answer is since I have never actually implemented EIGRP real-world; we are mostly a switched environment with some really simple OSPFv3.

I didn’t score as high as I had hoped, but I also didn’t get to prepare for this exam as much as I would’ve liked due to the time crunch of needing to still complete ROUTE and TSHOOT before 24 Feb. So, there were several questions from the practice test, (that I didn’t totally understand), that I didn’t get to research as much as I should have.

NOTE: I’ll try to check back on this forum to answer any questions, but don’t hold your breath. If I don’t respond, I’m sorry but I’m moving on to TSHOOT.

how many d&d did you got? all were covered on site?
did you also studied composite q?

good luck with tshoot!

@AL
The ABR sends per default a summary route into stub and totally stubby areas. But he do not send it in a nssa or totally nssa therefore you need an extra cmd to get the default route in such an area –> area nssa default-information originate

NEW – DHCP Question
1. A DHCP Relay behavior if there are secondary interfaces. Options were:
a) broadcast DHCPDISCOVER only from primary address
b) broadcast DHCPDISCOVER from primary and one of the secondary addresses
c) broadcast DHCPDISCOVER from primary and all secondary addresses
d) if DHCP server is not reachable via primary address, broadcast DHCPOFFER from secondary addresses

You only need to configure helper addresses on the interface where the UDP broadcasts that you want to forward to the DHCP server are being received. You only need to configure the ip dhcp smart-relay command if you have secondary addresses on that interface and you want the router to step through each IP network when forwarding DHCP requests. If smart relay agent forwarding is not configured, all requests are forwarded using the primary IP address on the interface.
If the ip dhcp smart-relay command is configured, the relay agent counts the number of times that the client retries sending a request to the DHCP server when there is no DHCPOFFER message from the DHCP server. After three retries, the relay agent sets the gateway address to the secondary address. If the DHCP server still does not respond after three more retries, then the next secondary address is used as the gateway address.
This functionality is useful when the DHCP server cannot be configured to use secondary pools.

I think the correct answer is A
In the case there is something mentioned about the ip dhcp smart-relay feature then answer D is the correct one

Labs were ospf virtual link, ospf and eigrp sim

thanks MAD, found on the net:
https://www.cisco.com/en/US/docs/ios/12_4t/ip_addr/configuration/guide/htdhcpre.html

Perform this task to configure smart relay agent forwarding.

You only need to configure helper addresses on the interface where the UDP broadcasts that you want to forward to the DHCP server are being received, and you only need the ip dhcp smart-relay command configured if you have secondary addresses on that interface and you want the router to step through each IP network when forwarding DHCP requests. Without the smart relay agent configured, all requests are forwarded using the primary IP address on the interface.

If the ip dhcp smart-relay command is configured, the relay agent counts the number of times the client retries sending a request to the DHCP server when there is no DHCPOFFER message from the DHCP server. After three retries, the relay agent sets the gateway address to the secondary address. If the DHCP server still does not respond after three more retries, then the next secondary address is used as the gateway address.

This functionality is useful when the DHCP server cannot be configured to use secondary pools.

@trom

I had about 5-10 d&d. All were from this site, I believe. I got both serial d&d questions, just fyi.

I did not study the composite quizzes. I feel like those can be very useful, especially if your brain has made some association between the specific topic area and the correct answer AND there are similar questions with a different answer…I definitely did the composite quizzes for switch as I had more time.

Hi
@al what is the answer this question?
1. A DHCP Relay behavior if there are secondary interfaces. Options were:
a) broadcast DHCPDISCOVER only from primary address
b) broadcast DHCPDISCOVER from primary and one of the secondary addresses
c) broadcast DHCPDISCOVER from primary and all secondary addresses
d) if DHCP server is not reachable via primary address, broadcast DHCPOFFER from secondary addresses

What is the answer? Pls help.

1. A DHCP Relay behavior if there are secondary interfaces. Options were:
a) broadcast DHCPDISCOVER only from primary address
b) broadcast DHCPDISCOVER from primary and one of the secondary addresses
c) broadcast DHCPDISCOVER from primary and all secondary addresses
d) if DHCP server is not reachable via primary address, broadcast DHCPOFFER from secondary addresses
2. What options should be configured when implementing GRE over IPSec?
a) Tunnel key
b) ip tcp adjust-mss
c) ip redirects
d) smth else
3. An engineer decided to secure IPv6 environment with traffic filters and blocks all link-local addresses. What will happen to OSPFv3?
a) OSPF neighborship still in use, but no updates are exchanged
b) OSPF neighborship fails in the area where the traffic filters are implemented
c) and d) – can’t remember.

What is the answer?

A network engineer wants an NTP client to be able to update the local system without updating or synchronizing with the remote system. Which option for the ntp access-group command is needed to accomplish this?

A. Serve
B. Serve-only
C. peer
D. Query-only

Hi there
Any one else with Premium having issues running the Adobe quizzes now?

Please share valid dump guys
My email id majesticole@yahoo . fr

Hello Guys,
Does anyone have or posted prints from the 300-101 real test?
If not…if you have it please share with us…I got premium account here!

jrt

@al what is the answer this question?
1. A DHCP Relay behavior if there are secondary interfaces. Options were:
a) broadcast DHCPDISCOVER only from primary address
b) broadcast DHCPDISCOVER from primary and one of the secondary addresses
c) broadcast DHCPDISCOVER from primaryed and all secondary addresses
d) if DHCP server is not reachable via primary address, broadcast DHCPOFFER from secondary addresses

@Ssay Don’t know if you’ll read this but I’d say just the MPQs and NUQs are not enough to pass. I had tried that along with D&Ds and Labs previously (back early december if I recall) and failed the test with a 705. It was close sure but not enough.
But your mileage may very well vary. I also believe I didn’t take my time with questions, I was a bit stressed and sad at the questions, perhaps I could’ve passed that time.

Anyone have latest 2020 dumps?

hi gyas any news q and dumps viled plese send me in emill (gadorashaker)(@)(gmail.com)

1. A DHCP Relay behavior if there are secondary interfaces. Options were:
a) broadcast DHCPDISCOVER only from primary address
b) broadcast DHCPDISCOVER from primary and one of the secondary addresses
c) broadcast DHCPDISCOVER from primaryed and all secondary addresses
d) if DHCP server is not reachable via primary address, broadcast DHCPOFFER from secondary addresses

Ans: D

Passed with 8xx. Studied all composites and labs from here. Cert guide and Boson exams mixed in prior. Content here is solid. Had a few questions I didn’t recognize and don’t remember. Moving onto Switch before deadline hopefully. Thanks so much DTUT as said content is solid.
LABs in order: OSPF Sim, EIGRP eval, OSPF IPv6 VL. Content the same just different ips and naming.
D&D: Was surprised to only get 3. AAA, BGP, Frame Relay
My route premium goes to the deadline 2/23/20. If anyone wants it for $10 send me an email.
switch010101 at gmail dot com

Passed

Oct PDF valids but Premium Acct updates new questions with dates. Study all Oct PDF with explanation, read Share Your Exp, Cisco Press Certs Guides & understands theorys & concept dont just memorize

D&D – AAA, NAT64, NPT, Frame Relays

Labs – OSPF Stubs, IPV6 Virtual Links & EIGRP Evals

DT best. Best luck everyone.

@Pacific1 congrats ! please share Oct PDF
c i s c o z d 9 2 (at) g m a i l (dot) com

The new question here about the dhcp is not the same as given on the exam. I already post here a cisco article related to the correct question. Read dit and choose on the exam the choice who Smart word on it.
Good luck

Hi Friends
PBR LABS how can i check for correctly ? ping or how?

ping won’t work die acl looks for tcp/80 you can try telnet 80 and then you check with show route-map if the right rule is hit

@MAD can i use telnet in real exam?

Passed 8xx

I had same DnD and Labs as Pacific1 has described above, few new questions however a lot of questions from tut MPQ NUQ-5 NUQ-6, highly recommend premium, really helps with the tutorials and explanations.

watched videos, read up on the cert guide, it is important to understand what is asked on the question, just going through past questions and answers could have you trip up on few key changes there are similar questions with differing answers, read the questions properly.

OCT PDF can be found by navigating on this tut site ROUTE FAQ on the menu on right hand side

Good luck to all

Hey guys,
what are these; MPQ NUQ-5 NUQ-6 ? Where can I found them?
Thanks to let me know. I’ll take the exam within a few days, hope I’ll able to be ready for it.
Good luck everyone

@IP_Precedence
R u premium member?

@Hiko I think in the real exam there is a web browser simulator or something similar

Passed with 9xx. Labs ipv6 virtual links, ospf sim and eigrp eval. No more than 10 new questions.

@Cjay are they all new questions? /No more than 10 new questions./
Did you use all dumps?

Passed with 8xx.

All data here are valid. Got new questions, around 2.Thank you digitaltut! Moving on to the last exam

@TUTer
Do u remember new questions?

Guys do u use bbs. hh010. com dumps?

Passed today with 8xx. Exam was pretty easy. 51 out of 54 questions were from this site. Labs are also from this site….D&D also from this site. Reviewed every topic carefully, tested every topic 3-4 times, passed composite quizzes, the quizes from MPQ…reviewed only 1 time MPQ, New Updated questions 5&6

Good luck to all!

@Nim hey Nim,
No, my country doesn’t let me use paypal :(
Do you know any alternative path to become premium payment?
Thanks man for your attention

* I wanted to say; “Do you know any alternative path for premium payment?”

Hello all,
I have just passed my exam with 9XX and the most of the questions are included in the digitaltul questions (MPQ, NQ5 and NQ6)
The drag and drops (4 or 5) and the LABs (OSPF Sim, EIGRP eval sim and IPv6_OSPF_virtual_link_Sim) are ALL included aswell
Thanks a lot DigitalTut for the help!!

Congrats Paco,
For seeing MPQ, NQ5 and NQ6 , should be I premium member?

I am tacking Route Exam next week. Please share valid dump pdf at janvipatel0226 at gmail dot com Thank you in advance.

@IP_precendence, only for preparing the LABs, I would pay the premium account. In addition, with the premium account, you could prepare the MPQ for each particular topic (BGP, NTP, OSPF, etc.) and later, you can make the MPQ composite quizzes (which includes 50 randomly taken questions from the specific-topic questions above) and, the most important thing is that, at the NQ6, appears NEW questions from the last January examns that they dont appear in the free pdf…
So, from my point of view, it is a great investment the premium account if you want to ensure (as much as possible) your success with the exam

Thank you @Paco_Pepe, I want to become premium but I need a solution to have it. As I said before my country doesn’t let me to use Paypal services :(
@Admin how can I pay via another way? Can you please help me?
Thanks