Share your ROUTE v2.0 Experience

Just use the Digitaltut premium account access, don’t go wasting your money on all those other sites that claim to have updated dumps. Most of the the other sites just rip the stuff of the digitaltut premium access anyway, so you end up paying more and getting less. At least here you will have a solid community of people that fact check answers and are willing to help, plus the premium access quizzes are done in java and get randomized so you are actually learning the question and the answer, instead of just looking off some PDF or using VCS where the answer is always in the same place so you just memorize the answer letter/number and not the actual contents behind the questions.

I just read on the official cert guide that correct is A

6.Which adverse circumstance can the TTL feature prevent?
A. routing l jkloops
B. DoS attacks
C. link saturation
D. CAM table overload

answer is: A

I passed my exam on 2nd attempt with 79x a pass is pass but i really don’t know were I went wrong the labs got 70% on them

I took the exam yesterday and passed with 814 marks.

There were 3 to 4 new questions in multiple choice questions (don’t remember).

I received two labs (ipv6 ospf and ospf: where the ospf id was changed from 37 to 23 and area was changed from 23 to 39, also Seattle router’s IP address was changed from 192.168.3.5 to 192.168.19.5.

@nerdyys did u study all the stuffs here or MPQ,MPQ-Update 5 & 6 or Oct dump ?just want to know because i’m studying only MPQ,MPQ-Update 5 & 6

Passed with 83*/1000. Thanks digitaltut.com and mycertexam.com for providing free platform.

Hi Kiran

please advise what came out

Thanks,

Am writing exam on 17th.
@Chimchanga @nerddys
tell us more on the ospf sim lab that you got please

Please guys, where i can find MPQ and Updates 5 and 6? Help :)

Hi guys,
so I passed today 8xx. I can confirm that questions are still valid based on digitaltut.
I can only recommend to buy premium account to see all questions and labs if you want to be sure to pass.
I had about 10-15question from “most popular questions” but I found out, that not all of them are in other sections as well, as I went through these most-popular just once and then concentrate on individual sections and new updated questions 5 and 6, so maybe this is reason I had just 8xx score.
Labs were same as here ospf sim, eigrp evaluation simlet (sho ip ei 1 topo – works), ospfv6.

so good luck to all who are preparing to exam :)

Hi DigitalTut.
I am (now accidentally) a Premium Member.

I wanted to signup for the TSHOOT membership, but in my absence of my (doing 1000 things at once) i accidentally signed up for ROUTE.
I signed up for 1 month yesterday. So i have 29 days left on the membership.

May i please request that you transfer my membership to TSHOOT.

Please let me know.

Which two areas does OSPF send a summary route by default ? (Choose two)
A. NSSA
B. Backbone
C. Totally stubby
D. Stub E. Normal

Answer: C D or A D ??????

Which BGP option is required when load sharing over multiple equal-bandwidth parallel from a single CE router to a single ISP router over eBGP?
A. eBGP Multipath
B. eBGP Multihop
C. BGP Synchronization
D. Public AS numbers

A or B?????

Hello Guys,

How many questions did you take?

Best Regards.

Hi everyone,

Passed exam today. If you have gone through updated questions 5 & 6, MPQs and composite then you’ll surely pass.

Exactly same labs. Ospf ipv6 virtual link, ospf sim, eigrp Eva.
Only 2 D&Ds
3-4 new questions.

One of regarding “what’s true about conditional debugging”
Other was “what area uRPF modes”

Can’t remember other.

how many MCQ are there on premier site ?

Did you do the older Composite questions?

@TutFanJ give me your mail …

Passed my exam today with 9xx (lower 900s)!
I used the premium digital compiste quizzes, most popular questions, and updated questions 5/6 along with the labs provided by digitaltut.

– Updated questions 5 and 6 are still valid and the questions are still worded the same.

– Most Popular questions and Composite quizzes are still valid,however, some of the questions have been worded and seemed a little different on the exam (this threw me off a little and made me stress the question more than I needed too). Don’t stress the rewording too much, the answers for the questions still seemed the same but I would make sure you truly understand the question and answer and not just memorizing answers.

– Drag and Drops
AAA, Frame-Relay (point to point process), uPRF (loose vs Strict), Frame Relay (data link connections), SNMP (know what manager, agent, get, set, and notification are), and NHRP.

Labs
IPV6 OSPF Virtual Link, EIGRP Evaluation, and OSPF sim – all the same as Digitaltut.

Hi Guys pass today 913/1000

* All question here, not new question in my exam today.

* D&D – Frame Relay LMI, Frame Relay Links (DLCI, FECN…), AAA, SNMP (agent, MIB…), NAT64 (Stateless vs Statefull).

*LAB – LAB OSPF Sim (OSPF ID 24 AREA 38), EIGRP EVALUATION, LAB IPv6 OSPF (same here but pay attention not work the command “copy running-config start-config”. When you finish click next. read the advertised exam.

My advice is to be Premium Member and study all question here (composte quizzes, most popular questions, and updated questions 5 6 and topics individually.

take a look at this digitaltut directory https://www.digitaltut.com/category/route-642-902
dropped some questions from here

Thanks DIGITALTUT and the everybody here. Se you on TSHOOT

Good Luck for all

Everyone I passed today, I got few new remake question around 7 – 9

Sim, OSPF sim and IPv6 Sim virtual-link both with different IP and area and OSPF process, the EIGRP Evaluation as well.

if you understand the concepts you will pass, in my case I did few question by discarding choices and pickup the best ones or the one that make more senses to me, so is important that you understand the concepts.

great site digitaltut, I am taking TSHOOT early on February, good luck for all

When you say composite do you guys mean composite quiz based off most popular questions? or the older questions?

@everyone i asked that question and got no answer. plus what is different about the premium you can get the dumps with out being premium so what does premium get you?

If my cert expire at Fed 20th, 2020; can I do a exam to renew at Fed 20th, 2020 or I have to take exam sooner ?

@sadboi

Be a curious cat. Get premium and see the difference. Without premium, Digitaltut gave you answers but you don’t see the questions. With premium you see questions with solutions and explanation with references. You also got to practice the questions using flash. I don’t $19 is too much an investment to guarantee success.

Is everybody getting?

which AAA D&D is everybody getting?

@speedy
This is the one that it is.

Authentication:
+ supports a local database for device access
+ supports encryption
Authorization:
+ specifies a user‘s specific access privileges
+ enforces time periods during which a user can access the device
Accounting:
+ not supported with local AAA
+ verifies network usage

just passed the router with 82x.
around 10 question are new. and very hard.
some question from question part 6
some question from most popular question
lab 1. OSPF ipv6, EIGRP SIMLET, OSPF SIM.

my strategy : learn the popular question, update 6 and update 5. all DnD
+
make the LAB full mark so can compensate the new question.

good luck

Hi Guys how can i get Most Popular question? please help me

@Hiko check “ROUTE FAQs & Tips”

what do you think is the best answer

6.Which adverse circumstance can the TTL feature prevent?
A. routing loops
B. DoS attyacks
C. link saturation
D. CAM table overload

Answer: A or B?

@HW1
Greatgoin(@)gmaildotcom

Thank you HW1

I can’t find any examples in here.

I Passed two days ago. score:8xx
Only Route_Oct_2019 is enough. Thanks to the Digitaltut team and the valuable comments shared here.

Only Route_Oct_2019 is enough. Thanks to the Digitaltut team and the valuable comments shared here.

There were a few new questions.

I wish everyone success.
EIGRP Simlet (5Q), OSPF (stub), IPv6 OSPF Virtual Link

Two Drag&Drop (Frame Relay ABCD) and (Group radius, group tacacs+, if-authenticated, krb5-instance, local, none)

Question 116 (F/R Drag Drop)

The questions I remember are the same as the following questions.
Question 9
After you review the output of the command show ipv6 interface brief, you see that several
IPv6 addresses have the 16-bit hexadecimal value of ―FFFE‖ inserted into the address. Based
on this information, what do you conclude about these IPv6 addresses?

Question 17
A router in an EVN environment is choosing a route. Which value is given the highest
selection priority?

Question 221 (posted at Q.8 of http://www.digitaltut.com/evn-vrf-questions-2)
Which two statements about EVNs are true? (Choose two)

Which three benefits does the Cisco Easy Virtual Network provide to an enterprise network?
(Choose three)

Question 255 (posted at Q.9 of https://www.digitaltut.com/evn-vrf-questions-2)
Which values identifies VPNs in an EVN environment?

Which LAN feature enables a default gateway to inform its end device?

Question 15
Which three statements about SNMP are true? (Choose three)

Question 43
What is the DHCP option to download TFTP info to a Cisco phone?

In SNMPv3, which security level provides encryption of the data?

Question 8
How route tags can be set? (Choose two)

The track objects in IP SLA and make sure that it is only up if all track objects are up, which
method achieves that goal?

Question 12
How to implement local authentication using a list for case insensitive usernames?

What is the range for private AS numbers?

Which two statements about the enable secret and enable password commands are true?
(Choose two)

Question 1
What does the following access list, which is applied on the external interface FastEthernet
1/0 of the perimeter router, accomplish?
router(config)#access-list 101 deny ip 10.0.0.0 0.255.255.255 any log
router (config)#access-list 101 deny ip 192.168.0.0 0.0.255.255 any log
router (config)#access-list 101 deny ip 172.16.0.0 0.15.255.255 any log
router (config)#access-list 101 permit ip any any
router (config)#interface FastEthernet 1/0
router (config-if)#ip access-group 101 in

Question 213 (posted at Q.9 of http://www.digitaltut.com/access-list)
Which access list entry checks for an ACK within a packet TCP header?

Which value does a Cisco router use as its default username for CHAP authentication?

How does an IOS router process a packet that should be switched by Cisco Express Forwarding without an FIB entry?

Refer to the exhibit. After configuring GRE between two routers running EIGRP that are connected to each other via a WAN link, a network engineer notices that the two routers cannot establish the GRE tunnel to begin the exchange of routing updates. What is the reason for this?

Which Cisco VPN technology uses AAA to implement group policies and authorization and is also used for the XAUTH authentication method?

Which two statements about NTP operation are true? (Choose two.)

Which feature can automatically assign IP addresses in a PPPoE environment?

Question 73
Which two phases of DMVPN allow the spoke site to create dynamic tunnels to one other?
(Choose two)

Question 113
Which two areas does OSPF send a summary route by default ? (Choose two)

Question 150
Which two EIGRP metrics have nonzero K values by default? (Choose two)

Question 151
Refer to the exhibit. You want router R1 to perform unequal-cost routing to the
192.168.10.0/24 network. What is the smallest EIGRP variance value that you can configure
on R1 to achieve this result?

Question 70
DHCPv6 can obtain configuration parameters from a server through rapid two-way message
exchange. Which two steps are involved in this process? (Choose two)

Question 34
Refer to the exhibit.
hostname R1
!
ip vrf Yellow
rd 100:1
!
interface Serial0/0
ip vrf forwarding Yellow
ip address 209.165.202.129 255.255.255.224
!
ip route 209.165.202.129 255.255.255.224
null0
!
router eigrp 100
address-family ipv4 vrf Yellow
network 209.165.202.129 0.0.0.0
no auto-summary
autonomous-system 100
redistribute static
hostname R2
!
ip vrf Yellow
rd 100:1
!
interface Serial0/0
ip vrf forwarding Yellow
ip address 209.165.202.130
255.255.255.224
!
router eigrp 100
address-family ipv4 vrf Yellow
network 209.165.202.130 0.0.0.0
no auto-summary
autonomous-system 100
A senior network engineer tries to propagate a summary route 209.165.201.0/27 to R2 by
redistributing static route on R1, but setup is not working. What is the issue with the
configuration in the exhibit.

Which version or versions of NetFlow support MPLS?

Which two commands would be used to troubleshoot high memory usage for a process?
(Choose two)

Question 204
Which statement about conditional debugging is true?

Question 124
How big is the smallest packet that will always be fragmented on a standard Ethernet network
with default configuration?

Question 28
Which two statements are differences between AAA with TACACS+ and AAA with
RADIUS? (Choose two)

Question 32
A network engineer wants to implement an SNMP notification process for host machines
using the strongest security available. Which command accomplishes this task?

Question 42
A network engineer is enabling conditional debugging and execute two commands: debug
condition interfaces serial0/0 and debug condition interfaces serial 0/1. Which debugging
output is displayed as a result?

New Question
Which of the following device determines the MSS?

nobirabe. What is the answer to the new question about MMS?

Am writing exam tomorrow.
On IPV6 OSPF Lab. Which command will i use on R1 to check if loopback address of R4 is advertised on R1.
Please help

I have a Premium account valid until February 7th if someone is interested who writes me private to the attached address, (remove pipe). The price is $10

Thanks Network TUT!!!

winiton|.r|@|gmail|.com

@eng.cisco
do a show run under the interface loopback you should see it being advertised ipv6 ospf 1 area 0 (in our example but may be diff area and process id)

has anyone passed the exam lately without studying anything else?

@FOX

I don’t know. But that is possible “host”
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3650/software/release/16-9/configuration_guide/ip/b_169_ip_3650_cg/configuring_tcp_mss_adjustment.pdf

@FOX

host -> sending host

@ab thank you

@nobirabi thank you

Question 7
Which type of address does OSPFv3 use to form neighbor adjacencies and to send LSAs?
A. unicast IPv6 addresses
B. link-local addresses
C. multicast address FF02::5
D. unicast IPv4 addresses

I think it’s B, but in the dump it’s C

the answer is B and i am almost 100% the dump says it’s B

@Fox

Answer is B. Which dump are you using?