Share your ROUTE v2.0 Experience

@ Lee Thank you very much. You are the best

@Lee

Any more info about DND .. please

@TestinJan ok o will mate.
I will tell all the D&D i had on the exam. Give me few hours. I will not forget. 😊

I was in your situvation. So i know the pain. And i will help all as much as possible

Thank you @Le
My exam is on Jan.6, I hope I pass the exam. thanks

@Lee

I have exam tomorrow .. few hours will be late for me .. please try your best to explore your knowledge here as much as you can .. many Thank s

Another question i remembered!

– they gave random numbers and ask to select bgp private number whichi didnt see in the dump. Select only one.
The answer i select was 65000

These are the some questions i got in the exam!

https://drive.google.com/file/d/1gF92H5BKEpcpDLF9qU0CL3UAIHO4hWSE/view?usp=sharing

@Le, I appreciate your Help!!

Just back from the test center. It was preatty easy actually . OSPF sim, OSPF virtual link, EIGRP EVE . I got this question too about the bgp private ASN and the correct answer is : 64512 to 65535 . See you on TSHOT guys !

I try to upload the exam questions and upload it here. Digital tut doesnt let it.

@Kikimora, how many new questions?

@Le, can you send it to wagalmpau @ yahoo .com .br?

@le
can you upload it to some drive and share the link. We all appreciate the help you’re doing.. thanks!

hello

anybody has idea about the answer of bellow question

What would you configure on SNMPv3 to allow authentication and encryption?
A. authpriv
B. authnopriv
C. noauthnopriv
D. authmember
Correct Answer: B

I searched a lot and all dumps say that the correct answer is B but according to the bellow explanation in the cisco website, in my opinion, the correct answer should be A

any Idea ????????

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/snmp/configuration/xe-3se/3850/snmp-xe-3se-3850-book/nm-snmp-snmpv3.html#GUID-55D2B06F-840B-4F6B-840E-89A27E6DC269

From the Oct dump. Not seeing that version of the question.
Question 50
In SNMPv3, which security level provides encryption of the data?
A. authMember B. noAuthNoPriv C. authNoPriv D. authPriv
Answer: D
Explanation
+ noAuthNoPriv – Security level that does not provide authentication or encryption. + authNoPriv – Security level that provides authentication but does not provide encryption. + authPriv – Security level that provides both authentication and encryption.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/configuration/guide/cli_rel_4_0_1a/CLIConfigurationGuide/sm_snmp.html

@le
can you send it to chandu . shruthi252 @ gmail . c o m please

@wiliam

AuthPriv

took the test today and failed :(

will try again as soon as i can does any one have the dumps?
please send it to goddeerdog @ gmail . c o m

Also i had the eigrp eval , ospf vitual and ospf sim

only 1 drag and drops AAA

Ok i will try guys. As we can see they give the questions randomly. Because i didnt got those above questions.

64512 to 65535 is NOT the private ASN 64512 – 65534 is this is in the actually white paper 65535 is a reserved address

https://en.wikipedia.org/wiki/Autonomous_system_(Internet)

https://tools.ietf.org/html/rfc6996

private ASN and the correct answer is : 64512 to 65535

this is incorrect 65535 is a reserved address google it 64512 to 65534 is correct

These are the some questions i got in the exam!

https://drive.google.com/file/d/1gF92H5BKEpcpDLF9qU0CL3UAIHO4hWSE/view?usp=sharing

But dont depend on this guys. Try stuying all. I didnt get any AAA questions and had about 6 D&D
.
.
.
Good luck guys 💪💯

@Anonymous
answer is A authpriv stands for authentication and private

@sadboi

You can find the link to the dumps on the FAQs & Tips tab here. Check for media share link.

You can also let us know what questions you encountered in the exam.

@ Burns I would go with what Cisco prints 65112-65535.

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_bgp/configuration/15-mt/irg-15-mt-book/irg-remove-as.html

@ Anonymous . Answer is A
B. does authentication but not encryption
C. does not do neither authentication nor encryption
D. Is just wrong LOL

@CableGuy both cbt nuggets and pluralsight train to say its 64512 – 65534

65535 is a reserved address

It seems 65,534 is not an answer option on the ROUTE exam. Would Cisco really include both 65,535 and 65,534 as possible answers?

Hi Le

Will you still have a premium digitaltut account? since mine expired and ago the test for day 9.

I still need to study even more questions.

Hi @Le

Will you still have a premium digitaltut account? since mine expired and ago the test for day 9.

I still need to study even more questions.

Hi guys,
I am from Canada & i passed 300-101 exam question from here w w w .exam4lead.com/cisco/300-101-dumps.html
Copy and paste

Which configuration parameter is invalid when configuring Unicast Reverse Path Forwarding?
A. allow default route
B. allow based on ACL math
C. allow self ping to router
D. source reachable via both
Correct Answer: C

looks like all the options are valid. Any idea?

in the ospf should the command not include network 192.168.4.72.4 area 0 on armani also?

Amani#configure terminal
Amani(config)#router ospf 1
Amani(config-router)#network 192.168.4.4 0.0.0.3 area 1
Amani(config-router)#area 1 stub no-summary
Amani(config-router)#network 192.168.4.72.4 area 0

Sorry network 192.168.4.72.4 0.0.0.3 area 0

I passed yesterday , all dumps available here are valid … go through dumps carefully .. few new questions .. harldy 3 -4 .. not more .. I had 3 Sims ,, one eighrp evalution , one virtual link and one Ospf sim … wasnt hard though I wasnt sure I will pass it .. but once bridge came I crossed it easily ..

@testinJan
was ospf sim same as here pn the middle router do you add the network 192.168.4.72.4 0.0.0.3 area 0 within process id 1?

@Burns
No the Area 2 network should not be included. Use the appropriate mask to only include the serial ports for Area 1. Below this will include .5 and .6 as usables with .4 the network and .7 the broadcast
network 192.168.4.4 0.0.0.3 area 1

@Le
Please send what you found from your exam, sounds like a new lab. Trying to get Route and Switch exams done before the 2/23 deadline.

switch010101 at gmail(com)

@anonymous
Which configuration parameter is invalid when configuring Unicast Reverse Path Forwarding?
A. allow default route
B. allow based on ACL math
C. allow self ping to router
D. source reachable via both
Correct Answer: C

i think answer C is correct because when you configure the uRPF the router should be able to reach the source through the interface it came in via default route or a static route..

@anonymous @Cody

Which configuration parameter is invalid when configuring Unicast Reverse Path Forwarding?
A. allow default route
B. allow based on ACL math
C. allow self ping to router
D. source reachable via both
Correct Answer: D

the question mean what cannot be enter during Unicast Reverse Path Forwarding configuration on a router. there is not an option for source reachable via both.

so the correct answer is D: source reachable via both

just get into a router and type:

R1(config-if)#ip verify unicast source reachable-via any ?
A standard IP access list number
A standard IP expanded access list number
allow-default Allow default route to match when checking source address
allow-self-ping Allow router to ping itself (opens vulnerability in
verification)

or

R1(config-if)#ip verify unicast source reachable-via rx ?
A standard IP access list number
A standard IP expanded access list number
allow-default Allow default route to match when checking source address
allow-self-ping Allow router to ping itself (opens vulnerability in
verification)

as you can see the Options A. allow default route B. allow based on ACL math C. allow self ping to router — Are Valid Options.

hope this help

@Burns

OSPF sim was same. iD83 was given ..nothing was new in sims .. just go through all sims here in the website .. 2-4 new questions were there but if you are all OK with sims n dnd then shouldnt be problem .. one DND was new .. I didnt see that one here on plateform

@TestinJa

did you train all Sims or just the ones that came up for other people?

Can anyone please advise if it’s enough to just revise the most popular questions or is it better to learn all the questions for the exam?

@Anon –> Mate it’d would be better if you through all the MPQs,NUQ5,NUQ6 and sims. There are different questions covered in all the topics and it only prepares you better for the exam because you never know.

Hello:
Could you please write down what you have had for labs in the exam? Thanks!

hi gays i hop from all the help i want last dump viled thanks my dears my mail (gadorashaker)(@)(gmail.com)

Please can anyone help me to find 300-101 dumps (894q)?????

Hi All,
Just passed CCNP Routing 300-101!!!!

I’ve observed that there are so many new questions. I counted them it was 10-15 new q’s.
New questions were about: dynamic NAT, IPv6 multicast address, frame relay, EVN,DHCP option, AAA’s
Please study hard. You should know the all concepts.

LABS: OSPF sim, OSPFv3 virtual link, EIGRP Eval
D&D’s : Frame relay, NAT 64 and NPTv6, NAT Process (Step 1 to 4)

What I’ve studied are Oct 2019 dumps,NUQ5, NUQ6 and all the materials here in digital tut.

Thanks guys!

hi Friends. what is NUQ5 NUQ 6? please expalin for men

Hi friend please sent 300-101 dump 894Q my mail (aloneviva)(@)(gmail.com)