Share your ROUTE v2.0 Experience

@Okello, the correct answer is B. Since it has no loopback interface, it’s going to chose the highest IP address as the RID.

Correct answer ==> B

page 77 78 and 79 bro

@LR can you tell me which questions are wrong according to you in Dexter dump. Wihout providing the question no one can help you.

@LR
This is the OSPF eval SIM, if I am not mistaken.
Of course it depends on to the actual lab. You can check the interfaces using the sh ip opsf interface command. If you can see that the R1-R3 link is a NON_BROADCAST network, then the correct answer is A. Neighbour command is required to send unicast hello messages.
You can use the same command to check the timers between R2 and R3.
By the way, R2-R3 link was point-to-point on my exam, so the correct answer for me was A.

SIMs:PBR, OSPF Config, OSPF Evaluation, EIGRP Evaluation, Redistribution

Can someone help me with questions ? In dumps we have only explanation and its tough to trace question and relate explanation with them

What page is Lunchis info on?

Nvm found it. Thanks yamichan

Hi Dexter,

Can you please share a link for the latest (Dexter Dump) CCNP-Route dump here please. I have booked date in end of January. Really need it urgently.

Thank you.

Hi Rani

without studying why you booked exam:)

Dears,
I don’t have GNS3 for labs practice, is it worth to have a membership with diditaltut.com for practicing labs?
Or i can practice on Packet Tracer ?
Thanks in advance.

hello every one need dump 300-101

Hi can anyone share the latest dump tnx.
Thanks in advance..
w a r s r a t s 1 2 @ g m a i l . c o m

Hi could someone share the latest CCNP-route dump please
my email is {email not allowed}

Hi Saim
Unable to access your shared goole drive, would you be able to re-check it please.

Thanks.

can any body guide me which video training are good for this route exam and what are the good stragedies to pass exam

@Rani

Hi Rani, Yes I can copy paste link here, but comon man, is it so dificult to read coments on this page and find link ?!?

Any one has GNS3 TSHoot lab for practice for 300-135 Exam?

@ Dexter,

Thank you for the response. I did see the link up in the comment. However, Requested from you thinking that you must have latest and greatest with all the changes and updates. If there is no updates and you think that link above is OK, i will down load that. Thanks again.

I passed my exam last week score 8**

SIMs:PBR, OSPF Config, OSPF Evaluation, EIGRP Evaluation, Redistribution.
D&D: AAA, IPv6, FR, Loose/Strict

I used the dumps on digital tut and paid for membership so as to access the evaluation
# if you dont mind $12 a month to pass

New questions

whats the default value for pppoe configuration…. bla bla

a.pap
b.chap
c.ppoe
d.router’s host name

othewise the rest of questions were from the dumps.
Although I think some of the answer MAY be wrong!
So do your homework on the questions as you study.(Just to make sure)

Hi Guys, I passed today. I did not do well in the exam, no sleep and was too excited. I got 89*. I have compiled a dumb of exact 48 questions :) As a way of giving back to the forum. I will post it soon. Thanks, Digitaltut, dexter, procyber, lunchi, rob21, who helped me here. I will see you guys in TSHOOT. I thank God for this success above all. Also, if anyone needs help, I am always available, it will help me keep my knowledge fresh. Best Regards!

Hi Dexter, Rod21, Procyer,Saim

Hi could someone share the latest CCNP-route dump please
my email is {dipen$$6085$$@gmail.com}

Thanks.

hello h

Guys in Dexter’s pdf I cannot see DND images completely? Does anyone have DND questions with proper format?

Hi can anyone share the latest dump tnx.
Thanks in advance..
l a h i r u h e w a g e @ g m a i l . c o m

Passed today with 9xx/1000 tahnks digitaltut for the support provided.
I studied all the official guide for 300-101, for dumps used DEXTER,470Q, no new questions in exam
DD were AAA,URPF,FRIPV6TRAFFIC FILTER and one more i dont remember
For LAB SIMS OSPF,EIGRP EVAL,PBR,REDIST
There are few things I am worried

For VPN section I got 67% which I did well and in the OSPF evaluation lab in topology it shows a seperate set of links to R3-R1 and R3-R2 when I checked config. So for that question regarding serial links of R3 I answered acording to the topology but theere is aother answer according to the config. I have no idea so I put a comment as well.

Use DEXTER and this website….

I just pass it today guys!!!! Yeay!!!
I should be now eligible as a CCNP Routting&Switching.
But somehow, the CCNP ROUTE 300-101 exam status in my PearsonVUE profile is still “Scheduled” instead of “Pass”.

It make me anxious because tomorrow is the last day my CCNP SWITCH will expired :-/

Anyway, it’s really worth it to register as Premium Member guys! It’s all 9tut, certprepare, digitaltut, networktut. The subscription fee is really cheap, and assume it as “Thanks Gift” to the website author to make the exam preparation so precisely accurate.

So, next?? Let’s go for the CCIE R&S guys!!!

Anyone have dumps for the new CCNA CyberOps? I am willing to pay at cheap price.

Passed the exam today 8xx/1000 , Labs: PBR,Eigrp ospf redistribution,Ospf sim,ospf evu,eigrp evu, D&Ds, a loooot of multiple qustions, thank you Dexter!!!!

@LR

congratulations ! not sure how long it is going to take for you to compiled all the questions but hop you can do it before 17th jan..

I am still confused in below

Q2: Which of the following statements is true about the serial links that terminate in R3?

Answer is: A. The R1-R3 link needs the neighbor command for the adjacency to stay up

While Digital Tut Answer is: B. The R2-R3 link OSPF timer values are 30, 120, 120

thanks

Does anyone know where to find the 470q in pdf?

@ichi, I have that file. I can send it if you share your email. thanks

Hi Okello, would you be able to email me the 4701 pdf please
my email is ttciscohelp AT yahoo.com
Thanks is advance.

Exam Passed 12-01 with 84x. Thank you.-

may people tried this and pass with very high score

Thank you for your comments guys, really appreciate.

Dear All, Please tell me whether is there any website like “9TUT” for MICROSOFT Exams? Please Help Me!!!

@Nirvan
answer is The R2-R3 link OSPF timer values are 30, 120, 120

LR – congrats, when will you post your compiled list?

Hi Guys.
someone help me with latest Route dumps
Am scheduled to sit for exams soon CCNP Route. 300-101
Please Please HELP

@Eng
https://drive.google.com/drive/folders/0B-ob6L_QjGLpZEE0S2YxR3ZMUWs

Hi all when save labs Redistribution can not save . This mean wrong lab grade or not

hi guys I’m going to take the exam next month and making exercises with dexter dump, i found some answer that in my opinion are not correct. let me know what you think

Which two commands configure on a DMVPN hub to enable phase 3? (Choose two)
A. ip nhrp interest
B. ip nhrp redirect
C. ip nhrp shortcut
D. ip network id
E. ip nhrp map
F. ip redirects

BC ( In my opinion are “DE” )

Other than a working EIGRP configuration, which option must be the same on all routers for EIGRP authentication key rollover to work correctly?

A. SMTP
B. SNMP
C. Passwords
D. Time

C ( in my opinion is “D” )

btw thx dexter for provide us the dumps and the great help ;)

HI LR,

you and the other team are really doing a great job, I’m inspired to share as well after my exam on Friday, its an honour to share this space with guys like you dexter, procyber, LR and the others I didn’t mentioned you have no idea how we appreciate your work guys.
thank you for all this.

Hi LR,

have you shared the questions you meant to compile by any change? if so please email me on khudu121>at<gmail.com

@ FifaPlayer
I believe that the answer for this question:
“Which two commands configure on a DMVPN hub to enable phase 3? (Choose two) ” is correct from dexter dumps.
Take a look this link: http://blog.ine.com/2008/12/23/dmvpn-phase-3/

Dexter matey I’m telling you YOU ARE THE MAN!!! :) Stay blessed.

@FifaPlayer

Please share the latest Dexter dump PDF. My exam is scheduled at end of Feb. I appreciate your support.

@AAA please do read the comments above in the string :)

Dexter’s material: https://mega.nz/#F!tNtkSB5A!4Glpa9BrYDbAcAPsbtmDjA

Happy preparations and good luck

Hi Dexter

could you please help me with questions to the Labs. Its very confusing, as there are only answers and explanation and no questions.

SIMs:PBR, OSPF Config, OSPF Evaluation, EIGRP Evaluation, Redistribution

Can someone help me with the Lab questions please? In dumps we have only explanations and no questions.

I passed the Route 300-101 exam this morning.

All material from Digitaltut and Dexter is confirmed. Don’t just memorize but learn from the explanations.

Premium membership to Digitaltut is great because there are flash labs that you have access to as well.

The the only thing in the OSPF lab that was different was the City names, OSPF area, process id and IPs.

Passed on Monday 15th. studied from official Cisco book and then found this page. Everything on exam I seen on digitaltut or posted in links above in comments. Great page and forum. Good luck to everyone. Only strange thing – ospf lab, topology and configuration does not match – link between r1-r3-r2 mixed up serial interfaces.