Share your ROUTE v2.0 Experience

m just studying Part5,Part6,Lab sim and DnD.Can anyone confirm if it’s enough to pass the exam as i don’t have enough time to study all the questions in Oct dump.I’m a premium member and only 3 days left for exam.

I am going in tomorrow, is there a slightest possibility that the labs could change other than those three mentioned here?
Please let me know if there is anything i can do last minute
I will share what’s popup tomorrow.

HI All,
Can you confirm what is the correct answers for below..Appreicate much your help..

1.Which condition prevents the establishment of a DMVPN tunnel between two spokes?
A. The two spokes have different tunnel keepalive settings
B. HSRP is enabled on the spoke devices
C. IPSec is enabled on the spoke devices
D. The two spokes are behind different PAT devices

2.Which task must you perform to enable a point-to-point Frame Relay connection?
A. Enable inverse ARP.
B. Configure the encapsulation type.
C. Configure static address mapping.
D. Disable inverse ARP.

3.Which value determines the amount of traffic that a network path can hold in transit?
A. route cache setting
B. maximum window size
C. bandwidth delay product
D. MSS

4.A network engineer is enabling RIPng on a new customer link. Under which configuration
mode is RIPng enabled?
A. Global
B. Router
C. Interface
D. IPv6

5.OSPF has R1 router ID 172.18.1.1. What happens when R1 configure with a new loopback
interface IP address 172.17.1.1?
A. OSPF chooses 172.17.1.1 as new router ID when R1 is rebooted.
B. OSPF chooses 192.168.21.0 as new router ID when apply new configuration.
C. OSPF chooses 172.17.1.1 as new router ID when apply new configuration.
D. OSPF retains 172.18.1.1 as router ID until interface on which is configured goes down

6.Which adverse circumstance can the TTL feature prevent?
A. routing loops
B. DoS attacks
C. link saturation
D. CAM table overload

t Ann
1 D
2 C
3 C
4 A or B
5 D
6 B

@Ann @CCNP

for bellow question, I think the correct answer is A not B

6.Which adverse circumstance can the TTL feature prevent?
A. routing loops
B. DoS attacks
C. link saturation
D. CAM table overload

does anybody knows the correct answer for this question C or D ?

I saw different answers in different dumps

You are configuring a Microsoft client to call a PPP server using CHAP. Only the client will be authenticated, but the client’s password has expired and must be changed. Which PPP server configuration allows the call to be completed?
A. ppp authentication chap callin
B. ppp authentication chap
C. ppp authentication ms-chap-v2
D. ppp authentication ms-chap-v2 callin
E. ppp authentication ms-chap callin

@ccnp and @william..thank you so much :)

Passed today (12/27)

I saw some new questions, aside from that all of the questions are here.

Lab:
– IPv6 OSPF Virtual Link Sim
– OSPF Sim
– EIGRP Evaluation Sim

****The wrongly or poorly presented option for this question is one of the choices which says like>> Enable secret and Enable password overrides Enable Password —>> The correct option that is on the exam is Enable password and Enable Secret must be used together. ***

—->> I am referring to the Dumps when i say poorly presented on

Hello, I need Route (300-101) dumps, if yall need switch dumps I have too, valid I tooke yesterday exam Score: 840.
Mail me: aks 281070 @ gmail . com

Hello All!
Passed ROUTE! All is valid here. Study MPQ, NUQ5/6, side questions and quizes.
Read also Cisco press (CCNP/CCIE cert guides).
Couple new questions but no problems if you know the concept

What is right answer of this question . please

Which of the following device determines the MSS?
A. Recieving host
B. Receiving host’s gateway
C. Sending host
D. Sending host’s gateway

Hi TestinJan,
Sending host determines MSS

i think the right answer is A, Recieving Host
Each side of a TCP connection reports its MSS value to the other side, The sending host is required to limit the size of data in a single TCP segment to a value less than or equal to the MSS reported by the receiving host.

Did my third attempt today, finally passed. This attempt was horrible too. Not trying to scare anybody but I had like 25+, maybe 30 new questions. I don’t mean reworded either, I mean new. My other two exam attempts this month had 80% of the questions on them, but this one.. nope.

Maybe I only got that many new ones due to it being my 3rd attempt. Really curious where those questions came from though cause I hadn’t seen them in the dumps or the premium side bar. I’ll try to remember what some of them were but there’s too many for me to remember the exact wording of them.

If you know the concepts, you’ll obviously pass. I don’t know the concepts, I just know the answers so when they’re reworded, I can kind of guess what the answer will be, but if it’s a completely new question, it’s awful and I have to guess.

@youcef
I agree your explanation.

Any other thoughts?

anybody knows the correct answer for this question

You are configuring a Microsoft client to call a PPP server using CHAP. Only the client will be authenticated, but the client’s password has expired and must be changed. Which PPP server configuration allows the call to be completed?
A. ppp authentication chap callin
B. ppp authentication chap
C. ppp authentication ms-chap-v2
D. ppp authentication ms-chap-v2 callin
E. ppp authentication ms-chap callin
https://www.cisco.com/c/en/us/support/docs/wan/point-to-point-protocol-ppp/25647-understanding-ppp-chap.html

One-way (unidirectional) ppp authentication chap callin << A is the answer.

I’m convinced that the best way to pass the test is to know the subject matter like DMVPN, PPPOE, Frame-Relay (should be retired from this exam, its too old), RIP, OSPF, EIGRP and the v6 versions, EVN, NAT, IP SLA, access-lists and netflow. Then you should take the tests pertaining to each to ensure you know how Cisco WANTS you to know them. Lastly, you should then know the sims. on the last day, you can skim over the dumps. I think the combo of knowing the tech, the labs and the dumps (the day before the test) should help you pass like 80% of the time. If you only know a few of the technologies and most of the dumps, I think the pass rate is like 20%.

Mr iBrainDump
What about the SIMLETS? Did you get the same old one or any new sim/lab?

You are configuring a Microsoft client to call a PPP server using CHAP. Only the client will be authenticated, but the client’s password has expired and must be changed. Which PPP server configuration allows the call to be completed?
A. ppp authentication chap callin
B. ppp authentication chap
C. ppp authentication ms-chap-v2
D. ppp authentication ms-chap-v2 callin
E. ppp authentication ms-chap callin

The answer is C

Ref: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_usr_aaa/configuration/15-mt/sec-usr-aaa-15-mt-book/mschap_version_2.pdf

Which of the following device determines the MSS?
A. Receiving host
B. Receiving host’s gateway
C. Sending host
D. Sending host’s gateway

Answer: C

The value of the MSS field is determined by the MTU configuration on the host.

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-10/configuration_guide/ip/b_1610_ip_9300_cg/configuring_tcp_mss_adjustment.html

Yeah all 3 attempts I got eigrp eval, ospf sim, and ipv6 ospf sim.Know them well because failing one of them could cost you the exam like one of my attempts did.

@ Anonymous

You are configuring a Microsoft client to call a PPP server using CHAP. Only the client will be authenticated, but the client’s password has expired and must be changed. Which PPP server configuration allows the call to be completed?
A. ppp authentication chap callin
B. ppp autherwntication chap
C. ppp authentication ms-chap-v2
D. ppp authentication ms-chap-v2 callin
E. ppp authentication ms-chap callin

The Answer is D , because only the client will be authenticated , so that is unidirectional authentication and you need te callin keyword in the command.

I took exam today December 28, 8:30AM and I passed, with not so high score. Thanks to this website. To God be the Glory.

LAB : EIGRP Evaluation Simulator – OSPF Simulator – IPv6 OSPF Virtual Link Simulator
DND : IPv6 NAT – Drag and drop the challenge Handshake Authentication Protocol – statements about device security (CoPP – MPP) – adverse network conditions

Please take note the ip address they changed.

Study all the Resources Links :

Most Popular Questions
New Updated Questions – Part 5
New Updated Questions – Part 6
Composite Quizzes,

Don,t exhaust yourself, take a break and rest then study.
Lastly Pray

Which of the following device determines the MSS?
A. Receiving host
B. Receiving host’s gateway
C. Sending host
D. Sending host’s gateway

Answer: C

The value of the MSS field is determined by the MTU configuration on the host.

https://tools.ietf.org/html/rfc879 – search for negotiation in the article

Please provide latest dump for ccnp route exam, i am taking exam next week

janvipatel0226 at gmail dot com

thank you.

Hi all,

How difficult do you all think the new CCNPs will be after Feb 2020? I’d like to take the ENCORE and maybe the Automation one.

Will it be harder for sites like this to get questions since there will be many CCNP tracks?

You are configuring a Microsoft client to call a PPP server using CHAP. Only the client will be authenticated, but the clteient’s password has expired and must be changed. Which PPP server configuration allows the call to be completed?
A. ppp authentication chap callin
B. ppp authentication chap
C. ppp authentication ms-chap-v2
D. ppp authentication ms-chap-v2 callin
E. ppp authentication ms-chap callin

I think the answer is A. Definitely if we want unidirectional authentication we need the word CALLIN. So it has to be A, D or E. If we want CHAP it should be A (chap), am I missing some reason why it should be ms-chap-c2 or ms-chap?

hi guys, I passed my test on last Fri, got 9xx markes.
4 new questions I got, I remember only 2:
– protocols affected by MPP (the answers from this site were not presented in my tests), I chose the Telnet and HTTPS;
– multicast address for ipv6.
4 D&D.
Labs – OSPF sim, OSPF virtual-links, EIGRP Evaluation Sim, EIGRP Stub Sim (show eigrp 1 topology worked there instead of show eigrp topology).
And I agree with other guys, if you know the concept of all routing protocols, you can pass this test.
Good luck to all.

@Bill 4 Sims?

Passed on 27/ Dec with 888. Oct dump is still valid.( 80-85%).
3 labs : Ospf sim ( area 7, process 2, copy run start works), ospfv3 vitual-links ( copy run star, wr don’t work) is the same tut, Eigrp eva is the same.
3 D&D: I don’t remember all, the one is configure Frame relay multipoint.
About 4 new questions.
1) command to advertise a network into backbone area process 5 ( chose 192.168.10.0 0.0.0.255 area 0)
2) question about MSS. Something likes where the MSS occurs ( sender’s host, sender’s gateway, receiver’s host, receiver’s gateway) .I chose sender’s gateway (?).
3) question about private BGP as ( seem similar in Oct dump but not), I chose 64512 – 65534 (?).
Sorry I can’t remember alot.
Finally, you should know the concept. If you try to remember dump, might be you’d failed.

Did they change the sims?

Hi ELNINO, How to get Oct dumps please, or send it to {email not allowed}

Hi ELINO, can you share the Oct dumps with me please

mfurmoli at yahoo

anybody knows the correct answer to this question, it has different answers in dumps
any idea

QUESTION 406
When unicast reverse path forwarding is configured on an interface, which action does the interface take first
when it receives a packet?
A. It verifies that the source has a valid CEF adjacency.
B. It checks the egress access lists.
C. It verifies a reverse path via the FIB to the source.
D. It checks the ingress access lists

anybody knows the correct answer to this question, it has different answers in dumps
any idea

QUESTION 406
When unicast reverse path forwarding is configured on an interface, which action does the interface take first
when it receives a packet?
A. It verifies that the source has a valid CEF adjacency.
B. It checks the egress access lists.
C. It verifies a reverse path via the FIB to the source.
D. It checks the ingress access lists

Hi all

completed xam with 97x, oct19 dumps are still valid only 5-10 new questions

EIGRP simlet, ospf sim, ospf virtual-link sim, 4 D&D.

thanks digitaltut and gud luck all

HI guys i weant to last dump viled please thanks my dears gadorashaker(@)(gmail)(.com)

@burns
correct

Hey @300-101
How to find oct19 dumps from digitaltut website please or kindly send it to this mail,
mfurmoli at yahoo . com

Passed with 9XX.
90% from Digitaltut. Please buy premium membership and follow below type question and flash cards. Thanks digitaltut.
Please read all the tutorial from CCNA and CCNP route where required to understand the core concept. some Exam Question may little bit different from here but if you understand the basics, you can score 900+.

you don’t need to read chinese/Japanese dump. just read everything from this site:)

Video series to understand the core concept: CBT nugget.

note: Don’t spend your time to do any LAB/DnD other than mentioned here if you are in a hurry.

=====================
Most Popular Questions
New Updated Questions – Part 5
New Updated Questions – Part 6
Composite Quizzes
=====================
Thanks Digitaltut again !!!

OCT dump is in Route FAQs&Tip tab. You can download from mediafire.

Time which Sims did you concentrate on?

Question 9
Which OSPF areas prevent LSA type 4, LSA type 5? ( choose two)
A. Not-so-stubby area
B. Total stubby area
C. Stubby area
D. Normal area
E. Backbone area
F. Not-so-stubby totally stub area

Answer: B F

isnt the answer shouldnt it be B and C

Question 9
Which OSPF areas prevent LSA type 4, LSA type 5? ( choose two)
A. Not-so-stubby area
B. Total stubby area
C. Stubby area
D. Normal area
E. Backbone area
F. Not-so-stubby totally stub area

Answer: B F

isnt the answer shouldnt it be A and C

@Simy
Stubby area, and totally stubby

stubby have areas 123
totally stubby area 1 and 2

I’m sitting for the exam on 3rd. Any questions you need to hear after the exam?

@Wili

When unicast reverse path forwarding is configured on an interface, which action does the interface take first when it receives a packet?

A. It verifies that the source has a valid CEF adjacency.
B. It checks the egress access lists.
C. It verifies a reverse path via the FIB to the source.
D. It checks the ingress access lists

Answer id D based on the order below

cisco.com/c/en/us/td/docs/ios-xml/ios/sec_data_urpf/configuration/xe-3s/asr903/16-7-1/b-sec-data-urpf-xe-16-7-asr900/unicast_reverse_path_forwarding_strict_mode.html

Before forwarding a packet that is received at the interface on which Unicast RPF and ACLs have been configured, Unicast RPF does the following checks:

1. If input ACLs are configured on the inbound interface.

2. If the packet has arrived on the best return path to the source by doing a reverse lookup in the FIB table

3.Does a lookup of the Cisco Express Forwarding table for packet forwarding.

4. Checks output ACLs on the outbound interface.

5. Forwards the packet.

@burns

good answer not sure if the other guys bother to google.

Which OSPF areas prevent LSA type 4, LSA type 5? ( choose two)
A. Not-so-stubby area
B. Total stubby area
C. Stubby area
D. Normal area
E. Backbone area
F. Not-so-stubby totally stub area

B and C

cisco.com/t5/routing/which-ospf-areas-prevent-lsa-type-4-lsa-type-5/td-p/3825302