Share your ROUTE v2.0 Experience

Anybody know the oct vce latest?

Where does the EVN marks the traffic to separate different users?

A. On the edge interface, with VNET tag
B. On the edge, with 801.Q
C. On the trunk, with VNET tag
D. On the trunk, with 802.1Q

Dum say C, but cisco say too on int trunk.

Instead of adding a new field to carry the VNET tag in a packet, the VLAN ID field in 802.1q is repurposed to carry a VNET tag. The VNET tag uses the same position in the packet as a VLAN ID. On a trunk interface, ****the packet gets re-encapsulated with a VNET tag***

Someone can provide a more concise answer???

Passed today with 8xx/1000.
ROUTE_Oct_2019.pdf from Faq is still valid.
90% of the question are from here.

lab; OSPF sim(area and ip addresses changed), Ipv6 OSPF sim(same), EIGRP eval()
D&D: AAA, CoPP/MPP, mGRE, Frame-Relay config

If you understand the concepts eveything should be fine.

@ Anonymus
It is in mediafire link which is at one of the Faqs question, i m really shocked you could not find, if you cant find provide me mail adress i will send you ermanozcan @ gmail dot com

I took the exam Friday and failed. Lots of ipv6, lmi questions and the labs were eigrp sim and ospf stub. I did not have the October pdf until today. If you have this you will be ok. Does anyone know of a VCE file to use as a route simulator for the exam?

I just went through the October PDF. And all of its questions are in the sidebar aswell.
So PDF = Most Popular Q + New Updated Questions 5 + NUQ 6 + all ‘old’ questions that you can see as a non-premium member.

assuming that October PDF is valid as some folks say, we are still golden.

passed yesterday… october dump on this site (in ROUTE FAQs & Tips section) still valid most of the questions including drag and drop were there but u have to go through the whole 445 pages, also labs are the same only different IP addresses (OSPFV3 virtual-link, OSPF stub and EIGRP evaluation), i think there was only 3 or 4 question i didn’t see in the dump… goodluck all.

Hi guys!

Somebody can post here the link to Rou_OUT? Please.

Just passed today with a 8XX score , most of the questions form this site , but you have to go over too many times and understand the concept very well.

Good luck all

passed today 8XX.
More D&D, about 9. Oct dump is still valid but i had 9 new questions.

Lab same on this site

CCNP 300-101
Hi I m happy that you pass , what is the new questions ? which labs was in the exam ?

i had 4 lab: IPv6 OSPF (different process and area), EIGRP Sim, OSPF Sim, Eigrp Stub

New questions are GRE, OSPFv3, Frame-relay component and LMO, ENV, DHCPv6 and others that don’t remeber

thanks digitaltut!!

@CCNP 300-101

please shared the new questions for us. if you remember it, please :D

How can I download the October PDF? Many thanks

Somebody have the vce of the Rou_OUT?

@ccnp 300-101 in labs only OSPF has some different parts rigth ? Eigrp stub is same

Folks,

Just recently taken exam.

Firstly IGNORE all the spammers on here advising they recently passed, and sending you to a WA link and fleecing you of your money and throwing off which Labs they had.

Labs – EIGRP EVAL – IPV6 Virtual Sim – OSPF SIM

90% of the October PDF is valid.

Very little IPv6. I had a DnD which I have not seen regarding AAA. Had things like Command, Exec etc.

Not only go through the Most Popular Questions and the Composites within that, go into the separate Composites and understand those as well and then the PDF. You must understand the concepts behind it.

Good Luck to all.

@alliswell – Thanks for that.

There is a drag n drop buried in the PDF for AAA. Is this the one:
+ Auth-proxy: It returns information about hosts using proxy service
+ Commands: It returns information about individual EXEC commands and permissions associated with a privilege level
+ Connection: It returns information about outbound communications from the network access server
+ Exec: It returns information about user EXEC terminal sessions with the network access server
+ Network: It returns information about SLIP, PPP and ARA sessions
+ Resources: It returns information about calls that have passed and failed user authentication

@twitchy – That’s the one….

@alliswell
labs are same or are there some differences ?

@erman

EIGRP Eval SIM was identical

OSPF SIM – IP address and Area had changed

IPV6 – Identical

But learn the concept behind it. Just then substitute the Area and IP’s….(fairly simple)

Tks @alliswell

hey guys, what is the october PDF?
i’m a premium member and i study the question of : MPQ+ new update 5 and 6

@murder there are 445 pages in OCT dump , you can find at FAQs page

For the Eigrp eval lab – As this command can only be used in this lab show ip eigrp 1 topology, not real world. Surely this a trigger for cisco to know you have used this site. How else are you guys finding the answer without using that command.

Hi Guys,

You can found All (Route) Drag n Drop Qs/As here
filebin(.)net(/)sxceqkkjunt0r6sr >>> remove ()

@ theraka
thanks

Hello every one the DUMP still valide I passed my CCNP 300-101 exam yesterday.

@Passed
hi how many different questions from dump ?

Everybody who is testing today, please remember atleast one new question from your test

Mr iBrainDump, you promise to post new questions, which you met in your exam.

Mr iBrainDump you supposed to passed already , tell us about new questions please

Could you share valid dumps ?

I just passed exam 300-101 with 925, mainly questions were from digitaltut. But you should study all of topics. My exam had a lot of drag and drop questions

anyone who refer you to a whats app group is fake user , they ask 200 $$$ for route dumps only !!!!
DO NOT WASTE YOUR TIME

@parvin , any out of dump questions you remember ?

@parvin
Congratulations!! if you follow any dump please send me via saniyahsameen @ gmail . com

Please help to share the dumps to brindavansrinivas007 @ gmail . com

Took the exam today, and passed 875.

My study materials is CBT Nuggets videos, Chris Bryant videos, and Youtube (of course). However, for the dumps I just use this website, nothing more. During the exam I had an OSPF Simulator, be careful of the IP addressing, read the requirements CAREFULLY, such as OSPF process ID as they changed it. I also had the IPv6 OSPF virtual link, still same here. One thing to note, “wr” and “copy run start” did not work AT ALL during the exam. I was really frustrated as I cannot fail on that troubleshooting/simulation coz there are a lot of new questions. But I didn’t have a choice coz I cannot save the config, so I hit NEXT. But I guess it wasn’t part of the requirement coz I still passed.

For the new questions, I will try to remember coz there are more than 5 questions. You just need to focus on the questions, otherwise just hope for the best. One question I can remember is, “If MPP is enabled, which of these protocols wiill be affected?” Something like this. Choices below. The others are a bit hard to remember, and there is also one that they modify regarding LSA 1,2 7 and 3 (default route only).

– VTP
– OSPF
– HTTP
– BGP
– FPT

So, good luck!

yesterday I passed exam with 9XX

Some new questions, I don’t remember exactly how many, but I calculate between 5 – 10.

Many DD >> 5 – 7, the rest of Digitaltut.

Between 5 – 10 new questions.

Changes in LABS: Unimportant (only number process OSPF and IPs).

**Read carefully the statements of the LABs** command wr and copy run star DO NOT WORK, then perform connectivity tests, that’s what will validate the LAB.

Anyway understand the concepts, it’s the most important thing, understanding concepts has helped me answer new questions.

Thanks Digitaltut!

digitaltut.com – it’s time to make NUQ Part 7 Dec PDF

Hello guys,
do you know what is the right answer for this? as i understand it is B but the answer in 9 tut is C

Question 8
By default what is the maximum number of equal metric path BGP uses for load balancing?
A. 4
B. 6
C. 8
D. 16

Hi all, just failed exam, almost passed!!!

There are a few new questions (sorry I cannot remember them, if I come accross them again Ill post them here) god I hate cisco exams, they should just be lab based and a few MCQ, its ridiculous!!

Can anyone tell me where can i find a good testking to buy it?

regards !

A network engineer execute show ip cache flow command. Which two types of information are displayed in the report that is generated?
A. flow export statistics
B. SMLS flow traffic
C. flow samples for specific protocols
D. top talkers
E. IP packet distributions

Answer: AC or CD

@guy who made an 875. The answer to the question about if MPP is enabled is HTTP and FTP.

@erman Most of the questions I got were in the route oct pdf. If you know those you should pass I believe. I had like 40 from there.

Passed Today,

About 5-6 New questions

9DND Urpf loose/stric mode, ACL(dinamic,extended,reflexive), Ipv6TrafficFilter/accessclass, frame relay, AAA, GRE

Lab SIM ospf sim (diferrent process id, ips) , ospf ipv6 virtual link, EIGRP Evaluation Sim.

-A new question about DHCP relay agent about send dhcp discover to primary and secondary interfaces, when the DHCP server doesn´t respond.

-Other question: The exhibit on MPQ Question 17 (Ips Changed)

Q:What is the output of the command “show ip route”, when the router BR1 is configure as STUB.

@ Mr iBrainDump

thanks bro for sharing! means i got it wrong :D, I chose BGP and OSPF. ouch!

Passed the exam today with 8XX some time back.Surprisingly had only one D&D.
-EIGRP SIM
-OSPF IPV6 and OSPF lab
Rest all where questions from Digital TUT or OCT_PDF.