Share your ROUTE v2.0 Experience
| Note: The last day to take this ROUTE 300-101 exam is February 23, 2020. After this day you have to take new Enterprise exams to get new CCNP Enterprise certification. If you want to find out more about the new exams please visit here. |
The ROUTE 300-101 (ROUTE v2.0) exam has been used to replace the old ROUTE 642-902 exam so this article is devoted for candidates who took this exam sharing their experience.
Please tell with us what are your materials, the way you learned, your feeling and experience after taking the ROUTE v2.0 exam… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note: Posting email is not allowed in the comment section.
Your posts are warmly welcome!
@erman
checked the Oct dumps, i had 9 DDs, most i had so far. lots of EVN questions too(around 5-6)
6-8 new questions. see below. sorry couldn’t remember the rest…
– DHCP relay with secondary address – if primary fails after a number of tries, it will go to the secondary, if the secondary fails, it will go to the next secondary
– what commands are used to configure GRE with IP Sec, something like this, choices have mtu, mss, etc…
@mBGP
for dhcp relay , router will send both devices and take from both devices , for gre with ipsec I think there should be answers inculding some security features isakamp etc
sure feel free to pick “router will send both devices”
If the ip dhcp smart-relay command is configured, the relay agent counts the number of times the client retries sending a request to the DHCP server when there is no DHCPOFFER message from the DHCP server. After three retries, the relay agent sets the gateway address to the secondary address. If the DHCP server still does not respond after three more retries, then the next secondary address is used as the gateway address.
Today i failed. Most of questions are from 9tut as for labs they are from site but with different ts activity. I had questions for Netflow 9 features. Lot of evp lot of snmp questions null of bgp eigrp and ospf also lot. Sim and lab eigrp eval,Ospf vl with ipv6 adr, ospf ts eigrp simlet. Please if someone can share new q5 an q6 point me to them as i plan to retake exam very soon.
kindly please share me ccnp route latest dumps
n e h a m a h a t o 2 2 2 @ g m a i l . c o m
Please share the vce / pdf file to {email not allowed}. Thank you very much.
Please share the vce / pdf file to toanphan0180 @ gmail . com . Thank you very much
2 DHCP servers are configure . Waht will the action when ip helper gets a discover packet from client.
1. 2 broadcast requests will wefdsent to both DHCP servers.
2. If primary fails then request will be sent to 2 nd DHCP server.
3. both servers will reply back with IP or something like this.
Does anyone know the answer.
I think both DHCP will get the request
what are the latest laps that has been coming this week ?
yesterday I took the exam and the score is 8XX
3 labs OSPFv3 and OSPF sim and EIGRP eval
not so much d&d jest frame relay serial and AAA and one another I cant remember
I saw may be 2 or 3 new Q
and all other from the most popular q and net updated 5&6
I’m a premium
I got one step left TSHOOT
thank you
Please share the vce / pdf file to deo191 @ mail . ru . Thank you very much
@ anony s please try to remind about new questions
I failed yesterday but have to say there were many hits from digital tut , I am premium here.
to be honest, i have not done ppoe topic and updated questions properly.
QUESTIONS FROM MY EXAMS WERE
1 labs – ospf virtual links
1 lab -simple ospf
2 PPOE questions -ppoe packets types ( PADO , PIDO…)
2 questions on tacacs + one of them was a drag and drop
1 eigrp question – VRF yellow –
As for the research, I have freaking paid and downloaded exams from pass4sure and http://www.examcollection.com both have 201 questions and 179 questions respectively but NONE of the questions from the real exam ( THYE ARE THIEVES ) SO I AM HERE TO STAY and try again.
@failed but, can you please try to tember which are not in dumb
Also please send me those examcollection dumps ermanozcan @ gmail dot com
Hello all, I passed today. A few new questions, but if you understand the concept shouldn’t be any problem.
DnD: IPv6 NAT, AAA, Frame Relay, SNMP, NAT64
Lab: EIGRP sim, OSPF, IPv6 OSPF
I’m a premium member, membership expires 7th Jan 20, if anyone wants to buy the membership from me, I’m willing to sell it for $10 :)
redmentor111 at gmail dot com
Hi all,
What is the difference between working on premium site vs october pdf
Hi all
Any new questions?
Passed today 9xx got 8new questions not on oct dumps
Got 2 labs IPV6 OSPF ,EIGRP REDISTRIBUTION ,EIGRP SIM ‘2 DRAG AND DROPS MOST EVN QUESTIONS NO BGP QUESTIONS KNOWING THE CONCEPTS WILL SEE YOU TRHOUGH DONT RELY ON DUMPS QUESTIONS SEEM TO CHANGE NOW AND THEN GOOOD LUCK GUYS OFF TO TSHOOT
@Traunt please try to remind the new questions
@red dont sell please, help me
crak4sure ? spam
Does it matter which names and numbers we use on the Sims? For example the route-map name, ospf, eigr, etc.
does TAB work in the exams for the labs/sims ?
Hey, and worked at my previous exams.
It doesn’t matter which name you use at the exam as long as you are persistent in your configuration.
Have my exam tomorrow… hoping for the best.
* TAB and Question-Mark worked at my previous exams.
Passed yesterday.
there was a drag and drop that i had never seen where there was icmp unreachable, icmp redirect, ttl (cant remember the rest)
other drag and drops were frame relay, frame relay extensions, copp vs mpp.
Lab were same as on this site.
I had some new questions concerning IP SLA and redistribution
GL to everyone
@Durand, well done!!!
what Labs did you get ?
@Durand
please try to remind of new questions
@Enterprise
OSPF Evaluation, EIGRP Evaluation and OSPF Sim. The OSPF sim has a different process ID and area ID.
@Durand
Sla question was like asking what is the purpose of the SLA. I dont remember the multiple choices answer. I’ll try to remember the rest after my nap.
could some one please verify if the new questions are in this dump:
freecram(dot)com/Cisco.300-101.v2019-12-02.q63.pdf
Just passed 86x/790. Had PBR and OSPF virtual-link SIM’s. Mostly MPQ, 5 and 6 batch. Few new questions. Lots of drag & drop. Digitaltut – owe u guys, my job is safe now.
@HappyGuy
please try to remember the new questions
@Please verify
link is not working
@please verify ok i checked the questions some of the wuestions are similar but there are reports on share expaerince page i mean this page some questions out of dump like multiple dhcp relay question whic is not also in freecram
Which type of Netflow information is displayed when the show ip flow export command is executed?
A. sent status and statistics
B. top talkers
C. export interface configurations
D. local status and statistics
Answer: D
A or D???
thanks
Passed today with 840
OSFPV3, OSPF AND EIGRP SIM
all the drag and drops from Premium
Go for it and you can do it.
How can we download a packet tracer or GNS exam lab files ?
I need to do itmyself before attempt the exams.
@kJ
you to each question under lab sim you can see the link of the GNS3 file to each sim.
Hello All can you help here what is the right answer to this?
Which three benefits does the Cisco Easy Virtual Network provide to an enterprise network?
(Choose three)
A. simplified Layer 3 network virtualization
B. improved shared services support
C. enhanced management, troubleshooting, and usability
D. reduced configuration and deployment time for dot1q trunking
E. increased network performance and throughput
F. decreased BGP neighbor configurations
Answer is ADE in my opinion but Dumps answer is ABC
Which two commands do you need to implement on a router to support the pppoe client?
(Choose Two)
A. peer default ipaddress pool
B. mtu
C. bba-group pppoe
D. pppoe enable group
E. pppoe-clientdialer-pool-number
Answer: BE
why not ans D is correct? any suggestion?
@Silly
I would prefer ans:ABC
A packet capture indicates that the router is not forwarding the DHCP packets that it receives on interface FastEthernet0/0. Which command needs to
be entered in global configuration mode to resolve this issue?
A. ip helper-address
B. ip DHCP relay
C. service DHCP -Answer
D. ip forward-protocol
Any idea which is correct answer
@Anonymus
A
@300-101 why do you prefer ABC for EVN asnwer?
@silly
Configuring EVN increase management scalability, we can easily Manage and tshoot different types of traffics and services. It’s may be bit difficult when all the networks are combined, like having all customer routes in one table.
What is point of increased throughput with EVN? While we have same infrastructure.
@AA
OSPF Sim was exactly the same?
What are features of ver. Netflow 9? Choose two
1.Collect egress and ingress flow
2.Collect ingress
3.Collect egress
4.Cisco proprietery
5.ietf (not sure about this)
Should be 1 and 5
Refer to the exhibit. Which statement is correct regarding the operation of NAT-PT between the IPv4 and IPv6 networks shown?
A. The router will determine the IPv4 destination address.
B. The source IPv6 host can use DNS to determine the IPv6-to-IPv4 address mapping.
C. The host is statically configured with the IPv6-to-IPv4 address mapping.
D. ICMP can be used to determine the IPv6-to-IPv4 address mapping.
Passed route 88x today and finaly im CCNP it was a all year studying and i wish good luck to all
+ network-specific stateful NAT64 prefix: IPv6 prefix assigned by an organization
+ NAT64 : supports application layer gateway
+ NPTv6 : translates 2001:1::/64 to 2001:2::/64
+ well-known stateful NAT64 prefix: supports IPv6 prefix 64:FF9B::/96
Drag and drop the steps in the NAT process for IPv4-initiated packers from the left into the correct sequence on the right.
You are configuring the R1 Serial0 interface for a multipoint connection. Drag and drop the required configuration statements from the left onto the corresponding locations from the diagram on the right.
Drag and drop the AAA features from the left onto the correct description on the right.
LAB’s–>
OSPF -> with different area ID and process ID the network ip address was changed to istead of 192.168.4.4/30 it goes to 192.168.13.4/30
OSPF IPV6 Virtual Link the same as in the DIGITUT
EIGRP EVALUATION SIM
The was like 5 or 7 questions that i never seen in DIGITUT,
Question about one PC that cannot talk to another PC because of MSS or MTU configuration
Question about how to redistribute BGP into OSPF with four possible answer including redistribute
Which two features were added in MSCHAP Version 2?
I will try to remember more new questions, But Digitut still valid gays learn all the material in the site and it will be fine too pass
Question 124
How big is the smallest packet that will always be fragmented on a standard Ethernet network with default configuration?
A. 1500 bytes
B. 1800 bytes
C. 2048 bytes
D. 2100 bytes
Shouldnt the answer be A? the dump says B