Share your ROUTE v2.0 Experience

Taking test shortly, will update.

Where i can try a valid dump? can we share a link?

Thanks

Guys never purchase from people who say remove so-so from link and get dumps.

They are total scamsters they are on all websites.

Never genuine they are.

Be careful always.

The answer is A for sure. I have checked it.

All the best

@Anon

well im not sure as link-local si used for creating/form neihborship but FF02::5 is used for sending adjenciesies …

so its a bit tricky

Just passed (900), used only this site

I am against using dump just to get certified then going into interviews and have no idea. (I have seen this first hand)

Advise: know the topics very well? Study / practice first. Then use this site to learn the tricky question.

I love this site, it provides a stage for healthy discussion that will help to understand topics even better.

@Just pass 300-101 today
What is real labs in you exam?
OSPF stub , OSPF Virtual link

How can I get the dumps that you or the oct dump? If you have the dumps can you please share it. Thanks for replaying brother.

Lio here, if u need OCT dump go to Route FAQs and Tips on the side bar u will find it just scroll.

Its big but many questions come from it. DnD and Labs full same

What are characteristics of PAP and CHAP?
A. PAP provides a challenge to the client
B. CHAP provides a challenge to the client
C. PAP can be used by TACACS+ for with
D. PAP requires a username and optional password
E. CHAP requires a username and optional password

to me it looks like 3 answers are correct
BCD

but in dumps is only BC

what do you think ?

I did my exam today and passed… the October 2019 dumps is valid.
I had 55 questions in total, 6 DND 3 labs— virtual-link, EIGRP evaluation, and OSPF stub.
there were a few new questions like 4 of them but if you are relying on dumps, master all the labs and know the DND by heart as well as the multichoice questions.

this site is very helpful… thanks Digitaltut :)
also, try to understand the concepts very well, some repeated questions were twisted :)

Good luck guys!

just in case you are looking for the link to the dumps

https://*www.me*diafire.com/file/iz5*cctgyhjt2qn1/ROU*TE_Oct_2019.pdf

remove ****

[spam_suspect][spam_point:2]Hi Anon – some answers for the Qs:

Which type of Netflow information is displayed when the show ip flow export command is executed?
A. sent status and statistics
B. top talkers
C. export interface configurations
D. local status and statistics

Answer: D

https://www.cisco.com/en/US/docs/ios/12_3t/netflow/command/reference/nfl_a1gt_ps5207_TSD_Products_Command_Reference_Chapter.html#wp1188541

show ip flow export
To display the status and the statistics for NetFlow accounting data export, including the main cache and all other enabled caches, use the show ip flow export command in user EXEC or privileged EXEC mode
——————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————

Which BGP option is required when load sharing over multiple equal-bandwidth parallel from a single CE router to a single ISP router over eBGP?

A. eBGP Multipath
B. eBGP Multihop
C. BGP Synchronization
D. Public AS numbers

Answer: A

The BGP Multipath Load Sharing for eBGP and iBGP feature allows you to configure multipath load balancing with both external BGP (eBGP) and internal BGP (iBGP) paths in Border Gateway Protocol (BGP) networks that are configured to use Multiprotocol Label Switching (MPLS) Virtual Private Networks (VPNs).

——————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————

Using new backup router in spite of faulty one in OSPF domain but relationship with neighbor in one interface only not working, what is the reason of this problem? (Choose two)

A. area ID mismatch
B. authentication mismatch
C. process id of OSPF not match
D. OSPF timers not match

Answer: Tricky, could be A, B, D

Some details on why ospf neighbours fail
https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/13699-29.html

Tested area in GNS3 and if area does not match then neighbour does not come up. Change area and neighbour comes up.

Tested authentication in GNS3 and if no match then neighbour does not come up. Change password and neighbour comes up.

Tested timers in GNS3 and if not matching then neighbour does not come up. Change and it does.

——————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————

What is the function of the snmp-server enable traps and snmp-server host 192.168.1.3 trap version 1c public commands?
A. to allow only 192.168.1.3 to access the system using the community-string public
B. to allow private communications between the router and the host.
C. to collect information about the system on a network management server
D. to disable all SNMP informs that are on the system

Correct Answer: C

——————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————

When an OSPF design is planned, which implementation can help a router not have memory
resource issues?
A. Have a backbone area (area 0) with 40 routers and use default routes to reach external
destinations.
B. Have a backbone area (area 0) with 4 routers and 30,000 external routes injected into
OSPF.
C. Have less OSPF areas to reducwde the need for interarea route summarizations.
D. Have multiple OSPF processes on each OSPF router. Example, router ospf 1, router ospf 2

Answer: A

https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/7039-1.html#t34a

It is not easy to figure out the memory needed for a particular OSPF configuration. Memory issues usually come up when too many external routes are injected in the OSPF domain. A backbone area with 40 routers and a default route to the outside world would have less memory issues compared with a backbone area with 4 routers and 33,000 external routes injected into OSPF.

Hope that helps. Let me know if you think differently.

Passed today, 9xx. Labs are the same (EIGRP SIM, OSPF Sub (different IP, ID), OSPF virtual link)
D&D – Frame relay config, AAA.
About 10 new qvestion, a lot of EVN.

I’ ve remembered:
1. NetFlow9 – supports ingress or egress flow. I answerd both.
2. MSS – whitch device determinated (receiving host, sending host, gateway). I answered receiving host
3.Router in EVN choosing a route – witch priority (VNET tag, IGP AD, default AD, something else). I answered IGP AD, but I am not sure.
4. IP auto assign in PPPoE – witch protocol (DHCP, PPP, something else). I answeder DHCP.
5.Question about prefix list/route map – there are several route-map (match ip prefix list), witch tag will be set for some network (need to check mask)

Hi Anon – some answers for the Qs:

Which type of Netflow information is displayed when the show ip flow export command is executed?A. sent status and statisticsB. top talkersC. export interface configurationsD. local status and statistics
Answer: D

https:// www. cisco. com/en/US/docs/ios/12_3t/netflow/command/reference/nfl_a1gt_ps5207_TSD_Products_Command_Reference_Chapter.html#wp1188541
show ip flow exportTo display the status and the statistics for NetFlow accounting data export, including the main cache and all other enabled caches, use the show ip flow export command in user EXEC or privileged EXEC mode——————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
Which BGP option is required when load sharing over multiple equal-bandwidth parallel from a single CE router to a single ISP router over eBGP?
A. eBGP MultipathB. eBGP MultihopC. BGP SynchronizationD. Public AS numbers
Answer: A
The BGP Multipath Load Sharing for eBGP and iBGP feature allows you to configure multipath load balancing with both external BGP (eBGP) and internal BGP (iBGP) paths in Border Gateway Protocol (BGP) networks that are configured to use Multiprotocol Label Switching (MPLS) Virtual Private Networks (VPNs).
——————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
Using new backup router in spite of faulty one in OSPF domain but relationship with neighbor in one interface only not working, what is the reason of this problem? (Choose two)
A. area ID mismatchB. authentication mismatchC. process id of OSPF not matchD. OSPF timers not match
Answer: Tricky, could be A, B, D
Some details on why ospf neighbours failhttps:// www. cisco .com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/13699-29.html
Tested area in GNS3 and if area does not match then neighbour does not come up. Change area and neighbour comes up.
Tested authentication in GNS3 and if no match then neighbour does not come up. Change password and neighbour comes up.
Tested timers in GNS3 and if not matching then neighbour does not come up. Change and it does.

——————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
What is the function of the snmp-server enable traps and snmp-server host 192.168.1.3 trap version 1c public commands?A. to allow only 192.168.1.3 to access the system using the community-string publicB. to allow private communications between the router and the host.C. to collect information about the system on a network management serverD. to disable all SNMP informs that are on the system
Correct Answer: C

——————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
When an OSPF design is planned, which implementation can help a router not have memoryresource issues?A. Have a backbone area (area 0) with 40 routers and use default routes to reach externaldestinations.B. Have a backbone area (area 0) with 4 routers and 30,000 external routes injected intoOSPF.C. Have less OSPF areas to reducwde the need for interarea route summarizations.D. Have multiple OSPF processes on each OSPF router. Example, router ospf 1, router ospf 2
Answer: A
https ://www. cisco. com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/7039-1.html#t34a
It is not easy to figure out the memory needed for a particular OSPF configuration. Memory issues usually come up when too many external routes are injected in the OSPF domain. A backbone area with 40 routers and a default route to the outside world would have less memory issues compared with a backbone area with 4 routers and 33,000 external routes injected into OSPF.

Hope that helps. Let me know if you think differently.

@SM

Question 2 MSS: receiving host

https://www.cisco.com/c/en/us/support/docs/ip/generic-routing-encapsulation-gre/25885-pmtud-ipfrag.html

Each side of a TCP connection reports its MSS value to the other side. Contrary to popular belief, the MSS value is not negotiated between hosts. The sending host is required to limit the size of data in a single TCP segment to a value less than or equal to the MSS reported by the receiving host.

So your answer is correct

Hello everyone

Can you please share with me the last dumps

jotalopz @ hot… com

please share the latest route dumps rohitvarma4u @ gmail…

failed by a little. many new questions, labs are like here.

many new questions , Is not include on OCT DUMP ?

@Minal
@Tony Dean

In the question: Using new backup router in spite of faulty one in OSPF domain but relationship with neighbor in one interface only not working, what is the reason of this problem? (Choose two)

I think the answer is AB.

The question tells us that the relationship does not work only in one interface, so if it were a problem in the timers it would affect all relationships and not just one.

I understand that if it were a timers problem it would cause flapping in relationships, but at some point it is established.

Am I wrong?

Regards

Anybody know where I can study/review ccda 200-310 exam

@yerardux

Thanks for responding! :)

Here is the config i applied to routers:

R1 —- R5 —- R2

R1 to R5 is area 0:

R1:
interface Ethernet3/1
ip address 172.24.100.2 255.255.255.0
ip ospf 1 area 0
duplex half

R5:
interface Ethernet3/1
ip address 172.24.100.1 255.255.255.0
ip ospf 1 area 0
duplex half

Then R5 to R2 is area 1:

R5:
interface Ethernet3/2
ip address 192.168.1.1 255.255.255.0
ip ospf hello-interval 17 ————————–> Setting Hello timer just for that interface
ip ospf 1 area 1
duplex half

R2:
interface Ethernet3/2
ip address 192.168.1.2 255.255.255.0
ip ospf 1 area 1
duplex half

R5(config-if)#do sh ip ospf nei

Neighbor ID Pri State Dead Time Address Interface
172.24.100.2 1 FULL/DR 00:00:32 172.24.100.2 Ethernet3/1

No neighbour for R5 & R2. I left this running for 5-10mins, but it didn’t come up till i put in the command no ip ospf hello-interval 17 on R5:

Router(config-if)#no ip ospf hello-interval 17
*Nov 29 20:32:23.415: %OSPF-5-ADJCHG: Process 1, Nbr 192.168.1.2 on Ethernet3/2 from LOADING to FULL, Loading Done
Router(config-if)#do sh ip ospf nei

Neighbor ID Pri State Dead Time Address Interface
172.24.100.2 1 FULL/DR 00:00:37 172.24.100.2 Ethernet3/1
192.168.1.2 1 FULL/DR 00:00:38 192.168.1.2 Ethernet3/2

Exert from Cisco page linked above:

Verify that these HELLO parameters match on the neighboring interfaces:

– OSPF area number – Enter the show ip ospf interface interface-name command in order to check.

– OSPF area type, such as stub or NSSA – Enter the show ip ospf command in order to check.

– Subnet and subnet mask – Enter the show interface command in order to check.

– OSPF HELLO and Dead timer values – Enter the show ip ospf interface interface-name command in order to check.

I just hope it says name three, otherwise i’m not too sure what i’ll put down. Let me know what you think. :)

******* D O* N O T *O P E N *T H I S* L I N K *B E L O W ************

“” Remove QQ from link and get dumps
wow.linQQk/pWt “”

….This is from a scammer trying to install malware/spyware in your device !!!!
Every time you see that, copy and paste this message.

Thanks!

Hi please share the latest dumps {email not allowed}. Thanks

Hi please share the latest dumps entityrush0042@ google, Thanks

Neighbor ID Pri State Dead Time Address Interface
172.24.100.2 1 FULL/DR 00:00:32 172.24.100.2 Ethernet3/1

No neighbour for R5 & R2. I left this running for 5-10mins, but it didn’t come up till i put in the command no ip ospf hello-interval 17 on R5:

Router(config-if)#no ip ospf hello-interval 17
*Nov 29 20:32:23.415: %OSPF-5-ADJCHG: Process 1, Nbr 192.168.1.2 on Ethernet3/2 from LOADING to FULL, Loawsding Done
Router(config-if)#do sh ip ospf nei

Neighbor ID Pri StatesdDR 00:00:37 172.24.100.2 Ethernet3/1
192.168.1.2 1 FULL/DR 00:00:38 192.168.1.2 Ethernet3/2

By default, which type of IPv6 address is used to build the EUI-64 bit format?
A. unique-local address
B. IPv4-compatible IPv6 address
C. link-local address
D. aggregatable-local address

I think it’s the c, could you help me?
thanks

Hi everyone, Would it possible to convert OCT PDF files into VCE files ?

Or anyone here please share me a valid VCE OCT files.

Thanks

@El Cid

Not too sure on that one. I think the answer should be MAC address, but that isn’t an option, but I’m not aware of any of those being used in EUI 64.

If you have any more info then it would be great to find out more

IPV6 QUESTION NOT FAMILIAR? WHAT CAN I DO

Do we have a similar site for CCNA security 210-260?

Question 4
Which two statements about password-protecting device access are true? (Choose two)
A. The more system:running-config command displays encrypted passwords in clear text
B. The service password-encryption cwsommand forces a remote device to encrypt the password
C. A network administrator can recover an encrypted password
D. The privilege level command controls the commands a specific user can execute
E. The password can be encrypted in the running configuration

Answer: D E

Hello;
Where is the OSPF Stub lab?
I can only find the EIGRP Stub Lab.

Are they the same? Can comeone please, exmplain?

Thanks

@GM

Its the OSPF sim https://www.digitaltut.com/ospf-simulator

I’m new to this site, I used the ccna one for ccna so this brings me to ask this question.

On the right side of the screen, on the side bar, normally it has like ‘new questions 1’ ‘new questions 2’ etc.. but it only has 5 and 6? Is there no 1 and 2?

Please, can anyone tell should we study the entire 445 pages of October PDF?

Please, can anyone tell should we study the entire 445 pages of October PDF?
*
*
*
*
*
*
Please, can anyone tell should we study the entire 445 pages of October PDF?

@Anonymous i think (B)

Hi everyone , Please someone share the latest valid dumps for CCNP Route as i need to to complete route and then tshoot exam before february 23rd . my email is
adil.tanveer07 at gmail dot com … Please help Thanks in advance

i need latest or oct dump please. I will be very thankful, if some body can send me.
romailside at gmail com

Anybody know where I can study/review ccda 200-310 exam

Does anyone have the mobile vce apk for download please?

Does anyone have the mobile vce apk for download please?
(2)

I sat for 300-101 today and passed. Thanks Digitaltut!
Oct 2019 dumps are still valid!

@EngrHappy

Well done on passing! :)

Do you have any details of Qs, Sims and DnDs you got?

Any new Qs?

@Tony Dean I got a few unseen MCQ like ard 3-5 items.
D&D: AAA Accounting, Frame Relay, (cant remember others, there were alot)
Lab: OSPF (changed IP), EIGRP Eval, EIGRP Simlet
Best of luck!

Hi All,

I will be taking my exam shortly. I failed the first time around, so let’s hope I can pass this time.

I will update you on my results.

Wish me luck

@Anonymous
December 2nd, 2019

I think the “A”

Thanks for the update @EngrHappy. Fingers crossed they don’t change anything up too soon!

Good luck @ciscopass!!