Share your ROUTE v2.0 Experience

Anonymous, You posted about 50 questions on 11/17/19 & 11/19/19. Those questions are no longer on this site. Were these questions from an exam that you recently took? What date did you take the exam?

I recently took route and missed the margin by a few points.

Had this question below which confused me:

Which routing protocol by default allows traffic to traverse the best path and second-best path at the same time?

EIGRP
BGP

Both of these can do it if configured correctly, i chose BGP but unsure what answer is right.

My exam in less than 4 hours.. will update later..

@Anon
-> the ans is EIGRP

@ASIA 1 can you send me these 50 Q to my email stc187111 @ g m a i l . c o m

Anonymous, You posted about 50 questions on 11/17/19 & 11/19/19. Those questions are no longer on this site. Were these questions from an exam that you recently took? What date did you take the exam?

Thanks to digitaltut.. i subscribe the premium ques. i had passed the exam.. there is some question that is not in this digitaltut but anyhow if u know all the ques can pass dy.. I gt 87x… i will concentrate on tshoot now.

@Anon:

Which routing protocol by default allows traffic to traverse the best path and second-best path at the same time?

EIGRP
BGP

The answer is EIGRP. BGP does not load balance by default – which is what the question asks. As you state, either can ‘if you configure’. But eigrp does by default.

@NK
you learn only MPQ5 MPQ6 MPQ ?

@anonymous
I think the C

Hello guys,
Could someone please share with me the latest full version of VCE player to alpha122m (at) gmail (dot) com

Hi, i study everything in this page.. thats enough

Question 10
What from the following can cause an issue for uRPF?

A. Asymetric routing
B. CEF not enabled
C. uRPF not applied to the traffic source
D. if it is used as ingress filtering

Dump say A, i think B, we can confirm.

Passed with 9xx a few days ago. There were around 5 questions that are not here. One of them was about the MSS and the sender/receiver. Thanks 9tut!

Hello, can someone send me the octobre lab please
Thanks

Thanks digitaltut, i got 9xx on my test, october dump still valid.
Labs: ipv6 virtual link the same here. ospf: others ip’s, areas and process, drag drop the same; eigrp evo e ospf evo are the same. so study hard the october dump it’s eenough.

Does anybody have the question and answers on this website? this is the only explanation of questions …
please mail to bahramicq at Gmail

Please where can I find last valid route dump?
mobenchabane @ google com
Thanks

Please can some one informe aboute how many questions on digitaltut dump and frome where can I got it? thanks

@ bahram

check your mail

@ yerardux
Answer is A , Sure

Unicast Reverse Path Forwarding uRPF
with 5 comments

Another great security feature within every Cisco IOS ISR is uRPF, Unicast Reverse Path Forwarding. This nifty little feature has the router verify the source of any IP packets received is reachable via the routing table. uRPF is used to prevent common spoofing attacks and follows RFC 2827 for ingress filtering. The router will actually rely on the CEF table to perform lookups. uRPF works in 2 modes strict mode and loose mode, lets quickly talk about these two modes of operation.

Strict Mode: In this mode the router verifies the source of the IP packet arrives on the same interface the router would use to reach that source address. Beware of asymmetric routing.
Loose Mode: In this mode the router simply verifies the source IP can be reached via the CEF table using any interface.
Now that we quickly discussed the 2 different modes uRPF operates in, let’s go over a few quick tips:

Since uRPF relies on CEF, CEF must be enabled.
uRPF takes into account multiple paths, so if you are doing any equal cost load sharing uRPF will take that into account. uRPF will also take into account any unequal cost load sharing (such as EIGRP variance).
Asymmetric routing is different from (un)equal cost load sharing, and can/will cause issues with uRPF.
uRPF works best at the network edge, and to further specify the network edge not on your access layer the network edge facing the public internet.

guys can help here ?

Which type of address does OSPFv3 use to form neighbor adjecencies and to send LSAs ?

a. link-local address
b. multicast address FF02::5
c. unicast IPv6 address
d. unicast IPv4 address

A or B ?

@Simon
I think the B

Do the composite quizzes include all the questions from the PDF?

hello guyzz, is the routing protocol “IS-IS” included in 300-101 route exam topics?

Just passed today! 876, Thank you digitaltut! most from MPQ. may have 5 new questions or more. huhu
Lab-OSPF sim, ospf process id is 57 and area is 49, ip address 192.168.14.5 and. 6. Lab-OSPF ipv6 virtual link.

There a question thats is new, it ask for what will the dhcp relay do on the secodary address of the inferface. i choose is it will send multiple from primary and secondary.

I will post later what i will remember.

eigrp evaluation. same question. Careful on the show ip topology, it will not work, use show ip eigrp interface topolgy like that. hahaha

Hello team

Greate thanks for all information shared i passed the exams today.

Oct dump is still valid just few new questions don’t recall all.

Labs as mentionned in previous comments the OSPF sim changed but still same logic to use, ipv6 virtual link sim and EIGRP Evaluate ospf stub are same

Learn the dump correctly you’ll pass, premium membership does help.

Next target CCNP Switch

@spider_edz

What all labs and sims you had kindly let us know. We all are waiting to know.

Thanx

@spider_edz @nits
What is lab in test?
OSPF stub , OSPF Virtual-link , EIGRP eval ?

@Askk
As per digital tut labs:
Ipv6 ospf virtual link sim
Ospf sim
Eigrp stub
Eigrp Evaluation sim

Exam Labs  i only got 2 labs and 1 evaluation
IPV6 ospf virtual-link (same questions and config) just make sure that the loopback of the R4 will reflect at R1. check IPv6 route first at R1 before applying the configs, as you ping is not allowed. the time you see the route it is ok.

OSPF sim – same concept but the area is 49 and proceaa id is 57. use show ip OSPF neighbor and and ping the loopback to verify.

EIGRP evaluation-same question and answer. the show ip eigrp topology will not work. only the show ip eigrp interface topology will work, something like that.

I got confused on the dhcp relay something on secondary address on interface. choices are like
a. will send from primary and seconday
b. will receive from primary and secondar
c. will multiple send from primary and secodary
d. will not send on primary and send in seconary.

not familiar with the question, i jud choose the multiple send.

drag n drop – frame relay config(no ip address, interface serial point to point, fram relay..serial…virtual templat 1, ppp authentication chap.

can you send me for CCNP your dump, deo191 @ mail . ru
Please, help me
thank you

there is an exhibit
All interfaces on each router are participating in the EIGRP 100 process.
An engineer issues the eigrp stub command on router BR1.
What will the show ip route be on HQ-R1 look like?

but i was shock because the show ip routes was shown in aqsHQ-R1 in the choices. but i choose the all routes that are shown in the exhibit pointing to router HQ-R2 because BR1 will send the summary and its connected.

@deo191 I only have the october dump and premium digital tut

to clarify show ip routes table are shown in the choices.

spider_edz please send october dump and premium digital tut deo191 @ mail . ru
thank you

Can someone please confirm if these are the current sims?

Some people say OSPF Stub Sim / others say OSPF sim

– OSPF Stub Sim (Hostname, Area, OSPF Process ID – changed)
http://www.digitaltut.com/route-ospf-sim

– EIGRP Evaluation Sim
http://www.digitaltut.com/eigrp-evaluation-sim

– IPv6 OSPF Virtual Link
http://www.digitaltut.com/route-ipv6-ospf-virtual-link-sim

Thanks

can you share the lates updated dumps ?

Passed my exam today with a relatively high score!

3 Labs: OSPF Stub / OSPFv3 Virtual Link / PBR
EIGRP Eval Sim

4 DND: AAA / BGP States / Frame Relay / IPv6 ACL

Forgot to mention there are also new various questions not here in the dump. Not difficult, but important to understand the concepts behind the CCNP topics rather than just dump it all.

Use this to test your knowledge and extra practice, not for an easy pass.

@MRAnon
How many multiple choice?

For those who have passed. How many questions you have? On CISCO site it is noted 45-65.

Hey guys, Alhamdullilah just cleared Route just now. Scored 915.

The labs are same over here. (except for OSPF where IDs and IP is changed)
2 DnDs
Just go through the official Cert Book, it is damn helpful.
If u guys require any understanding on a topic do let me know.
All the best

One small advice to the genuine people, never purchase the dumps from people who are selling on this forum. As u cannot track them back.

Specially those who provide links and say to remove for example 123 from the link and then get the dumps.
Pls don’t fall into this as they scam a lot of people and are not genuine.

Never purchase from them keep save and trust yourself.

DigitalTut should do something so that these scammers are not allowed to share such links and play around with innocent people.

May these scammers Burn in Hell!

Hi, May someone please share the October Dumps with me. I have to take the exam on the 4th (next week)

el.capitanne** @gmail-com-

@ASKK

Off the top of my head there was 60 questions total. So 52 multiple choice, 4 D&D, 3 Lab and 1 Sim

Hi Lio,
I need your help brother. which dump did you use?

@EL Capitanne
You testing on 4 times ? lol 1-3 fail right?

I have the test in 2 hours. I’ll let you all know how it goes.

Hi is it possible to pass with just lets say 200 of 445 pdf pages from OCT dumps?

Hi @Aj this is leo here…. i used a premium dump from someone.

Thats how it is possible.

But many questions are there in the Oct_Dump here too.