Share your ROUTE v2.0 Experience

@Eledu Could you please send the most recent VCE
This is my email ( M7mad.mxs @ gmail .com )

After of 3 months discussions here i just passed the exam…9xx…5-6 new q(route map,snmp trap 2c public)….same dnd same labs(on ospf lab the command ping FEC0:4::4, and the sh ip route loopback on eigrp sim didn’t work)..good luck guys ..c u on tshoot…if someone wants something just give me his mail(i studied very very very well oct_dump and certprepare)
P.S1 one little advice don’t just memorize the answer, i google every question and read lots and lots of datasheets and manuals to understand some dump’s answers (
P.S2 THE DUMP HAS SOME MISTAKES ANSWERS

@Eledu Could you please send the most recent VCE
This is my email ( abdlfdlb @ hotmail .com )
thanks

@Greek_guy, can you help me, I will take the exam this end of nov. my email is spi*der*_edz*17 @ yahoo.com. Thanks a lot

Guys passed the exam today, 2nd attempt

@greek guy

Please check sims for OSPF ip addresses.

All the very best on to TSHOOT

@eledu can you please send me latest VCE ?
thx !

simon911 @ centrum . cz

@Moza…Well done
Sorry i meant the ipv6 ospf lab.Thanks

Hi
Where is the latest VCE file

Hi,
Can someone send me the latest VCE?
My email address: {email not allowed}

Thanks

Hi,
Can someone send me the latest VCE?
My email address: fjf25 @ yahoo . com

Thanks

Hey guys
Quick question please
My friend had his test last week , and he said he faced a problem in the EIGRP Evaluation lab.

( https://www.digitaltut.com/eigrp-evaluation-sim#more-1014 )
For question #1 he said he got a incomplete command when he wrote the command ( show ip interface brief )
what do you think guys?
Is there is any problem with the ( show ip interface brief )
or is it a correct command ?

and if there is any problem with it what should we write instead ?

Thanks in advance for your answers

Complete to my previous question about Eigrp evaluation

He also said when he wrote show ip route 150.1.6.6 he will get incorrect command

could anyone please fully explain how should we answer question# 1 in this link
( https://www.digitaltut.com/eigrp-evaluation-sim#more-1014 )

thank you

Hey guys,

I see people talk about OSPF stub but I don’t find this lab here please can any one tell me where can I find this.
Thanks in advance.

Don’t trust this person “KASHIF BOOTA” he is a scammer. The one who made this forum a garbage.
All his comments as passed with 9xx and a link.

To all the people who passed a 2nd time, did you get the same labs both times ? Or new labs on your 2nd attempt ?

Which command sequence can you enter a router to configure Unicast Reverse Path Forwarding in loose mode?
A. interface GigabitEthernet0/0
ip verify unicast source reachable-via loose.
B. interface GigabitEthernet0/0
ip verify unicast sourwce reachable-via all.
C. interface GigabitEthernet0/0
ip verify unicast source reachable-via any.
D. interface GigabitEthernet0/0
ip verify unicast source reachable-via rx.
Correct Answer: C

Hi when you say OSPF Stub came out in the exam do you mean OSPF SIM?

@ X

Yes same Labs IPV6 Virtual-Link, OSPF SIM (Different IP’s and process etc) and EIGRP EVAL

Hi,

Is the EIGRP – SHOW IP EIGRP TOPOLOGY ALL-LINKS simlet still in the exam?

Thanks

@moza

Allow network 192.168.4.4/30 to join Area 1, notice that you have to convert subnet mask into wildcard mask:

Portland(config-router)#network 192.168.4.4 0.0.0.3 area 1

Configure Portland as a stub:

Portland(config-router)#area 1 stub

Portland(config-router)#end
Portland#copy running-config startup-config

+ Configure Amani router as a “totally stub”:

Amani#configure terminal
Amani(config)#router ospf 1
Amani(config-router)#network 192.168.4.4 0.0.0.3 area 1

So this is valid only with different ip a area

@ Jakob

Amani#configure terminal
Amani(config)#router ospf 1
Amani(config-router)#network 192.168.4.4 0.0.0.3 area 1

Amani#area 1 stub no-summary

So only if and area could be different subnet and wildcard mask remain the same ??

@Greek_guy Can you share your information?
spark9260 at gmail dot com

Hi all – Going for the Route exam soon. Can someone forward me the latest vce and a vce player to support it in case mine doesn’t work with it?
Thanks and regards

switch010101 at gmail dot com

Hey guys,

I see people talk about OSPF stub but I don’t find this lab here please can any one tell me where can I find this.
Thanks in advance.

Hi Guyes, I have valid Dumps that i used to pass the Route exam, if any one need than contact on Skype naas.tech_1 only with a small fee. dumps are 100% valid.

Hi Guyes, I have valid Dumps 250 Questions only that i used to pass the Route exam, if any one need than contact on Skype naas.tech_1 only with a small fee. dumps are 100% valid.

Can anyone give the right answer for this question? every dump I have seen has different answers and explanations for the same..

The enterprise network WAN link has been receiving several denial of service attacks from
both IPv4 and IPv6 sources. Which three elements can you use to identify an IPv6 packet via
its header, in order to filter future attacks? (Choose three)
A. Traffic Class
B. Source address
C. Flow Label
D. Hop Limit
E. Destination Address
F. Fragment Offset

Hello @Diogenes, @Skidaddy, @Eledu, @Moza, @Loveit,

Kindly email me the latest dump in this format if possible:

– VCE file and the player
– pdf file

my email address tommyr_ny at yahoo dot com (delete spaces please)

my CCNA certification (Security, R&S) is expiring on November 25 and I am planning to take CCNP ROUTE exam to keep my CCNA certifications active as the exams are very expensive
Thank you and appreciate your help.

Good Luck to all here who are still pursuing their CCNP Route

Could anyone please email me the latest dumps of CCNP 200-101
my email is gihernandezn1511 at gmail dot com

300-101. My bad

I passed the examen.

The information here is correct.

Labs: OSPF, EIGRP SIM, IPv6 OSPF virtual link

Thanks

Mrs, my exame is tomorrow, can you send me the latest dumps? I study July Dump, not Octuber. Please, help me with this: r e n e e . h e l p @ gmail . c o m

Good Luck for all of us!

I took the route exam today to re-certify and I passed it. Material on Digitaltut had a significant contribution to me passing it.
I read the book before hand and it is good to know and brush up on you concepts. But without practicing with the question bank and dumps, passing the test can be difficult.

Thank you Digitaltut.

Hello guys,

I can see people talk about OSPF stub but I can’t find this lab here please can any one tell me where can I find this.
Thanks in advance.

@Ahmed1408, this is the OSPF stub lab

https://www.digitaltut.com/route-ospf-sim#more-84

Hi guys, who can share me ROUTE_OCT.pdf DUMPS
this my email ciscsoria@gmail***.com****

Thanks digitaltut, i got 888 on my test, october dump still valid.

Labs: ipv6 virtual link (IPs, ID areas and OSPF process ID was different), ospf stub, Eigrp Evaluate
DnDs: AAA, NAT64, TACACS/RADIUS, frame Relay

Premium membership is very usefull.

Hi guys, who can share me ROUTE_OCT.pdf DUMPS
this my email probeseguro@gmail***.com****
thx

could you please pass the new dump address?

Regards

I have passed today with 9XX.

Further, i have completed below exam
642-813 (switch)
300-135 (Tshoot)
300-101 (Route)

Can i get CCNP ?

Hey Amar
can you send me for CCNP your dump, trieutrunghieu93 @ gmail . com
Please, help me
thank you

I have passed today. I have learned just MPQ+NUQ5+NUQ6, but that is not enough, there was about 8 other questions, so I got luck :)
Labs:
– OSPF Stub Sim (Hostname, Area, OSPF Process ID – changed)
– EIGRP Evaluation Sim
– IPv6 OSPF Virtual Link

Also 2 DND I don’t see before.

Took my exam today – Failed – 709/1000.

A lot of new questions. 6-7 DND, 2 of them were not on digitut.

Labs – OSPF Sim (Hostname, Area, OSPF Process ID – changed)
– EIGRP Evaluation Sim
– IPv6 OSPF Virtual Link.

Can someone please tell me what other material should I refer? I studied from CBT nuggets and Digitut.

Hello everyone

Can you please share with me the last dumps

this my email souf.s.07@gmail—com—-

@Greek_guy, pls i will be taking exam very soon , i will appreciate it if you can send the vce dump for oct to my mail. adesua1931 at gee mail dot com.

passed 888/1000 – nov 20, 2019

just study the oct pdf from this site, ports of syslog, gre tunnel, ripv2, lsa of ipv6,

drag and drop . ip operation, frame relay multipoint, snmp

lab/simlet . ospf sim , ipv6 virtual link, eigrp evaluation sim

tshoot next .

can anyone share with me any CCNP R&S pdf DUMPS .
M.gamal@ maxnet-sd.com .

You are configuring a Microsoft client to call a PPP server using CHAP. Only the client will be authenticated but the client‘s password has expired and must be changed. Which PPP server configuration allows the call to be completed?
A. ppp authentication ms-chap callin
B. ppp authentication chap
C. ppp authentication ms-chap-v2 callin
D. ppp authentication chap callin
E. ppp authentication ms-chap-v2

Answer: C or E???

Hey Amar,

You can’t get certified with that. I would advise you write the updated switch exam before Feb 22, 2020.