Share your ROUTE v2.0 Experience
| Note: The last day to take this ROUTE 300-101 exam is February 23, 2020. After this day you have to take new Enterprise exams to get new CCNP Enterprise certification. If you want to find out more about the new exams please visit here. |
The ROUTE 300-101 (ROUTE v2.0) exam has been used to replace the old ROUTE 642-902 exam so this article is devoted for candidates who took this exam sharing their experience.
Please tell with us what are your materials, the way you learned, your feeling and experience after taking the ROUTE v2.0 exam… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note: Posting email is not allowed in the comment section.
Your posts are warmly welcome!
ROUTE_OCT
With PCA and PCB and there are three routers between them and a different MTU value and they want a PCA to run an application with PCB and DF is set so we have to choose?
A. MSS
B. PMTU
C. GRE
D. ?
Dump say B
I think A, Its correct?
Hi evrery one , please share with me the valide dump ,
I’m very lost , so , pleas please please take me a feedback .
Anyone else read OCT dumps correctly and fails?
Hi, I have the actual dumps with VCE, please if you have the material for 300-115 put your email and I’ll send to you the route material (No lies)
@ Mike
Thank you so much, zah06059112 @ g m a i l . c o m please send it here
Hi guys,
I keep getting really bad results on infrastructure services part I may need to go through ipv6 NAT again as this is 20% of exam can any one let me know what areas need to improve in?
@Nick, always issue copy run-start, if it works, ok, if it doesn’t, don’t worry as some simlets don’t work properly.
In my exam the ipv6 ospf didn’t save config, the other simlets did. Tabbing sometimes doesn’t work but “?” should always work. If “?” is not working ask your examinator about keyboard layout/problems.
Learn ospf and eigrp area types, and (for ospf) wich lsa and routes they permit.. some questions (and simlet) were about this
Veena stinks.
OMG go away guys lol x
What from the following can cause an issue for uRPF?
a. cef not enabled
b. if it is used as ingress filtering
c. asymetric routing
d. urpf not applied to the traffic source
digitaltut says answer is c
CORRECT ANSWER IS A
PROOF THIS IS FROM CISCO’S “UNDERSTANDING UNICAST REVERSE PATH FORWARDING” document:
Unicast RPF Examples
Cisco IOS Devices
An important consideration for deployment is that Cisco Express Forwarding switching must be enabled for Unicast RPF to function. This command has been enabled by default as of IOS version 12.2. If it is not enabled, administrators can enable it with the following global configuration command: ip cef
Hey @littletimmy,
In regards of your comment, please check your own response.
“This command has been enabled by default as of IOS version 12.2”.
From my understanding, currently this is not an issue since is enabled by default. Besides, this IOS end of support was in 2013. Hence, I do not think Cisco will go so deeper asking for techs/commands that are running by default in its own IOS for that long.
Hope this helps mate.
@little timmy
Man u r right, i foung too…this seems to be correct…..i am wondering, why all the others sites give C the right answer
ROUTE_OCT
With PCA and PCB and there are three routers between them and a different MTU value and they want a PCA to run an application with PCB and DF is set so we have to choose?
A. MSS
B. PMTU
C. GRE
D. ?
Dump say B
I think A, Its correct?
@paquipaco
After reviewing what you said
Since uRPF relies on CEF, CEF must be enabled.
uRPF takes into account multiple paths, so if you are doing any equal cost load sharing uRPF will take that into account. uRPF will also take into account any unequal cost load sharing (such as EIGRP variance).
Asymmetric routing is different from (un)equal cost load sharing, and can/will cause issues with uRPF.
uRPF works best at the network edge, and to further specify the network edge not on your access layer the network edge facing the public internet.
SO, I guess the answer is C, my reasoning: If CEF is not enabled, uRPF will not work at all. However, if asymettric routing is occuring uRPF CAN WORK but you will get ISSUES – i guess that is what the question is looking for.
I would say either could be correct, very badly worded question though.
@greek_guy hopefully my answers helps you decipher that the correct answer is C , (not A like my original post)
Thank you guys for the responses.
Q212 ROUTE OCT
Which two statements about the enable secret and enable password commands are true? (Choose two)
A. If both commands are missing from the global configuration, vty lines use the console password
B. The enable secret command overrides enable password
C. The enable password command has a stronger encryption algorithm than enable secret
D. The enable secret command is backwards-compatible with more versions of IOS
E. The enable secret and enable password commands must be used together
Dump say A&B
In the others dums say A & D
Cisco say:
If neither the enable password command or the enable secret command is configured, and if a line
password is configured for the console, the console line password will serve as the enable password for all vty (Telnet and Secure Shell [SSH]) sessions
AB is correct!
Hi, anyone kindly share the dump file for the route
@Moza I’ve sendt to you the dumps (I have one year downloadable in passlader)
If anyone wants the material please put your email, tomorrow I’ll check and I’ll send to you guys
Thanks for all the tips, I passed 2 weeks before.
Oh sorry, I can’t attach the VCE ’cause is too heavy for the email
@Mike please send the dumps to sven_s o u l s at yahoo com
@Mike please dumps to edwinbim2007 at gmail com
@Mike
please provide dump to spark9260 at gmail com
Hi mike please send me dumps , rajesh.n0288 @ gmail . Com
@Mike
please share the dump to cnvaro14 at hotmail .com
@mike please send on d819847 at gmail
@Mike: Please send me dumps, thanks! : hoaisonvu77 @ gmail . com
Noone gave the exam to tell us his experience???
Taking the test later today, will report back
@ Charles Rogers
waiting to hear from you. please let us know is it enough to learn only MPQ, NU 5 6 .
@Charles Rogers: THank you we await your feedback. All the best with the exam!
I am sure that @Charles Rogers will tell us that the exam has changed 😉😉
Hi mike, please send me dumps kjqa1991 @ gmail . com
@Mike
Hi mike, please send me dumps kjqa1991 @ gmail . com
@Mike
please share the dump to fwys333 hotmail com
Which two statements about the enable secret and enable password commands are true? (Choose two)
A. If both commands are missing from the global configuration, vty lines use the console password
B. The enable secret command overrides enable password
C. The enable password command has a stronger encryption algorithm than enable secret
D. The enable secret command is backwards-compatible with more versions of IOS
E. The enable secret and enable password commands must be used together
Dump say A&B………..
@Mike, i appreciate your help, thanks.
email = r a h i m a m i r 2 1 2 @ g m i a l . c o m
@ Mike please can you send me the dump @ …….
t r a n s s t I r @ g m a I l .come
Would appreciate it thanks
Hello guys!today I passa with 790……walk on the blade !rs
DnD (AAA, ACL, Frame relay, GRE) and a new about snmp
3 Labs
– OSPF Stub Sim (Hostname, Area, OSPF Process ID – changed)
– EIGRP Evaluation Sim
– IPv6 OSPF Virtual Link
dropped about 15 questions that aren’t here
@curintia
Well done…u have 15 new q except oct dump?
Hi guys, I’ve already send the dumps , remember that is not about to just learn answers, is about study and help yourself with the dumps.
Good luck
@Mike
Mike you forgot to send me the dump, would you mind sending it to my email
{email not allowed}
thanks in advance
@Mike
Mike you forgot to send me the dump, would you mind sending it to my email
r a h i m a m i r 2 1 2 @ g m a i l . c o m
thanks in advance
@Mike
Mike, i found it in the spam
thank you very much
Passed earlier today with 880/1000. October dump is still valid. Maybe 3-4 new questions, 1 I kind of remember was a question about DHCP relay with secondary IPs. I studied the entire October dump and not just the MPQ, NQ5 or NQ6. I went through the entire PDF and made anki flash cards of all the questions I wasn’t 100% sure about. Took me a day to get through the whole PDF. Reviewed all my flash cards before my test and that was enough to get me through. Good luck!
@ Mike
Thank you, please send via hoang anh tc 28 @ g m a i l. c o m
@Charles Rogers
what sims did you get?
Sorry @Jone , can you confirm your e mail?
I think that my email account is banned for one day, but tomorrow I’ll send to you
@Mike, please send me the dumps,
email > j o l u m i s e @ g m a i l . c o m
Thanks,
@Anonymous
I think E is correct ..if u read the explanation on Oct dump it says this
One guy says the dump is valid only 3 q were new…..the other says 15 q new…i don’t know how some guys tell lies..this site is only to share and help each other to pass the exam.
P.S one little advise…don’t try to pass the exam ,just studying 300 and memorize the labs…try to understand what u study
@Mike
Could u send the dumps
e l f t e s i m @ g m a i l . c o m
Thanks