Share your ROUTE v2.0 Experience

@ diegos Np, we are here for same reason

Btw, my dump is based on procyber +questions +sorted by order +some corrected questions and answers consulted with ppl from here

Thank you @Eco for sharing the link and @Dexter for your great support!!

Which two protocols are required for DMVPN? (2)
A. IPSec
B. Open vpn
C. NHRP
D. mGRE
E. PPTP
what are correct?

@Udara nhrp and mgre {C and D}

updated the latest ccnp route dumps with 450+Q

http://www.ozshm.com/ccie.html

@udara – NHRP & mGRE is the answer.

Hi Guys,

Passed 300-101 Route exam this morning from India and cleared all the 3 papers in CCNP now ;).
I referred only Digitaltut (Premium Membership) for Sim’s questions and Dexter dump (300-101 – Project X – Digital-Tut + CERTbus + PassLeader – updated by dexter v1.8 15.12.2017). Most of the questions are from Dexter dumps only and it is enough to pass the exam. Thank you, Dexter, for your effort and hard work. Please find the Sims and DND questions below which i have got in the exam today.

Sims:
=====
* OSPF Evaluation Simulator
* EIGRP Evaluation Simulator
* OSPF Simulator
* Policy Based Routing Simulator
* EIGRP OSPF Redistribute Simulator

Drag and Drop:
==============
* GRE Features (mGRE, IPsec, Keepalive, MSS, tunnelkey).
* IPV6 NAT Characteristic (Network-specific, Well-known, NAT64, NPTv6).
* NAT-PT/NAT64 (Network-specific, Modifies session, Modifies IP Header, Maps one IPV6 address)
* Frame-relay components (SVC, DLCI, PVC, LMI, FECN).
* Authentication/Accounting/Authorization.
* IPv6 traffic filtering/IPV6 Access classes
* uRPF modes (Loodse mode/strict mode)

Dexter dump links:
==================

https://mega.nz/#!tFMTCQzJ!sEQpzx3xRnkplOh-nG8N-rckxZSIdEwj69ux0sJvo0w and Pdf format file – https://mega.nz/#F!tNtkSB5A!4Glpa9BrYDbAcAPsbtmDjA

TIPS:
=====

Please read the below-mentioned guys comments without fail before attending the exam, It will be really helpful to clear the exam.

* Lunchi – Page 216,217.
* Rob121 – Page 219.
* Dexter – Page 219.

Thank you Dexter, Lunchi, Rob121, Digitaltut and other members for your hard work and continuous support on this page.

All the very best for the exam takers.

TSHOOT 300-135:
===============

Those who are planning to attend CCNP Tshoot exam (TSHOOT 300-135), Just “Networktut” Premium Membership (http://www.networktut.com/) is enough to pass the exam.
I have cleared the exam on 27th Dec 2017 and read my comments on page no 279 (https://www.networktut.com/share-your-tshoot-v2-0-experience/comment-page-279#comments).

All the very best for the Tshoot exam takers.

Hi Guys,

Passed 300-101 Route exam this morning from India and cleared all the 3 papers in CCNP now ;).
I referred only Digitaltut (Premium Membership) for Sim’s questions and Dexter dump (300-101 – Project X – Digital-Tut + CERTbus + PassLeader – updated by dexter v1.8 15.12.2017). Most of the questions are from Dexter dumps only and it is enough to pass the exam. Thank you, Dexter, for your effort and hard work. Please find the Sims and DND questions below which i have got in the exam today.

Sims:
=====
* OSPF Evaluation Simulator
* EIGRP Evaluation Simulator
* OSPF Simulator
* Policy Based Routing Simulator
* EIGRP OSPF Redistribute Simulator

Drag and Drop:
==============
* GRE Features (mGRE, IPsec, Keepalive, MSS, tunnelkey).
* IPV6 NAT Characteristic (Network-specific, Well-known, NAT64, NPTv6).
* NAT-PT/NAT64 (Network-specific, Modifies session, Modifies IP Header, Maps one IPV6 address)
* Frame-relay components (SVC, DLCI, PVC, LMI, FECN).
* Authentication/Accounting/Authorization.
* IPv6 traffic filtering/IPV6 Access classes
* uRPF modes (Loodse mode/strict mode)

Hi Guys, Passed 300-101 Route exam this morning from India and cleared all the 3 papers in CCNP now ;).
I referred only Digitaltut (Premium Membership) for Sim’s questions and Dexter dump (300-101 – Project X – Digital-Tut + CERTbus + PassLeader – updated by dexter v1.8 15.12.2017). Most of the questions are from Dexter dumps only and it is enough to pass the exam. Thank you, Dexter, for your effort and hard work. Please find the Sims and DND questions below which i have got in the exam today.

@ItGirl
thqq
and this one

Which OSPF network type doesn‘t require a DR/BDR election? (Choose two)

A. Broadcast
B. Point to point
C. Non-Broadcast
D. Point-to-multipoint
???

Hi Guys, Passed 300-101 Route exam this morning from India. Digitaltut (Premium Membership) and Dexter dump is enough to pass the exam.

Thank you, Dexter, for your effort and hard work. Please find the Sims and DND questions below which i have got in the exam today.

Sims:
=====
* OSPF Evaluation Simulator
* EIGRP Evaluation Simulator
* OSPF Simulator
* Policy Based Routing Simulator
* EIGRP OSPF Redistribute Simulator.

Drag and Drop:
==============
* GRE Features (mGRE, IPsec, Keepalive, MSS, tunnelkey).
* IPV6 NAT Characteristic (Network-specific, Well-known, NAT64, NPTv6).
* NAT-PT/NAT64 (Network-specific, Modifies session, Modifies IP Header, Maps one IPV6 address)
* Frame-relay components (SVC, DLCI, PVC, LMI, FECN).
* Authentication/Accounting/Authorization.
* IPv6 traffic filtering/IPV6 Access classes
* uRPF modes (Loodse mode/strict mode).

Dexter dump links:
==================

https://mega.nz/#!tFMTCQzJ!sEQpzx3xRnkplOh-nG8N-rckxZSIdEwj69ux0sJvo0w and Pdf format file – https://mega.nz/#F!tNtkSB5A!4Glpa9BrYDbAcAPsbtmDjA

TIPS:
=====
Please read the below-mentioned guys comments without fail before attending the exam, It will be really helpful to clear the exam.

* Lunchi – Page 216,217.
* Rob121 – Page 219.
* Dexter – Page 219.

Thank you Dexter, Lunchi, Rob121, Digitaltut and other members for your hard work and continuous support on this page.
All the very best for the exam takers.

TSHOOT 300-135:
===============

Those who are planning to attend CCNP Tshoot exam (TSHOOT 300-135), Just “Networktut” Premium Membership (http://www.networktut.com/) is enough to pass the exam.
I have cleared the exam on 27th Dec 2017 and read my comments on page no 279 (https://www.networktut.com/share-your-tshoot-v2-0-experience/comment-page-279#comments).
All the very best for the Tshoot exam takers.

Sorry guys forget to set my name in the above comments (Guru – Anonymous January 8th, 2018)

Is there anyone who have good heart? And ready to help GOD creatures.

I’m really in trouble, need VCE latest version to download. Having exam on sunday. Really need it. Search every link in google but not helpful.

I request please help.

Share Link or email the latest crack version:

hottin_2hot@ h o t m a i l . com

@ udara point to point {B}

@NeeD Help

Please, read the comments from Dexter in the last pages. He gives the whole material (Qs, VCE player, sims, etc.)

Good luck

@ NeeD Help – You can get the VCE player version 1.1.2 file from this link https://mega.nz/#!tFMTCQzJ!sEQpzx3xRnkplOh-nG8N-rckxZSIdEwj69ux0sJvo0w

Hello everyone. I will give my exam after a month. Finished overall preparation but need dump questions which are still valid. Thanks in advance
email: oustamli2018 @ ada . edu . az

Friends, can anyone advice me how to prepare for Sim lab of CCNP Route exam. Is there any dumps please share it.

Just re-certified today taking this exam.

Use this page or Dexter files shared earlier and you will be fine.

SIMs:PBR, OSPF Config, OSPF Evaluation, EIGRP Evaluation, Redistribution.
D&D: AAA, IPv6, FR
Questions: Really a lot of IPv6, DHCPv6, IP SLA and EVN. Make sure you prep on these well! Some PPPoE, RADIUS/TACACS, DMVPN, CEF and NETFLOW.

All in all tough test but very few questions about routing protocols :( ??? How is this a ROUTING exam.

All the lazy ppl that keep posting their email address here and want someone to send them dumps should fail due to being lazy and simply not trying to find the material that was clearly shared already! You should not be network engineers for sure, you are are so lazy that you can find the materials how can you possibly be a network engineer?

Other than a working EIGRP configuration, which option must be the same on all routers for EIGRP authentication key role over to work correctly?

A. SMTP
B. SNMP
C. Passwords
D. Time
c or d

Two limitations when use NPTv6 for IPV6 to IPV6 Address translation?

A. stateful address translation
B. a limit of 32 1-to-1 translations
C. lack of overloading functionality
D. identify all interfaceas NAT inside or outside
E. 1-to-1 prefix rewrite
F. mismatched prefix allocations

C, E or C, F

Just passed CCNP Route yesterday. Procyber v1.5 is still valid.
LAB: EIGRP OSPF Redistribution, PBR, OSPF EVAL SIM, EIGRP EVAL SIM, OSPF SIM, EIGRP STUB SIM

All of the following questions appeared on my exam:
Question 1
Which two statements about NHRP in a DMVPN environment are true? (Choose two)
a. It requires each endpoint to have a unique network ID
b. It routes traffic through the tunnel
c. It can identify PIM-SM RPs over a tunnel
d. It can authenticate VPN endpoints
e. It provides address resolution to route traffic
answer: D and E
———————————————
Question 2
Which two commands do you need to implement on the CALLING router to support the pppoe client ? (choose Two)
A. peer default ip address pool
B. mtu
C. bba-group pppoe
D. pppoe enable group
E. pppoe-client dialer-pool-number
answer: B and E
———————————————
Question 3
what does radius server combine ?(choose two)
A) telnet
B) authentication
C) accounting
D) authorization
E) SSH
Answare:BD
———————————————–
Question 4
What from the following can cause an issue for URPF? (this could be single answer or multiple choice)
OR
Reasons why urpf may fail:
A.Assymetric routing
B.Cef not enabled
C.Urpf not applied to the traffic source
D.If it is used as ingress filtering
Answer:A
————————————————
Question 5
In which scenario can asymmetric routing occur?
A. active/active firewall setup
B. single path in and out of the network.
C. active/standby firewall setup
D. redundant routers running VRRP
Answer: D
———————————————
Question 6
Refer to the exhibit. How can you configure a second export destination for IP address 192.168.10.1?
A. Specify a different TCP port
B. Specify a different UDP port
C. Specify a VRF
D. Configure a version 5 flow-export to the same destination
E. Specify a different flow ID
Answer: C
————————————–
Question 7
Configuration snippet that looks similar to this:
ip access-list 1 permit xx xx
ip nat inside source list 1 int fa0/0 overload
What is this an example of?
A. static NAT
B. something about the ACL
C. PAT
D. dynamic NAT
Answer: C

Many thanks to everyone who shared their knowledge and resources! God bless you all!

Congs SleepyHead
Just a quick one?
And how sure are that this the correct answer!
*******
Question 6
Refer to the exhibit. How can you configure a second export destination for IP address 192.168.10.1?
A. Specify a different TCP port
B. Specify a different UDP port
C. Specify a VRF
D. Configure a version 5 flow-export to the same destination
E. Specify a different flow ID
Answer: C
************:

shouldnt this be B?

Which two options are limitations of stateful NAT64?

A. Layer 4 supports tcp only
B. It is unable to route multicast traffic
C. It is unable to route vrf traffic
D. It supports DNS only
?? any one help me

@udara – B. It is unable to route multicast traffic, C. It is unable to route vrf traffic

yes. Guru
that is correct>
NTP operating modes must the trusted-Key command??
a.Peerb
b.client
c.server
d.broadcast
what ???

@brob

b,c,d
guru i am correct?

(new q)

How to minimize unicast flooading?
By decreasing the arp time compared to CAM table time

@brob

NTP operating modes must the trusted-Key command – Ans: broadcast, client, peer.

@udara

minimize Unicast flooding? – The one you mentioned is correct (By decreasing the ARP time compared to CAM table time).

The enterprise network WAN link has been receiving several denial of service attacks from both IPv4 and IPv6 sources. Which three elements can you use to identify an IPv6 packet via its header, in order to filter future attacks? (Choose three)
A. Traffic Class
B. Source address
C. Flow Label
D. Hop Limit
E. Destination Address
F. Fragment Offset
guru help me ??

If ypu configure one router in your network with the auto-cost reference bandwidth 100 command, which effect on the data path is true?

a. The data path remains the same for all links
b. The data path changes for all links
??

please help me. tomorrow i have exam. please>>>

BCE
a
come on, use Dexter’s dump

Hello everyone.

IP CEF load-sharing options (Choose three)

May anyone give reference for this concept? I could not find in book. I think answer in Dexter’s dump is wrong for this question

Hi Guys,

Its Mani Pulate,

I really appreciate all your input with the exam updates. I will contribute as soon as I have written my Route exam next week Friday. however anyone who can assist with any PDF updated dumps I will appreciate.

To those people asking for a copy of procyber v1.5, here’s the link. I have passed my exam yesterday so I could say that it is still valid.

https://drive.google.com/file/d/1uetIqDkl8shjUR6yruZtmPWNyAR64m1q/view

@udara

* The enterprise network WAN link has been receiving several denial of service attacks from both IPv4 and IPv6 sources. Which three elements can you use to identify an IPv6 packet via its header, in order to filter future attacks? (Choose three)

Ans: Source address, Destination Address, Flow Label.

* If ypu configure one router in your network with the auto-cost reference bandwidth 100 command, which effect on the data path is true?

Ans: The data path remains the same for all links

@ udara, @ CCNP Dumps

Please use the below dumps which is valid. I passed the exam yesterday with the help of below dumps and Digitaltut (Premium Membership)

Dexter dump links:
==================

https://mega.nz/#!tFMTCQzJ!sEQpzx3xRnkplOh-nG8N-rckxZSIdEwj69ux0sJvo0w and Pdf format file – https://mega.nz/#F!tNtkSB5A!4Glpa9BrYDbAcAPsbtmDjA

@guru
thqq

udara lh @ gmail . com
guru remove space and send me a mail

@ udara – Use the above link to download the dumps.

confusion in below question:

In which scenario can asymmetric routing occur?
A. active/active firewall setup
B. single path in and out of the network.
C. active/standby firewall setup
D. redundant routers running VRRP
Answer: D

which answer is right D or A

I think right answer should be A???

can anyone confirm

@wellwisher
correct anw== D
redundant routers running VRRP

thanks for replying but theory says its A

@wellwisher
could you provide please some references where you found that corect answer could be A?

Hey guys, If anyone required route lab access for all lab hands-on mail me at appslet at gmail dot com