Share your ROUTE v2.0 Experience

@ rezza
post your mail address hear i will send you all the dumps.

Hey All,
Just passed today with a 890.
55 questions
About 10 new ones.
3 labs, OSPF (Different IPs), IPv6 OSPF Virtual Link (Exactly as on here), EIGRP eval (Exactly the same as on here)
5 D&D, DMVPN componants, TTL and Fragmentation, Copp and MPP, Exhibit scenario with frame-relay, and a new one about snmp manager.
All you need is one this site.

Thanks Digitalhut

Which action can you take to mitigate unicast flooding in a network?

A. Configure VLANs to span multiple access-layer switches.
B. Implement a nonlooped network topology.
C. Set the ARP timer value to less than the CAM timer value.
D. Set the CAM timer value to less than the ARP timer value.

Answer: C

Shouldn’t this be B? If there was an option for setting the ARP and CAM table to have the same timer value I believe that would be the answer but these options are just less than and greater than.

Which task must you perform to enable a point-to-point Frame Relay connection?

A. Enable inverse ARP.
B. Configure the encapsulation type.
C. Configure static address mapping.
D. Disable inverse ARP.

Answer: C

From here: http://www.ciscopress.com/articles/article.asp?p=170741&seqNum=6

The command can be executed without specifying the Frame Relay encapsulation type to be used.

On point-to-point subinterfaces, you do not need to use the frame-relay map command to perform static address mapping, because it is always assumed that the end point of the point-to-point connection automatically resides on the same subnet as the start point. It is also not required to enable or disable Inverse ARP, because there is only a single remote destination on a point-to-point PVC and discovery is not necessary.

So is it A?

I mean B @ the post above me

hello friends.
passed the exam few secs ago, 97x, and here are my reviews about exam questions

1. July and October Files are both very valid you can use any.

2. the question HQ-R1,HQ-R2 and BR1 with eigrp 100 has changed, now they give you the same topology but different question, the question tells you to predict the routes installed bt EIGRP in HQ-R1 if BR1 is configured with stub command, you can use the same topology we have in TUT.

3. Got about 7 DnD all from this site, AAA, frame relay with diagram, DMVPN, GRE same we have here, except one new DnG question about SNMP which is very simple if you the SNMP basics.

4. The sims where OSPF virtual link, OSPF normal OSPF lab which had a bug, be careful with this lab and also all the IP addresses and process ID have been changed, I also got the EIGRP evaluation lab which had a bug also, in router one never responded the command “show ip route 150.1.6.6” which is used to see the ratio of load balancing in the topology, I was very confident with my commands because in the Show ip int br that was the IP of Loopback 0. be careful guys

5. 90% of the questions are from TUT, the few added are very simple and you should be comfortable with them if you know the basics,

if you have any question just ask I ll be gland to provide support!!!!

Good luck every one!!!

and one more thing, I studied the entire site, putting equal efforts in all questions, I solved all the MPQ and Composite quizzes, all of them, without putting more effort in one section than the other, I am a premium member too

Passed earlier today with 9xx… October dump is 100% valid (take your time and go through every question) … got ospf, ospf virtual link, eigrp eval… almost all questions from the dump… ospf sim is different and one new bgp question…now, don’t panic and study hard.. all the best!!!

@ your savior, where can I find October dump?

++http://www.digitaltut.com/route-questions-and-answers++

More comments like @Nia’s.
Congratulations @Nia.

Thanks @Nia..

@ your savior

congratulation !!

can you please explain more about labs and drag and drop ?

How many questions in total are in this website to prepare for CCNP route only ?

@jolaus

Can you tell me something about the DnD on SNMP my exam will br oct 28

thank you

Hi there,

Passed exam today with score 9xx. It was harder than I expected.
I had 55 qestions, OSPF IPv6 virt link sim, EIGRP Eval sim and new OSPF stub lab, more than 5 DnD (without SNMP,DMVPN, frame relay with diagram, TTL, I’ve not seen before AAA acounting commands (network,connection,exec,resource,etc)). I’m not a prem member so I saw a lot of questions that I haven’t seen in October Dump (maybe because I didn’t read the questions after page 205). I learned Oficial Cert Guide, July and October Dumps and labs from TUT.
About the OSPF stub lab, we have 3 routers (for example A,B,C, names actually other), 2 of them are parialy configured, we have to config router A as totaly stub (no type3, type5 LSAs), I did partial config on router B to make totaly stub area. I didn’t find any bugs like Nia mentioned. The same for EIGRP Eval, I was able to check ip route for R6 loopback on R1.
I would be glad to help somehow.
Thanks community. This site definitely helped me pass.

@ NVV

what do mean by ospf stub lab ?
there is no any lab with the name of “ospf stub lab”

Only in “Ospf Sim lab” you have to put the stub commands right ?

Because as know there is another (Stub) lab on this site with the name of “Eigrp stub”

just correct me if I’m wrong. Or kindly shear the Sh run config here.

@Balu

My bad. Just re-viewed the OSPF sim lab here. I didn’t recognize that it was OSPF sim lab in my case. There were different IPs, areas and router names.

@NVV well done..can u tell us something for TTL DnD..
I haven’t seen something like that

Hey guy I am about to do my CCNP routing and switching exams just for comparison what site are you all studying from.

Can someone please share the last dump? {email not allowed}

anybody, please help with the correct answer?

Which type of Netflow information is displayed when the show ip flow export command is executed?
A. sent status and statistics
B. top talkers
C. export interface configurations
D. local status and statistics

@Nomi

From: https://www.cisco.com/c/en/us/td/docs/ios/netflow/command/reference/nf_book/nf_01.html

show ip flow export
Displays the status and the statistics for NetFlow accounting data export.

So I think D but maybe someone can confirm

Anonymous.

Here is too much confusion about this question, somewhere it’s just showing with Ans A and somewhere D.

What section do we need to review in the digitaltut?
Most Popular Questions
New Updated Questions – Part 5
New Updated Questions – Part 6
Composite Quizzes ???

@greek_guy, TTL it’s DnD not only about ttl, there were 5 terms on the left: ttl, redirect, unreachable and a few else. On the right – actions that router do.

Hi Experts,

Ill be taking my exam on oct 28
can anyone sent me valid dumps?
jersonrhod.cabrera @ gmail dot com

thanks in advance

Hi.

Would someone please send me the latest dumps for 300-101 route exam? Thank you.

vhin088 @ gmail dot com

Hello @JJ

You can check here ++http://www.digitaltut.com/route-questions-and-answers++

Hello @October

Check all of then

Most Popular Questions
New Updated Questions – Part 5
New Updated Questions – Part 6

Also the http://www.digitaltut.com/route-questions-and-answers++.

Hello Everyone!

Passed yesterday!!!! Really close.

55 Quetions. Lasbs:

Labs>>> OSPF, OOSPF Virtual Link and EIGRP EValuation.

4 DnD. AAA, Frame Raly, IPV6 and IPV6 NAT.

I had this question:

All neighbor routers are in the BGP peer group named PEER-1 All passwords are configured as Cisco. These messages are logged to the console of router DSW1 which is peering with router Core. Which two configurations allow a peering session to form between DSW1 and the Core.

4 to 5 new questions, but not a big deal!

I would like to thank digitaltut and the other people. You are the BEST!

@M@nu,

Congrats.

Have you studied all the topics? MPQ, Composite Q, NU5 and NU6? Is there any lab that has changed?

Thanks.

Hello @ JJclemente!

I staudied MPQ, NU5 and NU and ++http://www.digitaltut.com/route-questions-and-answers++.

Also pracitise the labs.

PASS 4 SURE IS FAKE FAKE FAKE

PASS 4 SURE IS FAKE FAKE FAKE

Guys I dont have much time. I am going to take the exam next week. Do you think it is enough to study only MPQ, Nuq 6 and 5 to pass the exam? ( including the Labs )

passed 8xx

2nd time taking
SIMs: ospf sim, EIGRP Eval, IPv6 Virtual Link.

DND: AAA, Frame Relay config
i saw approx 10 questions i didn’t see in the update, but you should be good.

As I said @arkham_knight

I staudied MPQ, NU5 and NU and ++http://www.digitaltut.com/route-questions-and-answers++.

Also pracitise the labs.

Which command will display all the EIGRP feasible successor routes known to a router?
A. show ip routes
B. show ip eigrp summary
C. show ip eigrp topology
D. show ip eigrp adjacencies

Dump says C (but with C command we see Administrative Distance)
I think A is correct answer cause we see Feasible Distance….
Any help?

Any secondary route to a remote network is considered a feasible successor, and those routes are only found in the topology table and used as backup routes in case of primary route failure. You can see the topology table with the show ip eigrp topology command?…?

C is correct

Hi

who says- Eigrp stub sim’s ip addresses the same with a digitaltut lab’?

Has anyone found any question in Oct dump which is wrong answered?

hello guys

anyone have tomorrow exam ?

@daniel

I have exam tomorrow

@nick

good luck you, i have 30 octomber
can you write your score and detail tomorrow ?

@daniel

Thanks…I will write after the exam..

Regarding the redistribution lab, why does it matter if the link between R2 and R3 is ethernet vs serial? Even when R2 to R3 is serial the path from R1 -> R2 ->R3 ->R4 has the most bandwidth. Even then it still doesn’t matter because if R1 -> R2 is serial then the traffic is bottlenecked. Someone in the comments said their version of the SIM had all ethernet links except for R2 -> R4 which would make the most sense. Can anyone confirm?

@ laga

good luck my friend

@Nick
Good luck bro.

Just Passed CCNP Route today with score 8xx.
DigitulTUT Oct dump still valid. a few new questions.

I got 55 questions

3 labs.
1.EIGRP Evaluation Simulator (Same question + topology in this site)
2.OSPF Simulator (Hostname + area + process id had changed but other same.)
3.IPv6 OSPF Virtual Link

DnD
1. Frame Relay LMI extension
2. AAA ( Authen + Authorize + Accounting)
3. IPv6 NAT Charactheristic ( NAT64 and NPTv6 )
4. Frame Relay Component
5. NAT64 (Stateful & Stateless)
6. SNMP (Agent + Manager + GET + SET + MIB) it’s a new question but so easy.

If you read all of OCT dump. You can pass it.
Good luck everyone.

@shisuka

congrats!!!

and tnx for your update