Share your ROUTE v2.0 Experience

Passed earlier 8XX.

Some question was re-worded. Rezza is correct, the topology of one EIGRP question is the same but with different question and selection.

4 DND = FR, IPV6 Characteristics, NAT process for IPv4
3 labsim = OSPF Virtual link, EIGRP eval, EIGRP sim

5 question I encountered not on the oct2019 pdf, but they are easy questions. Just know the logic and idea.

Thanks Digitaltut.

@Ann

Was the SNMP DND Get, GetNext, GetBulk & Response?

Thanks @AHM
I hope everybody here to share their knowledge to achieve our goal

@Rezza: It was like which component do what. I don’t exactly remember all, but it was easy to match it.

Which two statements about the enable secret and enable password commands are true? (Choose two)
A. If both commands are missing from the global configuration, vty lines use the console password
B. The enable secret command overrides enable password
C. The enable password command has a stronger encryption algorithm than enable secret
D. The enable secret command is backwards-compatible with more versions of IOS
E. The enable secret and enable password commands must be used together

Dump says A,B..I THINK B,D any opinions

Sorry guys i checked it….A,B are correct

Hi all,

Passed at the exam 300-101 on saturday.
Score 900
3 labsim = OSPF Virtual link, EIGRP eval, EIGRP sim
A lot of IPV6 Questions
A lot of IGP Questions
2 BGP Questions
SNMP, NAT64, AAA Drag and Drops

@snake
When u say a lot of ipv6,igp questions..
u mean new q,except october dump ??

pass today 851.
all questions in this site.

labs: ospf ipv6, eigrp sim, ospf sim
dng: authentication, frame-relay

Which sim exactly did you mean with EIGRP sim?

EIGRP Stub Simulator, EIGRP OSPF Redistribute Simulator or something new?

I think he means Eigrp eval

Passed recently with 8xx/1000 within 20 points of minimum passing score. Studied MPQs, NUQ5, NUQ6 and all Labsims. Got EIGRP Eval, OSPF, and IPv6 OSPF Virtual Link. About 3-4 D&D. At least 10-12 questions were not on the sections I listed above. Please understand the explanations of each question as many questions were not verbatim from the Digitaltut questions and you will either barely pass or risk not passing at all. Good luck and thank you Digitaltut for the content!

@Snake
@Chewy
@Anonymous
@RR
Did you only see the premium digitaltut ?

Hello Guys,

I filed today as I found many topics are not covered in OCG ( like PPPoE … ) . Many questions from here , but need to understand the subjects .

NAT64 , PPPoE , D&D I am not familiar with all sim from here .

Any suggestion where to find the missing materials from OCG ? What is the official reliable resource ?

Please help

*Failed

@MUSA90
are you a premium member?
all you need is in premium side of this site, just make sure you understand why the correct answer is correct and why the wrong options are wrong do not try to memorize the answers in the exam memorize the logic, very sorry for your failure you re going to make it next time

Consider this scenario. TCP traffic is blocked on port 547 between a DHCPv6 relay agent and a DHCPv6 server that is configured for prefix delegation. Which two outcomes will result when the relay agent is rebooted? (Choose two)
A. Routers will not obtain DHCPv6 prefixes.
B. DHCPv6 clients will be unreachable.
C. Hosts will not obtain DHCPv6 addresses.
D. The DHCPv6 relay agent will resume distributing addresses.
E. DHCPv6 address conflicts will occur on downstream clients.

Dump says A,D…I SAY D,E…right?

@anonymous

I think A and B

From https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/security/d1/sec-d1-cr-book/sec-cr-e1.html#wp3884449514

Caution
If neither the enable password command nor the enable secret command is configured, and if there is a line password configured for the console, the console line password will serve as the enable password for all VTY (Telnet and Secure Shell [SSH]) sessions.

Enable password is backwards compatible to version 10, where enable secret is version 11.

What do you think?

@greek_guy yes D and E

Hi Guys anyone wrote the switch exams recently..this month ?

Pass today score 8xx/1000. thank you digitaltut. exam are mostly from MPQ NU 5 and 6. Read also the route_october pdf.
DND
LABS: EIGRP EVAL SIM, IPv6 OSPF, OSPF SIM

Which two statements about configuring OSPFv3 are true? (Choose two)
A. The OSPFv3 routing process must be explicitly configured and enabled
B. You can configure only one OSPFv3 instance per link
C. OSPFv3 requires network statements for IPv6 prefixes
D. OSPFv3 neighbors must be explicitly identified on NBMA interfaces
E. OSPFv3 interfaces must be explicitly configured and enabled

Which two statements about the enable secret and enable password commands are true? (Choose two)
A. If both commands are missing from the global configuration, vty lines use the console password
B. The enable secret command overrides enable password
C. The enable password command has a stronger encryption algorithm than enable secret
D. The enable secret command is backwards-compatible with more versions of IOS
E. The enable secret and enable password commands must be used together

AB answers corrects!!

@ GQ
Please share the October file to wwdt dot cisco at gmail dot com

Best Regards
WWDT

@Anonymous i will answer A,D ..although E is correct too

hello my exam is approaching can anyone who has done the exam in this week share what he has seen, i will be glad to get a reply, anyone please!!!!
thanks…..

@Anonymous

Which two statements about configuring OSPFv3 are true? (Choose two)
A. The OSPFv3 routing process must be explicitly configured and enabled
B. You can configure only one OSPFvr3 instance per link
C. OSPFv3 requires network statements for IPv6 prefixes
D. OSPFv3 neighbors must be explicitly identified on NBMA interfaces
E. OSPFv3 interfaces must be explicitly configured and enabled

answers>> AD

correct me if am wrong

Any One Have valid Dump VCE
Plz Share
asalihcisco at Gmail

I am going to exam tomorrow. Are the Oct_2019 dumps still valid? Can someone who have take exam in past few days confirm…

What is the oct_2019 pdf everyone talking about? I have premium membership but i can’t see it anywhere.

@Skvok
It is latest dump file. You can find link to Oct_2019 file on some previous comment pages.

Hi all. ¿Do you know if the administrators of this wonderful page are going to open a page like this one but for the new CCNP ENTERPRISE?

A network engineer executes the ―show ip cache flow‖ command. Which two types of information are displayed in the report that is generated? (Choose two)
A. top talkers
B. flow export statistics
C. flow sample for specific protocols
D. MLS flow traffic
E. IP packet distribution
Dump says C,E…I say A,C…correct?

Passed exam today.
oct dumps is still valid all you need is there.

Thanks DigitalTut

Well done @khan…something to share with us….any q except dump?

Did you use the October PDF or just MPQ, NU5, NU6? Seems like there are alot of old questions in the october PDF.

Can some post the link for October pdf please. I can’t see the link on the previous pages.

The best CCNP exam preparation. Help you pass the CCNP exam successfully. Free updates to ensure you are using the latest dump to take the exam.
There are also stable and effective ccna exam questions and answers, a good way to quickly pass the ccna exam

Which routing protocol routes traffic through the best path and second best path at the same
time?
A. EIGRP
B. BGP
C. OSPF
D. RIP
Answer: A or B

B?

There is a new simulation I have not seen here nor can find what the answer would be…

you have 3 routers running OSPF: ABC

You need to fix router A,so it is able to ping router’s C loopback in area 11 but router A cannot receive IA routes nor external routes which is exactly what happens when you configure OSPF between A & B…

Only router A can be modified and you cannot use static routes nor default routes… I tried NSSA area and that made ping impossible and left my router without routes to the loopback, I also configured the router as stub with the same results as nssa… what would you guys do in that scenario… I have not found such lab here nor anywhere else and I ran out of ideas during and after the exam…

@Rezza
Here is the link,
http://www.digitaltut.com/route-questions-and-answers

@?help me i think A

@…. if i understand it correctly….u config in area 11 router A (area 11 stub) and in router B (area 11 stub no-summary)….and it;s ok …right?

Hello Warriors,

Passed exam today.

SIMs: virtual-link, ospf, eigrp eval.
DnD: about 6-7 dnd all are at this ite, one new about snmp manager, agent, MIB etc.. dont remember exactly but if you know basics u can do it.

I think there was about 4-5 new questions and couple of questions here were modified.

Good luck guys and study hard from this page!

Thanks Digitut, worth every penny!

@AHM

Thank you for the link.

I’m not so sure that is valid I have seen a few questions new questions & a few reworded questions not in the dump.

@Rezza
I think it is valid and we are going to see about 5 new questions but everyone has said that they are not a big deal.
I am studying hard just now and labing , I hope that I will sit for the exam at the end of this month.
the only important thing I Believe is not to memorize, u need to study and lab and know the consept then study all the questions then u will be good.

Hey guys , I just passed with 9xx few minutes back . All questions were from this site , only 1 ospf LAB & 1 SNMP DnD was unseen for me but they were easy .

In OSPF lab just need to configure OSPF process on one router & Stub for the Area .
For DnD choice were SNMP Manager, MIB, Agent, etc & right hand side report for host, database, etc.

Now i will start preparing for TShoot…Thanks Digitaltut…

@Rocky
snmp manger , mib ,agent << Where's the information? oct.2019? , Premium tut?

@new dnd,
I didn’t got that DnD in Oct pdf

@Rocky
the ospf lab that u say has the same config as the lab in this site?
area xx stub (in one router) and
area xx stub no-summary (on the other)
and it;s ok?