Share your ROUTE v2.0 Experience

Good morning @frk.

Congratulations.
You would be so kind to share the prepway dumps.

Thank you

Congrat to frk and CLM, do you please remember the SNMP drag and Drop questions?

@frk good to see you passed.

@maybe
The SNMP Dnd asks about SNMP Manager, SNMP agent and MIB

Keith IS FAKE FAKE FAKE FAKE

Keith IS FAKE FAKE FAKE FAKE

@CLM, where can I find that Dnd about Snmp?

@frk congrats on passing the exam. Can you post some questions that you have answered? Just to compare what shows on the dumps that leads you to change the listed answer?

Which BGP option is required when load sharing over multiple equal-bandwidth parallel from a single CE router to a single ISP router over eBGP?

A. eBGP Multipath
B. eBGP Multihop
C. BGP Synchronization
D. Public AS numbers

Answer: A or B???

Passed Today. July/October pdf is valid. In Chinese CCNP (300-101).pdf also ai questions that are not in July/October Make sure you not only memorize but understand the questions… some of them changed in some way but are easy to answer.
There are 4-6 questions I haven’t seen in the pdf but they are easy.

All D&D are in pdf.
The labs were:
Virtual link Ospfv6
OSPF Sim
EIGRP Evaluation Simulation

Thank you digitaltut ….

Congratulation @passed Today
Which Pdf are you talking about?

probably these

https://www.digitaltut.com/route-questions-and-answers

Pass today with 8xx
only studied mcq, part5 and part6.
Sims are valid, dds as well

Hello Guys where i can get Chinese Dump…Please suggest !!!! Thanks in advance..

Hello Guys , Please share Chinese Dump…I have exam next week & i am just running with Digitut Oct dump..

@frk
Can you please share your prepway dumps?
tikeng grace @ g mail .com

For those who just passed the exam
Do we need to add this in the IPV6 real exam???

R1(config)#interface loopback 0
R1 (Config-if)#ipv6 ospf 1 area 0
R4(config)#interface loopback 0
R4 (Config-if)#ipv6 ospf 1 area 54

Just Passed the Exam 9xx! Hallelujaaah

JULY DUMP is your way out! every question except 4 or 5 questions.

I Got EIGRP SIM Eval, OSPF v3 lab (@gtk we don’t need to add those commands),

DND AAA, NAT

Thank you Digitaltut

CBTnuggets and cisco guy BOTH ARE FAKE FAKE FAKE

CBTnuggets and cisco guy BOTH ARE FAKE FAKE FAKE

Passed today 85x/1000

85% from MPQ, NU5, NU6 from the premium membership :
Ipv6
EVN
TCP MSS
PMTUD
NAT(Global,Inside,Outsite)
IPV6 DnD
uRPF
NTP
MULTI-CAST IP6 addr
Frame Relay DnD
New EIGRP Stub Question
IPSLA

AAA DnD
New LAB config Basic OSPF
EIGRP SIM(the same one here)
OPSF virtual link
9 New Questions

Thanks you digitaltut !!!

@n2n Please whats the new Lab? are you the only that got the new Lab?

OSPF SIM:
must be config (R1 and R2) with BASIC CONFIGURATION, with the same topology and digitalhut:

ospf 68 R1 area 30 –R2 area0—R3 area22
just need to ping L0 interface from R1 to R3.
No need to configure stub and stub no-summary.
note:
the copy running-config startup-config —- command is working!

Good Luck!

Does anyone have the dumps: MPQ, NU5, NU6?

@Anonymous

Which BGP option is required when load sharing over multiple equal-bandwidth parallel from a single CE router to a single ISP router over eBGP?

A. eBGP Multipath
B. eBGP Multihop
C. BGP Synchronization
D. Public AS numbers

Answer: A

I think because:

BGP Multipath Load Sharing for eBGP and iBGP feature allows you to configure multipath load balancing with both external BGP (eBGP) and internal BGP (iBGP) paths in Border Gateway Protocol (BGP) networks that are configured to use Multiprotocol Label Switching (MPLS) Virtual Private Networks (VPNs).

https://www.cisco.com/c/en/us/td/docs/ios/12_2sx/feature/guide/fsxeibmp.html#wp1027129

Multiphop is used to increase the TTL value to allow an engineer to use a loopback address instead of an interface address for creating a neighbourship.

JUST PASSED CCNP ROUTE 8XX

6 DND
labs – OSPF SIM(diff ip’s) ipv6 virtual link(diff area), and eigrp eval(word for word)

Digital tut/Chinese dumps were – 90% word for word
Pay attention because some were reworded and had a Extra command in ospf sim that wasn’t supposed to be there

Congratulation @help. Can you please share those new commands for Ospf?
I m taking my exam tomorrow.

Any one please share latest CCNP route 300-101 dumps with me at rahimullah843(at)gmail(dot)com .Thanks in advance

Thanks zainab

Just Passed with 9XX and going for TSHOOT

Thank you DigitalTut

Congrat @anonymous. What came to your exam?

Hi Guys

Failed 3 times now not sure what I’m doing wrong. I have seen all the usual Sim’s (IPv6, PBR, OSPF stub, EIGRP stub). I have seen both OSPF and EIGRP simlets.

Last attempted I was really only 11 points in it, felt like I had it untill that awful “we regret to inform you” message

Please can someone post the latest dumps.

Also my SWITCH expires at the end of november, does that mean I have untill then to do both ROUTE & TSHOOT?

Thanks guys, great site!!

@ Rezza do you have access to premium?

If not sign up & it will help you

I have my exam in 3 weeks

Just passed now 9xx
Thank you digitaltut.
95% from here
One dnd AAA
Lab ipv6 ospf, ospf eigrp eval
Good luck. Next step Tshoot

@Moza

Thank you, I have just signed up. First inspections looks like there are some questions that have changed and some missing.

I’m not seeing the BGP PEER-1 question. and the BR1 HQ-R1 is different I had it in my exam yesterday.

Does anyone have valid Switch dumps? please send them to (Remove spaces)
paynesarah768 @ gmail.com

@n2n @Passed Today
Did you only see the premium digitaltut ?

@David Melanz
what kind of dump is it?

@Gtk
only see the premium digitaltut ?

@ Rezza

from the reply’s from other people it seems no BGP Peer questions where asked, do you remember the question at all?

Which BGP option is required when load sharing over multiple equal-bandwidth parallel from a single CE router to a single ISP router over eBGP?

A. eBGP Multipath
B. eBGP Multihop
C. BGP Synchronization
D. Public AS numbers
http://www.studyccie.com?utm_source=helpyou

I am having my exam in 7 days, can anyone share experience on recent exam changes?, I am a premium member and i have solved everything from this site, I promise to bring vital feedback from my exam after I have taken it. God bless

Just passed All you Need Is here.
Thanks

@ Moza

Posted below mate

There was small bit of out put with it

if you google “All neighbor routers are in the BGP peer group named”

All neighbor routers are in the BGP peer group named PEER-1 All passwords are configured as Cisco. These messages are logged to the console of router DSW1 which is peering with router Core. Which two configurations allow a peering session to form between DSW1 and the Core? (Choose two)

A. Core(config-router)#neighbor 5.0.0.5 peer-group PEER-1 Core(config-router)#neighbor PEER-1 password cisco
B. DSW1(config-router)#neighbor 5.0.0.5 peer-group PEER-1 DSW1(config-router)#neighbor PEER-1 password cisco
C. DSW1(config-router)#neighbor 51.51.51.1 peer-group PEER-1 DSW1(config-router)#neighbor PEER-2 password cisco
D. Core(config-router)#neighbor 51.51.51.1 peer-group PEER-1 Core(config-router)#neighbor PEER-1 password cisco
E. Core(config-router)#neighbor 5.0.0.5 peer-group PEER-2 Core(config-router)#neighbor PEER-1 password cisco

@Moza
@Rezza

All neighbor routers are in the BGP peer group named PEER-1 All passwords are configured as Cisco. These messages are logged to the console of router DSW1 which is peering with router Core. Which two configurations allow a peering session to form between DSW1 and the Core? (Choose two)

A. Core(config-router)#neighbor 5.0.0.5 peer-group PEER-1 Core(config-router)#neighbor PEER-1 password cisco
B. DSW1(config-router)#neighbor 5.0.0.5 peer-group PEER-1 DSW1(config-router)#neighbor PEER-1 password cisco
C. DSW1(config-router)#neighbor 51.51.51.1 peer-group PEER-1 DSW1(config-router)#neighbor PEER-2 password cisco
D. Core(config-router)#neighbor 51.51.51.1 peer-group PEER-1 Core(config-router)#neighbor PEER-1 password cisco
E. Core(config-router)#neighbor 5.0.0.5 peer-group PEER-2 Core(config-router)#neighbor PEER-1 password cisco

>>Answers AC

@ laga

Thank you so much

@Moza
@Rezza
@ laga

I think the right answers are B and D…check the link below

https:// community.cisco.com/ t5/ routing/bgp-peer/ td-p/ 3891379 (without blanks)

@Moza
@Rezza
@ laga
All neighbor routers are in the BGP peer group named PEER-1 All passwords are configured as Cisco. These messages are logged to the console of router DSW1 which is peering with router Core. Which two configurations allow a peering session to form between DSW1 and the Core? (Choose two)
A. Core(config-router)#neighbor 5.0.0.5 peer-group PEER-1 Core(config-router)#neighbor PEER-1 password cisco
B. DSW1(config-router)#neighbor 5.0.0.5 peer-group PEER-1 DSW1(config-router)#neighbor PEER-1 password cisco
C. DSW1(config-router)#neighbor 51.51.51.1 peer-group PEER-1 DSW1(config-router)#neighbor PEER-2 password cisco
D. Core(config-router)#neighbor 51.51.51.1 peer-group PEER-1 Core(config-router)#neighbor PEER-1 password cisco
E. Core(config-router)#neighbor 5.0.0.5 peer-group PEER-2 Core(config-router)#neighbor PEER-1 password cisco
>>Answers B and D

@greek_guy you are right.

greek_guy IS SPAM SPAM SPAM

greek_guy IS SPAM SPAM SPAM

greek_guy IS SPAM SPAM SPAM

There was also new EIGRP question

If you google or ctrl+f on the dumps for BR1 and HQ-R1.

The question had the same topology but a different question.

Any One have valid dump VCE ??

Passed exam today with 8xx.
Most of the questions were from here. Got few new questions.
I think 6-7 DND (almost all from here, got one for SNMP which was new but it was easy).
Sims: OSPF sim, EIGRP eval, IPv6 OSPF virtual sim.
Thanks DigitalTut.
Best of luck guys!!