Share your ROUTE v2.0 Experience

Can anyone confirm that the EIGRP Simlet is back?

Hi, is studing july dump only enough, Thank you.

Does anyone know the 7 new questions that indicatecivileng_bh???

@civileng_bh if the lease time expires on the server while the relay id down when the relay comes back up it will reissue duplicate prefix ranges.

Think this is civilengbh5 other drag and drop on AAA Accounting.

Auth proxy – It returns information about hosts using proxy service
Commands – It returns information about individual EXEC commands and permissions associated with privilege level
Connection – It returns information about outbound communications from the network access server
Exec – It returns information about user EXEC terminal sessions with the network access server
Network – It returns information about SLIP, PPP and ARA sessions
Resource – It returns information about calls that have passed and failed user authentication

There is also some new questions on TTL, ICMP redirect, ICMP unreachable and proxy arp but I do not know any more.

@Yoli @masuga11 @Bojo @zaiba

for new question I mentioned some of them
-for july it will be not enough ,it will be enough if you schedule for the exam from 1st week of posting the dump after that cisco will try to change…

-for me I went through all questions in this site but still there were new questions.

@maybe ..yes dear this D & D was coming in the exam,also it is availiable in digitaltut

@civileng_bh .so you didnt get the usual sim labs? OSPF Eval,OSPF EIGRP redis and PBR?
Can you pl elaborate on the labs you got ?

Can anyone confirm labs seen for this month?

Hi,
I have just passed the route exam with 8xx.I got 2 D&D (AAA and the other one) and 3 Sim (ipv6 ospf virtual link,ospf sim and EIGRP evaluation.)For EIGRP evaluation ,show ip interface brief was not able to use.Then I used sh run command to get R6 loopback interface.In OSPF sim ip address and ospf process id changed.Found about 10 multiple choice new questions.Thanks Digitut and friends from this forum.

@civileng_bh are the sims same as the ones in this page and july dump?

passed also today same exam i got with jk lot of new question

Passed today. Second attempt. Phew…
Same sims as JK mentioned.
Some of them I didn’t even find on digital tut,July pdf or Chinese dumps. But still 85% from digital tut I would say. Get your basics right and you shall pass.
Thanks digital tut and other helpful people on this forum.

@JK , @Route-quest

Congratulation , Do you remember the questions or any of them?

Hi everyone,

I am planning to buy the premium membership to have a better practice of all questions. Please drop a mail if you are interested to buy it too, so that we can spilt the price.

Thanks.
Neiljune1313 at the rate gmail dot com

@IDEAL,
Sorry,I can’t remember the new questions which were never seen in digitut.As mentioned by Route-quest,85% from digitut and you can pass the exam easily.

@JK is the ospf sim this https://www.digitaltut.com/route-ospf-sim …or eigrp-ospf redistribution?

can any1 please confirm what labs do they get in exam????

Let me dig in and remember what questions I encountered.
Something along the lines of –
What redistribution commands are true?
redistribute-internal command to enable redistribution into OSPF (didnt find this on any of the dumps) with other 3 options don’t remember
I got many MCQ’s with firewall ports getting blocked questions
Gre tunnel – IP port 47
RIPv2 – port UDP 520
Syslog – UDP 514

The exhibit for Corre,dhcp,DSW1 and DSW2 but it had 2 options showing interface command and other showing router commands. I selected the one under router command.

Which routing protocol searches for a better route through other autonomous systems to achieve
convergence ?
A. Link-state
B. Hybrid
C. Path vector
D. Distance vector
Correct Answer: C
few OSPFv3 questions

Sims – As of this month, there are new set of sims
OSPF Sim with different router names and ip’s – you need to save the config , it works
IPV6 virtual sim – everything same (make sure to ping the loopback before and after to verify)
EIGRP Evaluation sim- same as here , use show ip eigrp 1 topology as mentioned

D&D – mgre,spoke,hub
auth-proxy,commands,network
frame-relay multipoint
COPP,MPP
all from digital tut

Good luck everyone!
Please feel free to add in JK and others.

Route-quest @

r u sure about the change in the labs ?

Route-quest @ Really? Labs changed?

@zainab
I have got 3 more people other than me who have taken the exam this month.
@JK,@jm,@civileng_bh will agree with me
but make sure to go through all the sims on this website because as you know there is a big pool of questions and sims and it keeps on changing with months.

@Route-quest for ospf sims Seattle Chicago and New York? Seattle ip 192.168.16.5?/30

Routequest – was the names for ospf Seattle Chicago and New York? 192.168.16.x/30 for Seattle

route-quest, was the OSPF sim routers Seattle, Chicago, new york?

@route-quest are you saying there is new sims or just that the sims have changed like the names and IPs? Confused if your saying they are completely different or the same with just elements changed?

Does anyone have all the premium issues on this site on VCE?

@maybe
I have followed this forum for last three months.
All this while the sims were the regular ospf eigrp red, ospf evaluation and PBR. But what I am saying is now they have different set of sim as you read in my last post. All those sims are from here only. Only the names and ips are changed but its easy to figure out. Don’t stress too much and study all of them. Hope you are not confused now. Good luck!

Route-quest ahhh ok I understand now thank you

@Route-quest

Hello

Do the most popular questions and new updated questions part 5, 6 of digitaltut.com enough to pass CCNP Route in the part of single and multiple-choice questions in October 2019???

@Exam next week,
OSPF sim ,It’s exactly that you gave the link.But, OSPF process-id and ip address changed ,subnet mask is still /30. OSPF process-id changed to 79 instead of 1. In the exam question , it clearly mentioned to use OSPF process-id that they provided.
I would like to suggest to practice all the Labs from Digitut .So, no need to worry whatever Labs or Sims come in the actual exam.

@Anonymous

wt labs dd u get???

Alguém tem todas as questoes desse site (premium) em arquivo VCE?

Does anyone have all the issues of this site (premium) in VCE file?

Does anyone have all the questions on this site (premium) in the VCE file?

Thanks @anonymous. But for eigrp evaluation, how do we solve question 2, 3 and 5 if sh run is not allowed?

OSPFv3 Question:

Which two statements about configuring OSPFv3 are true? (Choose two)

A. The OSPFv3 routing process must be explicitly configured and enabled
B. You can configure only one OSPFv3 instance per link
C. OSPFv3 requires network statements for IPv6 prefixes
D. OSPFv3 neighbors must be explicitly identified on NBMA interfaces
E. OSPFv3 interfaces must be explicitly configured and enabled

I think correct anwsers are DE, but in “Route_July_2019” the anwsers are AD

HOW ABOUT YOUR ANWSERS ???

Can you please also have the last valid ccnp 300-101 dump plan for the nex week

@VN

OSPFv3 Question:
Which two statements about configuring OSPFv3 are true? (Choose two)
A. The OSPFv3 routing process must be explicitly configured and enabled
B. You can configure only one OSPFv3 instance per link
C. OSPFv3 requires network statements for IPv6 prefixes
D. OSPFv3 neighbors must be explicitly identified on NBMA interfaces
E. OSPFv3 interfaces must be explicitly configured and enabled

Answer is AD

Hi Bojo,

Please refer below link:

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_ospf/configuration/15-1sg/ip6-route-ospfv3.html

You will find the information:

“In OSPFv3, a routing process does not need to be explicitly created. Enabling OSPFv3 on an interface will cause a routing process, and its associated configuration, to be created”

Thanks

Passed my exam today with 901. Thank you all for the tips.
LAB Sims – OSPF Sim (different IP address but /30, ospf process id 5, area 21).
OSPFv3 IPv6 Virtual Link Sim -exactly the same
EIGRP Evaluation Sim – sh run worked for me.

D&D – AAA auth proxy, frame relay multipoint, mGRE spoke hub, COPP MPP. all from digitaltut.

A few new MCQ questions
default EIGRP – OSPF
the exhibit to limit traffic to DHCP.
path vector question – posted a few entries before mine.

Good luck everyone!

Hi Dear Friends

who can send me new dump? please send for me hikmetcisco @ gmail dot com

@VN perhaps the explicitly configured OSPFv3 process is to give it a router-id because unless you have an IPv4 address the ospfv3 process will not start.

@Anonymous
can you send me dump ? hikmetcisco @ gmail dot com

Which D&D is the Frame-Relay Multipoint?

Failed the route exam today. I think I screwed up some of the D&Ds. I got the labs correct. Back to studying!

EIGRP Eval, OSPF SIM, IPv6 OSPF Virtual Link Sim were on my exam
The stub no-summary stumped me on the OSPF SIM but I eventually got it.

D&D – NAT64/NPTv6, AAA, Frame Relay with SVC, LMI, DLCI, PVC, FECN

Passed the exam. I want to verify some answers and looking for a good dump.
If anyone wants to share please email me at metalserbia @ gmail . com

There was one question about enable password and enable secret. None of the answers made sense so want to verify what would be the correct answer.

@ccnp-rambo

whats labs dd u get??

Passed the exam today with 8xx
Encountered 5-6 new questions but rest were from digital tut.
All DNDs came from here
One New DND about SNMP but very easy to answer
got 3 labs : EIGRP eval, OSPF Sim, IPV6 ospf virtual link sim

However i encountered one issue in EIGRP eval for this question

Traffic from R1 to R6′ s Loopback address is load shared between R1-R2-R4-R6 and R1-R3-R5-R6 paths. What is the ratio of traffic over each path?

As per Digital tut – sh ip int brief and sh ip route 150.1.6.6 should have given the answer but none of those commands worked for me. I remembered the answer so I marked it but not sure how else I would have got the answer. rest all questions from labs worked as per Digitaltut.

Thanks Digitaltut off to tshoot now