Share your ROUTE v2.0 Experience

you are the man, Dexter
best wishes for you
from VN with love

@dexter many congratulations on your success.

Further can you mention those 3 questions whos answer are not correct so that we will try to verify them …

Other than a working EIGRP configuration, which option must be the same on all routers for EIGRP

What should be the answer password or time?

Please send me latest dumps, fam.
goyox1989 @ gmail . com

Congrats Dexter i am happy for you. You have done a good contribution for this forum. If you can identify the 3 questions you mention it will be easy. Adrian, looking for your passing.
Good luck to all of the members and advanced HAPPY NEW YEAR.
MMMexpert

Is 470Q still valid?

@Dexter

Can you send me the dump which you used to get through this exam
THUSHANPRAMOD AT G MAIL DOT COM

@dexter
thanks so much for sharing! greatly appreciate it.

I hope nothing change until end of January 2018…

Hey everybody,

1.

BorderRouter(config)#route-map pbr permit 10
BorderRouter(config-route-map)#match ip address 101
BorderRouter(config-route-map)#set ip next-hop 10.1.101.1
BorderRouter(config-route-map)#exit

BorderRouter(config)#route-map pbr permit 20 ******
BorderRouter(config-route-map)#exit
BorderRouter(config)#int fa0/0
BorderRouter(config-if)#ip policy route-map pbr

———————————————————————–
2.

BorderRouter(config)#route-map pbr permit 10
BorderRouter(config-route-map)#match ip address 101
BorderRouter(config-route-map)#set ip next-hop 10.1.101.1
BorderRouter(config-route-map)#exit ******

BorderRouter(config-route-map)#exit
BorderRouter(config)#int fa0/0
BorderRouter(config-if)#ip policy route-map pbr

WHİCH ONE TRUE ?

@ikra1349

2 is correct

I will go with first with permit 20 also
Dexter what is your comment

hi all,
i need the updated questions for answers on on the site (https://www.digitaltut.com)
kindly send it to me on : {email not allowed}

on#ihab_gamil@hotmail#com

Congrats Dexter on your success

How many Drag n Drop questions are being asked in the exam? Is there a way to know which all they’re asking like we know the sims or is it highly unpredictable?

Coz I see there are 30+ DnD questions in the dumps. Would have been easy if we know which all to focus. Any intel on this, please update team. Thanks

@Ikra

Use this one. As long you can generate the 9 packet in the test workstation that would be ok

BorderRouter(config)#route-map pbr permit 10
BorderRouter(config-route-map)#match ip address 101
BorderRouter(config-route-map)#set ip next-hop 10.1.101.1
BorderRouter(config-route-map)#exit ******

BorderRouter(config-route-map)#exit
BorderRouter(config)#int fa0/0
BorderRouter(config-if)#ip policy route-map pbr

Passed 9xx
thanks to digitaltut procyber lunchi irrelevant apart from the new questions people referring in the previous pages i manage to remember them they are as follows:-
Question 1
Which two statements about NHRP in a DMVPN environment are true? (Choose two)
a. It requires each endpoint to have a unique network ID
b. It routes traffic through the tunnel
c. It can identify PIM-SM RPs over a tunnel
d. It can authenticate VPN endpoints
e. It provides address resolution to route traffic
answer: D and E
———————————————
Question 2
Which two commands do you need to implement on the CALLING router to support the pppoe client ? (choose Two)
A. peer default ip address pool
B. mtu
C. bba-group pppoe
D. pppoe enable group
E. pppoe-client dialer-pool-number
answer: B and E
———————————————
Question 3
what does radius server combine ?(choose two)
A) telnet
B) authentication
C) accounting
D) authorization
E) SSH
Answare:BD
———————————————–
Question 4
What from the following can cause an issue for URPF? (this could be single answer or multiple choice)
OR
Reasons why urpf may fail:
A.Assymetric routing
B.Cef not enabled
C.Urpf not applied to the traffic source
D.If it is used as ingress filtering
Answer:A
————————————————
Question 5
In which scenario can asymmetric routing occur?
A. active/active firewall setup
B. single path in and out of the network.
C. active/standby firewall setup
D. redundant routers running VRRP
Answer: D
———————————————
Question 6
Refer to the exhibit. How can you configure a second export destination for IP address 192.168.10.1?
A. Specify a different TCP port
B. Specify a different UDP port
C. Specify a VRF
D. Configure a version 5 flow-export to the same destination
E. Specify a different flow ID
Answer: C
————————————–
Question 7
Configuration snippet that looks similar to this:
ip access-list 1 permit xx xx
ip nat inside source list 1 int fa0/0 overload
What is this an example of?
A. static NAT
B. something about the ACL
C. PAT
D. dynamic NAT
Answer: C

rest all of the questions were from procyber and simulations were from digitaltut. the new questions were from my post above.

@ikra349 the 2nd one is more correct as the question ask us to forward http traffic through frame relay network.

congratulations rob..

I need procyber material.If you pass on to wellwisher.0683 at gmail dot com

Congrats rob. Thank you for all the information.

hi guys,
which is dump still valid? Procyber dumps? Can you share the link?

@cred, what are you doing in that group???

Hi Rob121,

Other than a working EIGRP configuration, which option must be the same on all routers for EIGRP

What should be the answer password or time?

Is there a lot of IPv6 questions on the exam?

Anyone went to the exam today? something changed?

Does Question Mark option work in CCNP Route Exam? [Context Sensitive Help] ?

Passed with a score of 945.
EIGRP AND OSPF evaluation sims
PBR , OSPF and Redistribution lab, had around 3 D&D Q’s . I did see a few questions that were not part of the dump i purchased but i am pretty sure i saw most of them on the dump that Dexter had shared. I dont remember the new questions,but they were definitely on EVN and VPN .
I guess all you need is the dump that Dexter uploaded .

@Integral , Yes the question and the tab does work on the Lab simulations. Copy run start just worked on the OSPF sim ,not the rest.

Thanks Fatrat

guys , provide dexter dumps ,, please

https://mega.nz/#F!tNtkSB5A!4Glpa9BrYDbAcAPsbtmDjA

Here are dumps and everything else you need

Hi,

Can someone please guide me at your earliest convenience that which dumps from the below list are valid and updated as it is very confusing to decide as per different suggestions .

Dexter dumps or IT library or Digital Tut dumps ???

Thanks

@ Anonymous

Go with Dexter’s. And go through all the questions rob121 has posted in this page. All of them were there in the exam

@XYZ, can i have ccnp route dumps, paper date is 20th jan 2018
please help send me link / material abid_maza @ yahoo dot com
please help, looking forward for quick response,

Jackie – you have the dumps from Dexter a few comments up. Just read the thread.

Hi guys,

I have vce Procyber version 1.5, is it still valid? Other thing, Do you have any vce version because I have one that fails when I try to save an exam session.

Thank you very much

Use Dexters dump, few coments above, on mega, you have there vce pdf player sims

@Dexter

Is 450q Dump valid?
Same as the mega

Hi Guy which is 1 correct for D&D 9tut or Procyber v1.5 how they write.

passed today with 89x marks

all mcqs and drag and drops from digitaltut

labs
redistribution
eigrp evaluation
ospf evaluation
ospf sim
pbr

thanks digitaltut. No need to look anywhere else guys!!!

Please send me the lastest dumps for CCNP Route. Are all the questions coming from the dumps only? I need to write the exam within 10 days. Please help me. if you passed exam, please share the dumps with me too. Thank you in advance.

Hi. Please send me the lastest dumps for CCNP Route. Are all the questions coming from the dumps only? I need to write the exam within 10 days. Please help me. if you passed exam, please share the dumps with me too.

Please share the dumps and labs with me 300-101.
eneshfernando at hotmail . com

Hi All,

Happy new year !!

please share CCNP route VCE file.

thanks

So anyone who has passed in the last couple days, would you agree dexter > procyber? I have both…just want to be accurate.

Hi All. Please give me link to download ios (c2691-adventerprisek9_ivs-mz.124-15.T12.image). I want to open SIM file that was shared by Dexter. Thanks in advance

what will be the right answer

Which two reasons for IP SLA tracking failure are likely true? (Choose Two)
A. The source-interface is confgured incorrectly.
B. The destnaton must be 172.30.30.2 for icmp-echo.
C. A route back to the R1 LAN network is missing in R2.
D. The default route has wrong next hop IP address.
E. The threshold value is wrong.

AC OR BE ???

Hi All,
may I kindly ask you to share procyber dumps ?
I’ve read the previous pages but I cannot find it.
Thank you

Hi all,
one question about d&g BGP attribute : 470q question 89 I think the right answer is w/local/as/originate/Med as i can see in ROUTE 300-101 K.WALLACE Book

ANY IDEA ?

thanks
happy new year !