Share your ROUTE v2.0 Experience

Where can i get the CCNP secirty page

certprepare.com for SWITCH
networktut.com for TSHOOT
voicetut.com for CCNA Voice
securitytut.com for CCNA Security
rstut.com for CCIE Written & Lab
dstut.com for CCDA

Hi guys who share the available DUMPS? please sen my email ciscsoria***@gmai***l.com***

how i can get that DUMPS?

Answer B below appears incorrect to myself. This is a Point to Point configuration where there is not multiple end points over a frame relay Cloud as the question states its PTP. Using 2 DLCIs to connect to multiple end points is either a point to multipoint or a multipoint to multipoint. The correct answer appears to be D as a map is not required because the subinterface subnet mask is utilised with the DLCI to not require a map.

Can some one explain?

Which two statements about Frame Relay Point-to-Point connections are true? (Choose two)

A. Changing a point-to-point sub interface to a different type requires the device to be reloaded.
B. They use two DLCIs to communicate with multiple endpoints over the Frame Relay cloud.
C. The device can establish a point-to-point connection to the cloud without a DLCI.
D. They can operate normally without a DLCI map.
E. Each physical interface that extends to the Frame Relay cloud can support a single SVC.

Answer: A B

Hi guys, how i know about digitaltut?

Please, Can somebody pass me the dumps?
vas gogo @ h o t m a i l doc c o m

I just complete the exam with 8xx/1000.

LABs: PBR, EIGRP-OSPF redistribution (with ethernet between R2-R3), OSPF Evaluation sim
D&D (7Q) – AAA, radius, tacacs+, unicast flooding, asymmetric routing

As someone pointed above there are some new questions, but they actually not completely new, those questions and options some how related to dumps, but they completely change the way they ask.
Other than that Digitaltut is enough to pass.

Happy reading! and All the best :)

Team, am taking my ROUTE exam for the forth time this Friday. Last week Friday, i got 74x and so could not make it though the exam was not that hard. I do not understand how they mark. Wish me luck team. Any hints from recent takers welcome. Thanks @CCNP_Route_Pass for those hints

Best of luck @Kokane

@ CCNP_Route_Pass
which of the dumps did you study with?

Hi everyone, just took my route exam about 20 mins ago
85x
no new Q’s all drag N Drop on here (I only got three and def got one Wrong, I lost concentration on that one)
Usual Sims.
Fellas don’t fret…. cover all the content on digital Tut, No need for any other dumps.
But learn the NUQ5 and 6 and MPQ’s. all Q’s were from there I think.
Literally no surprises. Differnt IP’s on the redistribution sim.
Do not listen to anyone saying there are lots of new Q’s, they clearly didn’t study here enough or just straight up trying to spook you into buying some DUMPS. YOU DO NOT NEED ANY OTHER DUMPS!!!! god speed ladies and gents.

i have to finish studying for route and then i will revise the q’s and use this site.

i stopped studying and need to start cramming so i can pass by late august so i can do tshoot.

PLEASE HELP ME!!!!

Which routing protocol routes traffic through the best path and second best path at the same time?

A. EIGRP
B. BGP
C. OSPF
D. RIP

What should be the correct answer?? A or B??

@Workingrouter The link you provided is giving me invalid format when trying to open the pdf
https :/ / ***www. mediafire.com/f ile/ 4od833l6ow5604l/ ROUTE_July_2019.pdf – Remove 3 stars * and spaces.
Could you please provide a working link?

@ need some help – A is the right answer

Anyone has issue with signing in to their premium account? Mine started since yesterday? How to contact the admin about the issue?

A network administrator is attempting to configure IP SLA to allow one time stamp to be
logged when a packet arrives on the interface and one time stamp to be logged when a packet
leaves the interface. Which IP SLA accuracy tool enables this functionality?

A. Trap
B. RTT
C. Responder
D. Trigger
E. Logging

Answer: C or B

which is true guys ? B or C ?

Which certs website is better preparation and pass Cisco certifications,

Crack4sure.com
Exact2pass.com

@ CCNP Answer is C : Responder

thank you bro

and new question ;

QUESTION299
whichtwo statement about GRE tunnel interfaces are true?(choose two)

A. Atunnel can be established when a source the source interface is in the up/downstate
B. Atunnel Destination must be Routable, but it can be unreachable
C. Toestablish a tunnel the source interface must be a loopback
D. ToEstablish a tunnel the source interface must be up/up state
E. Atunnel destination must be a physical interface that is on up/up state

CorrectAnswer: BD or BE ?

@Hammy, you’re totally right. B is wrong for sure.

@MT I agree that your answer on page 25 is correct. The question asks for 2 “standards” and the distribution layer is not a standard as such. MPLS appears to be a much better fit to the question of how you use a WAN standard to provide remote site connectivity.

which two statement about GRE tunnel interfaces are true?(choose two)

A. A tunnel can be established when a source the source interface is in the up/downstate
B. A tunnel Destination must be Routable, but it can be unreachable
C. To establish a tunnel the source interface must be a loopback
D. To Establish a tunnel the source interface must be up/up state
E. A tunnel destination must be a physical interface that is on up/up state

Answer: BD

https://www.cisco.com/c/en/us/support/docs/ip/generic-routing-encapsulation-gre/118361-technote-gre-00.html

Please contact me if you need {email not allowed}

Please contact me if necessary.

Hi! I wanted to say huge thank you crack4sure.com for valid dumps.
Passed my 300-101 exam today, the dumps are very valid

Guys do you have july dump

A stable and effective Cisco dump, providing dumps of various subjects including CCNA, CCNP, CCIE, and CISSP dumps. Please contact me if necessary. I will contact you as soon as possible. Please see my name

Please send me latest dump
please see my name to send me

Please help me! where is the dump link in the forum.

All links are not working.

@gulf i think the links expired. They were only active for 14 days

Failed 610/1000

Passed today!
Only 2 or 3 new questions, all the remaining from MPQ, NUQ5 and NUQ6.
Labs, Sims and DD also were the same as here. Premium suscription worth every dollar!

@gulf send me your e-mail address. I’ll send you the June dump. I’m still studying for the exam, so not sure if it is 100% valied or not

How many questions (questions + D&D + lab) do Premium suscription have?

@anon no need for fr route map command on ptp links as its known from the interface. D is right answer.

http://www.ciscopress.com/articles/article.asp?p=170741&seqNum=6

Hi guys!! I passed today 9xx/1000. DigitalTut Premium is valid and enough.
I studied MPQ, NUQ 5/6 and Route 300-101 old questions.

DRAG DROP:
-Statements about NAT64
-CoPP/MPP
-IPv6 Traffic filter
-AAA descriptions
-IPv6 NAT
-Frame-Relay component
-AAA accounting
-ICMP redirect

LAB
-Route PBR
-EIGRP OSPF Redistribution (Case 2)
-OSPF Case – OSPF Evaluation

Tks DigitalTut!!!

Real and reliable CCNA, CCNP, CCIE and CISSP dumps, the topics on the dump will be seen again in the exam. As long as you remember the dump keywords, you can pass the exam with one try. If you have any questions, please contact my Gmail. Please see my name to get my Gmail. I will do my best to help you.

Passed CCNP Route with score 92X/1000

4 Drag and Drop FYI: frame relay, ACL, AAA, DHCPv6.
Labs: eigrp case, eigrp stub, route-map
REDISTRUIBUTE , OSPF STUB , IPV6

Without 1 star**
https:/*/ml.tc/o6
just Finish the 1 **

Answer B below appears incorrect to myself. This is a Point to Point configuration where there is not multiple end points over a frame relay Cloud as the question states its PTP. Using 2 DLCIs to connect to multiple end points is either a point to multipoint or a multipoint to multipoint. The correct answer appears to be D as a map is not required because the subinterface subnet mask is utilised with the DLCI to not require a map.

Can some one explain?

Which two statements about Frame Relay Point-to-Point connections are true? (Choose two)

A. Changing a point-to-point sub interface to a different type requires the device to be reloaded.
B. They use two DLCIs to communicate with multiple endpoints over the Frame Relay cloud.
C. The device can establissh a point-to-point connection to the cloud without a DLCI.
D. They can operate normally without a DLCI map.
E. Each physical interface that extends to the Frame Relay cloud can support a single SVC.

Answer: A B

I actually am sad to say Ive failed twice. A ton of questions were new, ive been hearing they use a lot of the old route questions as new ones. The labs were the same but different IP addresses.

Sorry @Hurdor.. Next time you will make it. Just study harder. I am going to make my 4th attempt over the next hour. I was very upset when i failed the 3rd time last week Friday. So i decided to immediately resit. I have just been using digitaltut and revising all the questions.

Is the dumps found in ROUTE FAQs & Tips #15 still valid for the route exam?

@hurde , which dump u use ? please send me your email and i will send u lates dump 100 dolar i buy so we will keep in touch

Please @hurder send me the latest dumps. I am having a hard time finding them villarama . alain @ gmail . com **Please remove spaces

@Lee where i get the MPQ, NUQ 5/6 and Route 300-101 old questions. please help me my exam coming Monday.

Is NUQ 5 NUQ 6 available in JULY File???

Hello team, I am going into the exam now. Will update after 3 hours. This is the 4th attempt. I relied only on digitaltut. Been studying over past days and basically have gone through 90% of the questions. Wish me luck

@Kokane all the best