Share your ROUTE v2.0 Experience

I will take my exam in 3 more hours. I’ll let you know how it goes when get back home.

Do someone have new version of VCE file?
If yes, could he/she upload it please

@CiscoR what dumps did you use to study?

@bigboy he posted a lot of dumps that he used a couple of page ago.
Question :
TCP traffic is blocked on port 547 between a DHCPv6 relay agent and a DHCPv6 server that is configured for prefix delegation. Which two outcomes will result when the relay agent is rebooted? (Choose two)
A. Routers will not obtain DHCPv6 prefixes.
B. DHCPv6 clients will be unreachable.
C. Hosts will not obtain DHCPv6 addresses.
D. The DHCPv6 relay agent will resume distributing addresses.
E. DHCPv6 address conflicts will occur on downstream clients.

Answer is supposed to be A and D.
To me “D” sounds like a wrong answer.
The chinese dump says the answer is “A” and “E”.
What am I missing?
Thank you!

I passed the 300-101 exam with 896/1000 today.

The experimental questions focus on ospf case, eigrp redistribution and route-map. After reading so many test reports, these questions are taken; the IP of the parameter is exactly the same as the answer to the question bank. The second question of the ospf case I saw other people also encountered. The same question, options B, C are correct, of course, according to the answer to the question bank, there is nothing to entangle;

https://itpass.tumblr.com/post/185910790575/the-latest-it-certification-exam

Did the exam today, passed 839/790, thanks God.
Labs: PBR on http, OSPF evaluation and OSPF/Eigrp redistribution.
Drag and drops (around 5 questions).
55 questions in total.

Please can someone share the chinese dump

failed it twice in the last 3 weeks. Felt like a different exam this 2nd attempt. I needed to improve by 20-30% to pass but nope, didn’t get it.

The SIMS here are great and worked in exam. Got PBR, ospf eval, Redist. Some drag and drops I havent seen before. The multiple choice questions felt totally different, studied updated 5 and 6 also most popular just no where near enough to pass.

Passed the exam with 937/790!!! I got OSPF Evaluation, OSPF/EIGRP Redist and PBR.

Got a lot of drag and drops, they were as follow:

Two of AAA, one about Radius and TACACS+ and the other was this:
Auth-proxy: It returns information about hosts using proxy service
Commands: It returns information about individual EXEC commands and permissions associated with a privilege level
Connection: It returns information about outbound communications from the network access server
Exec: It returns information about user EXEC terminal sessions with the network access server
Network: It returns information about SLIP, PPP and ARA sessions
Resources: It returns information about calls that have passed and failed user authentication

The other Drag and Drops were these:

Frame Relay (the one with SVC, PVC, DLCI, LMI, etc.)
CoPP and MPP
ACL (Dynamic, Reflexive, Standard, etc.)
NAT64 (Stateful and Stateless)
DMVP (hub, mGRE, spoke and NHRP)
Cisco IOS DHCP relay agent configuration commands
Cisco Express Forwarding adjacency types

I got like 4 new questions about some commands but I can’t remember them but they were not hard to figure out as the answer had the same wording that the question so was just reading and having a little of common sense. 98% for me was here from digitaltut, Chinese, Dexter, NU5 and NU6. Don’t be afraid or discouraged, the exam is not that hard if you study what is available here.

For any of you that need them, here are ALL the dumps I studied from and passed. Also use digitaltut site, very recommended:

http://www.mediafire.com/folder/ds99ccsu2ravgyy,xchxdxvqyasa92z,8d7tjnrqmfvaqxd,54e6kk6501q1ebo,uxoo6fb8d2ad2b8,8qqcmj73gnsth0h/shared

The link will be available for 14 days because the account is a free one. So please re-share afterwards for those who need them also.

@CiscoR which D&D and Labs you did in your exam?

@JD

I did OSPF Evaluation, OSPF/EIGRP Redist and PBR.

Did a lot of drag and drops, they were as follow:

Two of AAA, one about Radius and TACACS+ and the other was this one:

Auth-proxy: It returns information about hosts using proxy service
Commands: It returns information about individual EXEC commands and permissions associated with a privilege level
Connection: It returns information about outbound communications from the network access server
Exec: It returns information about user EXEC terminal sessions with the network access server
Network: It returns information about SLIP, PPP and ARA sessions
Resources: It returns information about calls that have passed and failed user authentication

The other D&D were these:

Frame Relay (the one with SVC, PVC, DLCI, LMI, etc.)
CoPP and MPP
ACL (Dynamic, Reflexive, Standard, etc.)
NAT64 (Stateful and Stateless)
DMVP (hub, mGRE, spoke and NHRP)
Cisco IOS DHCP relay agent configuration commands
Cisco Express Forwarding adjacency types

I got like 4 new questions about some commands but I can’t remember them but they were not hard to figure out as the answer had the same wording that the question so was just reading and having a little of common sense.

Also, in Policy Based Routing Sim, there was something slightly different:

The next hop IP address (ISP1 in sim here in digitaltut) was 10.1.101.2 in my exam sim and not 10.1.101.1 as in the sim here.

please someone send me latest dump (diamond.(iron9999)@(gmail).(com) please remove ()

Dear CiscoR , files are not showing in link which you are posted request you to help in this….Thank you…

I passed the 300-101 exam with 901/1000 today.

D&D
ACL (Dynamic, Reflexive, Standard, etc.) and more
OSPF Evaluation, OSPF/EIGRP Redist and PBR.

Cisco R , how did you save your labs ? or did you not . Thanks

Hi All.
I am planning to do route exam in mid July.
Pls some one send me valid dumps to
{email not allowed}

Hi All.
I am planning to do route exam in mid July.
Pls some one send me valid dumps to
(erjnaveenkmr)@(gmail).(com). Pls remove()

Check the forum Certcollection u. can find vce file there

@Naresh, please try again, I just tested the link and t works, I saw there have been more than 20 downloads for each of the files, there are 6 in total. Check your browser and cookies.

@Racko I tried running the commands “write” and “copy running-config startup-config” and none of those commands were accepted. The simulations don’t need to be saved.

@CiscoR Thanks for the information provided.

Someone who did the exam twice, can provide their experience to know if the questions and sims were similar or the same as the first chance?

@CiscoR In the PBR sim to test the functionality, you only did the route-map command to seeing the hits in the sh route-map?

and with the Redistribute Sim to test the functionality, you only did ping from R4 to R1?

@CiscoR, do you believe that the file from digitaltut is enough to pass the exam?

@JD Yes I only did the show route-map command and once I saw the hits I just clicked on “Next” to go the following question.

For the Redistribute, since it was the case 2 (Link R2-R3 Fast Ethernet and not Serial) I also ran the traceroute 172.16.100.1 command to confirm it was routed through the path R1-R2-R3-R4 because in the Sim it was requested to use the shortest and fastest path.

@CiscoR, Thanks dude!!!

Someone who did the exam twice, can provide their experience to know if the questions and sims were similar or the same as the first chance?

Just passed the exam with score 876.

Just studied Digitaltut MPQ and part 5 & 6.

Labs EIGRP and OSPF redistribute and PBR and OSPF EVAL.

D&D’s came from digitaltut.

Digitaltut premium worth’s it.

Hi Rock,

Congrats. You did well as the passing score is 790.

I have my exam on this Friday.

@CiscoR and @Rock, do you have VCE application and VCE files for the digitaltut Route-June 2019?

Passed the exam with score 878. Many new questions, about 20.
I only remember about service timestamps log datetime

@CiscoR, may the Almighty Allah Bless you for sharing.

Is there a new version of the file from digitaltut for june? Mine is from April?
What is available with a premium account?

I just saw the file from June, nvm my last comment.
Could someone explain why there’s 2 times as much pages in this file compared to the file from last april?

@ Rock

please can you send me the dump you used at (zendasus)(at)(gmail)(.)(com)
remove the ()

@ Rock

please can you send me the dump you used at (alexanderpetrosky)(at)(yahoo)(.)(com)
remove the ()

@Workingrouter I don’t have any VCE files, only PDF files.

@Wescojay you are welcome.

@netqaq11 if you check the file from June, it contains new and previous questions from the MPQ file.

@CiscoR, thank you. I am currently reading them all. So far so good!

how can i get the june file

For any of you that need them, here are ALL the dumps I studied from and passed. Also use digitaltut site, very recommended:

http : / / www. mediafire . com /folder/ds99ccsu2ravgyy,xchxdxvqyasa92z,8d7tjnrqmfvaqxd,54e6kk6501q1ebo,uxoo6fb8d2ad2b8,8qqcmj73gnsth0h/shared
(no spaces)

The link will be available for 14 days because the account is a free one. So please re-share afterwards for those who need them also.

@CiscoR

You mean there is one 0 extra not missing :D But, thank you for a fast reply! Also, thank you for the link with all the files that you used for this certificate. I will book my exam on Thursday next week, will let you guys know if any new questions come up!

@Belphegor – keep us updated!!

Hey Guys,

Just passed my switching exam and onto the routing one!

@CiscoR, Thanks for sharing your resources – swell guy

Will be keeping you updated about my progress

Hi

Can someone explain to me, please

When answering Drag and Drops in the exam, do we need to put them in order or sequence?

NAT64:
1 Use Network-specific prefix
2 Modify session during translation

NPTv6:
1Modify IP header in transit
2 Map one IPv6 address prefix to another IPv6 prefix

where can i find lab that allows me to do configurations based on the labs from the exam?
something like manual lab practice

did exam and failed 738. SIMs.
EIGRP – OSPF -REDISTRIBUTION
PBR – WEB
OSPF – SIMLET
PPOE packet types – PADI function.
IPv4-Ipv6 –> migration qn –> Ans dual-stack method
3 or 4 qns on netflow . 1.export, and ways to view netflow , 3 . where to export data for long

ntp – port and which stratum ( low or high ) – preference qn
looks like most qns from here & PL. , thanks you.

Hi guys can you share with me CCNP ROUTE COURSE 300-301? many thanks