Share your ROUTE v2.0 Experience

anyone who gave exam this week plz share i have exam tom i ll also share.

10000 100 255 1 150= 1000 100 255 1 150

Renew my CCNP (R & S) for three years more by passed the route exam with 8xx on 23 dec, 2017.

Thanks to digiltaltut.com (BTW, wodering why mostly students mentioning 9tut in comments) and all of you.

100 % exam from ‘Procyber (its me v1.5 1-11-2017) dumps.

1). OSPF Evaluation Sim: same as here, no issue.
2). EIGRP Evaluation Sim: same as here, no issue.
3). Policy Based Routing Sim: same as here, no issue.

4). OSPF Sim: same as here, same concept but required(issue) config on middle(R2) and right side routers(R3), not on left side router i.e; R1 R2 R3 .

5). EIGRP OSPF Redistribution Sim: on R2 and R3# “show int xxx” didn’t work and by ‘sh run’ didn’t show any info about the five parameters of eigrp. (so I used those parameters which I learned on here).

Best of luck to all of you.
“Hope for the best, prepare for the worst “

@rob thanks for clarification

@ talal
congratulations on your success.

Can u share Procyber file

@wellwisher yw mate if you have more dobuts feel free to ask.

doubt*

Guys in EIGRP/ OSPF redistribution, if you are unable to get to show interface x/y(OSPF interface), in EIGRP you can use “redistribute ospf x metric 1500 1 250 1 1500) and it should be ok and easy to reember, good luck to you all

@Talal,
Congrats did you get high 8xx or less than 850.
Did you get all q from that file and are you suspecting any answers.
Wondering why not 9xx
Congrats again on passing your exam
MMM

@ dexter ty for yr files how was yr exam today plz share.

@MMMExpert

If that is the case for my test I will remember those values.

redistribute ospf x metric 1500 1 250 1 1500

@MMMExpert,

Is this a default value 1500 1 250 1 1500?

@Talal

Congrats! BTW, the OSPF SIM, you can check the process ID with other routers?

Thanks

@Adrain you dont need to learn those values you can easily get them by show in fa0/0 or s0/0 in exam.

@Rob

Just in case I cant show the interface for fa0/0 or s0/0 just like what happen to Talal.

@adrain best of luck for your exam mate dont forget to share yr experience here.

@MMMExpert

I think the default values for
serial links is 1544 2000 255 1 1500
fastethernet is 10000 100 255 1 1500

Anyway,

Will update you guys after my exam

Good luck to us!

Good luck Dexter, hope you passed and will be staying here to help us.

1500 1 250 1 1500 are not default but my CCIE friends when studied put those figures when redistributing to EIGRP
Good luck Adrian. Once done give a feedback on what you studied(procyber-vs-Dexter) new files and comments
Thanks

thanks to allah just passed the exam all the questions are from this site and ‘Procyber (its me v1.5 1-11-2017) dumps.
i have got SIMs: OSPF evaluation, OSPF Eigrp redist, EIGRP evaluation and PBR.
All other questions are same as in this site.
please takecare of pbr they changed interface number f0/0 into fa0/1
copy run start comand is not working pbr and Eigrp redist but don’t worry althought it works in ospf sim t

@Dexter , @All
are Dexter dumps include all the questions from “Procyber (its me v1.5 1-11-2017) dumps”?

@ablo did you get high 8xx high 9xx or low 8xx or low 9xx
Did you find any conflicting questions from Procyber dumps.
Congrats on your passing the exam.
MMM

Hey MMM are you studying from procyber or dexter. Also the labs are from digital or the dump ur using? When are you taking the exam? Im looking to take it in next few weeks.

Hello everyone,

Passed today with low 9XX. Nothing unexpected apart from a couple of new questions. Same labs as everyone mentioned in the earlier comments. I would like thank all guys especially Lunchi on page 216-217 he pretty much outlined everything what the labs would look like. Few relevant notes

(1) Procyber 1.5 pretty much covers 99% of the questions
(2) EIGRP-OSPF Redist, OSPF Sim, OSPF evaluation, EIGRP Evaluation, PBR routing
(3) The labs were exact with maybe a single change on OSPF Sim as Lunchi pinted out on page 217 in OSPF evaluation Sim.

I wish you all good luck

QUESTION 19
A packet capture indicates that the router is not forwarding the DHCP packets that it receives on interface
FastEthernet0/0. Which command needs to be entered in global configuration mode to resolve this issue?
A. ip helper-address
B. ip DHCP relay
C. service DHCP
D. ip forward-protocol
Correct Answer: A
Not sure if this is correct or answer is C

@Panda, one of my buddy is taking exam so i am helping him by studying together. I am already done the certs

@Kira congrats any conflicting answers you used than Procyber/Dexter or same one as Procyber. Did you study digitailtut PDF in member zone too.
Congrats again. Kira can you contact me at mmmexpert at yahoo dot com

@Mmm expert I just studied procyber 1.5 nothing else one which has 480qs and 31 drag and drops. For the labs everything from the site although the commments from some people were helpful as what to expect. lunchis feedback On 216-217 pages detailed enough for me. There were a couple of new questions I don’t remember but most of them were from procyber

Thanks for the update and congrats again on passing

Passed 300-101 route exam yesterday, score 881. Thanks to digitaltut and VCE from Dexter. There is about two new questions under VPN technologies and Layer 3. But can’t remember the questions. Labs are the same as the labs from digitaltut.

@Dexter , @All
are Dexter dumps include all the questions from “Procyber (its me v1.5 1-11-2017) dumps”?

Anyone have the Cisco CCNP library of books on cloud?

@kira ty for sharing mate and congrats on passing. how many new questions did you get ?

@mmexpert QUESTION 19
A packet capture indicates that the router is not forwarding the DHCP packets that it receives on interface
FastEthernet0/0. Which command needs to be entered in global configuration mode to resolve this issue?
A. ip helper-address
B. ip DHCP relay
C. service DHCP
D. ip forward-protocol
Correct Answer: A
ans is a
the dhcp packet is actually a broadcast packet which is created by the client (dhcp discovery) .As router does not forward broadcast packet so we use ip helper-address to forward the packet to the dhcp server.

hey everybody,

Does the question change after the beginning of the 2008 year.After 1 January 2018?

@ikra1349 no one knows that lol.

Passed CCNP route yesterday with 820.

LABS:
Redistribution
OSPF Stub
PBR

Some Multiple choice Questiones are new reamining all are same from Procyber dumps.

@xyz could you recall the new questions which topic where they from thanks for sharing your experience and congrats on passing the route exam.

I think they will not immediately change the topics for January 2018.

I can remember that CISCO is informing if they will add new topics etc

Check here for any update for CCNP as we getting close to 2018
https://learningnetwork.cisco.com/community/certifications/ccnp/route_v2/exam-topics

Looking at the course, it tells me how much CBTNuggets has skipped in their videos and this is the reason I feel Route dumps are so hard cause I see a lot of new topics. I need to study more.

@XYZ congrats :)
can you please send me the file
abdullah.mehboob10 at gmail dot com
thanks

Guys, Passed with 9xx, All questions from Dexter’s dump (there are just 3 questions that have wrong answers)

Sims:

+ OSPF Evaluation
+ EIGRP Evaluation

+ PBR
+ Redistribution
+ OSPF (portland router, ..)

DnD-s

NAT64:
+ Use Network-specific prefix
+ Modify session during translation
NPTv6:
+ Modify IP header in transit
+ Map one IPv6 address prefix to another IPv6 prefix

+ OpenSent: wait for an OPEN message
+ OpenConfirm: wait for a KEEPALIVE or NOTIFICATION message
+ Established: UPDATE, NOTIFICATION and KEEPALIVE messages are exchanged with peers
+ Idle: refuse connections
+ Active: listen for and accept connection
+ Connect: wait for the connection to be completed

Authentication:
+ supports a local database for device access
+ supports encryption
Authorization:
+ specifies a user’s specific access privileges
+ enforces time periods during which a user can access the device
Accounting:
+ not supported with local AAA
+ verifies network usage

+ network-specific stateful NAT64 prefix: IPv6 prefix assigned by an organization
+ NAT64 : supports application layer gateway
+ NPTv6 : translates 2001:1::/64 to 2001:2::/64
+ well-known stateful NAT64 prefix: supports IPv6 prefix 64:FF9B::/96

+ SVC: A circuit that provides temporary on-demand connections between DTEs
+ LMI: A signaling mechanism for Frame Relay devices
+ DLCI: A locally significant ID
+ FECN: An indicator of congestion on the network
+ PVC: A logical connection comprising two endpoints and a CIR

Loose Modes:
+ Supports using the default route as a route reference
+ Requires the source address to be routable
Strict Modes:
+ Able to drop legitimate traffic
+ Permits only packets that are received on the same interface as the exit interface for the destination address

About questions:

It have no point if I post here questions, all came from dump, no new ones

Best of luck to all of you.

https://mega.nz/#F!tNtkSB5A!4Glpa9BrYDbAcAPsbtmDjA

Adrian, here are IOSs

https://mega.nz/#F!nJR3BTjJ!N5wZsncqDkdKyFQLELU1wQ

See you all on http://www.certprepare.com :)

take care guys and ladies

can i have a ccnp switch site like this one

Passed 89x

Dexter thank you so much. I successfully passed switch Today. This is what I got.

SIMS
– OSPF Evaluation
– EIGRP Evaluation

– PBR
– Redistribution
– OSPF (portland router, ..)

– Drag and Drop – Loose Mode/Strict Mode
– Drag and Drop – NAT64/NPTv6
– Drag and Drop – AAA
– Drag and Drop – OSPF states

Thank you Dexter. It was all from your vce. Thank you so much and may god bless you all.