Share your ROUTE v2.0 Experience

I fail i reviewed mpq nq5 and 6 and still seen atleast 8 questions which is not here. Cant remember coz im panicking what a waste! I need to save money again to retake the exam maybe next month.

Please send me the latest dump on my e-mail
ahmad _ 1ah AT hotmail DOT com
Any one please ?

Hi Guys. For PBR Lab, may I know what to expect, commands that could help me? Thanks.

Took the test second time and failed it again. Labs and drag and drop are the same from the website but believe me there were at least 20-24 new questions that I have not seen on this website. I am a premium member and I have studied MPQ, NUQ, NUQ5, NUQ6 along with latest updated questions. Please be careful when you take the test and hopefully this website will have more recent updated question posted here. I studied MPQ1-MPQ10 from this site as well to be at the safe side but I failed. Please don’t waste your money. Cisco tests are well known for failing candidates. I literally know each and every question from this site but still couldn’t pull it off. Good luck to the folks taking the test next.

@Saaein did you study the Composite Quizzes??

@Saaein is fake!!!

Help will be appreciated big time
ivanovsvetozarus(at)gmail(dot)com
Thanks

Gents, I passed today 8**

Don`t listen to these scammers and don`t let the people who failed SCARE you!!!!

Just subscribe for the premium membership it’s worth it, everything you need is here at your fingertips.

Labs: Ospf Evaluation, EIGRP/OSPF Redistribution, and PBR
DnD: IPv6 NAT, FrameRelay & uRPF

I studied everything from MPQ, NUQ 5&6 to the Route 300-101 questions

THANK YOU DIGITAL TUT!!!!!!!

@CCNP

Congrats and thanks for posting the info.

Where did you find the IPv6 NAT, FrameRelay & uRPF dnd in premium ?

Did you see any new questions?

@Aussie Mate

check on your right-hand side the “ROUTE 300-101 section Drag and Drop, Drag and Drop 2.” that`s where you can find them

@ccnp NO, I didnot study composite quizzez, May be that is it that I need to focus on. @Koop buddy failing the test twice will get you as pissed as I am. Stop being a keyboard warrior and start studying some material.

Can anyone send me the last dump at my mail.
ayman_waltercorona60(at)gmail. Com manny thanks guys i apprecatte your help regards

I passed today as well. Maybe 5 MCQ that I had not seen here but this site helped me to make the best guess. All the info you need is here. Thanks DigitalTut!

I passed the exam score 8**!

Is this site enough for to pass? yes!

NOTE-
I got around 7 new questions, if u studied from this site, u can manage those new questions or best guess would work.

NO NEED to worry because those question are not that much bad ones.

i have been visiting this site more than six month.

In the exam i got spare time around 40 minutes. i was rushing even the ospf evaluation which was my first question i couldn’t focus too much.

Lab- ( contextual help is available & short command – tab is working – NO copy running-config startup-config working)

PBR case 2 (router2 have one serial 0/0/0 and fastethernet ). i use show route-map & sh access-list to verify the packet hit.

ospf/eigrp redistribution – > i use the traceroute 172.16.1.100 to verify the optimum path via R3 it works. But telnet 172.16.1.100 didn’t work for me ( can’t remember – sorry guys )

ospf evaluation -> Q2 about R3’s serial link apparently one had point-to-point one side had non-broadcast / some with different timers !! like i said earlier i couldn’t focus panicking since this was my first question thinking i won’t have time. so take u time please.

bgp maximum path was my last question so for fun of it ( best guess – probably the right one ) i selected the maximum path as 1 b’coz by default load balance it use only one path. there was no option to select 8.( options are 1. 4. 6.)

To adjust mtu – there was option to select two answers ip tcp adjust-mss / may be — something like this tunnel path-mtu-discovery and ip bandwidth 56344 . So please visit the cisco site for more details.

what command u need at HUB in order to redirect work.
1. ip nhrp redirect ( this is correct )
2. ip nhrp shortcut ( i selected this b’coz others not the best ones )
3. ip ngrp map
4. ip redirect.

study the all DnD from the site and stateful nat 64!

ipv6 bandwidth-percent eigrp 55 80 command was the correct one! because other values are not correct parameter for example AS different location or misplaced so please study the this command very well.

if i remember i will post later.
If u want to become good network engineer please study the subject then use the site so that u know what you are doing.

Hi guys.
Does anybody from you have vce dumps ?
Could you sent me it to:
1sanigam at gmail com

Thank you very much

Free to share a trusted Cisco exam materials website, it helped me pass the CCNP 300-101 exam and cissp exam, I am very fortunate to choose it, instead of choosing those sites that are cheap but are out of date. If you are worried about preparing for the exam now, please see my name, it can help you

I passed the exam score 8**!

Is this site enough for to pass? yes!

NOTE-
I got around 7 new questions, if u studied from this site, u can manage those new questions or best guess would work.

NO NEED to worry because those question are not that much bad ones.

i have been visiting this site more than six month.

In the exam i got spare time around 40 minutes. i was rushing even the ospf evaluation which was my first question i couldn’t focus too much.

Lab- ( contextual help is available & short command – tab is working – NO copy running-config startup-config working)

PBR case 2 (router2 have one serial 0/0/0 and fastethernet ). i use show route-map & sh access-list to verify the packet hit.

ospf/eigrp redistribution – > i use the traceroute 172.16.1.100 to verify the optimum path via R3 it works. But telnet 172.16.1.100 didn’t work for me ( can’t remember – sorry guys )

ospf evaluation -> Q2 about R3’s serial link apparently one had point-to-point one side had non-broadcast / some with different timers !! like i said earlier i couldn’t focus panicking since this was my first question thinking i won’t have time. so take u time please.

bgp maximum path was my last question so for fun of it ( best guess – probably the right one ) i selected the maximum path as 1 b’coz by default load balance it use only one path. there was no option to select 8.( options are 1. 4. 6.)

To adjust mtu – there was option to select two answers ip tcp adjust-mss / may be — something like this tunnel path-mtu-discovery and ip bandwidth 56344 . So please visit the cisco site for more details.

what command u need at HUB in order to redirect work.
1. ip nhrp redirect ( this is correct )
2. ip nhrp shortcut ( i selected this b’coz others not the best ones )
3. ip ngrp map
4. ip redirect.

study the all DnD from the site and stateful nat 64!

ipv6 bandwidth-percent eigrp 55 80 command was the correct one! because other values are not correct parameter for example AS different location or misplaced so please study the this command very well.

if i remember i will post later.
If u want to become good network engineer please study the subject then use the site so that u know what you are doing.

@ Youki Dumps Reliable Thank You

Thank you Youki

Gents, I passed today 8**

Labs: Ospf Evaluation, EIGRP/OSPF Redistribution, and PBR
DnD: IPv6 NAT, FrameRelay & uRPF

I studied everything from MPQ, NUQ 5&6 to the Route 300-101 questions

THANK YOU DIGITAL TUT!!!!!!!

I just want to ask, does anyone have the latest dumps? please share. I can’t find the OSPF simlet in this site. Can someone share? I’ll take the exam ASAP. HELP!

Any one !!! where and how to get dumps for 300-320 ARCH exam .any help appreciated

anyone share lab sims please forcraig2at gmaildotcom

Guys, can someone confirm is below questions (updated today under New Updated Questions Part 6 section) are the ones which everyone called ‘new’?

Question 11

Drag and Drop

TLL – when reaches ‘0’ drops packets
ICMP Redirect – indicate to host that another route is available for a specific destination
ICMP unreachable – when destination is unreachable when IP is unable to give a packet to destination host due to some problem or issue
? – ?
? – ?

Question 12

How to implement local authentication using a list for case insensitive usernames?

A. aaa authentication login default local
B. aaa authentication login default local-case

Answer: A

Question 13 (incomplete question)

Drag drop about NHRP.

+ ip nhrp shortcut – configured on the spoke which is responsible to rewrite the CEF entry after getting the redirect message from hub
+ ip nhrp network-id – (?)
+ ip nhrp map – (?)
+ ip redirects – are disabled by ddefault on a tunnel interface
+ ip nhrp responder – Specifies which interface the Next Hop Server uses for the NHRP responder IP address
+ ip nhrp nhs – Statically configures a Next Hop Server

Two left choices (at the right-side column) are:
+ Enables NHRP shortcut switching on the interface
+ designates router XXX as the Next-hop server

But they cannot be matched with two rest options on the left.

Question 14

Question about IP SLA deployment cycle. Chose best IP SLA deployment cycle that reduce deployment (Choose four)

A. baseline (network performance)
B. understand (network performance baseline)
C. Understand Quality results
D. quantify (results)
E. fine tune and optimize
F. Update Understanding

Answer: A B D E

========================== New Updated Questions (added on 20th-May-2019) ==========================

Question 15

What are two differences between SNMP traps and SNMP informs? (Choose two)

A. Only informs provide a confirmation of receipt
B. Traps are more reliable than informs because they generate PDUs from the network manager
C. Only informs are discdsarded after delivery
D. Only traps are discarded after delivery
E. Informs are more reliable than traps because they require TCP three-way handshake.

Answer: A D

Question 16

Which protocol sort out of order packet at the receiving end?

A. UDP
B. TCP
C. IP

Answer: B

Question 17

A router in an EVN environment is choosing a route. Which value is given the highest selection priority?

A. IGP administrative distance of the route.
B. Replication status of the route
C. Vnet tag of the route
D. Default administrative distance of a route
E. Lexical value of the source VRF name

Answer: A

Question 18

Which two effects of symmetric routing are true? (Choose two)

A. unicast flooding
B. uRPF failure
C. errdisabling of ports
D. port security violations
E. excessive STP reconvergence

Answer: A B

Question 19

Which difference in the packet fragmentation feature between IPv4 and IPv6 is true?

A. Fragmentation performed by IPv4 Sender and forwarding routers IPv6 only by the sender
B. There is no fragmentation in IPv6 because it uses Path MTU Discovery in order to find the smallest packet size to the destination
C.
D.

Answer: B

Question 20

What are limitations of Stateful NAT64? (Choose two)

A. No requirement on the nature of IPv6 address assignment
B. Lacks in end-to-end address transparency
C. Assures end-to-end address transparency and scalability
D. No state or bindings created on the translation

hello all , could you please send me dump {email not allowed}

hello all , could you please send me dump kolawork @ mail dot com

Hi guys, could anyone send me the latest dump please ( mazin050 at gmail dot com )

Hi All ,would any of you share latest CCNP dumps which should be valid please dont share any Fake content or send through email my email Is : {email not allowed}
would be appreciated
Thanks ,

Hi All ,would any of you share latest CCNP dumps which should be valid please dont share any Fake content or send through email my email Is : m_zahoor314 at yahoo dot com
would be appreciated
Thanks ,

Hello all,

I just passed the exam today with 9xx/1000. I subscribed to digitaltut and studied everything on it over a span of about a couple months. I reviewed all of the new questions (most popular, part 5, part 6), all labs, and all old questions (under Route 300-101) numerous times while learning and refreshing myself with the technologies/protocols.

I had about under 10 questions that weren’t on any of the materials here but got some of them correct due to learning the material while using digitaltut.

Thank you so much for your efforts digitaltut! I will surely subscribe to you Switch and Troubleshoot site as well before I attempt those exams.

@Anonymous

What new concepts did you have on the test?

Please send me the latest dump on my e-mail
ahmad _ 1ah AT hotmail DOT com ?

Could anyone please share it ?

Any please share the Valid dump for god sake!!!

Passed with 8XX/100 some days ago
There are new questions numbering about 10 – 15. Study as well so you can answer correctly.
LABS: PBR, Redistribution and OSPF sim
DnD : adverse network conditions, AAA commands, AAA features
Thank you digitaltut

@blazing

Could you please share the dumps please ?

@blazing can you remember any new questions?

@Zero
Hi
could you please send me the dump on e-mail?
ahmad _ 1ah AT hotmail DOT com

Hi Guys, may I know where did you practice Labs / Sims? Especially PBR, I can’t make it work on my GNS3. Thanks.

CCNP Exam-FEE-DISCOUNT-Voucher Available:
Hi,
CCNA and CCNP Exam Fee Discount Voucher available with DUMPs
Let me know if any one need.

teledeal.uk(at)gmail(dot)com

Please send me the latest dump on my e-mail
G10dra AT gmail DOT com ?

Could anyone please share it ?

Please send me the latest dump on my e-mail

I am preparing for CCNP – route (300-101) & CCNP Troubleshooting (300-135). Looking for latest dumps for the same.

G10dra AT gmail DOT com ?

Could anyone please share it ?

Hi guys,
Can anyone send me the last dump for 300-101 ROUTE, at my mail:
cra6_yd AT yahoo DOT com
Thanks in advance!

Hello,

Can someone send me dump for 3001-101 Router on my email please.

Email: {email not allowed}

Thank you,

Hello,

Can someone send me latest dump for 300-101 Route on my email please.

Mail: mohammad.bantao HOT GMAIL DOT COM

Thank you,

Hello,

Can someone send me a latest dump for 300-101 ROUTE on my email please.

Mail: mohammad.bantao AT GMAIL DOT COM

Thank you,

Hi Ebrahem,

Would you please share me the latest dumps. I want to start learning for CCNP Route part. Thanks in advance.

my email: fredsen87 (at) gmx . de

Hi, could someone send me the latest 300-101 dump please ?
netqaq11 AT OUTLOOK DOT COM

i failll…..677/1000

lab pbr /redistribute/ospf evo

DandD AAA comand/AAA/IPv6 acl/LMI,PVC,SVC…etc

If the communication check passes, is it correct to recognize it as the correct answer?>LAB

Can someone please share these dumps without selling them? Can’t we just help one another without being greedy.

@Blazing

can you please share with everyone where we can find the dumps you studied?

hello,
Can anyone send me the lastest dump for 300-101 ROUTE
jad.farhat90(at)hotmail(dot)com

Thanks in advance!