Share your ROUTE v2.0 Experience

Hello to All
I passed EXAM Today…….. 943 /1000

Dump is super valid 100%

GOT 100% Guaranteed VALID passing Material from below

email:
teledeal.pk at gmail

Can Anyone please send me current dumbs and lab shahrukhsiddiqui42 @ gmail . com

@Dexter

Is it possible we can talk in private?

Hi All,

So for the PBR, we dont need to configure the

route-map pbr permit 20?

@Adrian No
@Joe Yes

@DEXTER best of luck for your exam tom.

Thanks rob, this is my second time

I have updated some stuf, here ya go :)

https://mega.nz/#F!tNtkSB5A!4Glpa9BrYDbAcAPsbtmDjA

Regards from Serbia and happy holidays :)

Hey dexter – i am trying to convert your vce to pdf but its asking me for a password. Do you kno what you set the password as?

Thank you

If not can you please upload all the vce questions in pdf format as well. Very much apreciated.

@Dexter

Please provide your email please.

@Dexter….. the answer is B reflexive. 98% for sure.
Section 3 – Q67

Which type of access list allows granular session filtering for upper-level protocols?

A content-based access lists
B reflexive access lists
C extended access lists

In most dumps answer is C, but I think it is

Dexter Hvala tebe brate! Gospod te poživi!

It should be reflexive..

Coz if you are answering the ACL for DnD the upper level is for reflexive

Hi Dexter,

Going to take exam this Dec. 29. Just want to check how to know the process ID that I will use for the OSPF Simulation? is it provided already in the objectives?

@Dexter, thanks for the VCE
Quick quesitons
what is the difference between Procyper 1.5 Q477 and your Q454 vce file
Did you change any answers from Procyber and removed duplicates
you have spent a good time and thanks on behalf of all members
MMMexpert

@Adrian
Type show ip ospf interface brief
it will tell you what process ID you used or type show run
Good luck for the exam and share the experience
Hope before new year you will get above 900+
MMMexpert

In EIGRP ==> show ip eigrp nei, will give the EIGRP ASN#
In OSPF ==> show ip ospf int brief ==> will give the OSPF process-ID and Area-ID’s.

@mmmexpert when are you planning to give exam? i have exam this saturday.

Hi,

I am referring to this objective for OSPF Sim

Portland’s S0/0 interface in Area 1
Amani’s S0/1 interface in Area 1
Use the appropriate mask such that ONLY Portland’s S0/0 and Amnani’s S0/1 could be in Area 1.
Area 1 should not receive any external or inter-area routes (except the default route).

This one does not indicate any process ID for the OSPF.. That is why i am wondering how to know which process ID should i use.. or in the exam you can do a show run for the routers?

@Dexter

Kindly enligthen us.

Thanks!

@MMM diference is that I have deleted 30 duplicate dnd-s and some other duplicate questions, some corrections separated everything by sections, added some new questions, basicaly thats it :)

@Adrian @MMM

He (you) can also use show ip protocols

i will see is that command suported

but they tell you what is process number

@Dexter

Thanks! All the best! Full mode to pass the test tomorrow!

@Adrian

Sorry I was wrong, too much studying…
They not provide area NO

you use sh ip protocols or show ip ospf interface brief as MMM said but on real exam I dont know what can you use of this two

AAArrrggghhh, I ment process ID

@Joe

dexter0907 @ gmail

Here you guys, who like PDF

https://mega.nz/#F!tNtkSB5A!4Glpa9BrYDbAcAPsbtmDjA

Btw, there is small sections 9. Heavy stuff

That questions I always forget :) then I isolated them :)

@Dexter

Noted on this, will do a show ip ospf interface or show ip protocol on the routers needed to be configure.

Thanks for the VCE.

@Dexter, thanks for the info and good luck in your exam. I hope you will pass with a high score
MMMexpert

sh run is the best in exam because in simulations they might not be supported

@MMMExpert

Thanks! will do check the process ID with the router that needs to be configured with
area 1 stub no-summary

Hi Dexter,

I know you already did a great job helping us.. but can you share also the image for
c2691-adventerprisek9

Thanks

https://protechgurus.com/download-gns3-ios-images/

A lot of cisco router images on the link available for free download

Thank you dexter for the vce. Appreciate the hard work you put in

http://www.mediafire.com/file/p24xt8y159g7x09/c2691-adventerprisek9-mz.124-25c.bin
http://www.mediafire.com/file/a9jcjwxpuavvwxn/c2691-adventerprisek9_ivs-mz.124-15.T12.bin

Does anyone have idea procyber it’s me v1.5 will be still valid until end of January, next month?

Hi, I’m planning to write CCNP Route exam (300-101). If anyone have valid dumps or trusted site to download dumps please let me know. Thanks in Advance.

From Dexter PDF
https://mega.nz/#F!tNtkSB5A!4Glpa9BrYDbAcAPsbtmDjA
for VCE check previous pages please and good luck

Dear Dexter,
I think ur sharing is the best so far. Really thanks a lot, I will start prepare my route exam now. thank you so much and may God bless u.

@dexter the real mvp thanks alot mate i hope you pass with a high score .

Can someone please confirm the answers for the below 3 questions? My exam is in a few hours.

1.How does an EVN provide end-to-end virtualization and separation of data traffic from multiple networks?
A. on the edge interface, with vnet tag
B. on the edge, with 801.q
C. on the trunk, with vnet tag
D. on the trunk, with 802.1 q
Is the Answer A or C?

2. Consider this scenario. TCP traffic is blocked on port 547 between a DHCPv6 relay agent
and a DHCPv6 server that is configured for prefix delegation. Which two outcomes will
result when the relay agent is rebooted? (Choose two)
A. Routers will not obtain DHCPv6 prefixes.
B. DHCPv6 clients will be unreachable.
C. Hosts will not obtain DHCPv6 addresses.
D. The DHCPv6 relay agent will resume distributing addresses.
E. DHCPv6 address conflicts will occur on downstream clients.
Answer: AB Or AC?

3. Which two statements about configuring Frame Relay point-to-multipoint connections are true? (Choose two)
A. They ignore the broadcast keyword in the frame-relay DLCI mapping.
B. They require the same DLCI on each side of the link.
C. Changing a point-to-multipoint sub interface to a different type requires the interface to be deleted and recreated.
D. They require the frame-relay mapping command to be configured.
E. They require inverse ARP.
Answer: CD or DE?

@Emily W
Q1 ans c
Q2 ans a & c
Q3 ans d & e

Other than a working EIGRP configuration, which option must be the same on all routers for EIGRP

Idk if Time or password is the answer?

IMO it should be time.

best of luck dexter.

In a point-to-multipoint Frame Relay topology, which two methods ensure that all routing updates are received
by all EIGRP routers within the Frame Relay network? (Choose Two)

A. Use statically defined EIGRP neighbors on the hub site.
B. Create separate address families.
C. Disable split horizon.
D. Use subinterfaces.
E. Disable EIGRP auto summary.

Ans: A,C or C,D – Which one is correct.

@ccnp route 300-101
ans is c & d
as split horizon is enabled by default in eigrp so we disable it and other way is to have a separate sub interface per subnet and private virtual circuit.

AC

opps sorry it should be C and D

I guess you are reading two materials with different answers

router(config)# ip nat inside source static tcp 172.16.10.8 8080 172.16.10.8 80
Which statement about the command is true?

A. Any packet that is received in the inside interface with a source IP port address of 172.16.10.8:80 is
translated to 172.16.10.8:8080.
B. Any packet that is received in the inside interface with a source IP port address of 172.16.10.8:8080 is
translated to 172.16.10.8:80.
C. The router accepts only a TCP connection from port 8080 and port 80 on IP address 172.16.10.8
D. Any packet that is received in the inside interface with a source IP address of 172.16.10.8 is redirected to
port 8080 or port 80.

answer A or B ???

@wellwisher ans is b