Share your ROUTE v2.0 Experience

I am a premium member of Digital Tut and there is a section called New Updated Question Part 5 and 6. Perhaps this option is not there for non-members?

hello everyone, i was pass yesterday 8xx/100. digitaltut dumps valid some questions have incorrect answers. you must modify some of …
LAB is valid. but i recommend learn more about PPPoE VRF EVN GRE IPv6 config and technology.
new question about GRE config and some answers edited but question still old
i recommend learn well.

Guys, I am about to but premium memberships. Am I going to find there all the dumps file including MPQ, NUQ5 and NUQ6? Are them (with LABs of course) enough to pass current exam?

how many question we have to prepare for cnnp route ?

please share valid cnnp route dumps
kind regards ,
your word

Gosh… guys please stop your spams to send dumps etc… all the things are here, jsut spend some time to research or pay for premium access. Don’t be too lazy and only wait for dumps which no one will send you. Let’s focus on real exam topic here

@Peter
From the posts i’ve seen on here recently, the majority of the MCQ’s on the exam are covered off in the MPQ Composites, NUQ5 / NUQ6. The drag n drops, Simulation and Simlet questions are all valid covered on this site, accessible once you become a Premium Member. This is just from what I’ve been reading on the site anyway, I can’t actually verify that this is valid until I’ve sat the exam myself.

For info, an observation I have noticed when going through the MCQ’s is that I’m seeing duplicates of the same questions but I’m sure sometimes the answers are different for a few of them. Hopefully they have been verified on this site.

@Greeners thanks! One more concern.. do you know if MPQ Composites, NUQ5 and NUQ6 files are accessible for the premium members?

@Peter
Don’t think the questions can be downloaded as files, the simulation questions can be imported into GNS3 though so you can practice all of those. For the MPQ and NUQ5 these can be practiced using Digituts web based simulator. This also applies to the Simulations and Eval Sim questions too.

@Peter
Previous message was mine :o)

@Greeners, great thanks. I will check it there then!

@Peter

I would definitely advise to study all areas as well otherwise you’ll probably will get caught out on some of the questions. Only reason I say that is there are quite a few topic questions I’ve noticed for example NAT64 (stateful vs stateless) where they’ve tweaked the question or answers so that if you don’t know the exact differences between the two, you’ll pick the wrong answers depending on the question. Hope that makes sense.

I have to recommend a trustworthy dump site, the dump I bought on Aimpass, the dumping question is very real, I successfully passed the 400-101 written test, I am happy with this decision I made. I am looking forward to CCIE changing my life.

@gfdgdgasdf, yeah – CCIE on dumps will really change your life… for sure. Man, go away with this spam :/ You missed the site

passed today with 9xx/1000

– SNMP inform v/s trap
– Types of uRPF
– ip nat tcp [ip adddress] 8080 [ip address] 80, what happen in that command? how NAT translate that?
– Lots of IP SLA Questions.
– Same lab
– New DD about AAA but it almost the same
– Like two new EVN questions
– SNMP new questions about how works

Without Stars**
http:/*/ow*.ly/2NXB101z3Nk

18. A route map was configured and it was distributing OSPF external routes?

A. Distributing E1 only

B. Distributing E1 and E2 using prefix lists

C. Distributing E1 and E2 using ACL

D. Distributing E2 routes

I think it is B – Access list is for traffic filtering & prefix list is for route filtering

Hello,

I passed the exam today (985/1000), I got :

– 3 Labs: EIGRP stub, PBR, EIGRP eval
– 6 DNDs: DHCP, adverse network conditions, AAA, Frame-relay component and LMO, TACACS+ACL

All the questions were from this dump (Updated this month with the new questions)

https://www.flipsnack.com/ikikay3/300-101.html

Isabella mother fu**r Fake Fake,,,,,,,,,

Isabella mother fu**r Fake Fake,,,,,,,,,,,

Isabella mother fu**r Fake Fake,,,,,,,,,,,,,,

I am happy with my choice because I chose the dump of the Aimpass test site to help me pass the 400-101 written test very smoothly. Next I will continue to choose the Aimpass dump for the CCIE lab exam. I am now Trust it very much, Aimpasse will help me accomplish my dreams

ww
w.reddit.co
m/user/davis
0519/comments/bh
hz7m/the_latest_ccnp_d
ump_2019/

Dear all,

could you please share latest Route(300-101) dump.
qr(dot)sanda(at)gmail(dot)com

Thanks

passed today with 8xx/1000

Guys dont forget to review old dumps. 300-101 Dexter
Also, the updated questions part 6 availabe for premium member is very helpful.

All lab sims are the same. I got pbr, eigrp eval and simlet.

Just make sure to use old and new dumps to play it safe.

Good luck !!!!

@Aze ,thanks. One question – did you have EIGRP OSPF Redistribution Sim and EIGRP evaluation? Most recent LABs were PBR, Redistribution and OSPF Sim, that’s why I am asking

@Aze

Can you remember any new questions?

@Aze
Do you remember seeing any new D&D’s or were they all covered on Digitut?

@Aze
When you say the ‘old dumps’, are they covered in the ‘Most Popular Questions’ section on Digitut?

Thanks for the advice

@ pete. Sorry it is actually Eigrp ospf redistribution, pbr and ospf simlet. Not eigrp eval. Those are the lab sims tha i got a few hours ago. Nothing has change in terms of lab sims. Just study all the lab sims posted here and you will be fine.

@ zero zero. Yup , inspite of reviewing both old and new dumps. There are still
New questions. Most new stuff are about bgp and snmp. D&d are the same. I got acl,dhcp, and AAA.

@ greeners. Nope, they are not covered in mpq. Also, the updated questions part 5 and 6 for premium member is very helpful.

Just play it safe and review the old dumps.

Goodluck Guys!

Looking forward to see you comment in here tha you pass the exam as well.

Next up ccnp switch.

@Aze, thanks and wish you good luck with CCNP Switch. Do you thing premium membership, digitaltut site and Route_March_2019 pdf file form this site is enough to pass?

Hi All,

can anyone advise if we have VCE file for route dumps on here if anyone had shared vce file previously on here please let me know would really help to prepare for route exam if anyone have dexter VCE file ???

Please No spammers.

Thanks guys.

@Aze
So are the Old Dumps not accessible on Digitut (for premium users)?

Thanks for your advice. Good luck with the switch exam! Switchtut will help you for this :o)

Hi all,

Just cleared my switch last week can anyone advise if we have VCE file for route dumps on here if anyone had shared vce file previously on here please let me know would really help to prepare for route exam if anyone have dexter VCE file ???

Please No spammers.

Thanks guys.

Hi all,,

can someone share a simulator for vce files that works well?

Gusy, where to find NUQ5 and NUQ6? Thanks

Guys*

@Peter the answer is Premium membership

New 328 MCQs MARCH UPDATE + LABs + SCENERIO MARCH UPDATE
Working VCE Player
All lab topologies to practice in GNS3
Helping material / tips that are needed to pass this exam easily

If anyone interesting let us know
skymax258 at gmail com

gents, can some one summarize what should be relied on to pass the exam?? I read that there are different MCQs (NUQ5 NUQ6 … etc..)

Also where can we find all needed MCQs and Labs

please support.

Hello,

I passed the exam today (985/1000), I got :

– 3 Labs: EIGRP stub, PBR, EIGRP eval
– 6 DNDs: DHCP, adverse network conditions, AAA, Frame-relay component and LMO, TACACS+ACL

All the questions were from this dump (Updated this month with the new questions)

http://online.fliphtml5.com/aggbn/gwck/

@mo_salah
Hi, from what I’ve gathered whilst monitoring the posts in the forum, the questions to practice are MPQ’s (Most Popular Questions) / NUQ (New Updated Questions) 5 and 6 and old questions from Feb / Mar Dumps. I think it depends on the source of your material as to which dumps everyone is referring to. I’ve paid the $15 for the Premium Access on Digitut and there are more than enough questions to prepare you for the exam in my opinion, a combination of old questions and newly update. I must have looked at over 800 questions at least as well as all the DnD’s, the OSPF / EIGRP Eval and the Lab questions.

I can’t actually verify that this will cover every question on the exam, but I would like to think Digitut Premium covers at least 90 percent of the questions you’ll get on the exam. I’ve got my exam in a week, so I hope it’s enough!

@mo_salah
Aw yeah, I’d also like to add that once you become a member, not only can you now see the questions to the answers but you can also practice all the questions and labs etc using the Web based flash player. Not quite as comprehensive as the VCE players you can use but certainly gives you more of an exam feel.

Question:
which three method can a network engineer use to fix a metric-based routing loop in the network? (choose three)
a. implements offsets limits
b. filter routes manually using distribute lists
c. filter routes manually usind prefix lists
d. implement proper network summarization on key routing points
e. filter routes based on tags
f. utilse root database filters

I’m sure about BE but i’m not sure about the third ones (A or D).

Thanks for help!

What is the task you must perform when configuring SSH? (Choose two)

A. Configure TACACS+
B. Configure hostname
C. Generate RSA key
D. Disable telnet

B C

Which two pieces of information can you determine from the output of the show NTP status command?

A. The NTP version number of the peer
B. The configured NTP servers
C. The IP address of the peer to which the clock is synchronized
D. Where the clock is synchronized

C D

You are implementing WAN access for an enterprise network while running applications that require a fully meshed network, which two design standards are appropriate for such an environment?

A. A centralized DMVPN solution to simplify connectivity for the enterprise
B. A dedicated WAN distribution layer to consolidate connectivity to remote sites
C. A collapsed core and distribution layer to minimize costs
D. Multiple MPLS VPN connections with static routing
E. Multiple MPLS VPN connections with dynamic routing

A B

Which task do you need to perform first when you configure IP SLA to troubleshoot a network connectivity issue?

A. Specify the test frequency
B. Enable the ICMP echo operation
C. Schedule the ICMP echo operation
D. Verify the ICMP echo operation

B

Which technology can combine multiple physical switches into one logical switch?

A. HSRP
B. VSS
C. VRRP
D. NHRP

Which two features are compatible with port security?

A. Voice VLAN
B. SPAN source port
C. DTP

What are two reasons to use multicast to deliver video traffic, instead of unicast or broadcast?

A. It provides reliable TCP transport
B. It enable multiple servers to send video streams simultaneously
C. It enable multiple clients to send video streams simultaneously
D. It supports distributed applications
E. It enable multiple clients to receive video streams simultaneously

D E

Which two statements about PAP authentication in a PPP environment are true?

A. It is performed at the beginning of the session only
B. It sends the password in clear text
C. It uses a username with an MD5 password to authenticate
D. It hashes the password before sending it
E. It is performed at the beginning of the session and is repeated periodically for as long as the session is maintained

B E

Which two tasks should you perform to begin troubleshooting a network problem?

A. Gather all the facts
B. Define the problem as a set of symptoms and causes
C. Implement an action plan
D. Monitor and verify the resolution
E. Analyze the results

A B

Which two pieces of information can you learn by viewing the routing table?

A. Whether an ACL was applied inbound or outbound to an interface
B. Whether the administrative distance was manually or dynamically configured
C. Which neighbor adjacencies are established
D. The EIGRP or BGP autonomous system
E. The length of time that a route has been known

E B

Which two facts must you take into account when you deploy PPPoE interface?

A. DDR idle timers must be configured to support VPDN loggin
B. PPPoE supports a maximum of 10 clients per customer premises equipment
C. DDR is not supported
D. You must manually configure IP addresses on the PPPoE interface
E. An individual PVC can support one PPPoE client

B E

Which fallback method can you configure to allow all AAA authorization requests to be granted if the other methods do not respond or return an error?

A. Radius
B. Enable
C. TACACS+
D. NONE

D

By default what is the maximum number of equal metric path BGP uses for load balancing?

Up to a maximum of 6

Which difference in the packet fragmentation feature between IPv4 and IPv6 is true?

There is no fragmentation in IPv6 because it uses Path MTU Discovery in order to find the smallest packet size to the destination.

Which LAN features enable a default gateway to inform it’s end devices when a better path to a destination is available?

ICMP redirect

The track objects in IP SLA and make sure that it is only up if all track objects are up, which method achieves that goal?

A. AND
B. OR
C. XOR
D. ???

A

With PCA and PCB and there are three routers between them and a different MTU value and they want a PCA to run an application with PCB and DF is set so we have to choose?

A. MSS
B. PMTU
C. GRE
D. ???

A

What are two reasons to use multicast to deliver video traffic, instead of unicast or broadcast?

A. It provides reliable TCP transport
B. It enables multiple servers to send video streams simultaneously
C. It enables multiple clients to send video streams simultaneously
D. It supports distributed applications
E. It enables multiple clients to receive the video streams simultaneously

D E

Which two statements about PAP authentication in a PPP environment are true?

A. It is performed at the beginning of the session only
B. It sends the password in clear text
C. It uses a username with an MD5 password to authenticate
D. It hashes the password before sending it
E. It is performed at the beginning of the session and is repeated periodically for as long as
the session is maintained

B E

Which two tasks should you perform to begin troubleshooting a network problem?

A. Gather all the facts
B. Define the problem as a set of symptoms and causes
C. Implement an action plan
D. Monitor and verify the resolution
E. Analyze the results

A B

Which two pieces of information can you learn by viewing the routing table?

A. Whether an ACL was applied inbound or outbound to an interface
B. Whether the administrative distance was manually or dynamically configured
C. Which neighbor adjacencies are established
D. The EIGRP or BGP autonomous system
E. The length of time that a route has been known

E B

Which two facts must you take into account when you deploy PPPoE?

A. DDR idle timerdws must be configured to support VPDN loggin
B. PPPoE supports a maximum of 10 clients per customer premises equipment
C. DDR is not supported
D. You must manually configure IP addresses on the PPPoE interface
E. An individual PVC can support one PPPoE client

B E

Which two features are compatible with port security?

A. Voice VLAN
B. SPAN source port
C. DTP

Which task do you need to perform first when you configure IP SLA to troubleshoot a network connectivity issue?

A. Specify the test frequency
B. Enable the ICMP echo operation
C. Schedule the ICMP echo operation
D. Verify the ICMP echo operation

B

Drag and Drop

A. TLL when reaches ‘0’ drops packets
B. ICMP Redirect indicate to host that another route is available for a specific
destination
C. ICMP unreachable when destination is unreachable when IP is unable to give a
packet to destination host due to some problem or issue
D. ???
E. ???

How to implement local authentication using a list for case insensitive usernames.

When does a Cisco router send an ICMP redirect?

A. When the source and destination in the same subnet.
B. When the packet is sourwdce-routed.
C. When the packet’s destination has load-balanced entries in the route table.
D. When the packet’s ingress and egress interface are different.

A

Hello Everyone, Passes my Exam today with 94*/100

3 Labs:
– EIGRP /OSPF Redistribution/
– Eigrp Stub/
– OSPF Stub

4 Drag and Drop: Framrelay LMI / Loose/Strick Mode/ACL/GRE

Without Stars**
http:/*/ow*.ly/2NXB101z3Nk

Which two pieces of information can you learn by viewing the routing table?

A. Whether an ACL was applied inbound or outbound to an interface
B. Whether the administrative distance was manually or dynamically configured
C. Which neighbor adjacencies are established
D. The EIGRP or BGP autonomous system
E. The length of time that a route has been known

E B

Which two facts must you take into account when you deploy PPPoE?

A. DDR idle timerdws must be configured to support VPDN loggin
B. PPPoE supports a maximum of 10 clients per customer premises equipment
C. DDR is not supported
D. You must manually configure IP addresses on the PPPoE interface
E. An individual PVC can support one PPPoE client

B E

Cleared CCNP Route 8XX score….. No new question….

@Ishu Nabi
What questions where on the lab and the D&D questions?

I failed yesterday with 11 points short! Majority of questions are here but there were new questions which I can’t remember in details. Joined premium membership today but can’t find those questions in update 6.

@2064

Check out questions @306 page, did you see any of these questions on your test? I fail test by 11 points too.

Share a test method that helps me pass CCNP 300-101 quickly and smoothly
http://www.reddit.com/user/davis0519/comments/bi6lq2/stable_and_effective_ccna_ccnp_ccie_cissp_dump/?utm_source=ltredit

Which task do you need to perform first when you configure IP SLA to troubleshoot a network connectivity issue?

A. Specify the test frequency
B. Enable the ICMP echo operation
C. Schedule the ICMP echo operation
D. Verify the ICMP echo operation

B

Which technology can combine multiple physical switches into one logical switch?

A. HSRP
B. VSS
C. VRRP
D. NHRP

Which two features are compatible with port security?

A. Voice VLAN
B. SPAN source port
C. DTP

What are two reasons to use multicast to deliver video traffic, instead of unicast or broadcast?

A. It provides reliable TCP transport
B. It enable multiple serversq to send video streams simultaneously
C. It enable multiple clients to send video streams simultaneously
D. It supports distributed applications
E. It enable multiple clients to receive video streams simultaneously

D E

Hello Everyone, Passes my Exam today with 94*/1000

3 Labs:
– EIGRP /OSPF Redistribution/
– Eigrp Stub/
– OSPF Stub

4 Drag and Drop: Framrelay LMI / Loose/Strick Mode/ACL/GRE

Without Stars**
http:/*/ow*.ly/2NXB101z3Nk

-When does a Cisco router send an ICMP redirect?(take care here ingress and egress interface are different not as the dump)
A. when the source and destination in the same subnet
B. when the packet is source-routed
C. when the packet`s destination has load-balanced entries in the route table
D. when the packet`s ingress and egress interface are different

Answer: A

4-order the OSPF acording to path type selection
A-intra area ,inter area , ,NSSA Type 1 and NSSA Type 2 External Type 1 ,External Type 2
B-inter area ,intra area , External Type 1 ,External Twype 2 ,NSSA Type 1 and NSSA Type 2
C-intra area ,inter area , ,External Type 1 ,External Type 2 NSSA Type 1 and NSSA Type 2
D-inter area ,intra area , NSSA Type 1 and NSSA Type 2 External Type 1 ,External Type 2

Answer: C