Share your ROUTE v2.0 Experience
| Note: The last day to take this ROUTE 300-101 exam is February 23, 2020. After this day you have to take new Enterprise exams to get new CCNP Enterprise certification. If you want to find out more about the new exams please visit here. |
The ROUTE 300-101 (ROUTE v2.0) exam has been used to replace the old ROUTE 642-902 exam so this article is devoted for candidates who took this exam sharing their experience.
Please tell with us what are your materials, the way you learned, your feeling and experience after taking the ROUTE v2.0 exam… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note: Posting email is not allowed in the comment section.
Your posts are warmly welcome!
Hi
My CCNP test is only 3 days away.
I’m not sure that the dumps I have are valid, so I need your help.
Please share the dump.
Thanks.
niellen2019 at gmail dot com
I’ll pass my exam in 2 hours, any advice please.
@Zero Zero
I’m sorry but they deleted my post.
@Mody,
¿What dumps do you use for your exam?
Hello Colleagues
Can someone share with me VCE latest dump
Best Regards
WWDT
Hello Colleagues
Can someone share with me VCE latest dump
Please send to wwdt dot cisco at gmail dot com
Best Regards
WWDT
HI,
i had exam and i fail.
A lot of new questions (7-8)
Drag:
– aaa radius auth/authorization/acconting
– aaa krb5 goups ecc
– chap pap
– ipv6
LAB:
– eigrp ospf redistribute
– pbr
– eigrp evaluation
Guys where can i get valid dumps?
@Gin
Yes, the correct answer is B.
@Anonymous
did
Can you remember any new questions? I have post some questions on page 303. Did you see any of these questions on your test?
@Anonymous
What dumps do you used?
i am studying of the dumps ROUTE_Mar_2019 and i not sure if these dump is valid?
Hi guys,
i’m anonymous texted before.
I don’t remember the questions at all because i was really agitated and upset!
I used the VCEpremium on Vce plus and digital tut premium.
The thing i’m sure that during the night it was and update of the exams in general because the guy told me and one my friend did the same exam only 1 week before and except the labs was completely different.
Where can i get valid dumps? Please paste the link
3-When does a Cisco router send an ICMP redirect?(take care here ingress and egress interface are different not as the dump)
A. when the source and destination in the same subnet
B. when the packet is source-routed
C. when the packet`s destination has load-balanced entries in the route table
D. when the packet`s ingress and egress interface are different
Answer: A
4-order the OSPF acording to path type selection
A-intra area ,inter area , ,NSSA Type 1 and NSSA Type 2 External Type 1 ,External Type 2
B-inter area ,intra area , External Type 1 ,External Type 2 ,NSSA Type 1 and NSSA Type 2
C-intra area ,inter area , ,External Type 1 ,External Type 2 NSSA Type 1 and NSSA Type 2
D-inter area ,intra area , NSSA Type 1 and NSSA Type 2 External Type 1 ,External Type 2
Answer: C
sitting in a tree lying about their free dumps.
today is good day
@Saji and @Scolari
A packet capture indicates that the router is not forwarding the DHCP packets that it
receives on interface FastEthernet0/0. Which command needs to be entered in global
configuration mode to resolve this issue?
A. IP helper- address
B. IP DHCP relay
C. Service DHCP
D. IP forward-protocol
B C or D which is the correct answer?
C
Can someone provide me the latest dumps..my mail id is phaniraj0808 at gmail
Is the premium dump valid?
Sorry, but I don’t know what is version 2 of redist lab. Could you help me?
Thanks
Hi CCNP route,
Anyone who recently wrote today can advise or point which Dumps to use.
18. A route map was configured and it was distributing OSPF external routes?
A. Distributing E1 only
B. Distributing E1 and E2 using prefix lists
C. Distributing E1 and E2 using ACL
D. Distributing E2 routes
I think it is B – Access list is for traffic filtering & prefix list is for route filtering
The dumps from examcollection does’n valid !!! I buy there Premium File 189 Questions & Answers and twice at examination there were only 1-2 questions from this dump. This is just for infirmation.
@Zero Zero,
B-> IP DHCP RELAY INFORMATION policy —-> Define re-forwarding policy, we can use this global configuration mode command to replace / re-define the another relay agent’s messages.
Hi
today i pass the exam 9xx/1000.
i used 769q (its easy to fin it, dont ask me to send it to you~)
Question – 769q is covered but i found 8-9 new question
DD – BGP State , IPV6 NAT , Frame-relay , TACACS+
Lab – PBR , Redistribute , OSPF
* The examination may be changed.
* Nothing comes easy, you have to put the time in – Good luck bro.
@An4rchy,
what file have you used? The Dexter or the PassLeader questions.
Unfortunately all other sites are down except the ROUTE website….
passed the exam today, LAB and DD from this site are valid. There were new questions though, had studied all question on this site and 7/15 composite quizes , not sure which q category on the site included most , recommend to practice all composite quizes as well as the rest of Qs on this site, it helps.
LAB, PBR, redistribution, OSPF evaluation simulator
@Arhsama thanks for this udpate. How many new questions did you recognize? Approximately – were there 5-7 new questions or plenty of them (like 15 let’s say)?
Is this answer correct?
Which location within the network is preferred when using a dedicated route for Cisco IP SLA operations?
A. User edge
B. Provider edge
C. Access edge
D. Distribution edge
D
@Saji and @Scolari
A packet capture indicates that the router is not forwarding the DHCP packets that it
receives on interface FastEthernet0/0. Which command needs to be entered in global
configuration mode to resolve this issue?
A. IP helper- address
B. IP DHCP relay
C. Service DHCP
D. IP forward-protocol
B C or D which is the correct answer?
@ZeroZero, i think the answer is Provider Edge. Read in oue of the dumps
@Dennis
may be the answer is B, because you are redistributing eigrp routes into RIP and not the other way round
Which routes will be injected into the routing protocol?
access-list 1 permit 1.0.0.0.0 0.255.255.255
router rip
default metric 1
redistribute eigrp 20
distribute-list 1 out eigrp 20
A. Any routing update with a metric of 1
B. the EIGRP 20 routers into RIP the match access list 1
C. the RIP routes into EIGRP 20 the match access list 1
D. All RIP routes into EIGRP 20
B or C is correct ??
Is this answer correct?
Customer enabled new link to partner using RIPng, how and where is RIPng configured?
A. router mode
B. interface mode
C. global – (config) #ipv6 router rip RIPNG
Answer: C
Can someone explain the answers to these questions?
30. A network engineer enables OSPF on a Frame Relay WAN connection to various remote sites, but no OSPF adjacencies come up. Which two actions are possible solutions for this issue? (Choose Two)
A. Change the network type to point-to-multipoint under WAN interface
B. Enable virtual links
C. Change the network type to nonbroadcast multipoint access
D. Configure the neighbor command under OSPF process for each remote site
E. Ensure that the OSPF process number matches among all remote sites
Answer: A D
31. If you convert a WAN connection with OSPF from T1 to a Frame Relay circuit, which two actions must you take to enable the connection? (Choose two)
A. Change the OSPF network type to non-broadcast.
B. Manually configure neighbors in the OSPF process.
C. Manually configure the hello and dead timers.
D. Change the OSPF network type to broadcast.
E. Change the OSPF network type to multipoint non-broadcast.
Answer: A B
Ccna 200 125 site is also down!!
Can any one tell us what the problem with the certpraper and networktut???????
@Zero Zero
Can you please share your dumps / point to where can we download valid dumps.
thanks for informing us
Hi guys. I passed the Route Exam today with 839.
I got at 12 – 13 Drag and Drops (Copp, aaa, router tacacs, ipv6 server client, network conditions, ACL types, BGP states, Adjacency types, PAP/ Chap, Frame Relay) also a couple of new ones.
I also got the PBR, EIGRP/ OSPF Redistribution, and OSPF SIM.
I recommend studying the New Updated Question Part 5 and 6 also the Most Popular Questions and all of the Drag and Drops. That alone should get a pass, but they have started to recycle some of the old questions so worth glancing over them before your test.
Good luck everyone.
Thanks DigitalTut.
Does any body know about a question for logical operators and, or, xor for the exam?
I’ve failed my exam on last friday, indeed new questions, some of them posted in the last pages, some of them new (redistribute bgp into ospf?) and indeed old frame relay again (why oh my why…), some pppoe and also radius and tacacs questions (padi ?). The sims are indeed the same, the PBR sim didn’t work properly, althought the configuration was exactly as described here.
Also questions on kerbebos and pap, and questions on pppoe padi pado padr pads.Strangely almost no ipv6 questions or ipv6 natting this time, only dual stack.
Hi @LivingTheNetworkDream,
¿where can we find the New Updated Question Part 5 and 6?
@LivingTheNetworkDream
New Update Questions and New Route Questions is the same?
Failed exam today about 30 new questions impossible to pass with March digitaltut pdf. Please update for April and May…Does anyone have any suggestions?????
@Exam Update
I have post some new questions of @303. Are any of these questions on the test?
hey,
Is the latest issue of this site on the exam?
today si good day
@exam update failed
Did you review MPQ, NUQ5 and NUQ6.?