Share your ROUTE v2.0 Experience

who ever said they have dump and just passed followed by whatspp invite to a group with https:/*/go*o.g*l/nX2X33 are scammers, eventually will request payments. no more fun sharing over here as its full with scammers using different nicks.

Guys, I see that one of actual exam LAB is EIGRP OSPF Redistribution Sim. Several of you posted ‘No2’. What does it mean – do you mean Redistribution lab version with ‘distance eigrp 90 105’ option to be configured?

@genius, yes you have to /10 the delay
if on the interface is 1000 you put 100, if its 100 you put 10 etc etc

@kopi,

What are two limitations when in use of NPTv6 for IPV6 vs IPV6 Address translation? (Choose two)
A. stateful address translation
B. a limit of 32 1-to-1 translations
C. lack of overloading functionality –> agreed correct answers
D. identify all interfaces as NAT inside or outside
E. 1-to-1 prefix rewrite –> My second choice
F. mismatched prefix allocations -> Question about limitation that mean if u having mismatch prefix allocations mean it is an advantage. If your were to be selected this as a Choice, then it should be “matched prefix allocation or prefix size need to matched.

Note: NPTv6 is simply rewriting IPv6 prefixes. If your current IPv6 prefix is 2001:db8:cafe::/48 then using NPTv6 it would allow you to change it to 2001:db8:fea7::/48 – that is it. It is a one for one prefix rewrite – you can’t overload it, have mismatching prefix allocations sizes, re-write ports or anything else. Importantly, it doesn’t touch anything other than the prefix. Your network/host portion remains intact with no changes.

https!!!!!!://www.howfunky.!!!!!!com/2012/02/ipv6-to-ipv6-network-prefix-translation.!!!!!!html

Any idea?

people who follow this page know me already, I am real!
passed today with 8xx! 55 questions (including labs and DD) ~2-3 new questions only that I haven’t seen,not a big deal.

Labs – EIGRP OSPF distribution, PBR, OSPF sim
DD – dont remember exactly, cause there were 5 or 6, but all are here in digitaltut, no surprises about that

about the EIGRP OSPF dis lab –
case 2, no issues, everything worked as it is here in digitaltut, simple

PBR lab –
I was not able to set next-hop as interface, the option was not available so set an IP
before the exam I didnt know in what way the HRPP traffic will be generated for test… dont worry, on the test work station there is a button that you hit and its start spitting HTTP packets then you just follow on the route-map if counters increase, simple

OSPF sim –
you CAN use “show ip opsf data” (saying it cause some people here were saying that the command is not permeated) , but you can NOT use “show runn” !
R4 is a ASBR as you will find alone from “show ip ospf” .. still I coundt see LSA4 on R5… that question confused me.. anyway

to all!
do not listen to bulshits like “there are a lot of new questions” bla bla bla
all questions that I got were from digitaltut premium and passleader (its easy to fin it, dont ask me to send it to you~) etc, nothing new, nothing unknown!!! the pool of available questions is huge so study well and do not trust dumps on 100%, if you are not sure about something or you dont understand it – do your own research! you can not pass the exam if you try to memorize questions, it simple doesnt work like that! follow this page for 2-3 weeks bofere the exam and see what new questions people share and you will be 100% ready!

good luck to all! and f@ck 0ff to all fake spammers here!

Has anyone used the route_march_2019 that has tested lately, if yes, confirm validity.

@tekyla
WHAT IS THE BENEFITS OF SECTION PREMIUM OF DIGITALTUT?

these dumps is still valid?
ROUTE_Jan_2019.pdf
ROUTE_Mar_2019.pdf

i will take the route exam the next april 30 and i not sure of which dumps is still valid,
please someone help me.

@kopi

In the PBR lab what alternative did you use when ip next-hop didn’t work ?

@Kopi
“do not listen to bulshits like “there are a lot of new questions” bla bla bla a”

Please don’t spread this fake news as there are a lot of questions. Around 10-14 new questions. Do not base it on your own experience alone as there are many people relying on updates from digitaltut. Guys, just study well but expect a lot of new questions.

^ sir above can u remember that new questions?

Hi guys!
Can I get the dumps you share now?

I want to see you.
Send me the latest dump.
:: sugericern at gmail dot com

Thanks.
Best Regards

Hello, everyone.
The CCNP test is only a week away.
Please share the dump.
Please help me.
Thank you.
017sin at gmail dot com

Hi @kopi, thanks for your update

‘I was not able to set next-hop as interface, the option was not available so set an IP’ – what to do then? Any other command to use? Just ‘set ip 10.1.101.1’?

New Questions CCNP Route 300-101 ( I am not sure about some answers)

What is the task you must perform when configuring SSH? (Choose two)

A. Configure TACACS+
B. Configure hostname
C. Generate RSA key
D. Disable telnet

B C

Which two pieces of information can you determine from the output of the show NTP status command?

A. The NTP version number of the peer
B. The configured NTP servers
C. The IP address of the peer to which the clock is synchronized
D. Where the clock is synchronized

C D

You are implementing WAN access for an enterprise network while running applications that require a fully meshed network, which two design standards are appropriate for such an environment?

A. A centralized DMVPN solution to simplify connectivity for the enterprise
B. A dedicated WAN distribution layer to consolidate connectivity to remote sites
C. A collapsed core and distribution layer to minimize costs
D. Multiple MPLS VPN connections with static routing
E. Multiple MPLS VPN connections with dynamic routing

A B

Which task do you need to perform first when you configure IP SLA to troubleshoot a network connectivity issue?

A. Specify the test frequency
B. Enable the ICMP echo operation
C. Schedule the ICMP echo operation
D. Verify the ICMP echo operation

B

Which technology can combine multiple physical switches into one logical switch?

A. HSRP
B. VSS
C. VRRP
D. NHRP

Which two features are compatible with port security?

A. Voice VLAN
B. SPAN source port
C. DTP

What are two reasons to use multicast to deliver video traffic, instead of unicast or broadcast?

A. It provides reliable TCP transport
B. It enable multiple servers to send video streams simultaneously
C. It enable multiple clients to send video streams simultaneously
D. It supports distributed applications
E. It enable multiple clients to receive video streams simultaneously

D E

Which two statements about PAP authentication in a PPP environment are true?

A. It is performed at the beginning of the session only
B. It sends the password in clear text
C. It uses a username with an MD5 password to authenticate
D. It hashes the password before sending it
E. It is performed at the beginning of the session and is repeated periodically for as long as the session is maintained

B E

Which two tasks should you perform to begin troubleshooting a network problem?

A. Gather all the facts
B. Define the problem as a set of symptoms and causes
C. Implement an action plan
D. Monitor and verify the resolution
E. Analyze the results

A B

Which two pieces of information can you learn by viewing the routing table?

A. Whether an ACL was applied inbound or outbound to an interface
B. Whether the administrative distance was manually or dynamically configured
C. Which neighbor adjacencies are established
D. The EIGRP or BGP autonomous system
E. The length of time that a route has been known

E B

Which two facts must you take into account when you deploy PPPoE interface?

A. DDR idle timers must be configured to support VPDN loggin
B. PPPoE supports a maximum of 10 clients per customer premises equipment
C. DDR is not supported
D. You must manually configure IP addresses on the PPPoE interface
E. An individual PVC can support one PPPoE client

B E

Which fallback method can you configure to allow all AAA authorization requests to be granted if the other methods do not respond or return an error?

A. Radius
B. Enable
C. TACACS+
D. NONE

D

By default what is the maximum number of equal metric path BGP uses for load balancing?

Up to a maximum of 6

Which difference in the packet fragmentation feature between IPv4 and IPv6 is true?

There is no fragmentation in IPv6 because it uses Path MTU Discovery in order to find the smallest packet size to the destination.

Which LAN features enable a default gateway to inform it’s end devices when a better path to a destination is available?

ICMP redirect

The track objects in IP SLA and make sure that it is only up if all track objects are up, which method achieves that goal?

A. AND
B. OR
C. XOR
D. ???

A

With PCA and PCB and there are three routers between them and a different MTU value and they want a PCA to run an application with PCB and DF is set so we have to choose?

A. MSS
B. PMTU
C. GRE
D. ???

A

What are two reasons to use multicast to deliver video traffic, instead of unicast or broadcast?

A. It provides reliable TCP transport
B. It enables multiple servers to send video streams simultaneously
C. It enables multiple clients to send video streams simultaneously
D. It supports distributed applications
E. It enables multiple clients to receive the video streams simultaneously

D E

Which two statements about PAP authentication in a PPP environment are true?

A. It is performed at the beginning of the session only
B. It sends the password in clear text
C. It uses a username with an MD5 password to authenticate
D. It hashes the password before sending it
E. It is performed at the beginning of the session and is repeated periodically for as long as
the session is maintained

B E

Which two tasks should you perform to begin troubleshooting a network problem?

A. Gather all the facts
B. Define the problem as a set of symptoms and causes
C. Implement an action plan
D. Monitor and verify the resolution
E. Analyze the results

A B

Which two pieces of information can you learn by viewing the routing table?

A. Whether an ACL was applied inbound or outbound to an interface
B. Whether the administrative distance was manually or dynamically configured
C. Which neighbor adjacencies are established
D. The EIGRP or BGP autonomous system
E. The length of time that a route has been known

E B

Which two facts must you take into account when you deploy PPPoE?

A. DDR idle timers must be configured to support VPDN loggin
B. PPPoE supports a maximum of 10 clients per customer premises equipment
C. DDR is not supported
D. You must manually configure IP addresses on the PPPoE interface
E. An individual PVC can support one PPPoE client

B E

Which two features are compatible with port security?

A. Voice VLAN
B. SPAN source port
C. DTP

Which task do you need to perform first when you configure IP SLA to troubleshoot a network connectivity issue?

A. Specify the test frequency
B. Enable the ICMP echo operation
C. Schedule the ICMP echo operation
D. Verify the ICMP echo operation

B

Drag and Drop

A. TLL when reaches ‘0’ drops packets
B. ICMP Redirect indicate to host that another route is available for a specific
destination
C. ICMP unreachable when destination is unreachable when IP is unable to give a
packet to destination host due to some problem or issue
D. ???
E. ???

How to implement local authentication using a list for case insensitive usernames.

When does a Cisco router send an ICMP redirect?

A. When the source and destination in the same subnet.
B. When the packet is source-routed.
C. When the packet’s destination has load-balanced entries in the route table.
D. When the packet’s ingress and egress interface are different.

A

Define:

A. IP NHRP redirect
B. IP NHRP static

C.IP NHRP (map)
D.IP NHRP (shortcut)

I wanted to use “set ip next-hop interface [int]” , but that option was NOT available, so used “set ip next-hop [next hop IP]” – simple

I had digitaltut premium and that really helped me a lot for my preparation

I can not tell you for sure if all the questions that I got were from MPQ or from the Passleader (version 18.212) cause they cover more or less and I went tru them couple of times and my head got messy in the end, but its a fact that the questions that I got on the exam I was familiar with 40-45 of them already! 2 or 3 new only! study study study, and dont trust dumps, there are errors!

Not Sure About the Answer Questions?

Refer to the Following: Logging Console 7

1. Which option is one of the effects entering this command on a CISCO ISO router with no
additional logging configuration?

A. Debug messages can be seen on the console by enabling “terminal monitor”
B. A user that is connected via SSH sees level 7 messages
C. Debug messages are only logged on Active Console Connections
D. The router can experience high CPU utilization

C

2. Customer enables new link to partner using RIPng, how and where is RIPng configured?

A. Router mode
B. Interface mode
C. Global

B

3. A network engineer is enabling RIPng on a new customer link under which configuration mode is RIPng enabled?

A. Global
B. Router
C. Interface
D. IPv6

C

4. If you want to migrate to IS-IS network to another routing protocol with? (Two chooses not given)

A. UDP
B. EIGRP
C. OSPF
D. RIP
E. Internal BGP
F. TCP/IP

BC

5. OSPF routers that communicate with other network routers like EIGRP are called?

A. ASBR
B. ABR
C. Backbone
D. Internal

A

6. Which adverse circumstances can the TLL feature prevent?

A. Routing Loop
B. DoS attacks
C. Link saturation
D. CAM table overload

A

7. Which location within the network is preferred when using a dedicated route for Cisco IP SLA operations?

A. User edge
B. Provider edge
C. Access edge
D. Distribution edge

D

8. How can you minimize unicast flooding in a network?

A. Configure HSRP on two routers, with one subnet preferred on the first router and a different subnet preferred on the second router.
B. Set the router’s ARP timeout value to be the same as the timeout value for Layer 2 forwarding table entries.
C. Set the router’s ARP timeout value to greater than the timeout value for Layer 2 forwarding table entries.
D. Set the router’s ARP timeout value to less than the timeout value for Layer 2 forwarding table entries.

D

9. Which two causes of latency are true? (Choose two)

A. High bandwidth on a link
B. Split horizon
C. Propagation delay
D. Serialization delay
E. Under- utilization of a link

C D

10. Which two statements about DMVPN are true? (Choose two)

A. IPsec encryption not supported with statically addressed spokes.
B. It requires full-mesh connectivity on the network.
C. It uses NHRP to create a mapping database of spoke addresses.
D. Multicast traffic is not supported.
E. It supports dynamic addresses for spokes in a hub and spoke VPN topology.

C E

11. In which scenario can asymmetric routing occur?

A. Active/active firewall setup
B. Single path in and out of the network
C. Active/standby firewall setup
D. Redundant routers running VRRP

A

12. A packet capture indicates that the router is not forwarding the DHCP packets that it
receives on interface FastEthernet0/0. Which command needs to be entered in global
configuration mode to resolve this issue?

A. IP helper- address
B. IP DHCP relay
C. Service DHCP
D. IP forward-protocol

C

14. OSPF has R1 router ID 172.18.1.1. What happens when R1 configure with a new loopback
interface IP address 172.17.1.1?

A. OSPF chooses 172.17.1.1 as new router ID when R1 is rebooted.
B. OSPF chooses 192.168.21.0 as new router ID when apply new configuration.
C. OSPF chooses 172.17.1.1 as new router ID when apply new configuration.
D. OSPF retains 172.18.1.1 as router ID until interface on which it is configured goes down.

D

16. Which type of information is displayed when a network engineer executes the show track 1
command on the router?

A. Information about tracking list 1
B. Time to next poll for track object 1
C. Information about the IP route track table
D. Tracking information statistics

D

17. Company is deploying a multicast application that must be accessible between sites, but
must not be accessible outside of the organization. Based on the scoping requirements, the
multicast group address for the application will be allocated out which range?

A. FF00://16
B. FF0E://16
C. FF02://16
D. FF08://16

D

18. A route map was configured and it was distributing OSPF external routes?

A. Distributing E1 only
B. Distributing E1 and E2 using prefix lists
C. Distributing E1 and E2 using ACL
D. Distributing E2 routes

C

19. All neighbor routers are in the BGP peer group name PEER-1. All passwords are confirmed
as Cisco. These messages are logged to the console of router DSW1 which is peering with
router CORE. Which two configurations allow a peering session to form between DSW1 and
the CORE? (Choose two)

A. Core(config-router)#neighbor 5.0.0.5 peer-group PEER-1
Core(config-router)#neighbor PEER-1 password cisco

B. DSW1(config-router)#neighbor 5.0.0.5 peer-group PEER-1
DSW1(config-router)#neighbor PEER-1 password cisco

C. DSW1(config-router)#neighbor 51.51.51.1 peer-group PEER-1
DSW1(config-router)#neighbor PEER-1 password cisco

D. Core(config-router)#neighbor 51.51.51.1 peer-group PEER-1
Core(config-router)#neighbor PEER-1 password cisco

E. Core(config-router)#neighbor 5.0.0.5 peer-group PEER-2
Core (config-router) #neighbor PEER-1 password cisco

B D

20. What are limitations of Stateful NAT64?

A. Lacks in end-to-end address transparency
B. No requirement on the nature of IPv6 address assignment

21. An engineer has to enable RIP on a link. Where he will issue the command?

A. interface sub command
B. IPv6
C. Router Sub Command
D. Global

D

22. When does a Cisco router send an ICMP redirect? (take care here ingress and egress
interface are different not as the dump)

A. When the source and destination are in the same subnet
B. When the packet is source-routed
C. When the packet’s destination has load-balanced entries in the route table
D. when the packet’s ingress and egress interface are different

A

23. Which BGP option is required when load sharing over multiple equal-bandwidth parallel
from a single CE router to a single ISP router over eBGP?

A. eBGP Multipath
B. eBGP Multihop
C. BGP Synchronization
D. Public AS numbers

A

24. Which two statements about NHRP in DMVPN environment are true?

A. It requires each endpoint to have a unique network ID
B. It routes traffic through the tunnel
C. It can identify PIM-SM RPs over tunnel
D. It can authenticate VPN endpoints
E. It provides address resolution to route traffic

D E

25. What are two limitations when in use of NPTv6 for IPv6 versus IPv6 Address translation? (Choose two)

A. Stateful address translation
B. A limit of 32 one to one translation
C. Lack of overloading functionality
D. Identify all interface as NAT inside and outside
E. One to one prefix rewrites
F. Mismatched prefix allocations

C E

@Zero Zero,
few of the questions that you share I haven’t seen and they look new really , the 50% are defiantly not new really-

I got those –
By default what is the maximum number of equal metric path BGP uses for load balancing?
Which difference in the packet fragmentation feature between IPv4 and IPv6 is true?
The track objects in IP SLA and make sure that it is only up if all track objects are up, which method achieves that goal?

This one too, but I wont call it new –
Which LAN features enable a default gateway to inform it’s end devices when a better path to a destination is available?

Hi @kopi

‘I was not able to set next-hop as interface, the option was not available so set an IP’ – what to do then? Any other command to use? Just ‘set ip 10.1.101.1’?

@Peter

I am thinking “set interface” command might work ?? What you guys think

“set ip next-hop [int]” do NOT work
so just use “set ip next-hop [next IP]” as it is explained here already

@Kopi, one dude,

Will the questions in the premium section not be by chance included in the Passleader file?

Hello
Refer to the following command.
Logging Console 7
Which option is one of the effects entering this command on a Cisco IOS router, with no additional logging configuration?
A. Debug messages can be seen on the console by enabling ―terminal monitor‖
B. Debug messages are logged only on active console connections.
C. A user that is connected via SSH sees level 7 messages
D. The router can experience high CPU utilization

B or D?

Which dumps is still valid
i will take ccnp route exam the next 30 april please help

i don’t wanna lose the money

@kopi and other guys saing that: referring to OSPF/EIGPR Redistribute LAB. By ‘case 2’, do you mean an option with ‘distance eigrp 90 105’ to be configured? Which indicate that interface between R2 and R3 is FastEthernet link?

@STAN,

Refer to the following command.
Logging Console 7
Which option is one of the effects entering this command on a Cisco IOS router, with no additional logging configuration?
A. Debug messages can be seen on the console by enabling ―terminal monitor‖
B. Debug messages are logged only on active console connections.
C. A user that is connected via SSH sees level 7 messages
D. The router can experience high CPU utilization

A-> If console logging is enabled, Debug messages(Level 7)are always sent to console so no need any command — incorrect
B->always sent to console but it says “ONLY” that is incorrect because by entering terminal monitor it can be seen on vty lines too.
C->By default it sent to console. user must enter terminal monitor command in order to see the level 7 (debug messages)
D-> left over answer – correct

@STAN
D-> if “no logging console” is configured, device will not create any debug messages it would save CPU hit

do anyone have voucher or promo code for 300-101?

What dump is still valid?

Passed 9xx . CCNP Now :)

Thanks to digitaltul . Guys make sure you get the premium membership. I only had like 4 questions that I never saw before. Lab PBR, Route Redistribution(case 2), OSPF Eval same as here.

Three of the questions that I can remember are,

1. What is the IETF successor for NAT-PT. I selected NAT64 ( Not sure about the answer)
2. What IP SLAs steps should you select for network applications. There was one answer that started with baseline the requirement. So I chose that one. Again not sure about the answer.
3. Another question was which protocol sort out of order packet at the receiving end. Obviously TCP.

I was a little worried before the exam when ppl were saying there were a lot of new questions. Not true. If you get the labs right you will be fine. Trust me.Goodluck guys !!

What does the following access-list , which is applied on the external interface FastEthernet 1/0 of the perimeter, accomplish?

Router(config)#access-list 101 deny ip 10.0.0.0 0.255.255.255 any log
Router(config)#access-list 101 deny ip 192.168.0.0 0.0.255.255 any log
Router(config)#access-list 101 permit ip any any
Router(config)#interface FastEthernet 1/0
Router(config-if)#ip access-group 101

A. It filter incoming traffic from private addresses range 10.0.0.0-10.0.0.255, 172.16.0.0-172.31.255.255, 192.168.0.0-192.168.255.255 and logs and intrusion.
B. It prevents the internal network from beging used in spoofed denial of service attack and logs any exit to the internet.
C. It prevents private internal addresses to be accessed directly from outside.
D. It filter incoming traffic from private addresses in order to prevent spoofing and logs any intrusion attempts.

Answer is correct ??

A network engineer applies the command: “ip tcp adjust-mss ” under inerface configuration mode. What is the result?

A. The UDP session is inversely affected.
B. The probability of dropped os segmented TCP Packets is descraased.
C. The optimun MTU value for the interface is set.
D. The probability of SYN packet truncation is increased.

Answer : ???

@GIn

B

@gin
What does the following access-list , which is applied on the external interface FastEthernet 1/0 of the perimeter, accomplish? B
A network engineer applies the command: “ip tcp adjust-mss ” under interface configuration mode. What is the result? B

Base on the dumps but not 100% sure.

Which two statements about the enable secret and enable password commands are true? (Choose two)
A. I both commands are missing from the global configuration,vtp lines use the console password
B. The enable secret command overrides enable password

A and B is the answer base on dumps can some one confirm.

@Anonymous

What does the following access-list , which is applied on the external interface FastEthernet 1/0 of the perimeter, accomplish?

Router(config)#access-list 101 deny ip 10.0.0.0 0.255.255.255 any log
Router(config)#access-list 101 deny ip 192.168.0.0 0.0.255.255 any log
Router(config)#access-list 101 permit ip any any
Router(config)#interface FastEthernet 1/0
Router(config-if)#ip access-group 101

A. It filter incoming traffic from private addresses range 10.0.0.0-10.0.0.255, 172.16.0.0-172.31.255.255, 192.168.0.0-192.168.255.255 and logs and intrusion.
B. It prevents the internal network from beging used in spoofed denial of service attack and logs any exit to the internet.
C. It prevents private internal addresses to be accessed directly from outside.
D. It filter incoming traffic from private addresses in order to prevent spoofing and logs any intrusion attempts.

Answer: B is correct ??

@genius

A network engineer applies the command: “ip tcp adjust-mss ” under inerface configuration mode. What is the result?

A. The UDP session is inversely affected.
B. The probability of dropped os segmented TCP Packets is descraased.
C. The optimun MTU value for the interface is set.
D. The probability of SYN packet truncation is increased.

Answer : Dumps is B???
is it correct ??

@genius

A network engineer applies the command: “ip tcp adjust-mss —byte— ” under inerface configuration mode. What is the result?

A. The UDP session is inversely affected.
B. The probability of dropped os segmented TCP Packets is descraased.
C. The optimun MTU value for the interface is set.
D. The probability of SYN packet truncation is increased.

Answer : Dumps is B???
is it correct ??

Which routes will be injected into the routing protocol?

access-list 1 permit 1.0.0.0.0 0.255.255.255
router rip
default metric 1
redistribute eigrp 20
distribute-list 1 out eigrp 20

A. Any routing update with a metric of 1
B. the EIGRP 20 routers into RIP the match access list 1
C. the RIP routes into EIGRP 20 the match access list 1
D. All RIP routes into EIGRP 20

B or C is correct ??

Pls support to me.

Hello everyone. Planning to take my exam next week. Do Tab and ? work in sims?

Hi @leo_CCNP

what dumps do you used?
i will take the exam the 30 april
and i don t wanna lose the money

@DND, Yes they do.

Anyone passed Route exam using the premium membership of Digitaltut recently? Need confirmation of the material’s validity

Hi , Good Luck to everyone.

Would you please past updated 5 and 6 questions here, Thanks.

High every one,
passed the exam today with 9xx it was very easy .just use this site that will be enough to pass . I got same labs, a lot of D&D and nothing new with Qs, just change in some phrases to trick you. I did not get any new Qs

Hello guys! Could you please send me valid dumps at joaobeja14 hotmail dot com? Thanks a lot!

Hi i need dumps please
Farrukhkamal10 at gmail

Hi guys
I’ll take the test next week.
Could you send me the latest valid dump?
please. I am desperate.

My mail is sugericern at gmail.com
Thanks.

bach is good

@Lee

I am having a problem downloading the file; thus, you have it in PDF format?

@Lee

I have download file but there are some wrong answers so be careful!